1643 products were found matching your search for toolport in 9 shops:

5x10m Marquee / Party tent, PE 350, white: If you need a party tent for the temporary use, you are well advised with the 5x10m large toolport party tent of quality FLEX. The party tent in the color white is suitable for countless missions: from the party location for a birthday, an anniversary or a garden party, to space expansion or storage space. The total area of ​​this FLEX party tent is approx. 50m². If this is to be enlarged for larger events in the future, this is not a problem. Thanks to the modular construction of the ToolPort party tent, this can be expanded at any time with the corresponding, additional accessories. Use as a party location is particularly popular. The FLEX party tent can be set up quickly and flexibly thanks to the high -quality click system. The linkage from Steel is fully dizzy from the inside and outside and therefore optimally corrosion -protected, robust and insensitive to bumps, as well as scratches. A great advantage over powder -coated steel pipes. The fully galvanized Steelalso offers hardly any attack area for rust. Durable and tear-resistant PE is used as a tarpaulin material. In particular, the tarpaulin from PE has a tearing force of 350 or 180 g/m² Pro 5cm Planning width. Thanks to welded seams, the tarpaulin from PE is 100 % waterproof, so that no party must literally fall into the water when it rains. With a UV protection of 30+, this FLEX party tent also offers high protection in summer. The continuous roof tarpaulin from one piece also holds the entire construction together. An all -round volant hides gap and stops drafts. Due to its low weight, the standard PE tarpaulin can also be installed particularly easily, which also proves to be very practical when transporting and storing. The tarpaulin white is 100 % recycled. The side parts can be installed quickly via rubber running on the linkage and are equipped with large windows in round arch optics - perfect so that a lot of daylight can get into the tentine. The side height is approx. 2.0 m. Speaking of structure: thanks to the high-quality click system and the light PE tarpaulin, the tool port party tent can be quickly assembled and dismantled- completely without additional tools or specialist knowledge. The FLEX party tent is therefore perfect when time is an important factor. Compared to a rented location, a party tent offers a lot of flexibility, is cheaper and can also be reused for further events in the future. Thanks to the party tent, even a party in the own garden is possible - and that, with any weather.

Voltage monitor integrated in the supply cable for thermoelectric 12 V cooling units. For automatic switch-off at undervoltage and switch-on again at normal voltage. * Switch-off voltage 11.2 volts * Switch-on voltage 12.5 volts * Switching current maximum 5 amps

6x12m Marquee / Party tent, PE 450, grey-white: If you are looking for a stable party tent for temporary use, you will find what you are looking for with the 6x12m large tool port of the quality FLEX. The party tent in the color grey-white is suitable for countless missions: from the party location for a birthday, an anniversary or a garden party, to space expansion or storage space. The total area of ​​this FLEX party tent is approx. 72m² and the side height is approx. 2.0 cm. If this is to be enlarged for larger events in the future, this is not a problem. Thanks to the modular construction of the ToolPort party tent, this can be expanded at any time with the corresponding, additional accessories. Use as a party location is particularly popular. The FLEX party tent combines robustness and lightness. The stable and stable linkage from [Gestaenge_Masser] is responsible for robustness. From the inside and outside, this is fully dizzy and therefore optimally corrosion -protected, robust and insensitive to bumps, as well as scratches. A great advantage over powder -coated steel pipes. The fully galvanized Steelalso offers hardly any attack area for rust. All construction elements of this party tent are connected by a screwed screw, which significantly reinforces the entire construction. Steel thickness and steel frame diameter are specially tailored to the requirements of this tent. The tarpaulin material ensures the lightness. Durable and tear-resistant PE is used as a tarpaulin material. In particular, the tarpaulin from PE has a tearing force of 450 or 240 g/m² Pro 5cm Planning width. Thanks to welded seams, the tarpaulin from PE is 100 % waterproof, so that no party must literally fall into the water when it rains. With a UV protection of 30+, this FLEX party tent also offers high protection in summer. The continuous roof tarpaulin from one piece also holds the entire construction together. An all -round volant hides gap and stops drafts. Due to its low weight, the standard PE tarpaulin can also be installed particularly easily, which also proves to be very practical when transporting and storing. The tarpaulin grey-white is 100 % recycled. The side parts can be installed quickly via rubber running on the linkage and are equipped with large windows in round arch optics - perfect so that a lot of daylight can get into the tentine. Another advantage of the side parts of this tool port party tent: they are individually removable. This means that tent entrances can be designed individually. The FLEX party tent can be easily assembled and dismantled- and that, completely without additional tools or specialist knowledge. The scope of delivery is included in a detailed step-by-step assembly instructions. Compared to a rented location, a party tent offers a lot of flexibility in the design and with regard to the various use scenarios, is cheaper and can also be reused for further events in the future. Thanks to the party tent, even a party in the own...

Adak is a true winter adventure boot, with timeless Scandinavian design.High shaft in.felted wool and Oily Nubuck leather.The BUGdri® membrane keeps the feet dry and the.Primaloft® Bio insulation keeps them warm.The Terry fleece lining adds further warmth.and in combination with the wide last the comfort level is very high.Full lacing enables fine tuning the fit as preferences may vary depending on the activity.The shaft and the supportive midsole results in a stable boot suitable for long walks in.all kinds of winter weather, add to that a studded BUGrip® outsole and it´s no wonder why Adak is the number one winter boot choice.

4x8m polytunnel greenhouse, PE, white: We offer - depending on customer wishes and needs - a variety of greenhouse foils including robust steel frames, base frames and a continuous approx. 180 g/m² heavy PE tarpaulin. Choose the tarpaulin colour either green or white as well as your personally preferred greenhouse size from various dimensions: 2x3 m, 3x4 m, 3x6 m, 3x8 m, 4x6 m, 4x8 m or 4x10 m. The side height is approx. 1 m, while the ridge height and thus also the standing height in the middle is approx. 2 m. The greenhouse is perfect for you if you are looking for reliable and quickly effective wind and rain protection for your plants. The transparent windows also provide plenty of light and good plant growth. You also don't need a foundation, as your vegetable plants can grow directly into the ground. The short assembly times as well as quick and easy assembly of the product are additional advantages.

Adak is a true winter adventure boot, with timeless Scandinavian design.High shaft in.felted wool and Oily Nubuck leather.The BUGdri® membrane keeps the feet dry and the.Primaloft® Bio insulation keeps them warm.The Terry fleece lining adds further warmth.and in combination with the wide last the comfort level is very high.Full lacing enables fine tuning the fit as preferences may vary depending on the activity.The shaft and the supportive midsole results in a stable boot suitable for long walks in.all kinds of winter weather, add to that a studded BUGrip® outsole and it´s no wonder why Adak is the number one winter boot choice.

4x10m polytunnel greenhouse, PE, white: We offer - depending on customer wishes and needs - a variety of greenhouse foils including robust steel frames, base frames and a continuous approx. 180 g/m² heavy PE tarpaulin. Choose the tarpaulin colour either green or white as well as your personally preferred greenhouse size from various dimensions: 2x3 m, 3x4 m, 3x6 m, 3x8 m, 4x6 m, 4x8 m or 4x10 m. The side height is approx. 1 m, while the ridge height and thus also the standing height in the middle is approx. 2 m. The greenhouse is perfect for you if you are looking for reliable and quickly effective wind and rain protection for your plants. The transparent windows also provide plenty of light and good plant growth. You also don't need a foundation, as your vegetable plants can grow directly into the ground. The short assembly times as well as quick and easy assembly of the product are additional advantages.

10,000 Knitted Hats. Hardback. By Jo Allport

2x3m polytunnel greenhouse, PE, white: We offer - depending on customer wishes and needs - a variety of greenhouse foils including robust steel frames, base frames and a continuous approx. 180 g/m² heavy PE tarpaulin. Choose the tarpaulin colour either green or white as well as your personally preferred greenhouse size from various dimensions: 2x3 m, 3x4 m, 3x6 m, 3x8 m, 4x6 m, 4x8 m or 4x10 m. The side height is approx. 1 m, while the ridge height and thus also the standing height in the middle is approx. 2 m. The greenhouse is perfect for you if you are looking for reliable and quickly effective wind and rain protection for your plants. The transparent windows also provide plenty of light and good plant growth. You also don't need a foundation, as your vegetable plants can grow directly into the ground. The short assembly times as well as quick and easy assembly of the product are additional advantages.

Portrait of a Body. Paperback. By Julie Delporte

3x6 PES 700 Pop up gazebo ECONOMY Aluminium 32 mm, incl. Sidewalls with Panorama Windows, white: The 3x6m large toolport folding pavilion is the ideal model for fast and spontaneous use. Whether as a sales or promotional tent on events, as an immediate weather protection in the garden or as an output tent- this 18m² large folding pavilion is a real all-rounder! This tool port folding pavilion is quickly stowed and transported, especially thanks to the light die from Aluminium. The linkage from Aluminiumnot only has a slight weight, but is also resistant to corrosion and weather, as well as sensitive to shock and scratch. The stand legs have a robust square profile with a diameter of approx. 33 mm and a wall thickness of approx. 1 mm. For high stability, the Aluminium was treated especially with the ELOXAL process. Another advantage of the dock: it is up to 5 times a height adjustable. High quality High-performance Polyester is used for the tarpaulin, which clads a tearing force of 700 or 300 g/m² Pro 5cm tarpaulin width. The tarpaulin from High-performance Polyester is coated with PVC and thereby tear -resistant, hard -wearing and easy to use. The side parts of this folding pavilion are in the color white and create individual inputs. You decide where and whether you want to create tent entrances, because: the side parts are all individually removable. You can hang out the side parts at any time and to a later time via the hook, clip on the linkage - done! A side part without a window serves as an effective point of view and eye protection, while one with windows ensures a lot of daylight in the pavilion. In addition to the linkage, the structure of this toolport folding pavilion is also light and handy. Neither individual components have to be installed, nor is additional tools required. This is due to the practical scissor mechanism, which also ensures a structure in record time. The scope of delivery also includes soil fortifications that ensure additional stability and stability - plus: a transport bag. This bag is made of high-quality oxford material and ensures quick transport-ideal for portable use!

Lightweight non-safety occupational lace up work boot with internal waterproof membrane and flexible energy-absorbing PU Rubber outsole. Tested and certified to EN ISO 20347:2012 Occupational standard.

3x6m Marquee / Party tent w. ground frame, PVC 800, dark green: Highly stable and stable throughout the year - these properties are characterized by the 3x6m large toolport party tent of quality PRO. Maximum stability, stability and weather strength are the premise of this party tent. Equipped with an all-round running floor frame, corner stiffeners and 2-3 times roof reinforcements, this party tent in dark green is designed for long and frequent service life. Thanks to the additional reinforcing elements in the roof and floor area, weather-related forces can be optimally derived and the overall stability can be increased as much as possible. The total area of ​​the PRO party tent is approx. 18m². The linkage is fully dizzy from the inside and outside and therefore optimally corrosion -protected, robust and insensitive to bumps, as well as scratches. A great advantage over powder -coated steel pipes. The fully galvanized Steelalso offers hardly any attack area for rust. All construction elements of this party tent are connected by a screwed screw, which significantly reinforces the entire construction. Steel thickness and steel frame diameter are specially tailored to the requirements of this tent. In addition, the party tent has an all -round running ground frame. The floor frame effectively secures and fixes the stand legs on the floor and thereby increases the stability of the party tent many times over. Another advantage of the floor frame: it reduces unwanted planning movements. An important point, especially when wind has been announced. The roof reinforcements prevent water sack formation on the roof tarpaulin. In particular, these are additional reinforcing components in the roof, which increase the load and the overall stability of the roof. The roof reinforcements are precisely made for this size of the tent. Not to forget: the corner stiffeners. Corner stiffeners are diagonal struts in the tent corners and serve to reinforce the side frame. Especially in winds, these ensure optimal stability. Very tear-resistant and durable PVC is used as a tarpaulin material. Thanks to the strong raster tissue, the tarpaulin from PVC has a raging force of 800 or 550 g/m² Pro 5cm plane width. From the haptics, PVC resembles that of a truck tarpaulin. The glossy smooth look not only looks nice, it is also particularly easy to care for and can be easily cleaned. Thanks to welded seams, the tarpaulin from PVC is also 100 % waterproof, so that no party must literally fall into the water when it rains. Speaking of weather strength: the XXL floor apron offers additional protection against wind and rain. Thanks to the floor apron, rainwater can run far enough from the tent. It also gives soil moisture no chance of penetrating into the tent. With a UV protection of 50+, the PRO party tent also offers high protection in summer. So it is a tarpaulin that offers reliable protection in every season and weather. The continuous roof tarpaulin from one piece also...

Lightweight non-safety occupational lace up work boot with internal waterproof membrane and flexible energy-absorbing PU Rubber outsole. Tested and certified to EN ISO 20347:2012 Occupational standard.

Garden Gazebo Hardtop Forest Deluxe 3x4m, loft grey: This 3x4m large tool port garden pavilion of the product line Forest is something very special: it nestles into its garden idyll and becomes one with nature. Its design and optics are simply unmistakable. You will think that this garden pavilion, which probably consisted of the most natural raw material: wood. In fact, the construction of this garden pavilion looks completely natural and authentic. Wood gives them an absolute feeling of nature, but the material is in need of care and is not weatherproof in the long run. So that you do not regularly stroke, grind and paint, but still have to benefit from the ultimate feeling of nature, this tool port garden pavilion has a deceptive real wood look. This means that you benefit from the quality of metal and the look of wood. The posts of this Forest garden pavilion consist of powder -coated Aluminiumand are therefore extremely stable. The construction is also corrosion-protected, as well as UV and weather-resistant. Thanks to the wood optics cladding, the posts also look completely natural. In combination with the deceptively real wood look of the Aluminiumposts, the roof becomes an absolute eye-catcher. This is 100 % waterproof and creates a relaxed, weatherproof well -being in your garden or on the terrace. The roof in particular consists of approx. 8 mm strong Polycarbonatee sheets. In addition, there are the luxurious side parts in the color loft grey. These can be attached to the curtain rod or curtain splint in no time at all and can be completely locked with a zipper. Decide individually whether you want this garden pavilion with a floor area of ​​approx. 12m² open, half -open or closed. If you close the side parts, they offer rain and wind protection. Speaking of rain: the garden pavilion seven parts are made of high quality, approx. 8 mm heavy Polycarbonatee sheets and 100 % waterproof. They not only skillfully stage the garden pavilion and have an inviting effect, but also: they also stole a certain cosiness. This creates a natural and complete harmony between construction and nature. A garden pavilion that becomes one with its wood look with nature and its garden idyll without demanding a high care, control or maintenance requirement. Spend your time in nature!

Lightweight non-safety occupational lace up work boot with internal waterproof membrane and flexible energy-absorbing PU Rubber outsole. Tested and certified to EN ISO 20347:2012 Occupational standard.

4x6m - 3.0m Sides Industrial Tent with zipper entrance, PRIMEtex 2300 fire resistant, grey with statics package (concrete anchors): This 4x6m large tool port tent hall of quality Outlander offers solid basic equipment and can be used all year round. The construction is certainly progressing and effectively defies wind and weather. High -quality materials as well as fully pivoted frames and a high -quality tarpaulin ensure that goods, machines and vehicles are weather -protected in both summer and winter. Whether as a (external) storage area, garage or as a workshop, this tent hall offers plenty of space and represents an inexpensive, flexible alternative to solid buildings. For professional use, the Outlander tent hall is a real multifunctional talent for agriculture, industry and Business. The total area of ​​this 4x6m large tent hall in the color grey is approx. 24m². The construction is decisive for the stability and stability of the tent. The linkage of the Outlander tent hall consists of robust Steel. This is fully dizzy from the inside and outside and thus effectively protects against corrosion and rust. The fully galvanized pipes from Steelare less sensitive to shocks and scratches- such as powder-coated steel tubes. All design elements of this tent hall are connected by a fell -plugged -in ward, which significantly reinforces the entire construction. The steel thickness and the steel tube diameter are particularly tailored to the high requirements, extend the period of time of this tent and make it so robust and resistant. Additional components in the roof and in the side surfaces are installed to further reinforce the total stability. In addition, the tent hall has an all -round running ground frame. The floor frame effectively secures and fixes the stand legs on the floor and thereby increases the stability by many times. Another advantage of the floor frame: it reduces unwanted planning movements. An important point, especially when wind has been announced. Also designed for all -year use: the tarpaulin. It is a high -quality tarpaulin from PVC. This has a dense grid fabric and is characterized by a high durability and tear resistance. In particular, the hard -wearing tarpaulin has a tear of 2300 or 720 g/m² Pro 5cm tarpaulin width. From the feel, the material is similar to that of a truck tarpaulin. The glossy smooth look is particularly easy to care for and can be easily cleaned. The high sun protection factor of 50+ protects the warehouse ideal from UV radiation. The tarpaulin is weatherproof all year round. Speaking of weather: an extra long XXL floor apron lets rainwater run away from the tent and gives soil moisture no chance of getting into the tentine. In addition, the soil apron protects against wind because it effectively reduces planning movements. It lies around approx. 30 cm on the floor and is conveniently attached to the tent from the inside and outside. Also an important point in the topic of tarpaulin: The Outlander...

Lightweight non-safety occupational lace up work boot with internal waterproof membrane and flexible energy-absorbing PU Rubber outsole. Tested and certified to EN ISO 20347:2012 Occupational standard.

3x6m - 3.0m Sides PVC Industrial Tent with pull-up gate, PVC 850, grey with statics package (soft ground anchors): This 3x6m large tool port tent hall of quality Outlander offers solid basic equipment and can be used all year round. The construction is certainly progressing and effectively defies wind and weather. High -quality materials as well as fully pivoted frames and a high -quality tarpaulin ensure that goods, machines and vehicles are weather -protected in both summer and winter. Whether as a (external) storage area, garage or as a workshop, this tent hall offers plenty of space and represents an inexpensive, flexible alternative to solid buildings. For professional use, the Outlander tent hall is a real multifunctional talent for agriculture, industry and Business. The total area of ​​this 3x6m large tent hall in the color grey is approx. 18m². The construction is decisive for the stability and stability of the tent. The linkage of the Outlander tent hall consists of robust Steel. This is fully dizzy from the inside and outside and thus effectively protects against corrosion and rust. The fully galvanized pipes from Steelare less sensitive to shocks and scratches- such as powder-coated steel tubes. All design elements of this tent hall are connected by a fell -plugged -in ward, which significantly reinforces the entire construction. The steel thickness and the steel tube diameter are particularly tailored to the high requirements, extend the period of time of this tent and make it so robust and resistant. Additional components in the roof and in the side surfaces are installed to further reinforce the total stability. In addition, the tent hall has an all -round running ground frame. The floor frame effectively secures and fixes the stand legs on the floor and thereby increases the stability by many times. Another advantage of the floor frame: it reduces unwanted planning movements. An important point, especially when wind has been announced. Also designed for all -year use: the tarpaulin. It is a high -quality tarpaulin from PVC. This has a dense grid fabric and is characterized by a high durability and tear resistance. In particular, the hard -wearing tarpaulin has a tear of 850 or 550 g/m² Pro 5cm tarpaulin width. From the feel, the material is similar to that of a truck tarpaulin. The glossy smooth look is particularly easy to care for and can be easily cleaned. The high sun protection factor of 50+ protects the warehouse ideal from UV radiation. The tarpaulin is weatherproof all year round. Speaking of weather: an extra long XXL floor apron lets rainwater run away from the tent and gives soil moisture no chance of getting into the tentine. In addition, the soil apron protects against wind because it effectively reduces planning movements. It lies around approx. 30 cm on the floor and is conveniently attached to the tent from the inside and outside. Also an important point in the topic of tarpaulin: The Outlander tent hall is...

Lightweight non-safety occupational lace up work boot with internal waterproof membrane and flexible energy-absorbing PU Rubber outsole. Tested and certified to EN ISO 20347:2012 Occupational standard.