298 products were found matching your search for conductive in 1 shops:

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Dimensionsfirst measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent) Imprint:product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with ESD equipment Technical note: Caution: Not suitable for battery or battery-backed boardsNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity Colour(s): black, opaque Recyclable: Yes Weldable: Yes Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.08 mm Durable: permanently volume conductive

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Dimensionsfirst measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent) Imprint:product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with ESD equipment Technical note: Caution: Not suitable for battery or battery-backed boardsNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity Colour(s): black, opaque Recyclable: Yes Weldable: Yes Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.08 mm Durable: permanently volume conductive

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Dimensionsfirst measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent) Imprint:product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with ESD equipment Technical note: Caution: Not suitable for battery or battery-backed boardsNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity Colour(s): black, opaque Recyclable: Yes Weldable: Yes Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.08 mm Durable: permanently volume conductive

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Dimensionsfirst measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent) Imprint:product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with ESD equipment Technical note: Caution: Not suitable for battery or battery-backed boardsNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity Colour(s): black, opaque Recyclable: Yes Weldable: Yes Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.08 mm Durable: permanently volume conductive

Self-adhesive warning labels in accordance with DIN 4844Contents: 10 labels

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Dimensionsfirst measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent) Imprint:product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with ESD equipment Technical note: Caution: Not suitable for battery or battery-backed boardsNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity Colour(s): black, opaque Recyclable: Yes Weldable: Yes Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.08 mm Durable: permanently volume conductive

QUADRIOS GmbH conductive ESD-Grid-Bag (C), pack of 10, 300 x 400 mm conductive antistatic bags, grid pattern, compliant with standard EN 61340-5-3, professional antistatic accessories Pack of 10 high-quality conductive ESD bags (code letter ''C'') for use within an ESD-protected area or with shielded packaging Transparent with black grid pattern for content visibility Complies with EN 61340-5-3 and RoHS, lead-free Perfect for transporting and storing sensitive electronics and technology (electrostatic sensitive devices) Scope of delivery: 10x conductive ESD bags (C) with grid pattern, dimensions: 300 x 400 mm, material thickness: 0.075 mm, volume resistance: 10^4 - 10^6 ohm, temperature range: -10 - +40°C, humidity range: 20 - 90% RH

QUADRIOS GmbH conductive ESD-Grid-Bag (C), pack of 10, 127 x 203 mm conductive antistatic bags, grid pattern, compliant with standard EN 61340-5-3, professional antistatic accessories Pack of 10 high-quality conductive ESD bags (code letter ''C'') for use within an ESD-protected area or with shielded packaging Transparent with black grid pattern for content visibility Complies with EN 61340-5-3 and RoHS, lead-free Perfect for transporting and storing sensitive electronics and technology (electrostatic sensitive devices) Scope of delivery: 10x conductive ESD bags (C) with grid pattern, dimensions: 127 x 203 mm, material thickness: 0.075 mm, volume resistance: 10^4 - 10^6 ohm, temperature range: -10 - +40°C, humidity range: 20 - 90% RH

QUADRIOS GmbH conductive ESD-Grid-Bag (C), pack of 10, 200 x 250 mm conductive antistatic bags, grid pattern, compliant with standard EN 61340-5-3, professional antistatic accessories Pack of 10 high-quality conductive ESD bags (code letter ''C'') for use within an ESD-protected area or with shielded packaging Transparent with black grid pattern for content visibility Complies with EN 61340-5-3 and RoHS, lead-free Perfect for transporting and storing sensitive electronics and technology (electrostatic sensitive devices) Scope of delivery: 10x conductive ESD bags (C) with grid pattern, dimensions: 200 x 250 mm, material thickness: 0.075 mm, volume resistance: 10^4 - 10^6 ohm, temperature range: -10 - +40°C, humidity range: 20 - 90% RH

Enables you to create your individual pre-cut parts for your electrical circuiting.Double-sided adhesive thermal conductive foil to replace mechanical connections.These thermal conductive foils feature• Good thermal properties • Two-sided adhesive layerTotal thickness [mm]: 0.127 (± 0.03)Carrier material, thickness: Polyimide 0.025 mmAdhesive layer: Acrylate (pressure-sensitive) on both sidesSpecific heat resistance: 2.7 mK/WThermal conductivity [W/m·K]: 0.37Holding force (overlapping) [MPa]: 0.86Holding force (shear force): Al 25°C 0.897 [MPa] / Al 150°C 0.345 [MPa] / Cu 25°C 0.828 [MPa] / Cu 150°C 0.31 [MPa] / Al2O3 25°C 1.17 [MPa] / Al2O3 150°C 0.34 [MPa]Temperature range: -30 °C - +125°CDielectric strength: 5 kV (AC)Flammability class: UL 94 V-0The thermal conductive foils are available in 3 different sizesIncluded with delivery:• 1 plate 100x200 mm

QUADRIOS GmbH conductive ESD-Grid-Bag (C), pack of 10, 250 x 300 mm conductive antistatic bags, grid pattern, compliant with standard EN 61340-5-3, professional antistatic accessories Pack of 10 high-quality conductive ESD bags (code letter ''C'') for use within an ESD-protected area or with shielded packaging Transparent with black grid pattern for content visibility Complies with EN 61340-5-3 and RoHS, lead-free Perfect for transporting and storing sensitive electronics and technology (electrostatic sensitive devices) Scope of delivery: 10x conductive ESD bags (C) with grid pattern, dimensions: 250 x 300 mm, material thickness: 0.075 mm, volume resistance: 10^4 - 10^6 ohm, temperature range: -10 - +40°C, humidity range: 20 - 90% RH

Enables you to create your individual pre-cut parts for your electrical circuiting.High thermal conductive silicone foils are characterised by the following properties:• Soft, elastic and compressible• Very good compensation for unevenness (gap filter)Material: Gel filmMaterial thickness [mm]: 1.0Tolerance: 0.2Thermal conductivity [W/m·K]: 1.5Contact resistance: 1*106Rth [°C in2/W]: 1.02Hardness: Stretchability [%]: 100Dielectric constant: 5.8 [50 Hz] / 5.6 [1 KHz] / 5.5 [1 MHz]Dielectric strength: 14 kV/mm (AC)Dielectric loss factor: 0.048 [50 Hz] / 0.015 [1 KHz] / 0.003 [1 MHz]Flammability class: UL 94 V-0Included with delivery:• 1 plate 300x200 mm / covered on both sides with protective film

Enables you to create your individual pre-cut parts for your electrical circuiting.Double-sided adhesive thermal conductive foil to replace mechanical connections.These thermal conductive foils feature• Good thermal properties • Two-sided adhesive layerTotal thickness [mm]: 0.127 (± 0.03)Carrier material, thickness: Polyimide 0.025 mmAdhesive layer: Acrylate (pressure-sensitive) on both sidesSpecific heat resistance: 2.7 mK/WThermal conductivity [W/m·K]: 0.37Holding force (overlapping) [MPa]: 0.86Holding force (shear force): Al 25°C 0.897 [MPa] / Al 150°C 0.345 [MPa] / Cu 25°C 0.828 [MPa] / Cu 150°C 0.31 [MPa] / Al2O3 25°C 1.17 [MPa] / Al2O3 150°C 0.34 [MPa]Temperature range: -30 °C - +125°CDielectric strength: 5 kV (AC)Flammability class: UL 94 V-0The thermal conductive foils are available in 3 different sizesIncluded with delivery:• 1 plate 200x200 mm

ApplicationsElectronics and semiconductor manufacturing, pharmaceutical and optical industriesDimensions: 230 x 230 mmdesign/execution:Cleaning wipes for use in the ESD zone (EPA), good resistance to solvents, suitable for use with ESD cleanersAdditional description:50 units, dust-free and vacuum packed in a bagRaw material/material group: 190 g continuous-filament microfibre with conductive fibres Technical note:Class 10 cleanroom, washed and vacuumedColour(s): white Surface resistance (value unit standard): 1.0 x 10e6 ohm IEC 61340-2-3

Enables you to create your individual pre-cut parts for your electrical circuiting.High thermal conductive silicone foils are characterised by the following properties:• Soft, elastic and compressible• Very good compensation for unevenness (gap filter)Material: Gel filmMaterial thickness [mm]: 0.5Tolerance: 0.1Thermal conductivity [W/m·K]: 1.5Contact resistance: 1*106Rth [°C in2/W]: 0.57Hardness: Stretchability [%]: 100Dielectric constant: 5.8 [50 Hz] / 5.6 [1 KHz] / 5.5 [1 MHz]Dielectric strength: 14 kV/mm (AC)Dielectric loss factor: 0.048 [50 Hz] / 0.015 [1 KHz] / 0.003 [1 MHz]Flammability class: UL 94 V-0Included with delivery:• 1 plate 300x200 mm / covered on both sides with protective film

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Key featuresComplies with the requirements of DIN EN 61340-5-3 and ANSI/ESD S20.20, amine-free Dimensions: first measurement (short side) is for the opening sideTolerance deviation: +/-5% (min. 5 mm) Design: flat bag with side seam and zip closure Imprint: product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with PermaStat® - ESD equipment Technical noteNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA! Colour(s): transparent pink Recyclable: Yes Weldable: Yes Surface resistance: 4.5 x 10^10 ohms IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.06 mm Durability: Experience has shown that electrical properties remained unchanged after 60 months when stored optimally.

Enables you to create your individual pre-cut parts for your electrical circuiting.Double-sided adhesive thermal conductive foil to replace mechanical connections.These thermal conductive foils feature• Good thermal properties • Two-sided adhesive layerTotal thickness [mm]: 0.127 (± 0.03)Carrier material, thickness: Polyimide 0.025 mmAdhesive layer: Acrylate (pressure-sensitive) on both sidesSpecific heat resistance: 2.7 mK/WThermal conductivity [W/m·K]: 0.37Holding force (overlapping) [MPa]: 0.86Holding force (shear force): Al 25°C 0.897 [MPa] / Al 150°C 0.345 [MPa] / Cu 25°C 0.828 [MPa] / Cu 150°C 0.31 [MPa] / Al2O3 25°C 1.17 [MPa] / Al2O3 150°C 0.34 [MPa]Temperature range: -30 °C - +125°CDielectric strength: 5 kV (AC)Flammability class: UL 94 V-0The thermal conductive foils are available in 3 different sizesIncluded with delivery:• 1 plate 100x100 mm

Graphite 33 from CRC IndustriesGraphite-based conductive paint. Acrylic resin lacquer with electrically conductive graphite powder for surface resistances between 1000 - 2000 ohm. It is a permanent conductive paint for protection against electrostatic charges and, like a lubricant varnish, is suitable as a dry lubricating coating on metals, plastics, glass and wood.For EMC-protection of plastic enclosures, we recommend highly conductive copper lacquer EMC 35. Can size: 400 ml

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Dimensionsfirst measurement (short side) is for the opening side Design: flat bag with side seam or bottom seam (machine-dependent) Imprint:product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with ESD equipment Technical note: Caution: Not suitable for battery or battery-backed boardsNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA. Provides no shielding properties despite conductivity Colour(s): black, opaque Recyclable: Yes Weldable: Yes Surface resistance: 2 x 10^3 ohms, IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.08 mm Durable: permanently volume conductive

As direct/adjacent packaging for ESDSs within a shielding package or for non-sensitive components for safe insertion into an EPA Key featuresComplies with the requirements of DIN EN 61340-5-3 and ANSI/ESD S20.20, amine-free Dimensions: first measurement (short side) is for the opening sideTolerance deviation: +/-5% (min. 5 mm) Design: flat bag with side seam and zip closure Imprint: product name, ESD symbol, recycling symbol and lot no. Material group: PE-LD with PermaStat® - ESD equipment Technical noteNot suitable as sole, adjacent packaging for electrostatic discharge sensitive devices (ESDS) outside the EPA! Colour(s): transparent pink Recyclable: Yes Weldable: Yes Surface resistance: 4.5 x 10^10 ohms IEC 61340-2-3 Density: 0.915 - 0.935 g/cm³ Film thickness: 0.06 mm Durability: Experience has shown that electrical properties remained unchanged after 60 months when stored optimally.