483 products were found matching your search for bernstein in 1 shops:

Special tweezers with ESD coating for SMD technologyHigh-quality precision tweezers made of stainless steel: rustproof, matt polished, anti-magnetic, acid-resistant.Straight, long, narrow, stepped long tipsShape BBMaterial: stainless steel SA anti-magneticSurface matt polished, smooth and glare-freeESD coating dissipative between 10^6 and 10^9 ohmsOverall length: 140 mmWeight: 13 g

Precise and accurate, for 20,000 clicks.Turn your bits and a holder into your perfect torque tool. Versatile combination and with preset torque value for tightening or loosening. Thanks to the BERNSTEIN bit adapter, it can be easily clamped between any standard holding tool and a 6.3 mm bit. This turns any bit holder into a torque screwdriver.These high-precision fine tools with 0.6 to 3.0 Nm are used in combination with 1/4 inch bits. Often as a complete solution for working on electronic devices, in quick-change systems, robot stations, aerospace, medical technology or simply on any workbench, wherever the exact torque is required. The ''click'' sound indicates when the torque is reached, so the adapter cannot be over-torqued. When loosening screws, the blocked core shaft does not trigger the torque, so no additional loosening tool is needed.Product information:preset torque: accuracy/tolerance +/-10%.for 20.000 clicksin connection with power tool max. speed 100 rpm.Torque adapter length: 28 mm (without shaft)Adapter Ø: 12 mmhexagonal shank: 6.35 mm (1/4 inch)Magnetic bit holder: 6.35 mm (1/4 inch)Material: alloy steel HRC 43-48Total length: 39 mmWeight: 21 g

High-quality cutting tweezers made of carbon steel. Ideally suited for soft copper wire, gold and silver wire up to Ø 0.25 mm.The cutting edges are particularly sharp and hard for flush cutting.For oblique cutting, cutting width 10 mm, very stableExtremely hard and sharp, optimum sharpness of the cutting edgesShape 15 AGWMaterial: carbon steel, non-magneticSurface matt polished, smooth and glare-freeFor soft wires up to Ø 0.25mm (copper wire, gold wire, silver wire etc.)Total length: 115 mmWeight: 25 gCARE NOTE: High humidity or touching with fingers (sweat) will cause carbon steel to rust. Therefore, the tweezers should always be kept dry or rubbed with oil if stored for a long time. If rust nevertheless forms on the tweezers or blade, it can be removed quite easily with a light sharpening.

Special tweezers for SMD technologyHigh-quality precision tweezers made of stainless steel: rustproof, matt polished, anti-magnetic, acid-resistant.straight, long, narrow, very pointedShape SSMaterial: stainless steel SA anti-magneticSurface matt polished, smooth and glare-freeOverall length: 140 mmWeight: 13 g

Special tweezers for SMD technology with extra fine tip.High-quality precision tweezers made of stainless steel, matt polished, anti-magnetic, acid-resistant.Straight very pointed, narrow tapered tips approx. 30 mmTip thickness 0.2 mm (+/-0.05 tolerance)Shape 2Material: stainless steel SA antimagneticSurface matt polished, smooth and glare-freeOverall length: 120 mmWeight: 15 g

Mechanic's tweezers with non-slip grip grooves for a secure hold.With two-color multilayer dip insulation red on the outside - yellow on the inside. Damage to the outer red insulation is immediately visible through the yellow insulation underneath. The advantage is a simple and always visible safety control. Our VDE tools are unit-tested according to VDE EN 60900 / IEC 60900 and approved for live working up to 1000 volts. The insulations are REACH-compliant and phthalate-free.VDE-insulatedstraightround tip serratedwith VDE protective insulation according to VDE standardshape 40material quality steelsurface nickel-platedVDE insulationTotal length 145 mmWeight 39 g

For holding and clamping - no cutting function.serrated on both sidesjaw length 25 mmMaterial quality steelsurface chrome platedstainlesstotal length 130 mmWeight 80 g

A small lever pressure is sufficient for stepless clamping with high holding force. A quick clamp to optimally align cameras, monitors. Sensors or measuring devices optimally aligned.In woodworking, carving plates, carving balls or various clamping and holding tools are used. In instrument and model making, a wide variety of clamping and holding devices are screwed on. Suitable adapters and extensions of all types can be screwed on via the thread on the ball. An optimal hold to repair e-scooters, e-bikes and bicycles free-floating. Universities, research centers and laboratories have appreciated the versatile application and use options for years.Ball joint quick clamp for heavy parts360° rotatableinfinitely adjustablequality product 100% Made in Germanyfor screwing to the workbench (space dimensions: 110x72mm)threaded pin M12 x 1,5 x 20 mmmounting surface approx Ø 20 mmangle of inclination +/- 45cast aluminumpowder coateddark grey metallicOrientation dimensions approx 80 x 170 x 75 mmweight 650 gconnection thread M12 x 1,5 mmmaximum torque: ball-Ø 40 mm approx 24 Nmball-Ø 60 mm approx 100 NmHolding forces of the ball at the height of the threaded pin: ball-Ø 40 mm approx 45 kg (441N), ball-Ø 60 mm approx140 kg (1,372N)Included in delivery:Snorr washer and lock nutLock nut for the thread

Holding components optimally with constant pressure, these high-precision tweezers guarantee an exactly coordinated tip-closure..ESD tweezers made of dissipative, black, glass fibre reinforced plastic material (Vestamid), anti-magnetic. Free of silicone and Armin.Product information:Dissipative between 10^2 and 10^4 OhmHook tip angled 16°Form 6Optimum opening angle with precise tip closingMaterial: glass fibre reinforced plasticSurface matt and smoothResistant to acidsTemperature resistant up to 175 °CTotal length: 120 mmWeight: 5 g

For all work on electrostatically sensitive components. The blades are made of quality steel to ensure torsion resistance - at maximum stress.The tips are burnished for dimensional stability and to prevent chrome chipping (except socket wrench). The rotating cap is smooth-running and allows the screwdriver to be held in position despite starting pressure. Thanks to the ergonomically shaped handle, the screwdriver fits perfectly in the hand. Handle made of ESD plastic (PP black) with a surface resistance of 10^4 to 10^6 Ohm. The matt chrome-plated blade is made of high-quality chrome-molybdenum steel (hardness> 55 HRC), hardened over the entire length, according to DIN ISO.Product information:ESD handle with rotating cap dissipative 10^4 and 10^6 Ohm ergonomically shapedBlade length: 60 mmBlade Ø: 2.5 mmBlade width: 2.0 mmBlade thickness: 0.4 mmBlades made of high quality chrome-vanadium-molybdenum steelBlack burnished tip, manufactured according to DIN ISOLength: 160 mmWeight: 16 g

Mini torque screwdriver with hexagon socket (6.3 mm) with clamping ball.The torque can be adjusted to the required size by means of a knurled screw, tolerance (+/-6%). The set value can then be locked.Tolerance: +/-6%Torque absorption: 1/4 inch (6.35 mm)Receptacle shaft Length: 15 mm, Ø 10 mm1/4 inch bit adapter for 4 mm (5/32 inch) is suppliedMaterial: quality steel and aluminiumDelivery in sturdy plastic QuadroboxTotal length: 100 mmWeight: 111 g

Slim, elegant design, max. lifting force 0.025 kg for small, light metallic objects in hard-to-reach places.In pen form with clip for carrying in breast pocket.Needle Ø 7 mm, extra hardenedtelescopic rod max. 655 mmwith magnetic holderholding force 0,025 kgtotal length 145 mmWeight 34 g

Special tweezers for SMD technology with extra fine tip.High-quality precision tweezers made of stainless steel, matt polished, anti-magnetic, acid-resistant.30° angled ultra fine, stepped tips approx. 25 mm longTip thickness 0.2 mm (+/-0.05 tolerance)Shape 5bMaterial: stainless steel SA antimagneticSurface matt polished, smooth and glare-freeOverall length: 120 mmWeight: 15 g

Trimmer for easy and safe adjustment of spindle resistors and potentiometers.Adjustment tools for the ESD area. Ceramic bits meet highest requirements due to their excellent mechanical as well as thermal properties. The hardness and breaking strength of the material zirconium oxide enable the production and use of even the smallest dimensions with the greatest possible wear resistance. A large number of electrical and electronic devices or assemblies have to be adjusted or set after the manufacturing process. Even when servicing and installing new components or when electrical values have changed due to aging, adjustment is usually necessary to restore optimum device function.ESD handle with twist cap dissipative between 10^6 and 10^9 Ohmblade length 20 mmblade Ø 3 mmblade width 1,3 mmblade thickness 0,3 mmmaterial zirconium oxide, technical ceramicsantimagnetictotal length 100 mm

For all work on electrostatically sensitive components. The blades are made of quality steel to ensure torsion resistance - at maximum stress.The tips are burnished for dimensional stability and to prevent chrome chipping (except socket wrench). The rotating cap is smooth-running and allows the screwdriver to be held in position despite starting pressure. Thanks to the ergonomically shaped handle, the screwdriver fits perfectly in the hand. Handle made of ESD plastic (PP black) with a surface resistance of 10^4 to 10^6 Ohm. The matt chrome-plated blade is made of high-quality chrome-molybdenum steel (hardness> 55 HRC), hardened over the entire length, according to DIN ISO.Product information:ESD handle with rotating cap dissipative 10^4 and 10^6 Ohm ergonomically shapedBlade length: 50 mmBlade Ø: 2.5 mmBlade width: T1Blades made of high quality chrome-vanadium-molybdenum steelBlack burnished tip, manufactured according to DIN ISOLength: 150 mmWeight: 14 g

Special tweezers for SMD technology with ESD coating and extra fine tip.High-quality precision tweezers made of stainless steel, rustproof, matt polished, anti-magnetic, acid-resistant.40° crescent-shaped bent, very pointed approx. 35 mmTip thickness 0.2 mm (+/-0.05 tolerance)Shape 7aMaterial: stainless steel SA antimagneticSurface matt polished, smooth and glare-freeESD coating dissipative between 10^6 and 10^9 ohmsOverall length: 120 mmWeight: 15 g

Trimmer for easy and safe adjustment of spindle resistors and potentiometers.Adjustment tools for the ESD area. Ceramic bits meet highest requirements due to their excellent mechanical as well as thermal properties. The hardness and breaking strength of the material zirconium oxide enable the production and use of even the smallest dimensions with the greatest possible wear resistance. A large number of electrical and electronic devices or assemblies have to be adjusted or set after the manufacturing process. Even when servicing and installing new components or when electrical values have changed due to aging, adjustment is usually necessary to restore optimum device function.ESD handle with twist cap dissipative between 10^6 and 10^9 Ohmblade length 20 mmblade Ø 3 mmblade width 2,5 mmblade thickness 0,7 mmmaterial zirconium oxide, technical ceramicsantimagnetictotal length 100 mm

Special tweezers with ESD coating for SMD technology for gripping cylindrical components and components Mini MELFs, diodes, resistors.High-quality precision tweezers made of stainless steel for easy picking up of wires. Stainless, matt polished, anti-magnetic, acid resistant.Grip recess Ø 0.8 mmStraight shapeShape 50Material: stainless steel SA antimagneticSurface matt polished, smooth and glare-freeTip width 3.0 mmOverall length: 120 mmWeight: 16 g

Universal tweezers with extra fine tip.High-quality precision tweezers made of stainless steel, rustproof, matt polished, anti-magnetic, acid-resistant.Tapered tipTip thickness 0.2 mm, tip width 0.1 mm (+/-0.05 tolerance)Shape PSFMaterial: stainless steel SA antimagneticSurface matt polished, smooth and glare-freeOverall length: 130 mmWeight: 20 g

Special tweezers for SMD technologyHigh-quality precision tweezers made of stainless steel: rustproof, matt polished, anti-magnetic, acid-resistant.Straight, very fine, stepped tips approx. 20 mm longShape 4Material: stainless steel SA anti-magneticSurface matt polished, smooth and glare-freeOverall length: 110 mmWeight: 15 g