84 products were found matching your search for soldering in 5 shops:

Sievert 2955 Soldering Burner for use on lead, copper sheet, tin etc. Facilitates easier joining than using a naked flame.

Gas Soldering Iron, 10 in 1 Soldering Kit 26ml Butane Gas Soldering Iron Set Professional Pen Style Torch HS-1115K

The bench power supply S-LS-76 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 50 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

60w Soldering Iron - soldering 60w iron amtech

The bench power supply S-LS-87 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 to 60 V and the output current from 0 to 5 A. During adjustment you can check the respective values on the large LED display. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

2 In 1 12ml Pen Shape Gas Soldering Iron Tool Soldering Guns with Soldering Iron Head Tip Cordless Pen Burner

The Stamos Soldering Electronic Load provides reliable measurement results in both simple and complex applications. Use it in quality assurance as well as in product development or product safety. As a PC interface, the unit has connections for USB, RS232, GPIB and LAN. The Electronic Load provides a high-precision DC power supply with precise resolution, where you have access to the four working modes CV / CC / CR / CP. You control the unit via a clearly laid out control panel, which is equipped with a rotary control for precise adjustment of both voltage and current. The graphic LCD display also shows this as a waveform. You save the waveform data via a U-Disk connection. In addition, you have up to 100 memory locations at your disposal. The clearly legible LCD display shows the values for current and voltage with an accuracy of 0.1 mA and 0.1 mV respectively. The voltage can be set within a range of 0 - 150 V, and the current can be regulated between 0 - 40 A. Thanks to 100 programmable memory locations, operation is extremely convenient. For precise control, set the load according to a constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP). It is used for automatic tests, for testing batteries or solar panels as well as for OPP and OCP tests. In addition, the unit offers functions for short-circuit analysis, current monitoring, switch-off memory and remote interrogation. . The DC electrical load is protected against excessive power, temperature, voltage and current. So you always use it safely in daily operation and fully exploit the power of 1500 W even in dynamic mode up to 10 kHz.

Cordless Soldering Iron Kit,Soldering Iron with Storage Box and 3Pcs Soldering Iron Tip,for Electronic Components

The adjustable bench power supply S-LS-86 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED displays, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 - 100 V and the output current from 0 - 3 A. During adjustment you can check the respective values on the large LED display. If the adjustable power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the laboratory power supply you get an apparatus with a high safety standard: The unit has been equipped with an overload protection (OPP) as well as an overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

ANTEX - 2.3mm Soldering Iron Tip for XS Series Soldering Iron

The bench power supply S-LS-74 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The dials allow you to precisely adjust the values and thereby guarantee exact setting of the desired current from 0 to 30 V DC and 0 to 5 A for channels I and II, and 0 to 5 V and 0 to 3 A for channel III. During adjustment, you can observe the values in question on the four LED displays and easily modify them to meet your needs. Each of the three channels can be adjusted separately and each supplies one of the three current outputs with the set current values. You can easily choose between two different modes with this dual lab power supply: Parallel or series mode. In series mode you can work with twice the voltage of 60 V, while parallel mode allows you to operate with only one channel at double the current of 10 A. The power supply unit's output can thus be adapted to your individual requirements. This benchtop power supply unit meets the highest standards of safety: The device is equipped with special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.

Draper 12V SOLDERING IRON (BARE) 03861 12V Soldering Iron

The Stamos Soldering Electronic Load provides reliable measurement results in both simple and complex applications. Use it in quality assurance as well as in product development or product safety. As a PC interface, the unit has connections for USB, RS232, GPIB and LAN. The Electronic Load provides a high-precision DC power supply with precise resolution, where you have access to the four working modes CV / CC / CR / CP. You control the unit via a clearly laid out control panel, which is equipped with a rotary control for precise adjustment of both voltage and current. The graphic LCD display also shows this as a waveform. You can save the waveform data via a U-Disk connection. In addition, you have up to 100 memory locations at your disposal. The clearly legible LCD display shows the values for current and voltage with an accuracy of 0.1 mA and 0.1 mV respectively. The voltage can be set within a range of 0 - 150 V, and the current can be regulated between 0 - 40 A. Thanks to 100 programmable memory locations, operation is extremely convenient. For precise control, set the load according to a constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP). It is used for automatic tests, for testing batteries or solar panels as well as for OPP and OCP tests. In addition, the unit offers functions for short-circuit analysis, current monitoring, switch-off memory and remote interrogation. . The DC electrical load is protected against excessive power, temperature, voltage and current. So you always use it safely in daily operation and fully exploit the power of 500 W even in dynamic mode up to 10 kHz.

ANTEX - 0.12mm Soldering Iron Tip for XS Series Soldering Iron

The Soldering Station S-LS-12 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has a large LED display for precise indication of the irons’ temperature. Thanks to the integrated voltmeter you can instantly check your soldered areas. Moreover the Soldering Station S-LS-12 is equipped with a side rack with dry sponge for holding the soldering iron. The integrated heating element guarantees efficient heat transfer. In addition to the base and the soldering irons you also receive following accessories: a magnifying lamp for soldering work, 9 soldering tips and a pair of soldering tweezers for handling hot parts.

ANTEX - 2.3mm Soldering Iron Tip for M, C & TC25 Series Soldering Irons

The Soldering Station S-LS-6 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has a large LED display for precise indication of both irons’ temperatures (soldering and hot air). Moreover the Soldering Station S-LS-6 is equipped with a side rack for holding the hot air gun as well as a rack for the soldering iron with a dry sponge. The 650 watt hot air gun is suited for soldering as well as desoldering surface mounted devices (SMD) with the hot air technique. The integrated heating element guarantees efficient heat transfer. In addition to the base and the soldering irons you also receive following accessories: a magnifying lamp for soldering work, 9 soldering tips, 5 hot air nozzles, a pair of soldering tweezers for handling hot parts, desoldering braid to remove solder joints as well as an IC popper. The tin roller is mounted only for demonstration purposes and not included in the delivery package.

ANTEX - 0.12mm Soldering Iron Tip for M, C & TC25 Series Soldering Irons

The Soldering Station S-LS-10 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has a large LED display for precise indication of both irons’ temperatures (soldering and hot air). Moreover the Soldering Station S-LS-10 is equipped with a side rack for holding the hot air gun as well as a rack for the soldering iron with a dry sponge. The 650 watt hot air gun is suited for soldering as well as desoldering surface mounted devices (SMD) with the hot air technique. The integrated heating element guarantees efficient heat transfer. In addition to the base and the soldering irons you also receive following accessories: a magnifying lamp for soldering work, 9 soldering tips, 4 hot air nozzles, desoldering braid to remove solder joints as well as an IC popper.

Dekton Solder Soldering Remover 2.5mm x 1.5metre Desoldering Braid Wick