781 products were found matching your search for fischer in 1 shops:

the fischer DuoBlade is the latest member of the highly decorated DUO-Line and consists of several components for the best possible performance. The self-drilling drill tip enables a clean and effective drilling process. The plug is screwed flush into the plasterboard in the plug-in mounting with a battery screwdriver or screwdriver. the fischer DuoBlade is matched to wood, sheet metal and chipboard screws of 4 to 5 mm thickness as well as different hooks and eyelets. This makes it universally suitable, for example, for securing smoke detectors, curtain rods and blinds safely and quickly. The DuoBlade is placed in the gypsum board with a conventional PZ 2 drive. No special set device is required.Top FeaturesSelf-drilling dowels for easy and quick assembly in gypsum boardHigh torque for an optimum setting feelingNo turning by sheep trippesUse of commercially available hooks, screws and eyeletsCommon cross-slot tool holder (PZ 2) for easy mountingTechnical DataDowel length l 44 [mm]Min Drill hole depth for pre-plug mounting H1 50 [mm]Min Thickness up to the first supporting layer t 50 [mm]Min Screw-in depth Le,min 28 [mm]Anchoring depth hef 9.5 - 25 [mm]Dowel length without drill tip l1 29 [mm]Quantity 50 [Unit(s)]

DuoXpand 10 x 80 FUS

Universal dowels FU 8 x 50

DuoXpand 10 x 100 T

The FIXtainer DUOPOWER and screw contain the new performance class — the fischer DUOPOWER in three sizes: 60 DUOPOWER 6 x 30, 30 DUOPOWER 8 x 40 and 15 DUOPOWER 10 x 50 plus the following matching screws: 60 4.5x40 screws, 30 5.0x60 screws and 15 7.0x69 screws (210 parts).

The Fischer DUOTEC nylon tilting dowels for high tensile and transverse loads through 2 components. Easy installation with a small hole diameter of 10 mm and short tilting element even in narrow and insulated cavities. Simple pre-assembly, the dowels do not fall into the drill hole even without a screw. No cutting and thus weakening of the gypsum board. The tilting element automatically folds up behind the plate and gives it its load-bearing capacity. Thanks to the flexible screw holder made of stainless steel, the tilt plug can be used with wood and chipboard screws or metric hook and threaded rods with lock nut. In the case of drill hole hits in solid materials, it works like a spreading dowels. The supplied screw with Panhead is optimally matched to the Fischer DUOTEC tilting dowels. This guarantees perfect grip.Top FeaturesCombination of two material components for more performanceWith matching screw with PanheadCollar sleeve strengthens the drill hole and enables significantly higher transverse loadsCurved handle allows you to touch obstacles before mountingTechnical DataDrill nominal diameter d0 10 [mm]Min Panel thickness dp 9.5 [mm]Max. Panel thickness dp 55 [mm]Min Cavity depth a 40 [mm]Screw length ls 60 [mm]Min Drill hole depth H1 65 [mm]Dowel length l 50 [mm]Max. Thickness of attachment part t fix 27 [mm]Contents 10 x DUOTEC 10,10 x panhead screw 5.0 x 60 Contents 10 x DUOTEC 10,10 x panhead screw 5.0 x 60

The fischer DUOPOWER provides excellent hold characteristics by means of two components:The grey component made from high-quality nylon automatically activates the optimum operating principle (expanding, folding) depending on the material for the best hold The expansion wing of the red component ensures secure expansion and provides additional support to the grey component Simply screw in the screw and firmly tug to secure. Do not overtighten the screw. The moulded edge on the plug head prevents the plug from slipping into the borehole. The DUOPOWER is the no. 1 choice when it comes to securing items such as skirting boards, cable channels, pictures, decorations, soap dishes and toilet paper holders.

Universal dowels UX 6 x 50 (100)

FISCHER S dowelMade of grey nylon for secure mounting, suitable for chipboard screws, dowel neck with no outward expansion force prevents plaster and fleece from chipping.Size: 10 mmContent: 50Colour: grey

the fischer DUOPOWER offers very good holding values thanks to its 2 components: The gray component made of high-quality nylon automatically activates the optimal operating principle (spreading, flaps, knots) depending on the building material for best support. The expansion wings of the red component support the safe spreading and provide additional safety to the gray component. Simply screw in the screw and ''pull'' correctly at the end. Do not overtighten the screw. The edge shaped on the dowels head prevents the dowels from sliding into the drill hole. The supplied screws are optimally matched to the fischer expansion nozzle DUOPOWER.Top FeaturesCombination of two material components for more performanceSafe functions for full (spreading) and hole and plate components (flaps/knots) Simple installation: Narrow dowel edge prevents the sliding down into the drill holeThe best possible feedback from the dowels - you can feel that the dowels are perfectly seatedWith a suitable screw for a perfect gripTechnical DataDrill nominal diameter d0 10 [mm]Min Drill hole depth H1 112 [mm]Dowel length l 80 [mm]Min Screw-in depth Le,min 87 [mm]Chipboard/wood screws ds 7 x 107 [mm]Drive SW 13 Quantity 10 [Unit(s)]

Universal dowels UX 8 x 50 (100)

The fischer MASTER BOX made of high-quality and impact-resistant plastic is ideal for workshops and construction sites and offers optimal value for money. The practical box of fasteners contains selected assortments of wall plugs, screws and hooks for the most common applications and building materials. The components are perfectly co-ordinated to guarantee a secure mounting solution every time. The transparent cover and separate compartments enable you to see the box contents at a glance. This saves time and ensures that you can easily choose the most suitable mounting component. The fischer MASTER BOX can be reused.Top featuresSelf-drilling plasterboard plug for quick and easy mounting jobsContents 35 x DUOBLADE, 30x screw SZ 4.5 x 40 ZPF,6x angled hooks 4.2 x 46, 6x round hooks 4.0 x 46 Quantity 35 [unit(s)]

Universal dowels FU 6 x 35

The Fischer DUOTEC nylon tilting dowels for high tensile and transverse loads through 2 components. Easy installation with a small hole diameter of 10 mm and short tilting element even in narrow and insulated cavities. Simple pre-assembly, the dowels do not fall into the drill hole even without a screw. No cutting and thus weakening of the gypsum board. The tilting element automatically folds up behind the plate and gives it its load-bearing capacity. Thanks to the flexible screw holder made of stainless steel, the tilt plug can be used with wood and chipboard screws or metric hook and threaded rods with lock nut. In the case of drill hole hits in solid materials, it works like a spreading dowels.Top FeaturesCombination of two material components for more performanceCollar sleeve strengthens the drill hole and enables significantly higher transverse loadsCurved handle allows you to touch obstacles before mountingTechnical DataDrill nominal diameter d0 12 [mm]Min Panel thickness dp 12 [mm]Max. Panel thickness dp 55 [mm]Min Cavity depth a 50 [mm]Screw diameter ds 5.0 - 6.0 / M6 [mm]Min Drill hole depth H1 ls - tfix + 10 [mm]Min Screw length ls tfix + 65 [mm]Dowel length l 60 [mm]Max. Thickness of attachment t fix ls - 65 [mm]Quantity 10 [Unit(s)]

FISCHER S dowelMade of grey nylon for secure mounting, suitable for chipboard screws, dowel neck with no outward expansion force prevents plaster and fleece from chipping.Size: 8 mmContent: 100Colour: grey

the fischer DuoBlade is the latest member of the highly decorated DUO-Line and consists of several components for the best possible performance. The self-drilling drill tip enables a clean and effective drilling process. The plug is screwed flush into the plasterboard in the plug-in mounting with a battery screwdriver or screwdriver. the fischer DuoBlade is matched to wood, sheet metal and chipboard screws of 4 to 5 mm thickness as well as different hooks and eyelets. This makes it universally suitable, for example, for securing smoke detectors, curtain rods and blinds safely and quickly. The DuoBlade is placed in the gypsum board with a conventional PZ 2 drive. No special set device is required.Top FeaturesSelf-drilling dowels for easy and quick assembly in gypsum boardHigh torque for an optimum setting feelingNo turning by sheep trippesUse of commercially available hooks, screws and eyeletsCommon cross-slot tool holder (PZ 2) for easy mountingTechnical DataDowel length l 44 [mm]Min Drill hole depth for pre-plug mounting H1 50 [mm]Min Thickness up to the first supporting layer t 50 [mm]Min Screw-in depth Le,min 28 [mm]Anchoring depth hef 9.5 - 25 [mm]Dowel length without drill tip l1 29 [mm]Contents 40 x DUOBLADE

DuoXpand 8 x 100 FUS

DuoXpand 10 x 140 FUS

Foreman's box SX + screwsRange of dowels and screws for solid and perforated building materials.With the strong Fischer SX dowels: the specialist for concrete, solid and perforated building materials.50x SX 6 x 3030x SX 8 x 4050x screw 4.5 x 4030x screw 5 x 60

DuoXpand 10 x 80 T R