138 products were found matching your search for antistatic in 3 shops:

Elevate your landscape and outdoor photography with the Hoya 77mm Fusion Antistatic CIR-PL filter. This versatile circular polarizer reduces unwanted reflections from glass, water, and other surfaces, resulting in richer colors and deeper contrast. The antistatic coating repels dust and makes cleaning a breeze, perfect for photographers on the go. Its lightweight, low-profile design minimises vignetting on wide-angle lenses.

Anti-static stand for desoldering tweezers Chip tool (0450MDJ) with sponge (0003B)

HOYA engineers have developed a new ANTISTATIC coating that acts like a force field around the filter to repel dust. Perfect for environments where dust is common, these filters require less frequent cleaning and maintenance than traditional filters.

HOYA engineers have developed a new ANTISTATIC coating that acts like a force field around the filter to repel dust. Perfect for environments where dust is common, these filters require less frequent cleaning and maintenance than traditional filters.

HOYA engineers have developed a new ANTISTATIC coating that acts like a force field around the filter to repel dust. Perfect for environments where dust is common, these filters require less frequent cleaning and maintenance than traditional filters.

 The Hoya 52mm Fusion Antistatic CIR-PL Filter is a circular polarizing filter designed to reduce reflections and glare, as well as enhance color saturation and contrast in your photos. It is made with Hoya's Super Multi-Coating, which helps to minimize flare and ghosting, and features a new antistatic coating that repels dust and makes it easier to clean.

Shield your precious lens with the Hoya 43mm Fusion Antistatic Protector Filter. This filter boasts top-notch protection without compromising image quality. Its high-grade optical glass delivers crystal-clear photos, while the multi-layer antistatic coating repels dust, making cleaning a breeze. No more worrying about fingerprints, smudges, or water spots – the filter's water-repellent and stain-resistant properties keep your shots pristine.

Adjustable loupe, antistaticQuick to perform visual inspections during soldering orchecking tipping or solder joints.Keeps your hands free to do other tasks. The lightweight loupe can simply be folded out of thefield of vision and can alsobe worn with glasses or contact lenses.Wide field of view, 2.5x magnification.

Replacement soldering tip for Ersa VAC X.• Pack of 2• Antistatic

ERSA VAC X The universal standard desoldering pump with plastic enclosure. The ERSA VAC X desoldering pump is characterised by its high suction power and its ergonomic shape. The antistatic design of the device allows desoldering tasks to be carried out on electrostatically sensitive components. The long, thin desoldering tip can also be used on very tightly equipped PCBs. And thanks to the special design, cleaning the pump and replacing the desoldering tip is ever so simple. Suction volume: 11.3 cm3Weight 0.060

Antistatic, metal desoldering device with a high vacuum pulse.• Antistatic• Metal vacuum chamber with cleaning spindle• Simple one-handed operation• Excellent suction power• Designed according to the latest ergonomic considerations• Balanced

For Easy Arm 1 and Easy Arm 2

environmental friendly material anti-acid, anti-alkali, anti-chemical flux wear resistant & scratch resistant stable performance: high and low temperature resistance good toughness & high elasticity suitable for various working desks delivered with: AS17: ESD GROUNDING CORD - Ø 1.8 mm Specifications surface: matte thickness: 2 mm conducting layer: 1.8 mm electrostatic dissipation layer: 0.2 mm material: top: static dissipative rubber bottom: conductive rubber dimensions: 70 x 100 cm surface resistance: top layer: 10^6 - 10^9 Ohm bottom layer: 10^3 - 10^5 Ohm volume resistance: 10^5 - 10^8 Ohm attrition rate: charge decay: strength: tear strength: 20.6 KN / m tensile strength: 3.6 Mpa fracture elongation: 188 % high temperature resistance: 200 - 300 °C softness: 103 - 109

The grounding mat as a safe method to dissipate electrostatic charge, suitable for table, shelf or floor.Complies with the requirements of DIN EN 61340-5-1 EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone), especially as a protective and workplace support for SMD/THT assembly.Technical data of the mat:Abrasion (load: 5N): 130 mm³Hardness: 80 Shore AIndentation test: 0.1 mmTemperature: application range up to + 60°CProduct information:Leakage resistance 10^6 to 10^7 Ohm (back side conductive 10^3 to 10^4 Ohm)Top and back black made of electrostatically conductive synthetic rubberWith 2 snap fasteners 10 mm for the earth connectionHeat resistant, abrasion resistantWear-resistant and permanently elasticHalogen-freeDimensions: 610 x 450 x 1.5 mmWeight: 500 g

Soldering padThis versatile mat is ideal for soldering and performing repairs. Heat resistant up to max. 500°C Flexible, returns to its original shape Five magnetic zones Compartment for screws With anti-slip protection, anti-adhesive Various tool holdersTechnical data Material: antistatic, silicone Dimensions: 700 x 450 mmTools in the picture not included

environmental friendly material anti-acid, anti-alkali, anti-chemical flux wear resistant & scratch resistant stable performance: high and low temperature resistance good toughness & high elasticity suitable for various working desks delivered with: AS17: ESD GROUNDING CORD - Ø 1.8 mm Specifications surface: matte thickness: 2 mm conducting layer: 1.8 mm electrostatic dissipation layer: 0.2 mm material: top: static dissipative rubber bottom: conductive rubber dimensions: 50 x 60 cm surface resistance: top layer: 10^6 - 10^9 Ohm bottom layer: 10^3 - 10^5 Ohm volume resistance: 10^5 - 10^8 Ohm attrition rate: charge decay: strength: tear strength: 20.6 KN / m tensile strength: 3.6 Mpa fracture elongation: 188 % high temperature resistance: 200 - 300 °C softness: 103 - 109

environmental friendly material anti-acid, anti-alkali, anti-chemical flux wear resistant & scratch resistant stable performance: high and low temperature resistance good toughness & high elasticity suitable for various working desks delivered with: AS17: ESD GROUNDING CORD - Ø 1.8 mm Specifications surface: matte thickness: 2 mm conducting layer: 1.8 mm electrostatic dissipation layer: 0.2 mm material: top: static dissipative rubber bottom: conductive rubber dimensions: 30 x 55 cm surface resistance: top layer: 10^6 - 10^9 Ohm bottom layer: 10^3 - 10^5 Ohm volume resistance: 10^5 - 10^8 Ohm attrition rate: charge decay: strength: tear strength: 20.6 KN / m tensile strength: 3.6 Mpa fracture elongation: 188 % high temperature resistance: 200 - 300 °C softness: 103 - 109

The grounding mat as a safe method to dissipate electrostatic charge, suitable for table, shelf or floor.Complies with the requirements of DIN EN 61340-5-1 EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone).Technical data of the mat:Abrasion (load: 5N): 130 mm³Hardness: 78 Shore AIndentation test: 0.1 mmLight reflectance 19% - 29%Temperature: application range up to + 60°CProduct information:Leakage resistance 10^6 to 10^7 Ohm (back side conductive 10^3 to 10^4 Ohm)Top and back black made of electrostatically conductive synthetic rubberWith 2 snap fasteners 10 mm for the earth connectionHeat resistant, abrasion resistantWear-resistant and permanently elasticSolder resistantHalogen-freeDimensions: 610 x 450 x 1.5 mmWeight: 700 g

The grounding mat as a safe method to dissipate electrostatic charge, suitable for table, shelf or floor.Complies with the requirements of DIN EN 61340-5-1 EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone).Technical data of the mat:Abrasion (load: 5N): 130 mm³Hardness: 78 Shore AIndentation test: 0.1 mmLight reflectance 19% - 29%Temperature: application range up to + 60°CProduct information:Leakage resistance 10^6 to 10^7 Ohm (back side conductive 10^3 to 10^4 Ohm)Top and back black made of electrostatically conductive synthetic rubberWith 2 snap fasteners 10 mm for the earth connectionHeat resistant, abrasion resistantWear-resistant and permanently elasticSolder resistantHalogen-freeDimensions: 900 x 610 x 1.5 mmWeight: 1000 g

The grounding mat as a safe method to dissipate electrostatic charge, suitable for table, shelf or floor.Complies with the requirements of DIN EN 61340-5-1 EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone), especially as a protective and workplace support for SMD/THT assembly.Technical data of the mat:Abrasion (load: 5N): 130 mm³Hardness: 80 Shore AIndentation test: 0.1 mmTemperature: application range up to + 60°CProduct information:Leakage resistance 10^6 to 10^7 Ohm (back side conductive 10^3 to 10^4 Ohm)Top and back black made of electrostatically conductive synthetic rubberWith 2 snap fasteners 10 mm for the earth connectionHeat resistant, abrasion resistantWear-resistant and permanently elasticHalogen-freeDimensions: 900 x 610 x 1.5 mmWeight: 1000 g