19185 products were found matching your search for depth in 2 shops:

The Intel® RealSense™ D435 offers the widest field of view of all our cameras, along with a global shutter on the depth sensor that is ideal for fast moving applications.A Powerful, Full-featured Depth CameraThe Intel® RealSense™ depth camera D435 is a stereo tracking solution, offering quality depth for a variety of applications. It's wide field of view is perfect for applications such as robotics or augmented and virtual reality, where seeing as much of the scene as possible is vitally important. With a range up to 10m, this small form factor camera can be integrated into any solution with ease, and comes complete with our Intel RealSense SDK 2.0 and cross-platform support.Combined Solution for Development & ProductizationThe D435 continues our commitment to developing cutting-edge vision sensing products. Combining an Intel module and vision processor together into a small form factor yields a solution ideal for both development and rapid product creation. Paired with highly customizable software, the D435 provides a low cost solution that is lightweight and powerful, enabling development of next-generation sensing solutions that can understand and interact with their surroundings.Ideal for Low Light and Wide Field of ViewThe combination of a wide field of view and global shutter sensor on the D435 make it the preferred solution for applications such as robotic navigation and object recognition. The global shutter sensors provide great low-light sensitivity allowing robots to navigate spaces with the lights off.Complete Suite for Simple IntegrationDepth camera D435 is part of the Intel® RealSense™ D400 series of cameras, a lineup that takes Intel’s latest depth-sensing hardware and software packages them into easy-to-integrate products. Perfect for developers, makers, and innovators looking to bring depth sensing to devices, Intel® RealSense™ D400 series cameras offer simple out-of-the-box integration and enable a whole new generation of intelligent vision-equipped devices.FeaturesUse Environment: Indoor/OutdoorImage Sensor Technology: Global Shutter, 3µm x 3µm pixel sizeMaximum Range: Approx. 10 meters. Accuracy varies depending on calibration, scene, and lighting condition.Depth Technology: Active IR StereoDepth Field of View (FOV): 87°±3° x 58°±1° x 95°±3°Minimum Depth Distance (Min-Z): 0.105 mDepth Output Resolution & Frame Rate: Up to 1280 x 720 active stereo depth resolution. Up to 90 fps.RGB Sensor Resolution & Frame Rate: 1920 x 1080RGB Frame Rate: 30 fpsRGB Sensor FOV (H x V x D): 69.4° x 42.5° x 77° (+/- 3°)Camera Module: Intel RealSense Module D430 + RGB CameraVision Processor Board: Intel RealSense Vision Processor D4Form Factor: Camera PeripheralLength x Depth x Height:...

This advanced metal detector could be used to locate metal from iron relics, coins and household items to precious metals like silver and gold. It is widely used on the beach, in the garden, on the floor, in the shallow water, and even up on the ceiling. Outfitted with a waterproof search coil, the

Application:Tyres Measure profile depthReadout in 0,1 mm steps for precise profile depth determinationGlare-free reading30 mm Measurement depthLight and very handyStable design made of hard brassIn practical storage bagMade In GermanyNet weight (kg): 0.05 kg

Glare-free reading Tip for depth measurement (tire profiles) Robust design made of hard brass Graduation in millimeters 0-30 mm + 1/10 mm Nonius

This all-round metal detector could be used to locate metal objects on the beach, in the garden, on the floor, in the shallow water, and even up on the ceiling. Outfitted with a waterproof search coil, the metal detector has an adjustable length up to 1m, enabling the detector to adapt ideally to

10'' shelves from Good Connections® for permanent installation in 10'' wall-mounted enclosures and network cabinets. With a mounting depth of 160 mm, the shelves provide an ideal surface for unmounted components.Technical specifications:- Material: 1.5-mm robust, powder-coated sheet steel with high load capacity- Included in delivery: 10'' shelf- Colour: light grey (RAL7035)- Hole spacing (centre/centre): 235 mm- Hole spacing (min./max.): 225/246 mm- Height units: 1U at 10'' level- Dimensions (W x D x H): 254 x 160 x 43 mm

SECUNORM 175 - Safety knife with 10 mm cutting depth and automatic blade retraction.Lightweight MARTOR all-round knife made of glass fibre reinforced plastic. Ideal for safe cutting of up to 2-ply cardboard, plastic strapping, foil, adhesive tape, etc.Automatic blade retraction for a high level of work safetySmall cutting depth for more protection of goodsEspecially ergonomic handleDouble-sided slider for right- and left-handed usersEspecially easy and safe blade change4-times usable quality blade Scope of delivery:With mounted blade INDUSTRIAL BLADE NO. 45, blade thickness 0.30 mm

SECUNORM 380 - Safety knife with 73 mm cutting depth and automatic blade retraction.Long MARTOR safety knife made of glass fibre reinforced plastic. Ideal for safe cutting of foam, polystyrene, construction foam, roll goods, etc.Automatic blade retraction for high working safetySpecial ergonomic handle (incl. soft-grip)Large-surface slider (incl. soft-grip) for right- and left-handed usersSafety device for locking the sliderLong, stable quality bladeParticularly easy and safe blade change (incl. magnet) Scope of delivery:With mounted blade STYROFOAM BLADE NO. 79, blade thickness 0.50 mm

ROLINE 19-inch wall-mounted housing Basic 9 U, 540x400 WxD kit blackFeatures:Load capacity: 60 kgFront door made of tempered glass, lockable1-point locking system on the front doorRoof and base with cable routingVentilation slots for passive ventilation and air extractionRoof with cut-out for fan modulesIP protection class: IP20Mounted: NoThe 19-inch wall cabinets of the ROLINE Basic series are supplied unassembled as delivered as a flat pack (kit). Each cabinet consists of a robust steel construction up to 1.5 mm thick sheet steel. Assembly is quick and easy thanks to thequickly and easily thanks to the and quick to carry out.Scope of delivery:19-inch wall-mounted housing Basic 9 U as a kit2x keyassembly instructionsPlease enter a telephone number in the CheckOut, as this item may be sent by forwarding agent.

ROLINE 19-inch wall-mounted housing Basic 9 U, 540x400 WxD kit grayFeatures:Load capacity: 60 kgFront door made of tempered glass, lockable1-point locking system on the front doorRoof and base with cable routingVentilation slots for passive ventilation and air extractionRoof with cut-out for fan modulesIP protection class: IP20Mounted: NoThe 19-inch wall cabinets of the ROLINE Basic series are supplied unassembled as delivered as a flat pack (kit). Each cabinet consists of a robust steel construction up to 1.5 mm thick sheet steel. Assembly is quick and easy thanks to the quickly and easily thanks to the and quick to carry out.Scope of delivery:19-inch wall-mounted housing Basic 9 U as a kit2x keyassembly instructionsPlease enter a telephone number in the CheckOut, as this item may be sent by forwarding agent.

The 19'' network wall housing from good connections is ideal for all common applications in the it and telecommunications sector thanks to its fast mounting and stable steel construction. The low depth of 550 mm makes space-saving installation possible. The pre-assembled wall housing consists of a central section with swivel frame, a lockable safety glass viewing door and two lockable side panels. The removable side walls and the rear-mounted swivel frame provide optimum access behind the built-in components. A wide range of accessories is available for the 19'' wall housing.Quick and easy wall mounting: The back of the swivel frame is simply screwed onto the wall. The swivel frame can be removed from the housing for easier installation.Details:- lockable safety glass door, swivel frame and side panels for greater safety- right/left door stop can be changed (factory-fitted to the right)- removable side panels for better access to the components- swivel frame (depth: 10 cm) mounted on the back for folding out the front housing section- ventilation slots for active and passive ventilation- already built-in fan (120 mm) on the housing cover incl. protective contact connection cable and fan grillee - depth variable 19'' profile rails on the front and rear- maximum installation depth between the profile rails: 41 cm- the height markings on the profile rails facilitate the assembly of the components- each cable feed is installed once on the top and bottom sides of the swivel frame and the central section- the cable entries on the top are equipped with brush strips to protect against dirt entry, the lower cable entries can be closed by covers- three ground points (front door and two floors)- swivel frame can be removed for easier installation (left-hand contact, stop cannot be changed)- Wall housing is supplied pre-assembledTechnical Specification:- material: 1.0-1.2 mm sheet steel with high load capacity (powder coated) - degree of protection: IP20- scope of delivery: Pre-assembled wall housing including two keys and 20 fixing kits (cage nut, screw, washer)- Color: Deep black (RAL9005)- Height units: 6HE in the 19'' level- dimensions (WxDxH): 600 x 550 x 370 mm

The 19'' network wall housing from good connections is ideal for all common applications in the it and telecommunications sector thanks to its fast mounting and stable steel construction. The low depth of 550 mm makes space-saving installation possible. The pre-assembled wall housing consists of a central section with swivel frame, a lockable safety glass viewing door and two lockable side panels. The removable side walls and the rear-mounted swivel frame provide optimum access behind the built-in components. A wide range of accessories is available for the 19'' wall housing.Quick and easy wall mounting: The back of the swivel frame is simply screwed onto the wall. The swivel frame can be removed from the housing for easier installation.Details:- lockable safety glass door, swivel frame and side panels for greater safety- right/left door stop can be changed (factory-fitted to the right)- removable side panels for better access to the components- swivel frame (depth: 10 cm) mounted on the back for folding out the front housing section- ventilation slots for active and passive ventilation- already built-in fan (120 mm) on the housing cover incl. protective contact connection cable and fan grillee - depth variable 19'' profile rails on the front and rear- maximum installation depth between the profile rails: 41 cm- the height markings on the profile rails facilitate the assembly of the components- each cable feed is installed once on the top and bottom sides of the swivel frame and the central section- the cable entries on the top are equipped with brush strips to protect against dirt entry, the lower cable entries can be closed by covers- three ground points (front door and two floors)- swivel frame can be removed for easier installation (left-hand contact, stop cannot be changed)- Wall housing is supplied pre-assembledTechnical Specification:- material: 1.0-1.2 mm sheet steel with high load capacity (powder coated) - degree of protection: IP20- scope of delivery: Pre-assembled wall housing including two keys and 20 fixing kits (cage nut, screw, washer)- Color: Light gray (RAL7035)- Height units: 6HE in the 19'' level- dimensions (WxDxH): 600 x 550 x 370 mm

ROLINE 19-inch wall-mounted housing Basic 12 U, 540x400 WxD kit blackFeatures:Load capacity: 60 kgFront door made of tempered glass, lockable1-point locking system on the front doorRoof and base with cable routingVentilation slots for passive ventilation and air extractionRoof with cut-out for fan modulesIP protection class: IP20Mounted: NoThe 19-inch wall cabinets of the ROLINE Basic series are supplied unassembled as delivered as a flat pack (kit). Each cabinet consists of a robust steel construction up to 1.5 mm thick sheet steel. Assembly is quick and easy thanks to the quickly and easily thanks to the and quick to carry out.Scope of delivery:19-inch Basic 12 U wall-mounted housing kit2x keyassembly instructions Please enter a telephone number in the CheckOut, as this item may be sent by forwarding agent.

The 10'' network wall housing from good connections® is ideal for all common applications in the it and telecommunications sector thanks to its fast mounting and stable steel construction. The low depth of 300 mm makes space-saving installation possible. The pre-assembled wall housing consists of a central section with a lockable viewing door and two lockable side panels. The removable side walls provide optimal access behind the built-in components. A wide range of accessories is available for the 10'' wall housing.Details:- lockable safety glass door and lockable side panels for greater safety- right/left door stop can be changed without tools (factory-fitted to the right)- removable side panels for better access to the components- ventilation slots for active and passive ventilation- preparation for 120 mm fan on the housing cover (fan not included in delivery, manufacturer no.: GC-N0102)- Depth Variable 10'' Profile Rails - Max. Installation depth: 220 mm (distance from mounting rail to rear wall)- the height markings on the profile rails facilitate the assembly of the components- the cable feed at the top is equipped with a brush strip to protect against dirt entry, the lower cable feed is lockable by a cover- two ground points on the ground and front door- Wall housing is supplied completely pre-assembledTechnical Specification:- material: 1.0-1.2 mm robust, powder-coated steel sheet with high load capacity - degree of protection: IP20- scope of delivery: Pre-assembled wall housing including two keys and 20 fixing kits (cage nut, screw, washer)- Color: Pure white (RAL9010)- Height units: 9HE in the 10'' level- dimensions (WxDxH): 312 x 300 x 485 mm

ROLINE 19-inch wall-mounted housing Basic 7 U, 540x400 WxD kit grayFeatures:Load capacity: 60 kgFront door made of tempered glass, lockable1-point locking system on the front doorRoof and base with cable routingVentilation slots for passive ventilation and air extractionRoof with cut-out for fan modulesIP protection class: IP20Mounted: NoThe 19-inch wall cabinets of the ROLINE Basic series are supplied unassembled as delivered as a flat pack (kit). Each cabinet consists of a robust steel construction up to 1.5 mm thick sheet steel. Assembly is quick and easy thanks to the quickly and easily thanks to the and quick to carry out.Scope of delivery:19-inch wall-mounted housing Basic 7 U as a kit2x keyassembly instructionsPlease enter a telephone number in the CheckOut, as this item may be sent by forwarding agent.

ROLINE 19-inch wall-mounted housing Basic 7 U, 540x400 WxD kit blackFeatures:Load capacity: 60 kgFront door made of tempered glass, lockable1-point locking system on the front doorRoof and base with cable routingVentilation slots for passive ventilation and air extractionRoof with cut-out for fan modulesIP protection class: IP20Mounted: NoThe 19-inch wall cabinets of the ROLINE Basic series are supplied unassembled as delivered as a flat pack (kit). Each cabinet consists of a robust steel construction up to 1.5 mm thick sheet steel. Assembly is quick and easy thanks to the quickly and easily thanks to the and quick to carry out.Scope of delivery:19-inch wall-mounted housing Basic 7 U as a kit2x keyassembly instructionsPlease enter a telephone number in the CheckOut, as this item may be sent by forwarding agent.

Our powerful metal detector is designed to locate metals like iron, silver, copper, etc. in various ground types with great accuracy. Powerful function: The pinpoint function allows the users to target the metal in different ground types with great accuracy. It could detect coin-sized objects up to

The 10'' network wall-mounted cabinet from Good Connections® is ideal for all common applications in the EDP and telecommunications sector thanks to quick assembly and stable steel construction. The small depth of 300 mm enables a space-saving installation. The wall-mounted enclosure, which is supplied fully assembled, consists of a central section with a lockable viewing door and two lockable side sections. Optimal access behind the installed components is provided by the removable side panels. A wide range of accessories is available for the 10'' wall-mounted enclosure.Details:Lockable safety glass door and lockable side panels for added securityRight/left door hinges can be changed without tools (factory hinged right)Removable side panels for better access to the installed componentsVentilation slots for active and passive ventilationPreparation for 120 mm fan at the case top (fan not included, manufacturer no.: GC-N0102)Depth variable 10'' profile railsMax. Installation depth: 220 mm (distance between profile rail and rear panel)Drawn height markings on the profile rails facilitate the installation of the componentsThe cable entry on the top side is equipped with a brush strip to protect against dirt ingress, the lower cable entry can be closed by a coverTwo grounding points on the bottom and front doorWall-mounted enclosure is supplied fully assembledTechnical specification:Material: 1.0-1.2 mm robust, powder-coated steel sheet with high load capacityProtection class: IP20Package Contents: fully assembled wall-mounted enclosure including two keys and 20 fixing sets (cage nut, screw, washer).Color: Light gray (RAL7035)Height units: 12 U in the 10'' levelDimensions (WxDxH): 312 x 300 x 615 mm

The 10'' network wall-mounted cabinet from Good Connections® is ideal for all common applications in the EDP and telecommunications sector thanks to quick assembly and stable steel construction. The small depth of 300 mm enables a space-saving installation. The wall-mounted enclosure, which is supplied fully assembled, consists of a central section with a lockable viewing door and two lockable side sections. Optimal access behind the installed components is provided by the removable side panels. A wide range of accessories is available for the 10'' wall-mounted enclosure.Details:Lockable safety glass door and lockable side panels for added securityRight/left door hinges can be changed without tools (factory hinged right)Removable side panels for better access to the installed componentsVentilation slots for active and passive ventilationPreparation for 120 mm fan at the case top (fan not included, manufacturer no.: GC-N0102)Depth variable 10'' profile railsMax. Installation depth: 220 mm (distance between profile rail and rear panel)Drawn height markings on the profile rails facilitate the installation of the componentsThe cable entry on the top side is equipped with a brush strip to protect against dirt ingress, the lower cable entry can be closed by a coverTwo grounding points on the bottom and front doorWall-mounted enclosure is supplied fully assembledTechnical specification:Material: 1.0-1.2 mm robust, powder-coated steel sheet with high load capacityProtection class: IP20Package Contents: fully assembled wall-mounted enclosure including two keys and 20 fixing sets (cage nut, screw, washer).Color: Pure white (RAL9010)Height units: 12 U in the 10'' levelDimensions (WxDxH): 312 x 300 x 615 mm

19'' shelves from Good Connections® for permanent installation in 19'' wall-mounted enclosures and network cabinets. With a mounting depth of 270 mm, the shelves provide an ideal surface for unmounted components. The perforated sheet steel guarantees a high load-bearing capacity and improved air circulation. Please note that this product is sold in a set of two!Technical specifications:- Material: 1.5-mm robust, powder-coated sheet steel with high load capacity- Included in delivery: two 19'' shelves, eight mounting kits (cage nut, bolt, washer)- Colour: light grey (RAL7035)- Hole spacing (centre/centre): 190 mm- Hole spacing (min./max.): 130/250 mm- Height units: 1U at 19'' level- Dimensions (W x D x H): 483 x 272 x 47 mm