45 products were found matching your search for division in 1 shops:

Comb busbar, Acti9, 1-pole, can be cut to size, 12 division units, nominal current 100 A, nominal voltage 415 V AC, insulation voltage (Ui) 500 V, RAL 7016 colour, complies with IEC 60947-7-1 and IEC 61439-2 standards.

JointPlay-free, wear-free and dirt-resistant joint with spring rod for uniform high voltage. Useful 90° detent of all jointsAccuracyCE conformity, EU standard accuracy class III.DivisionDeep-embossed, black divisions in 1-mm increments, red-embossed characters for the tensMaterialFibreglass-reinforced polyamide is score-, scratch- and especially bend-proof, chemical-resistant and does not swell if it comes in contact with water

JointPlay-free, wear-free and dirt-resistant joint with spring rod for uniform high voltage. Firm 90° and 180° locking of all jointsAccuracyCE conformity, EU standard accuracy class II.DivisionRed/black version: Deep-embossed, black divisions in 1-mm increments, red-embossed characters for the tens Grey/white version: Deep-embossed, black divisions in 1-mm increments, red-embossed characters for the tensMaterialComposite construction: Two cover layers made of longitudinal glass fibres absorb bending forces, therefore ensuring a higher rigidity than in wooden meters. Does not swell if it comes into contact with water, chemical resistantExtraDouble-sided reading with scale in reverse (recto verso). Captive metal ends at each end

• Wheel adjustment along scale with metric and inch divisions• Nickel-plated for corrosion protection.• Measurement range: 125 mm• Total length: 180 mm

Dividers with replaceable tabs. With different label inserts (blank and pre-printed). Material: PP filmTabs: with label insertsDivision: 10-pieceColour: greyDimensions (H x W): 297 x 215/230 mm

Anodised aluminium version with a strong plastic handle - light, easy to cleanMetric divisionIdeal for cutting, measuring and markingWith handleLength: 1 metre

Marking method: thermal transferImprint division: three fieldsImprint: not printedDelivery form: on rollDelivery format: 750 labels per roll, 1 lengthLabel surface: 40 mmMethod of attachment: gluingPrinting device: Wago smart printer (thermal transfer printer)

Marking method: thermal transferImprint division: two fieldsImprint: not printedDelivery form: on rollDelivery format: 750 labels per roll, 1 lengthLabel surface: 40 mmMethod of attachment: gluingPrinting device: Wago smart printer (thermal transfer printer)

High-voltage probe for multimeters,Max. input voltage 40 kV DC, 28 kV ACrms 40 kV AC peak – up to 300 HzDivision: x1000R: 1000 MOhmC: 1 pFTemperature coefficient: less than 200 ppm/CThe input impedance of the connectedmultimeter must not be less than 10 MOhm.Cable length: 1 m with 4 mm banana safetyplug.

Comfortable rotary trimmers for professional useSturdy metal table with non-slip rubber feet for high stabilityHandy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpieceDouble guide rod for an absolutely precise cutSelf-sharpening steel round blade in an enclosed safety cutting head, ground and hardenedSteel lower blade, ground and hardenedHigh-quality blades made of hardened steel for long-lasting cutting qualityRound blade in an enclosed, ergonomic plastic headAutomatic clamp on the cutting edge quickly fixes the material in placeTwo angle systemsAdjustable back stop for quick format findingRear stands for space-saving, standing storageCutting length: 720 mmCutting depth: 2.0 mmCutting speed A4 80 g/m2: 20 sheetsTable size: 940 x 395 mm

Upper and lower blades made of high-quality steel.Scales with cm divisions at two angles.GS-tested.Cutting length: 32 cmCutting depth: 0.8 mmPanel size: 420x175mm

Acti9 iPRD C40r modular surge arrester, type 2+3, in a compact design - only 2 division units wide. Max. line-side overcurrent protection: 100 A gG. Remote signalling contact. Optical function/defect indicator for the arrester (green = OK/red = device defective). Suitable for TN-S and TT grids. U0 nominal voltage: 230 V AC (50/60 Hz). Uc maximum continuous voltage: 255 V AC (N-PE)/275 V AC (L-N). In nominal discharge current: 20 kA (L-N)/(N-PE). Imax maximum discharge current: 40 kA (L-N)/(N-PE). Uoc no-load voltage: 6 kV (L-N/N-PE). Up protection level: 1.5 kV (type 2+3) for (L-N/N-PE). Up protection level: 1.0 kV (type 3) for (L-N/N-PE). DIN rail mounting. Dimensions: (W) 36 mm x (H) 99 mm x (D) 70 mm. Weight: 262 g. Integrated IP20 degree of protection. Operating temperature: -40 to +85°C Complies with IEC 61643-11:2011, EN 61643-11:2012+A11:2018.

Surge arrester, type 2, iPF K 40, 3-pole + N. Imax 40 kA. In 15 kA. Network type: TT&TN-S. Up=1.5 kV. Ue 230/400 V AC (+/- 10%). Status indicator for the operating status on the front. Width: four division units. Complies with IEC 61643-11:2011.

Comfortable rotary trimmers for professional useSturdy metal table with non-slip rubber feet for high stabilityHandy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpieceDouble guide rod for an absolutely precise cutSelf-sharpening steel round blade in an enclosed safety cutting head, ground and hardenedSteel lower blade, ground and hardenedRound blade in an enclosed, ergonomic plastic headAutomatic clamp on the cutting edge quickly fixes the material in placeTwo angle systemsAdjustable back stop for quick format findingRear stands for space-saving, standing storageCutting length: 510 mmCutting depth: 2.0 mmCutting speed A4 80 g/m2: 20 sheetsTable size: 730 x 395 mm

New FI/LS switches save 50 percent of space in the electrical distribution boardThe new Siemens 5SV1 RCDs combine residual current and overload protection in a single division unit (TE) for the first time. The compact devices protect people from dangerous electric shocks and at the same time prevent over-current damage to cables as well as the failure of electrical systems and consumers in buildings, infrastructure and industry. In the event of a fault, they reliably and safely disconnect the respective circuit from the mains supply. Compared to conventional devices, the 5SV1 RCDs require only half the space. This means that more protection devices can be installed in one distribution board and new protection functions can be added to existing installations easily and in a space-saving manner. The protective devices can also be connected to a 5SM6 fire protection switch block and thus offer personal, line and preventive fire protection in just two division units (TEs).

New FI/LS switches save 50 percent of space in the electrical distribution boardThe new Siemens 5SV1 RCDs combine residual current and overload protection in a single division unit (TE) for the first time. The compact devices protect people from dangerous electric shocks and at the same time prevent over-current damage to cables as well as the failure of electrical systems and consumers in buildings, infrastructure and industry. In the event of a fault, they reliably and safely disconnect the respective circuit from the mains supply. Compared to conventional devices, the 5SV1 RCDs require only half the space. This means that more protection devices can be installed in one distribution board and new protection functions can be added to existing installations easily and in a space-saving manner. The protective devices can also be connected to a fire protection switch block 5SM6 and thus offer personal, line and preventive fire protection in just two division units (TEs).

The METRIX DOX 2000B series oscilloscopes are easy to use, compact and their space-saving, shallow depth housing is ideally suited for laboratory applications.The instruments feature a large screen with 16 horizontal divisions in full screen display. Image display can be customized: normal or afterglow mode, YT or XY display, adjustment of colors, screen grid, brightness, contrast, etc. All knobs and illuminated keys for operation are located on the front panel.Its handle makes the DOX 2070B oscilloscope easy to carry, and the anti-slip feet provide stability.Excellent leads and many acquisition and analysis functions:Signal acquisition as well as signal analysis is performed at three levels: real-time or time equivalent mode (ETM). The memory depth is 32 kPoints and a USB stick can be used to increase the memory capacity to extend analyses. Vertical sensitivity is divided into 12 ranges from 2 mV/div to 10 V/div, and the time base ranges from 5 ns/div to 50 s/div. Advanced functions are available, such as simple MATH functions +/-/x/÷ and a real-time FFT function with simultaneous display of signal waveforms.The PASS/FAIL function with respect to a given envelope is also practical.With the accompanying software EASYSCOPE one can operate the instrument, perform tests, initiate screen copies and download signal files.Technical data:2 channels, 70 MHz - time base from 2.5 ns/div to 50 s/div + adjustable digital filtersSampling: Singleshot: 500 MS/s (2 channels)/ 1 Gs/s (1 channel) / Repeat mode: 50 GS/sLCD color screen, 7 inch WVGA, resolution 800x480Operator menus in 5 languages + on-screen context help in FR/ENMeasurement acquisition in 2 channels + 1 external trigger channel and complex trigger functionsVertical resolution: 8 bit32 automatic measurementsMeasurement cursors: manual, tracking and automaticNetworking as USB device and via ETHERNET RJ45 for connection to a PCIEC 61010-1 / 300 V CAT II

Entry-level compact cutter for hobbiesSturdy metal table with non-slip rubber feet for a secure standHandy format lines with mm divisions along the cutting edge of the panel simplify alignment of materialsSelf-sharpening steel round blade in closed safety cutting head, groundSteel lower bladeRound blade in closed plastic headPress bar with marking aidsAutomatic clamp on the cutting edge quickly fixes the material in placeScales with mm divisions at two angles for precise 90° cutsEasy to change cutter head

Oscilloscope probe, passive voltage probeFeaturesDivision factor: 10:1Bandwidth: 500 MHzVoltage: 600 VppCategory: 300 V, CAT IIThe oscilloscope used must have an input impedance of 1 MOhm. The tool must have a warm-up time of at least 20 minutes.

Active differential probe for medium voltages.Bandwidth: 30 MHzDivision factor: x20/x200Accuracy: ±2%.Rise time: 14nsSafety standard: IEC1010-031:2015 CAT IIIConnect to grounded oscilloscopes only! Input voltage:Differential mode: ±140V @ x20 / ±1400V @ x200Common mode: ±140V @ x20 / ±1400V @ x200Maximum input voltage: 1000V CAT IIIIncluded accessories:2x test probes, hook shape (red + black)1x USB cable, 1 m