2682 products were found matching your search for distance in 1 shops:

ELT Ultrasonic LoRaWAN ultrasonic sensor 5mLoRaWAN certified CMCompatible with LoRaWAN® 1.0.3Measures the ambient temperatureMeasures the humidity of the environmentMeasures the ambient atmospheric pressureIP67 classificationBattery operatedNFC for configurationThe ELT ultrasonic is installed in an IP67 housing, making it ideal for outdoor installation or in extreme conditions. Use the distance sensor to measure the fill level in containers, it is also possible to measure the water level under a bridge or the level in waste garbage cans. There are also sensors for ambient temperature, humidity, atmospheric pressure and acceleration.The battery life is estimated to be up to 10 years, but depends on the sampling interval, transmission interval, data rate and environmental factors. The sensor is powered by a 3.6V AA lithium battery.Attention: This device is supplied without battery and antenna

Aluminum SAT dish wall bracketWall bracket material: aluminumTube Ø: 50 mm, 2 mmdistance from wall: 250 mmHeight vertical: 250 mmmounting plate: 150 mm x 150 mm x 4 mmmax satellite dish Ø: 850 mm

LDDS75 LoRaWAN Distance Detection SensorLoRaWAN 1.0.3 Class AUltra low power consumptionDistance Detection by Ultrasonic technologyFlat object range 280mm - 7500mmCable Length : 25cmTemperature CompensationBands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865AT Commands to change parametersUplink on periodicallyDownlink to change configureIP66 Waterproof Enclosure8500mAh Battery for long term useThe Dragino LDDS75 is a LoRaWAN Distance Detection Sensor for Internet of Things solution.It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.The LDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.The LoRa wireless technology used in LDDS75 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.LDDS75 is powered by 8500 mA Li-SOCI2 battery, designed for long term use up to 10 years*.Each LDDS75 pre-loads with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect if there is network coverage, after power on. *Actually lifetime depends on network coverage and uplink interval and other factors.ApplicationsHorizontal distance measurementLiquid level measurementParking management systemObject proximity and presence detectionIntelligent trash can management systemRobot obstacle avoidanceAutomatic control, sewerBottom water level monitoring

VGA/audio distance up to: 300 m Cat5e/Cat6 1920x1200 Euro/Type C (CEE 7/16)Connect a transmitter and receiver using a Cat5e or Cat6 cableLong-distance transmission - up to 300 mResolution: up to 1920 x 1280 at 85 Hz (max.)Supports one local and one remote VGA monitorAdjustable gain and peak controlTransmitter input connection: 1x VGA/1x 3.5 mmTransmitter output connection: 1x VGA/1x RJ45/1x 3.5-mm jackReceiver input connection: 1x RJ45Receiver output connection: 1x VGA/1x 3.5-mm jackThis professional extender offers a complete set of transmitters and receivers to extend the audio and video signal from your PC to your monitor and speakers.Audio and visual data can be transmitted from the transmitter (near your PC) to the receiver (near your monitor) over distances of up to 300 metres without signal loss.For optimal image quality, a UTP/FTP or SFTP cable of Cat. 5e/6 can be used.You can also connect a local monitor and speakers to the transmitter unit.

Ultrasonic Distance/Level SensorEM500-UDL provides highly accurate distance measurement for a variety of applications in harsh environments like flood monitoring, waste water management, fill level monitoring in grains or fertilizer. The measurement is based on ultrasonic waves transmitted and reflected back from nearby objects.Measuring ranges from 0.3 m to 10 mMeasurements in very small containers or openingsSuitable for measuring benign and chemical mediumsNon-contact detection for any corrosive liquid chemicals or combustiblesSnow Level MonitoringIn cold winter, by leveraging LoRaWAN-based snow level monitoring solution, government departments can take timely response to heavy snowfalls and avoid confronting with long-time road restriction. The EM500-UDL ultrasonic distance level sensor can help create a network that helps improve field visibility and makes a city smarter.Tank Level MonitoringMeasuring tank levels in industrial applications is a difficult task to carry out with repeated accuracy and reliability. We can continue to take use of the inexpensive traditional stick made of wood, metal or plastic and inspect it by our sense, but it’s labor cost and easy to error-making due to the manual reporting methods.LoRaWAN Wireless TransmissionUltra-low power consumption and easy deploymentBuilt-in 19000 mAh high-capacity battery can be used for 10 years.

Ultrasonic Distance/Level SensorEM500-UDL provides highly accurate distance measurement for a variety of applications in harsh environments like flood monitoring, waste water management, fill level monitoring in grains or fertilizer. The measurement is based on ultrasonic waves transmitted and reflected back from nearby objects.Measuring ranges from 0.3 m to 10 mMeasurements in very small containers or openingsSuitable for measuring benign and chemical mediumsNon-contact detection for any corrosive liquid chemicals or combustiblesSnow Level MonitoringIn cold winter, by leveraging LoRaWAN-based snow level monitoring solution, government departments can take timely response to heavy snowfalls and avoid confronting with long-time road restriction. The EM500-UDL ultrasonic distance level sensor can help create a network that helps improve field visibility and makes a city smarter.Tank Level MonitoringMeasuring tank levels in industrial applications is a difficult task to carry out with repeated accuracy and reliability. We can continue to take use of the inexpensive traditional stick made of wood, metal or plastic and inspect it by our sense, but it’s labor cost and easy to error-making due to the manual reporting methods.LoRaWAN Wireless TransmissionUltra-low power consumption and easy deploymentBuilt-in 19000 mAh high-capacity battery can be used for 10 years.

With internal and external thread

DSH-2-A distance set, hexagon head with pressed-on washer, 6.0 x 75 (29 - 33) mm, partial thread (L1), SW 8, E19+SD24, stainless steel A2/plastic, bare, anti-friction coating, ETA-11/0106, 100 pcs. DescriptionDSH-2-A distance set - the complete packageBENEFITS:DRIBO® drilling segment for reducing the splitting effect in wood.SIT® drive ensures stable screwing without wobbling.PRODUCT FEATURES:External hexGreat power transmissionSIT®Fast drive connectionWobble-free screwingMaximum power transmission without the risk of strippingProcessing with standard TX bit possibleFlat round headLarge, flat contact surfaceHigh contact pressurePerfect fit and looks goodHexagon head with pressed-on diskGreat power transmissionRobust and resistant to dirtHigh contact pressureNo damage to the component by the screw-in toolExcellent for painted headsShield sealDurableUV-stableExcellent adaptation to corrugated profiles

for flat screens 37'' - 70'' (94 - 178 cm)loads up to 35 kgwall distance: 19,5 mmDetails: VESA max. 600 x 400inclusive accessories and manualin gift box

DSH-2-A distance set, hexagon head with pressed-on washer, 6.0 x 90 (34 - 38) mm, partial thread (L1), SW 8, E19+SD24, stainless steel A2/plastic, bare, anti-friction coating, ETA-11/0106, 100 pcs.DescriptionDSH-2-A distance set - the complete packageBENEFITS:DRIBO® drilling segment for reducing the splitting effect in wood.SIT® drive ensures stable screwing without wobbling.PRODUCT FEATURES:External hexGreat power transmissionSIT®Fast drive connectionWobble-free screwingMaximum power transmission without the risk of strippingProcessing with standard TX bit possibleFlat round headLarge, flat contact surfaceHigh contact pressurePerfect fit and looks goodHexagon head with pressed-on diskGreat power transmissionRobust and resistant to dirtHigh contact pressureNo damage to the component by the screw-in toolExcellent for painted headsShield sealDurableUV-stableExcellent adaptation to corrugated profiles

Ultraslim TV wall mount Basic FIXED (XL), black - The perfect solution for large televisions from 43 to 100 inches Are you looking for a robust and ultra-flat TV wall mount for your large TV? The Ultraslim Basic FIXED (XL) TV wall mount in black is the ideal choice for TVs from 43 to 100 inches (109 to 254 cm) and offers an impressive load capacity of up to 75 kg. Thanks to the extremely flat design with a wall clearance of only 9.5 mm, your TV is almost flush with the wall, giving it an elegant and modern appearance. Special features of the Ultraslim TV wall mount Basic FIXED (XL): Ultra-flat design: with a wall clearance of just 9.5 mm, the TV is perfectly integrated into the room visually without appearing bulky. High load capacity: The mount supports large and heavy TV sets up to 75 kg and is ideal for screens up to 100 inches (254 cm). Simple snap-on installation: The mount can be attached quickly and easily. Easy handling thanks to practical hanging brackets that can be moved sideways. Integrated spirit level and VESA compatibility: The crossbar is equipped with VESA®-compatible distance markings and a built-in spirit level, which facilitates precise installation. Compatibility with curved and flat screen TVs: The wall mount is suitable for popular TV brands such as Samsung (QLED and LED), Sony, Philips and LG. Supported screen sizes include 50 inch, 55 inch, 58 inch, 65 inch, 75 inch and 85 inch. Flexible cable accessibility: An optional support between the TV and wall creates space to conveniently connect or reconnect cables. VESA® standards: Supports VESA® dimensions 200x200 mm to 800x600 mm, providing flexibility in the choice of TV. This TV wall mount combines stability and design and is the perfect choice for mounting your TV safely and stylishly. Ideal for anyone who values modern design and high-quality workmanship. Discover the Ultraslim TV wall mount Basic FIXED (XL) and enjoy the best possible TV experience in your home! Technical details: Mount type: TV Fixed Recommended screen size: XL (109-254cm / 43-100'') Screen size: 109 - 254 cm Max. load: 75 kg Wall distance: 9.5 - 9.5 mm max. hole spacing (VESA): 800x600 mm VESA (FDMI): 200 x 200 mm, 300 x 200 mm, 400 x 200 mm, 300 x 300 mm, 400 x 300 mm, 400 x 400 mm, 600 x 400 mm, 800 x 400 mm, 800 x 600 mm Colour: black Material: Aluminium Width: 930 mm Height: 250 mm Depth: 9.5 mm Scope of delivery Mounting material: plugs, screws Operating instructions

DSH-2-A distance set, hexagon head with pressed-on washer, 6.0 x 90 (39 - 43) mm, partial thread (L1), SW 8, E19+SD24, stainless steel A2/plastic, bare, anti-friction coating, ETA-11/0106, 100 pcs.DescriptionDSH-2-A distance set - the complete packageBENEFITS:DRIBO® drilling segment for reducing the splitting effect in wood.SIT® drive ensures stable screwing without wobbling.PRODUCT FEATURES:External hexGreat power transmissionSIT®Fast drive connectionWobble-free screwingMaximum power transmission without the risk of strippingProcessing with standard TX bit possibleFlat round headLarge, flat contact surfaceHigh contact pressurePerfect fit and looks goodHexagon head with pressed-on diskGreat power transmissionRobust and resistant to dirtHigh contact pressureNo damage to the component by the screw-in toolExcellent for painted headsShield sealDurableUV-stableExcellent adaptation to corrugated profiles

With internal thread

With internal and external thread

Caravan FIXED (M) TV wall mount for 23 to 42 inches (58 - 107 cm) with 30 kg- Ultra-flat design for mobile entertainment at a small distance of 18 mm With the Caravan FIXED (M) TV wall mount from GOOBAY, you can transform your motorhome or caravan into a compact home cinema. This mount is the perfect solution for anyone who wants to watch TV while travelling in a space-saving way without compromising on comfort and safety. Highlights of the Caravan FIXED (M) TV wall mount: Compact compatibility Designed for TVs from 23 to 42 inches (58 - 107 cm) and weighing up to 30 kg, this mount offers reliable support even for heavier models. It is compatible with common VESA standards (50x50 mm, 75x75 mm, 100x100 mm) and fits well-known brands such as Samsung, Sony, Philips and LG. Ultra-flat design With a wall clearance of just 18 mm, the mount ensures space-saving installation. Ideal for tight spaces in motorhomes or caravans without compromising on aesthetics. Secure hold while driving The mount is equipped with a locking mechanism and an anti-vibration joint that holds the TV firmly and securely in place. This keeps your screen stable and vibration-free even on bumpy roads. Easy installation Installation is a two-step process: First, the TV is screwed to the mounting plate, then this is slid over the previously attached wall rail. Thanks to the user-friendly design, installation is quick and uncomplicated. Technical details: Bracket type: TV Fixed fixed mountable Screen size: M (58-107 cm / 23-42'') Width: 26.5 cm Height: 22 cm Depth: 1.8 cm Scope of delivery TV wall mount Operating instructions Mounting material

With internal thread

Contactless voltage tester pen, 12 to 1000 V AC, with laser distance measuring device.It includes a laser distance measuring device over 20 metres that can count in metres, inches in decimal numbers, inches in fractions, feet in decimal numbers and feet in fractionsHigh-visibility reverse contrast display for improved visibility in low light conditionsClass II, 630 to 670 nm, max. power Easy-to-use, intuitive user interface - simple to switch between laser distance measurement and voltage detection with a single buttonSimultaneous visual and audible voltage indication when AC voltage is detectedThe acoustic voltage detector beeps at a higher frequency, the higher the voltage or the closer the device is to a voltage sourceAutomatic shut-off saves the battery and extends battery lifeTechnical data:Frequency: 50 - 500 HzVoltage: 12 - 1000 V ACLaser: class II, 630 nm to 670 nm, max. Standard: CAT IV (1000 V)IP code: IP40Batteries: 2 x AAA (included)Fall protection: 2 m

With internal and external thread

With internal thread

With internal thread