12269 products were found matching your search for function in 4 shops:

This 9-function garden spray gun is ideal for a wide variety of purposes around the home and garden. With the ABS and TPR material, the garden hose gun features lightweight construction and has a comfort grip handle. The water can be turned on and off using the trigger handle. The garden hose spray

838 RA S bit-holding screwdriver with ratchet function, 1/4'', 1/4'' x 102 mmExtremely small bit-holding screwdriver with intuitive ratchet function. The ratchet mechanism with fine toothing (36 teeth/return angle 10°) integrated in the handle simplifies and speeds up screwdriving work without the need for tedious repositioning. The ''twirling'' motion speeds upwork. The ratchet mechanism is fully integrated in the handle and ensures that work is very manageable and effortless.Ergonomic switching to clockwise/counterclockwise or 0 position. Kraftform Plus handle for ergonomic work, preventing blisters and calluses. Magnetic bit holder for bits with 1/4'' hexagon drive.Extremely small bit-holding screwdriver for bits with 1/4'' hexagon driveRatchet mechanism integrated in the handleThe integrated ratchet with fine toothing makes work faster and saferHigh working speed: The ratchet mechanism can also be used to ''twirl'' the screwsErgonomic, intuitive switching to clockwise/counterclockwise or 0 positionStrong permanent magnet in the bit holder holds the bits securelyUniversal holder for holding bits with 1/4'' hexagon driveMulti-component Kraftform handle for fast, ergonomic screwdriving

Warranty: 2 years Fitting Position: Right (driver&:#39:s side) Bulb Type: Light bulb Number of light functions: 5 Dimensions: 19 x 10.5 x 6.1 cm Tension: 12V application: taillight

Multifunction electrician's pliersClever stripping: large capacity range, sharp stripping profiles and intuitive positioningInnovative cutting geometry: easier cutting, especially of flat cablesHybrid design: as flat as a needle-nose pliers, as wide as a combination pliers for high stability with good accessibilityPrecisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine stranded conductors from 0.5 - 4 mm²Accurate positioning of the conductor using the positioning ridgesEasy cutting of multi-core copper and aluminium cables up to Ø 15 mm (1/2'')Wide, cross-toothed gripping surfaces for twisting wiresMilled groove for secure holding and pulling of small work pieces such as nailsSingle-sided convex gripping surface for secure gripping of flat material and gripping hole for gripping of round materialOuter edge for deburring empty pipesTechnical attributesPliers: black atramentisedHead: polishedHandles with multi-component sleevesWeight: 296 gDimensions: 200 x 52 x 21 mm

Application: For 1/4'' square socket spanner inserts and 1/4'' connecting parts with square drive, with ball lock mechanismDesign: Ratchet integrated in the handle with fine toothing (80 teeth, return angle 4.5°) and clockwise/counterclockwise switch lever, quick-release sleeveHandle: T-form, two-component, hanging hole

Multifunction electrician's pliersClever stripping: large capacity range, sharp stripping profiles and intuitive positioningInnovative cutting geometry: easier cutting, especially of flat cablesHybrid design: as flat as a needle-nose pliers, as wide as a combination pliers for high stability with good accessibilityPrecisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine stranded conductors from 0.5 - 4 mm²Accurate positioning of the conductor using the positioning ridgesEasy cutting of multi-core copper and aluminium cables up to Ø 15 mm (1/2'')Wide, cross-toothed gripping surfaces for twisting wiresMilled groove for secure holding and pulling of small work pieces such as nailsSingle-sided convex gripping surface for secure gripping of flat material and gripping hole for gripping of round materialOuter edge for deburring empty pipesTechnical attributesPliers: black atramentisedHead: polishedHandles: plastic coatedWeight: 266 gDimensions: 200 x 46 x 14 mm

The Multifunctional Handgrip M from Leica attaches to the base plate of the Leica M Digital Rangefinder and provides a secure and stable grip for one-handed shooting or when shooting with larger lenses, but it also offers a range of integrated camera functions. For example, this handgrip provides a dedicated SCA flash terminal for attaching a flash if the camera's hot shoe is occupied with a viewfinder or other accessory. The grip's hot shoe can communicate with the camera just as the camera's own hot shoe. In addition, the hand grip contains a socket for an external power supply, a DIN/ISO-X sync socket for studio flash systems and an integrated USB port to connect directly to a computer for full remote control (with the Leica Image Shuttle software) and direct image transfer.

Multifunction electrician's pliersClever stripping: large capacity range, sharp stripping profiles and intuitive positioningInnovative cutting geometry: easier cutting, especially of flat cablesHybrid design: as flat as a needle-nose pliers, as wide as a combination pliers for high stability with good accessibilityPrecisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine stranded conductors from 0.5 - 4 mm²Accurate positioning of the conductor using the positioning ridgesEasy cutting of multi-core copper and aluminium cables up to Ø 15 mm (1/2'')Wide, cross-toothed gripping surfaces for twisting wiresMilled groove for secure holding and pulling of small work pieces such as nailsSingle-sided convex gripping surface for secure gripping of flat material and gripping hole for gripping of round materialOuter edge for deburring empty pipesTechnical attributesPliers: chrome-platedHead: polishedHandles insulated with multi-component sleeves, VDE-testedWeight: 296 gDimensions: 200 x 60 x 28 mmStandard: DIN EN 60900, IEC 60900

• For cutting copper and aluminium cables, single and multi-wire• Not suitable for steel wire and hard-drawn copper conductors• Hardened precision-ground blades• Cuts smoothly and cleanly without crushing• Easy cutting with one-handed use• Clamping protection prevents crushing injury• Adjustable screwed joint, self-locking• Special tool steel in special quality, forged, oil-hardened• Model: multi-function tool for working on NYM cabling from 3 x 1.5 mm² to 5 x 2.5 mm² (cutting, stripping, unsheathing)• Universal stripping point for both solid conductor cross-sections• Secure centring of the cable in the stripping point owing to V-shaped cutting edge geometry Burnished toolPlastic-coated handlesCutting value of copper cables, multi-strand (diameter) 12 mm dia.Cutting value of copper cables, multi-strand 35 mm²AWG 1/0Stripping values 1.5 - 2.5 mm²Length: 165 mmNet weight 220 g

This push drain with overflow function has a simple and practical structure and is meant to be the best choice for your bathroom. Made of zinc and brass, this drain pipe is durable and ensures a long service life. The size of the screw connection is 1¼ inches. When the sink is full, water can drain

This push drain with overflow function has a simple and practical structure and is meant to be the best choice for your bathroom. Made of zinc and brass, this drain pipe is durable and ensures a long service life. The size of the screw connection is 1¼ inches. When the sink is full, water can drain

This wall-hung toilet, with a unique and timeless design, upgrades every bathroom. It is designed to save space and provide you with a cleaner bathroom. This toilet with rimless flushing function has a particularly durable and easy to care ceramic surface simplifying cleaning. It also guarantees

The Multifunctional Handgrip M from Leica attaches to the base plate of the Leica M Digital Rangefinder and provides a secure and stable grip for one-handed shooting or when shooting with larger lenses, but it also offers a range of integrated camera functions. For example, this handgrip provides a dedicated SCA flash terminal for attaching a flash if the camera's hot shoe is occupied with a viewfinder or other accessory. The grip's hot shoe can communicate with the camera just as the camera's own hot shoe. In addition, the hand grip contains a socket for an external power supply, a DIN/ISO-X sync socket for studio flash systems and an integrated USB port to connect directly to a computer for full remote control (with the Leica Image Shuttle software) and direct image transfer.

Pluggable MaxLED 500 set with power supply and uncoated LED strip in warm white light colour for homely ambient and useful lighting. Easy installation thanks to adhesive backing and plug-in system. Strips can be shortened. Extendable with MaxLED strips up to 3 m. Other accessories available.

Pluggable MaxLED 1000 set with power supply and coated LED strip in daylight white light colour for decorative ambient and useful lighting. Easy installation thanks to adhesive backing and plug-in system. Strips can be shortened. Extendable with MaxLED strips up to 3.1 m. Other accessories available.

The 1-metre long base profile is a narrow profile for many applications. It can be equipped with YourLED or MaxLED strips and can be mounted on walls as well as on furniture. The aluminium provides a cooling effect of the LED strips while the satin diffuser ensures even light distribution.

The MaxLED system can be perfectly adapted or branched around the peculiarities of a room, such as corners or steps, using connectors. The corner connector enables the strips to be laid in both interior and exterior corners.

MaxLED strips are so powerful that they can easily be used as room lighting. They are real highlights especially in profiles. Warm white strips provide a cosy and relaxed room and workplace light. The basic set contain a suitable ballast in addition to the strip. Where required, it can be extended with additional strips, connectors and control units with remote control. When planning, please keep in mind the maximum length specified for the basic set, which must not be exceeded.

The digital LED strip set provides a wide range of lighting effects. The various colour combinations in dynamic rhythms can be controlled using the remote control included on delivery. Brightness can also be dimmed. To preserve the subtlety of the colours, a diode in white (W) provides a cosy warm white light at the touch of a button, meaning there is no need to mix a white tone out of red, green and blue (RGB).

MaxLED connecting cable to extend or bridge short distances up to five metres, to compensate for unevenness and for installation in tight radii or for change in the installation level. 5-pole for 24 V.