31030 products were found matching your search for cable in 2 shops:

Cable jacket knife, VDE-tested up to 1000 V.Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation.Length: 180 mm

Fun Factory USB Magnetic Charging Cable, 103 cm, Sex toy accessories unisex, Characteristics: charges through a magnetic USB cable quick-charge modern design plastic metal designed for women designed for men How to use: Follow the instructions.

Cable knife with protective cap. VDE-tested 1000 V.Non-insulated blade backs.Length: 180 mm

Cable knife, VDE-tested 1000 V.Insulated blade backs, with protective cap. Length 180 mm

tool burnished, handles with multi-component gripsStyle 2:internal opening spring, protected and captive

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mmCutting force:Copper up to 15 mm in diameterAluminium up to 50 mm in diameter

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint.Length: 164 mmCutting force:Copper up to 15 mm in diameterAluminium up to 50 mm in diameter

Small, light, strong: pleasant cutting without squeezing at only 160 mm size.Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length!Ergonomic leg design: optimum cutting feel even with larger cable diameters. Cuts Cu and Al multi-conductor cables with fine wires up to Ø 15 mm (50 mm²). Cuts solid copper and aluminium cables up to 5 x 4 mm². Cuts without crushing.Screwed joint: precise, smooth running, durable. With clamping protection for safe working. Not suitable for steel wire and hard-drawn copper conductors.Long service life: special tool steel in special quality, forged, oil-hardened, cutting edges additionally induction-hardened.

Ergonomically designed handle shape with pleasantly designed slip guardMore safety thanks to non-slip soft componentsGood power transmission when pulling the knife through thumb recess and ''finger hook'' at the end of the handleTransparent protective capStable, fixed hook bladeSuitable for round cablesBlade: special tool steel, oil-hardened

Cable cutter insulated with multi-component casings, VDE-tested 250 mmFor cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crushing. One-hand operation using ratchet principle. Lower force requirement owing to very high transmission ratio. Two-stage sprocket drive for easy cutting. Easy to use owing to low weight and compact design.Can be used even in confined spaces. With clamping protection. Special tool steel in special quality, forged, oil-hardened

KNIPEX cable shears with double bladeCuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutting of cables up to 20 mm in diameter. Through pre-cutting and re-cutting, the brackets always remain in a hand-friendly position even with large cross sections. Special tool steel, oil-hardened and tempered, head chrome-plated, insulated handles and VDE-tested.Length: 200 mmCutting force: up to 20 mm in diameter

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mmLight, clean cut thanks to special cutting edge shapeSickle-shaped cutting edges enclose the cut material and prevent splicing of the wire ropeLittle force needed owing to incredibly high ratioWith opening spring and locking pawlCutting edges additionally inductively hardenedSpecial tool steel in special quality, forged, lubricatedWith opening spring and locking pawlLittle force needed owing to incredibly high ratioCutting edges additionally inductively hardenedFor Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mmLight, clean cut thanks to special cutting edge shapeSickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope

For hard wire cables, also suitable for cabling and round steel• Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning outChrome vanadium high-performance steel, oil-hardened and tempered

Small, light, strong: pleasant cutting without squeezing at only 160 mm size.Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length!Ergonomic leg design: optimum cutting feel even with larger cable diameters. Cuts Cu and Al multi-conductor cables with fine wires up to Ø 15 mm (50 mm²). Cuts solid copper and aluminium cables up to 5 x 4 mm². Cuts without crushing.Screwed joint: precise, smooth running, durable. With clamping protection for safe working. Not suitable for steel wire and hard-drawn copper conductors.Long service life: special tool steel in special quality, forged, oil-hardened, cutting edges additionally induction-hardened.

for cutting copper and aluminium single conductors as well as multiple stranded cablesnot suitable for steel wire and hard drawn copper conductorsprecision ground, hardened bladesclean and smooth cut without crushing and deformationeasy cutting with one-hand operationguard prevents operators’ fingers being pinchedadjustable bolted joint, self-retaining screwHigh-grade special tool steel, forged, oil-hardenedwith integrated insulated tether attachment point for a tool tether

First hand ratchet cable cutter for one and two-handed operation for cutting copper and aluminium cable up to a diameter of 60 mm.• Simple handling as a result of low weight (800 g) and compact design (320 mm in length) — can be used even in confined spaces • Cuts copper and aluminium cable up to a diameter of 60 mm in one and two-handed operation • Precision ground, hardened blades with clean and smooth cut without crushing • For cutting copper and aluminium single and multi-strand cables (not suitable for steel wire and wire cable) • Innovative two-stage sprocket drive with high transmission ratio for easy cutting in one and two-handed operation • Fixed bracket casing with footprint for fitting when cutting • Special tool steel in special quality, forged, oil-hardened Tool painted blackHandles with multi-component cases Cutting value of copper cables, multi-strand (diameter) 60 mm dia. Cutting value of copper cables, multi-strand 600 mm²MCM 1200Length: 320 mmWeight: 880 g

Cable cutters with ratchet principleFor copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitable for wire cable and steel wire. Painted/polished head, ergonomically shaped two-colour multi-component handles. Cutting capacity on copper/aluminium 52 mm in dia.Length: 280 mm

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors• With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high-strength Pliers painted blackHandles with multi-component coversCapacity 0.75 - 6.00 mm²AWG: 18 - 10Application: insulated cable shoes + plug connectorsNumber of nests 3Weight: 300 gLength: 240 mm

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm²Adjusts automatically to different conductor heights: therefore no damage to conductorLarge stripping length possibleReplaceable knivesSmooth mechanical actionLow weightHousing: plastic, glass-fibre-reinforcedKnife: special tool steel, oil-hardened

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades.Length 215 mm, nickel-plated.