4395 products were found matching your search for according in 8 shops:

Holle Bio Papa Muesli 6 Months is a non-dairy porridge, with biological formula, indicated from 6 months of age. Contains whole wheat, whole oats, powdered banana pulp, raspberry pulp, pieces of apple and thiamine (in accordance with regulations). Presents Biological Certificate (according to the European biological regulation) and Demeter quality (certificate that guarantees the quality and biological and biodynamic nature of Holle ingredients). This porridge is suitable for food introduction, from 6 months onwards, as an integral part of a mixed diet. It can be prepared with or without milk or another formula for infants. Suggestion: prepare the formula for infants and add the preferred whole grain porridge. Holle porridge whole grains are easily digestible and are suitable for baby #39;s digestion. Contains no added sugars. Contains gluten.

WDM fast Ethernet media converter• Works according to standards 802.3u 10/100Base-TX, 100Base-FX.• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.• Uses WDM and transmits and receives data via a single fibre.The MC111CS is a media converter designed for converting 100BASE-FX fibre media into 100Base-TX copper media and vice versa. The MC111CS uses WDM and requires only one fibre-optic cable for transmitting and receiving data, reducing your cable costs by half. The MC111CS was designed according to the IEEE802.3u 10/100Base-TX standard and the 100Base-FX standard and is intended for use with single mode fibre-optic cables and the SC plug. The MC111CS supports the long-wave (LX) laser specification for a transfer rate corresponding to the full bandwidth. It functions at 1550nm for transmitting data and at 1310nm for receiving data. This means that the other end device, which is designed to work with the MC111CS, has to function at 1310nm for transmitting data and at 1550nm for receiving data. Other media converters from TP-LINK that could work with the MC111CS include the MC112CS.Other features of this module include: the option of using the device as a stand-alone device (no additional enclosure required) or with the 19 inch system enclosure from TP-LINK, auto MDI/MDIX for the transmission port, auto-tuning in duplex mode at the transmission port and status LED on the front. The MC111CS transmits in fibre-optic long distance mode via the single mode fibre-optic cable up to a distance of 20 km.• Auto-tuning from 10/100 Mbps and auto MDI/MDI-X at the TX port.• Offers the switch configuration for the half-duplex/full duplex transmission mode for the FX port.• Link-fault- pass-through and far-end fault minimise the loss caused by the connection error in due time.• Uses WDM and transmits and receives via a single fibre.• Fibre-optic transmission distance of up to 20 km.• Easily visible LEDs display the status, allowing the network to be easily monitored.• External power supply unit.

This set of 2 wooden bar chairs will make a timeless addition to your kitchen and dining room decor. The bar stools are made of solid acacia wood and steel and are highly stable and durable. The chair height can be adjusted according to your needs. Great care has been taken at every step of the

Here, Dallmayr has created a classic Caffé Latte, as you know it from the Cafés (including Dallmayr's own).Dallmayr has used the popular Crema D'Oro variant as the coffee foundation in Latten. The coffee is created on a mixture of Robusta and Arabica beans, which have been slowly roasted according to the special Dallmayr roasting method, which gives Dallmayr coffee its characteristic taste, and created in a full-bodied and flavorful Latte with a hint of cocoa notes.Here you get a coffee that can be enjoyed throughout the day - For the latte's soft body is suitable both for morning use, as well as it can be enjoyed as a slightly milder coffee in the afternoon.It is quick and easy to make in your Dolce Gusto machine, with just one pod. And since this pack of 16 pods contains a little more pods than usual, you are safe from running out of Latte for a while.The Dallmayr Group is headquartered in Munich, and has a history dating back to the 18th century. Dallmayr is one of Ge

Hemp ointment for joints and muscles - 100 mlHemp ointment with hemp, with addition of comfrey and chilli is made according to a traditional formula. The base of the ointment is made of natural lanoline, shea butter and beeswax. Without Vaseline.It contains cold pressed BIO hemp oil from hemp seeds that have anti-inflammatory and regenerative effect on muscle cells and tissues. It is a 100 % pure product without any undesirable chemical or petroleum based substances.     With comfrey and chili     Shea butter and natural lanoline     According a traditional formula How does this ointment differ from other hemp ointments on the market?     It does not contain Vaseline     Aside the hemp oil it also contains the plant extract Ingredients in the hemp ointmentLanoline, Cannabis Sativa Seed Oil, Cannabis Sativa Seed Extract, Butyrospermum Parkii Butter, Helianthus Annuus Seed Oil, Cetearyl Alcohol, Glycine Soya Oil, Cera Alba, Symphytum Officinale Root Extract, Capsicum Frutescens Fruit Extract, Rosmarinus officinalis Leaf Extract, Tocopherol,Phenoxyethanol, EthylhexylglycerinUsing of the hemp ointmentHemp ointment with comfrey and chili has a mild heating effect. Massaging the strained muscles helps to the feeling of relief. Blood perfusion of the skin and mobilizing the area around the joints helps getting rid of the feeling of tension that can eventually lead to pain. Time-proven help for sportsmen, seniors and hard working people.Suitable for:     Problems with movement and tension in muscles, joints and back     Upon acute problems, injuries, strained muscles, blocked back and neck     After a strenuous work or exercise for support of the regeneration of big muscles and joints     To relieve chronic back and neck pains WARNING!CONTAINS CHILI!Do not apply near eyes, mucosa tissues and groins. Wash your hands thoroughly after the application.

- Works under harsh conditions: resistant to heat and pressure - Precise fit and high quality sealing materials - Reliable engine lubrication in almost all temperature and oil pressure conditions - High dust holding capacity and filtration efficiency according to original equipment parts - Robust and corrosion resistant materials - Matching quality part: All functional and quality tests are performed - Long service life as requested by the vehicle manufacturer - Use the vehicle identification to check compatibility with your vehicle. All restrictions must be adhered to. Guarantee: 2 years Filter type: Screw-on Filter Height [mm]: 85 Thread Size: M 20 x 1.5 Outer diameter [mm]: 78 Gasket outer diameter: 72 Gasket inner diameter: 62 Bypass Valve Opening Pressure [bar]: 1.5

Expanding the frontiers of authentic storytelling. The Leica M11-P is the first camera to seamlessly integrate content authentication according to the Content Authenticity Initiative (CAI) and the C2PA standard. A ground-breaking opportunity to verify moments in time, taking responsibility for the provenance of a moment – ensuring that every photo you take stands as a hallmark of credibility, integrity, and innovation in the ever-evolving world of photography.

Options: Choose between either one or two push up bra's and choose between two different colours. Feature: These bras are designed to provide cleavage and support your bust all while remaining invisible under clothing. Adjustable: The push rod can be adjusted according to your specific shape to ensure it has a comfortable fit. Design: This bra has no heavy straps that will cut into your shoulders, has no back band, and is also front less, backless, and strapless. Women's Push Up Bra: Get a women's invisible push up bra. Washing Instructions: Wash with warm water and mild soap, and then let the product air dry. Women's Push Up Bra Living Social

Part Number: SA52-11EWA High Efficiency Red13.2mm(0.52INCH) SINGLE DIGIT NUMERIC DISPLAYDescription:The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.Features:• 0.52 inch digit height.• Common Anode• Excellent character appearance.• Easy mounting on P.C. boards or sockets.• Mechanically rugged.• Standard : gray face, white segment.• RoHS compliant.

Display size (width) 7 mmLED color redLED holder THTCharacter height 13 mmLight intensity / color R 0.4mcdNumber of digits 1Common connector Common anodeTDSL seriesRight decimal pointTop color grayPeak wavelength / color R 625nmPower dissipation (Pd) Max. 320 mWForward Current (If) Max. / Color R 15mADisplay size (length) 17.5 mmForward Voltage (VF) Max. / Color R 2.4V

Seven-segment display, red, with common anode.Symbol size: 56.9 mmHousing dimensions:Height: 70.0 mmWidth: 48.0 mmOverall height: 12 mm(660 nm)/14,000 - 31,000 µcd

SA52-11GWA, Green 13.2mm(0.52INCH) Single Digit Numeric DisplayDescription:The Green source color devices are made with Gallium-Phosphide Green Light Emitting Diode.Features:• 0.52 inch digit height.• Excellent character appearance.• Easy mounting on P.C. boards or sockets.• Mechanically rugged.• Standard : gray face, white segment.• RoHS compliant.

TC12-11SRWA, SUPER BRIGHT RED (GaAlAs)30mm (1.2 INCH) 5x7 DOT MATRIX DISPLAY, Column CathodeDescriptionThe Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.Features• 1.2 INCH MATRIX HEIGHT.• DOT SIZE 3mm.• LOW CURRENT OPERATION.• High CONTRAST AND LIGHT OUTPUT.• COMPATIBLE WITH ASCII AND EBCDIC CODES.• COLUMN CATHODE AND COLUMN ANODE AVAILABLE.• EASY MOUNTING ON P.C. BOARDS OR SOCKETS.• MECHANICALLY RUGGED.• STANDARD : GRAY FACE, WHITE DOT.• RoHS COMPLIANT.

Details: Single Digit Numeric Display/CommonAnode,RT. Hand DecimalColour: Hyper redVersion: White diffuseCharacters: 1Dimensions: 12.4 x 17.5 x 7 mmCharacter height: 13.2 mmMaterial: AlGaInPLuminosity: 110000 ucdWavelength: 645 nmShut-off voltage: 5 V.Forward voltage: 1.85 V.Forward current: 30 mAReverse current: 10 µAmax. Forward current: 185 mACapacity: 35 pFPower dissipation @ Ta = 25 °C: 75 mWOperating temperature: - 40 - 85 °C.

Seven-segment display, green, with common anode.Symbol size: 10 mmHousing dimensions:Height: 13 mmWidth: 10 mmOverall height: 7 mm(565 nm) / 1400-5600 µcdManufacturer no.: SA39-11GWA

Seven-segment display with common anodeSymbol size: 14.2 mmYellow, 588 nm, 1.9 - 4.7 mcdDimensions (H x B x overall height): 19 x 12.7 x 8 mmManufacturer no.: SA56-11YWA

Seven-segment display with common anodeSymbol size: 14.2 mmColour: BlueWavelength: 470 nmBrightness: 4.7 - 12.367 mcdDimensions (H x B x overall height): 19 x 12.7 x 8 mm

Details: Single Digit Numeric Display/CommonCathode,RT. Hand DecimalColour: Hyper redVersion: White diffuseCharacters: 1Dimensions: 12.7 x 19.05 x 8 mmCharacter height: 14.22 mmMaterial: AlGaInPLuminosity: 97000 ucdWavelength: 645 nmShut-off voltage: 5 V.Forward voltage: 1.85 V.Forward current: 30 mAReverse current: 10 µAmax. Forward current: 185 mACapacity: 35 pFPower dissipation @ Ta = 25 °C: 75 mWOperating temperature: - 40 - 85 °C.NoteReplacement for SA 52-11 RT

Seven-segment display, green, with common cathode.Symbol size: 13.5 mmHousing dimensions:Height: 17.5 mmWidth: 12.4 mmHeight 7mm(565 mm)/2200 - 5600 µcdManufacturer no.: SC52-11GWA

Alphanumeric display, red, with a common anode.Symbol height: 20.3mmHousing dimensions:27.7 x 20 x 9.5mm(660nm)/9000-21000µcdManufacturer no.: PSA08-11SRWA