1699 products were found matching your search for direction in 2 shops:

Reliably detects people passing a door and is able to register the number of people as well as the passage directionThe Homematic IP Passage Sensor with Direction Recognition is part of the Homematic IP smart home system and reliably detects persons when passing a door or passageway The number of persons and passage direction is registered. The sensor is able to detect persons during day and night within a detection range of up to 4.5 meters. The detection angle is 66°. If the sensor is used in connection with other Homematic IP devices, various application scenarios can be realised. For example, the room light can automatically be switched on when entering the room and off when leaving the room. Furthermore, the sensor can be used for triggering of alarms. The device is mounted horizontally to the ground and can be positioned not only in the door frame, but also on different surfaces and locations in buildings. At a mounting height from 80 centimetres, the detection of pets will be avoided. An integrated tamper contact offers additional security. Two LR6 batteries offer power supply for the presence sensor of up to two years. The device is installed either using double-sided adhesive strips or with two little screws. The required mounting material is supplied.Optimised detection range of approximately 4.5 m and a detection angle of 66° – reliable detection also in the darkIn connection with other Homematic IP devices lights can be switched on when entering a room and they are switched off when leaving a room, depending on the predefined passage directionIn addition, the sensor can be used for triggering an alarmIdeal for application in the side part of the door frame thanks to battery operation and its compact designCan be flexibly mounted with supplied adhesive strips or screwsUnintended detection of pets can be avoided by a mounting hight of at least 80 cmWarning via the Homematic IP app about unauthorised removal or manipulation thanks to integrated tamper contactCan be used with the Access Point in connection with the Homematic IP app (no recurring costs), the Homematic Central Control Unit CCU2 as well as with various partner solutions

PCE Instruments wind direction meter PCE-WV ARobust PA plastic enclosureIP 65 protection4 - 20 mA outputLong-lasting0 - 360 ° measuring rangeMeasurement from 0.8 m/sProduct benefits:The wind direction meter was developed to measure the wind direction in industrial environments. This wind direction meter can be connected to data loggers, process control systems and displays. A 4 - 20-mA signal is available as an output signal on the wind direction meter. The wind direction meter has no blind spot in the north and measures the wind direction from 0 - 360 °. To protect the wind direction meter from external weather influences, it features an IP65 rating. A 20 m cable is fitted to the wind direction meter to connect it to an evaluation system. The wind direction meter can be used for irrigation control, automation in greenhouses, on solar trackers, cable cars in ski resorts, cranes, wind turbines, weather stations and wherever the wind or wind direction needs to be monitored closely.

Harmony XD5 - Complete plastic devicesHarmony XD5 are 22 mm diameter plastic control and signaling devices that come complete with mounting flange and auxiliary switch block. Designed for industry, Harmony control and signaling devices combine easy installation with great flexibility and a wide range of designs. Together with the Harmony XAL plastic enclosures and Harmony XAP metal enclosures, you can create your individual control enclosures.Complete unit, 22 mm, lever length 54 mm, 1-stage, 1 S per directionDirections: 2Positions: 3Retraction zero position: YesSupplied with mounting flange and auxiliary switch block

This new practical tester, developed in line with safety standard CAT III 600 V, in a robust, modern design was designed to display phases, the absence of phases and the direction of rotation on an LCD display.• Test leads with robust crocodile clips for easy connection• 3-phase measurements from 40 - 690 VAC• No battery required• Safety: IEC-61010 CAT III 600 V, safety class IP-40• Dimensions (W x H x D): 70 x 130 x 32 mm• Weight: 130 g• Measuring voltage range: 40 - 690 VAC• Frequency range: 15 - 400 Hz• Test current: 1 mA/phase• Current consumption: 1 mA• Includes: test leads, crocodile clips, case and user manual

Harmony XD5 - Complete plastic devicesHarmony XD5 are 22 mm diameter plastic control and signaling devices that come complete with mounting flange and auxiliary switch block. Designed for industry, Harmony control and signaling devices combine easy installation with great flexibility and a wide range of designs. Together with the Harmony XAL plastic enclosures and Harmony XAP metal enclosures, you can create your individual control enclosures.Complete unit, 22 mm, lever length 54 mm, 1-stage, 1 S per directionDirections: 2Positions: 3Retraction zero position: No.Supplied with mounting flange and auxiliary switch block

Harmony XD5 - Complete plastic devicesHarmony XD5 are 22 mm diameter plastic control and signaling devices that come complete with mounting flange and auxiliary switch block. Designed for industry, Harmony control and signaling devices combine easy installation with great flexibility and a wide range of designs. Together with the Harmony XAL plastic enclosures and Harmony XAP metal enclosures, you can create your individual control enclosures.Complete unit, 22 mm, lever length 54 mm, 1-stage, 1 S per directionDirections: 4Positions: 5Retraction zero position: YesSupplied with mounting flange and auxiliary switch block

Harmony XD5 - Complete plastic devicesHarmony XD5 are 22 mm diameter plastic control and signaling devices that come complete with mounting flange and auxiliary switch block. Designed for industry, Harmony control and signaling devices combine easy installation with great flexibility and a wide range of designs. Together with the Harmony XAL plastic enclosures and Harmony XAP metal enclosures, you can create your individual control enclosures.Complete unit, 22 mm, lever length 54 mm, 1-stage, 1 S per directionDirections: 4Positions: 5Retraction zero position: No.Supplied with mounting flange and auxiliary switch block

RF ModuleKrakenSDR is a software-defined, coherently operated five-RX channel radio based on RTL-SDRA coherent radio enables very versatile applications, such as radio direction finding and beamforming. Some use cases include:Physically locating an unknown transmitter of interest (e.g., illegal or jamming transmissions, noise transmissions, or just out of curiosity).Amateur radio experiments such as fox hunting or monitoring repeater misuseTracking objects, wildlife, or pets outside of network coverage through the use of low-power beaconsLocating emergency beacons for search and rescue teamsLocating lost vessels via VHF radioBeamformingInterferometry for radio astronomyMain featuresCoherence-capable RTL-SDR with five channels, all clocked by a single local oscillatorBuilt-in hardware for automatic coherence synchronizationAutomatic coherence synchronization and management via included Linux software24 MHz to 1766 MHz tuning range (standard R820T2 RTL SDR range and possibly higher with hacked drivers)4.5 V bias tee on each portThe DAQ and DSP core software is open source and designed to run on a Raspberry Pi 4 (see links below)DF software for Android (free for non-commercial use).

The field-attachable Cat. 6A RJ45 network connector from Good Connections® is suitable for quick and tool-free installation on network cables and is up to 10 gigabit-capable. The RJ45 plug can be installed easily and securely with the threading aid and is suitable for cable diameters from 6.5 mm to 8.5 mm. The RJ45 plug is equipped with strain relief for greater tensile strength and safety.With this single network connector, you are equipped for all applications during on-site installation. The cable can be fed out directly to the rear as standard. By using the supplied angled cap, you get an angled network connector - ideal for confined spaces. The angled cap allows you to lead the cable out of the plug to the left, right, top or bottom. You can use this network connector in a total of five different orientations.Technical specification:Tool-free / field-attachable RJ45 connectorCat. 6A specification, 500 MHzContacts: Phosphor bronze alloy, gold-platedShielded (STP) zinc die-cast housingSuitable for solid conductors (installation cable) AWG 26/1 to AWG 22/1Suitable for stranded conductors (patch cables) AWG 27/7 to AWG 22/7Suitable cable diameters: 6.5 mm - 8.5 mmStrain reliefSuitable for Power over Ethernet (PoE)Operating temperature: - 40 °C to +70 °CPackage Contents: 1x shielded RJ45 plug1x threading aid1x copper foil1x elbow1x dust cap1x strain relief1x assembly instructions

Unique rotation direction tester for three-phase power supply systems and motorsThe unique tester Fluke 9062 provides a rotating field and motor rotation indicator display combined with the advantages of non-contact measurement. Fluke 9062 is designed for commercial and industrial applications and provides a quick view of the three-phase rotation direction when using the supplied test leads. You can also use the device to determine the rotation direction of synchronous and asynchronous three-phase motors. The non-contact measurement is ideal for motors in which the shaft is not visible. The supplied test probes have a variable clamping range, providing a secure contact for industrial power sockets.• 3-phase display• Display of phase rotation direction• Display of motor rotation direction• Non-contact measurement of the rotation direction of the running motorsTechnical data:Voltage range: up to 400 VPhase display: 120 - 400 V ACFrequency range: 2 - 400 HzBattery life: continuousDust/waterproof: IP 40Safety: EN 61010, EN 61557-7Over-voltage category: CAT III 300 VDimensions: 124 x 61 x 27 mmWeight: 0.15 kgBatteries: 1 x 9 VIncluded with delivery:Rotation direction tester for three-phase supply systems and motors3 test leads3 test probes3 crocodile clips9-V batteryUser manual

Has the knackDetermining the direction of rotation in a three-phase power supply to check electrical connections? No problem with the Wiha direction of rotation indicator with integrated phase display. Both the direction of rotation and the live phases are reliably indicated with the help of an LED display. An alligator clip included in the scope of delivery enables easy connection, e.g. to a motor terminal board. In combination with the supplied test probes, the rotary field direction indicator from Wiha offers great flexibility when testing. The rotary field direction indicator works with the mains voltage itself, so no batteries are required. According to the measurement category CAT III up to 1,000 V and CAT IV up to 600 V, the rotation direction indicator offers maximum safety for work directly at the source of low-voltage installations.Product advantages:simplifies your work: LED display for easy-to-read measurement resultsincreases your efficiency: easy determination of the rotating field and phase display in only one toolincreases your flexibility: Test probes for variable application possibilities

Take the hassle out of vlog and interview audio with the wireless ECM-W2BT. Because it's wireless, it allows stress-free shooting and delivers clear audio in diverse environments, without worrying about the direction of the mic or the distance from the mic.

Pipe wrench by Knipex - slim, S-type jaw.jaws with offset teeth in opposite directionteeth additionally induction hardenedthree-point contact on pipes, self-lockingI-beam handle designcaptive adjusting nutred powder coated, jaws bright groundchrome vanadium electric steel, forged, multi stage oil-hardened

Pipe wrench by Knipex - slim, S-type jaw.jaws with offset teeth in opposite directionteeth additionally induction hardenedthree-point contact on pipes, self-lockingI-beam handle designcaptive adjusting nutred powder coated, jaws bright groundchrome vanadium electric steel, forged, multi stage oil-hardened

Pipe wrench by Knipex - slim, S-type jaw.jaws with offset teeth in opposite directionteeth additionally induction hardenedthree-point contact on pipes, self-lockingI-beam handle designcaptive adjusting nutred powder coated, jaws bright groundchrome vanadium electric steel, forged, multi stage oil-hardened

Pipe wrench by Knipex - slim, S-type jaw.jaws with offset teeth in opposite directionteeth additionally induction hardenedthree-point contact on pipes, self-lockingI-beam handle designcaptive adjusting nutred powder coated, jaws bright groundchrome vanadium electric steel, forged, multi stage oil-hardened

Fine ratchet sound from the handle.The integrated ratchet with fine toothing eases and accelerates workingReversing lever for comfortable clockwise/counterclockwise direction changeEasy to use thanks to the ratchet mechanism being completely embedded in the handleErgonomic two-component handle with finger grip recesses and a pleasant feel for very high power transmission and fatigue-free workingQuick-release sleeve ensures a very fast working speedRapidaptor bit holder with quick-release sleeve ensures lightning-fast bit changes and fast working speedFor bits with 1/4'' external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.317-pieceTextile box with 1x T-handle bit holder 416 RA with ratchet function and Rapidaptor quick-release chuck, 16 tough bits, 1/4'', 89 mm long416 RA 1x 1/4''x45851/4 Z 1x PH 2x89, 1x PH 3x89855/4 Z 1x PZ 2x89, 1x PZ 3x89867/4 Z TORX®1x TX 10x89, 1x TX 15x89, 1x TX 20x89, 1x TX 25x89, 1x TX 30x89, 1x TX 40x89840/4 Z 1x 3.0x89, 1x 4.0x89, 1x 5.0x89, 1x 6.0x89, 1x 8.0x89 800/4 Z 1x 1.0x5.5x89K 120 1x 50.0x120.0

SharpenerProduct InformationFor all standard-strength pencils up to 8.2 mmFor left-and right-handed peopleWith tip stop indicatorTips in both directions, ratchet function

Vintage Edition Standard 230 V LED Pear E27 250 lm 5 W 1800 K dimmable goldThe general bulb with an output of 5 W emits light in all directions. Even large lampshades are evenly illuminated. It emits a cosy golden light colour and fits in any standard E27 socket. The bulb is dimmable.Made from high-quality solid glassWarm and homely light in the style of a carbon filamentEfficient LED technologyDimmable

Miracle Mosaic Edition Standard 230 V LED globe G125 E27 470 lm 5 W 2700 K dimmable blueThe blue Miracle Mosaic Globe with an output of 5 W emits light in all directions. The inner corn emits a pleasantly warm-white light colour and it fits in any standard E27 socket. Thanks to its mosaic surface, it creates very special lighting effects and also looks great as a home accessory when not illuminated.Decorative all-round lightWe recommend using this bulb for decorative effect lightColour temperature: 2700 K - warm whiteEfficient LED technology