40 products were found matching your search for kolink in 4 shops:

Featuring a compact size and cost effective design, the Kolink KLM-003 Micro-ATX Case provides a strong solution for business and home office use. The KLM-003 features an attractive brushed aluminium effect front panel with side venting and a 5.25″ drive bay, with internal support for up to a 300mm VGA card & 150mm CPU cooler, alongside ATX power supplies. The Features of the Kolink KLM-003 at a Glance: For motherboards up to M-ATX form factor 5.25″ Drive Bay, with space for 2 x 3.5″ HDD's or 3 x 2.5″ SSD's One pre-installed 80mm fan Supports ATX Power Supplies All black coated interior I/O Panel with 1x USB 3.0, 1x USB 2.0, Audio In/Out Supports 300mm VGA Cards and 150mm CPU Coolers Kolink KLM-003: Compact yet functional The KLM-003 Micro-ATX case is designed to provide a small footprint within your office or home setup. The dimensions are just 365 x 184 x 345 mm in total, however there is plenty of room for your hardware. Graphics cards up to 300mm can be installed, alongside 150mm CPU Coolers and ATX Power supplies. Both Micro-ATX and Mini-ITX motherboards are supported. Storage & cooling covered The KLM-003 Micro-ATX case is designed to provide a small footprint within your office or home setup. The dimensions are just 365 x 184 x 345 mm in total, however there is plenty of room for your hardware. Graphics cards up to 300mm can be installed, alongside 150mm CPU Coolers and ATX Power supplies. Both Micro-ATX and Mini-ITX motherboards are supported. Storage & cooling covered The KLM-003 has space for either 2 x 3.5″ HDD's or 3 x 2.5″ SSD's. There's up to 16mm of cable management space available behind the motherboard tray for more effective routing of power supply cables and there's also space for a 5.25″ device such as an optical drive. A 80mm fan is installed at the rear as standard, with space for a 120mm fan available on the side panel. Functionality aside, the KLM-003 offers a simple yet attractive look with solid steel side panels and a brushed aluminium effect front panel design. The I/O panel is located on the top panel & sports a USB3.0 port, alongside a USB2.0 port. Two 3.5″ jacks for headphones and microphones are available, along with the power button. Specification: Dimensions: 184 x 345 x 365 mm (W x H x D) Weight: approx. 2.9 kg Material: Steel, plastic Colour: Black Form factor: Micro-ATX, Mini-ITX Total possible fans: 1x 120mm (side) 1x 80 mm (rear) Pre-installed: 1x 80 mm (rear) Drive bays: 2x 3.5" HDD or 3x 2.5" SSD PSU: 1x Standard ATX (optional) Expansion slots: 4 I/O Panel: 1x USB 3.0 1x USB 2.0 1x Audio In/Out Max GPU length: approx. 300mm Max CPU Cooler height: approx. 150mm

Kolink is adding another cost effective business and small office option to the range in the form of the Kolink KLA-003. With a clean front panel, featuring a 5.25″ bay and ventilation down the right side, the KLA-003 Midi-Tower is ideal for an office or business environment, featuring a no-nonsense interior with support for 335mm VGA cards, 160mm CPU coolers, up to 2 x 3.5″ HDD or 4 x 2.5″ SSD drives and even space for a 240mm radiator at the front. The Features of the Kolink KLA-003 at a Glance: For motherboards up to ATX form factor 5.25″ Drive Bay, with space for 2 x 3.5″ HDD's or 4 x 2.5″ SSD's One pre-installed 80mm fan Supports ATX Power Supplies All black coated interior I/O Panel with 1x USB 3.0, 2x USB 2.0, Audio In/Out Supports 335mm VGA Cards, 160mm CPU Coolers and a 240mm radiator at the front. Kolink KLA-003: Simplicity meets functional design The KLA-003 is a compact midi-tower with dimensions of 365 x 175 x 410mm, yet has all the room you need for a functional system for the home or office. Alongside the pre-installed 80mm fan at the rear, the KLA-003 supports up to 2 x 120mm fans at the front and a 120mm fan on the side panel, allowing for ample airflow within the case. The front panel has air inlets on the right hand side to further improve overall airflow. The case supports ATX, Micro-ATX- and Mini-ITX form factor motherboards. Graphics cards up to 335mm can be installed, alongside 160mm CPU Coolers, ATX Power supplies and there is also space for a 240mm radiator on the front panel. Room for Storage The KLA-003 can support a decent amount of hard drives, including either 2 x 3.5″ HDD's, or up to 4 x 2.5″ SDD's as standard. There's up to 21mm of cable management space available behind the motherboard tray for more effective routing of power supply cables and there's also space for a 5.25″ device such as an optical drive. Functionality aside, the KLA-003 offers a no nonsense yet professional look with solid steel side panels and a subtle front panel design. The I/O panel is located on the top panel & sports a USB3.0 port, alongside a pair of USB2.0 ports. Two 3.5″ jacks for headphones and microphones are available, along with the power button. Specification: Dimensions: 175 x 410 x 365mm (W x H x D) Weight: approx. 4.1kg Material: Steel, plastic Colour: Black Form factor: ATX, Micro-ATX, Mini-ITX Total possible fans: 2x 120mm (front) 1x 120mm (side) 1x 80 mm (rear) Pre-installed: 1x 80 mm (rear) Drive bays: 2x 3.5″ HDD or 4x 2.5″ SSD PSU: 1x Standard ATX (optional) Expansion slots: 6 I/O Panel: 1x USB 3.0 2x USB 2.0 1x Audio In/Out Max GPU length: approx. 335mm Max CPU Cooler height: approx. 160mm

Good to know- Keep your PC firing on all cyclinders with the pre-installed 120 mm fan, air inlets and dust filters- You can build a real work of art - as well as RGB lighting, the V-shaped front panel has an infinity mirror- It's spacious enough for a powerhouse - it'll fit ATX motherboards and 310 mm long GPUs- You can admire your powerful components through the tempered glass panel- Speed and storage are well catered for - there's room for 4 hard drives and options to mix SSDs and HDDs- You're sorted for peripherals with 4 USB ports and 2 headset jacks

Good to know- Keep your PC firing on all cyclinders with the pre-installed 120 mm fan, air inlets and dust filters- You can build a real work of art - as well as RGB lighting, the double triangle front panel has infinity mirrors- It's spacious enough for a powerhouse - it'll fit E-ATX motherboards and 365 mm GPUs- You can admire your powerful components through the tempered glass panel- Speed and storage are well catered for - there's room for 4 hard drives and options to mix SSDs and HDDs- You're sorted for peripherals with 4 USB ports and 2 headset jacks

Enhance your cooling setup's aesthetics with the Kolink Umbra Void ARGB PWM fan.

Add style to your cooling with the Kolink Umbra Void ARGB PWM fanThe Features of Kolink Umbra Void 120mm PWM at a Glance:120mm white 9-bladed ARGB PWM fan with a curved design12 LEDs each on the inside and outside of the fan for rich coloursARGB 3-pin 5V compatible with Asus Aura Sync for full lighting controlAdjustable speed controls via a Daisy Chain PWM connectorInfinity Mirror Effect for an endless reflective lighting displayHydraulic bearing to further maintain reliable performanceAnti-vibration pads to ensure quiet operationStylish Lighting & CoolingArmed with 12 LEDs both on inside and outside of the fan, the Kolink Umbra Void delivers jaw-dropping lighting displays along with impressive cooling performance. Courtesy of the 3-pin 5V header, this 120mm fan is compatible with software like Asus Aura Sync to provide optimal control over your ARGB displays. The cherry on top, however, is the Kolink Umbra Void fan’s Infinity Mirror effect. Gaze into the void as this sensational feature turns your gaming PC into an endless reflective tunnel of vivid colours.Curved to further increase performance, the Kolink Umbra Void 120mm fan is capable of speeds of up to 1500 RPM, along with an airflow of 41CFM. What’s more, you’ll be able daisy-chain multiple units via this ARGB fan’s male and female PWM connectors. The daisy chain PWM connectors can also link up with adjustable speed controls. So, depending on the task at hand, you can adjust your fan speed to how you like.Built to LastIn conjunction with its fantastic features, the Kolink Umbra Void has been designed and manufactured with premium components to make this fan last. An implemented hydraulic bearing not only bolsters fan life to 40,000 MTBF, but the reduced internal friction boosts overall performance as well. Furthermore, the Kolink Umbra Void’s anti-vibration pads ensure that even when you’ve adjusted the fan to top speed, you’ll enjoy a smooth and quiet operation; a sound level of just 19.6dB (A).Kolink Umbra Void 120mm Specifications:Product120mm White 9-Bladed ARGB PWM Fan with Infinity Mirror EffectDimensions120mm x 120mm x 25mmSpeed500 - 1500±10% RPMAirflow41CFMStatic Pressure1.42mm H20Connection CablePWM Female & Male3-Pin 5V Female & MaleSound Level19.6dB (A)BearingHydraulicMTBF40,000 Hour

The Kolink 1-3 PWM Fan Splitter Cable is a 1-to-3 PWM fan splitter, which allows the user to connect up to three PWM fans from just one PWM fan header on the motherboard. Because the fans are PWM controlled the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings, meaning the RPM and therefore noise will be reduced if the system does not demand high airflow.

The Kolink 1-4 PWM Fan Splitter Cable is a 1-to-4 PWM fan splitter, which allows the user to connect up to four PWM fans from just one PWM fan header on the motherboard. Because the fans are PWM controlled the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings, meaning the RPM and therefore noise will be reduced if the system does not demand high airflow. The extra power required to run four fans from this splitter is provided by the SATA male connector, which does need to be connected if more than one fan is used.

Prepared for the next heat wave: The strong Aero USB Desk Fan by Kolink provides cooling exactly where it is most needed. The fight to keep cool is no longer a losing battle when you have the Kolink Aero placed anywhere on your desk. Turn the ventilation grille so that the air flow is directed exactly where it should and you will be kept nice and cool at all times. Optimal cooling thanks to powerful motor The powerful and quiet brushless DC motor ensures a powerful airflow. In addition, the rotational speed can be set in three steps of 2,400, 2,800 and 3,200 rpm . About a 1.2 meter long USB cable with type A plug , the required 0.8 A and a maximum of 4 watts are supplied. This allows the fan made of high-quality ABS and polypropylene can also be connected to a conventional smartphone power supply. The Aero USB Desk Fan from Kolink is not only suitable for home use, but also for use at LAN parties or eSports events, because well-cooled is half the battle.

With the addition of a Kolink Core Adept ARGB Connector Link Kit, you can level up the cable management of your gaming PC. This kit includes six hook and loop fasteners, for securing ARGB headers together, and a self-adhesive Velcro strip, to hold them in place. The subtle Kolink branding is an elegant touch on this game changing cable management kit. With the Kolink Core Adept ARGB Connector Link Kit, you can solve the common issue of ARGB cables disconnecting. This kit includes six hook and loop fasteners, which firmly hold the two connectors together. There are two holes to feed each connector through, and the main body of the fabric folds around them and clings to itself. Voilà, two ARGB connectors held firmly together. What’s more, the Kolink Core Adept ARGB Connector Link Kit includes a self-adhesive Velcro strip. This is designed to stick on the back of your motherboard tray, right where the two headers connect. From there, you can press the fastener into place and the cables will not droop either. The finishing touch on this game-changing cable management is the subtle Kolink branding, visible with fastened correctly.

The Kolink internal USB Hub is the ideal solution for increasing the amount of internal USB ports available in your system. Whilst most USB hubs are externally mounted, this board offers the possibility to duplicate the internal connections. Thus, for example, the I / O panel can be supplied via a connection. The small circuit board is connected to an internal USB port via the supplied cable and provides four internal USB ports.A separate 4-pole Molex supplies the compact USB hub and the individual channels with power. Mounting is via the supplied 3M adhesive strip, allowing mounting to both magnetic & non magnetic surfaces.Technical details:Dimensions: 95 x 12 x 29 mm (W x H x D)Material: PlasticInputs: 1x USB 2.0 internal 1x 4-pin MolexOutputs: 4x USB 2.0 internal Mounting: 3M Adhesive strip

Standard 'kettlle plug' cable for ATX power supplies and monitors - fitted with a moulded and fused plug and with 1.2 meters of cord. While this item is somewhat less exciting than your graphics card and processor you will be going nowhere fast without it.

The Kolink Internal USB Hub is an essential tool for expanding your system's internal USB connections. This convenient hub allows you to connect multiple devices to your motherboard, making it easy to keep your system organized and running smoothly. The 60cm USB cable provides plenty of length for flexible installation, while the durable construction ensures reliable performance. With its compact size and reliable functionality, this internal USB hub is the perfect solution for expanding your system's connectivity. Upgrade your system with the Kolink Internal USB Hub today and experience the convenience of a well-connected setup.

Featuring a female connector that can be easily attached to a standard 4-Pin motherboard header. Additionally, 3 male connectors then enable you to power compatible PWM fans. At 35cm in length, this splitter enables you to set up your air cooling system the way they want.

Expand your ARGB lighting display with the Kolink ARGB 1 – 6 Splitter Cable. This 300mm long cable features one ARGB header for plugging into your motherboard, and six headers for connecting multiple ARGB devices. The single junction connector block makes cable management easy, with its classic black aesthetic seamlessly blending into your gaming PC. The 3-pin 5V headers feature removable connectors, as well as both male and female options. Light up your gaming PC with ease and no cable clutter! Take your lighting to the next level, with the Kolink ARGB 1 – 6 Splitter Cable. This simple cable allows you to connect up to six ARGB devices to one header on your motherboard. At 300mm long, you can seamlessly integrate this cable into your gaming PC without adding clutter. Plus, the single junction connector block facilitates easy cable management. The six headers utilise 3-pin 5V, removable connectors, available in both male and female options. Please note : This cable does not support PWM fan speeds.

Premium power cord from Kolink with 1.0 mm 2 conductor cross-section and 1.8 m length to connect any device with a compatible connector on the normal power grid. For this, the cable has a safety plug for the power socket and at the other end via the IEC C13 plug, which is also known as the IEC plug and is required for example for most PC power supplies. The maximum current is 10 amperes.

Add some razzle dazzle to your gaming PC with the Kolink Umbra Radiant ARGB LED Strip. This 1m long strip contains 80 vibrant LEDs that can are addressable, enabling you to illuminate your PC with your own unique rainbow. Included within this kit are twelve mounting brackets and 3M adhesive tabs, so you can expertly route this lighting through your PC case with ease. Kolink Radiant Umbra ARGB LED Strip at a Glance: 1m long ARGB LED strip for your gaming PC Twelve mounting brackets included for ease of installation Features 80 vibrant ARGB LEDs in black casing 5V 3-pin header for extensive compatibility Includes twelve 3M adhesive strips in scope of delivery Flexible and smooth bends Vibrant Lighting The Kolink Umbra Radiant ARGB LED Strip will add a vibrant splash of colour to your gaming PC. This ARGB strip is 1m long and contains 80 LEDs encased in a black housing. What’s more, these are addressable LEDs, meaning you can adjust the colour and effects to best suit your aesthetic. For extensive compatibility, the Kolink Umbra Radiant ARGB LED Strip connects via 5V 3-pin header in your motherboard or ARGB controller. There is 300mm of cable at either end of the strip, allowing for plenty of flexibility for installation. Kit Contents In addition to the ARGB strip, the Kolink Umbra Radiant comes with twelve mounting brackets to optimise routing. There are four 90° and four 180° brackets, as well as another four 180° flat mounts. You can utilise any combination of these brackets to craft a beautiful light show within your gaming PC. What’s more, the strip itself is very flexible, making it malleable and easy to configure. Lastly, the kit also contains twelve 3M double-sided adhesive tabs, so you can secure the ARGB strip in place with confidence and ease.

Power your GPU in style with the Kolink Umbra Radiant 12V-2x6 to 12V-2x6 Cable. Crafted with 16AWG wiring and premium materials, this cable delivers 600W power transmissions securely whilst the 128 ARGB LEDs illuminate your gaming PC. Kolink Umbra Radiant ARGB 12V-2x6 to 12V-2x6 Cable at a Glance: 12V-2x6 to 12V-2x6 GPU power cable White cabling with silicone shell and PET braided sections 90° angled connector to prevent sharp bending 128 ARGB LEDs 700mm long 16AWG wiring for stable power delivery Powerful Style The Kolink Umbra Radiant 12V-2x6 to 12V2x6 Cable directly connects your GPU to your PSU, without the need for extension cables. At 700mm long, it effortlessly bridges the gap between these two components, delivering stable power across the 16AWG silver-plated wiring. Designed with two sections, the GPU connector is angled at 90%deg;, to prevent any sharp bends from damaging the wire. This section features 128 ARGB LEDs surrounded by a high-quality, UV-protected silicone shell, facilitating vibrant lighting and smooth bends. The PSU section features PET braiding for enhanced durability and a sleek finish.

The Kolink ARGB 1-2 Splitter Cable allows users to extend one D-RGB source to two widely spread spaced accessories so that they can build an aesthetically beautiful lighting system. It features standard 3-pin addressable RGB headers and two male-male connector pins are also included in the packaging. The extender cable can be used with any standard 3-pin 5V RGB controller or any popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header.

For those who want a compact system with substantial airflow & ARGB lighting, look no further than the Kolink Citadel Mesh RGB Micro-ATX Case. Featuring a full mesh front panel with a pair 120mm ARGB LED PWM fans, the Kolink Citadel Mesh has a range of lighting effects & modes, controlled using the supplied remote or via compatible motherboard software. With a hinged tempered glass side panel, your components & lighting will be on full display, allowing some truly stunning results. The Features of the Kolink Citadel Mesh RGB at a Glance Full mesh front panel with 2 x pre-installed ARGB LED PWM Fans Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible) - riser cable sold separately Support for radiators up to 280mm in the front and 240mm at the top I/O Panel with 2x USB 3.0 & 1x USB 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm Kolink Citadel Mesh RGB: Excellent Airflow with attractive lighting The Kolink Citadel Mesh RGB comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects and can even be automatically speed controlled through connecting them to your motherboard's PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, and is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. The Kolink Citadel Mesh RGB: Hardware capable The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDD's in the HDD cage provided. Alternatively, 2.5" SSD's can be installed here, or next to the motherboard. The motherboard tray and PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable...