268 products were found matching your search for gedore in 1 shops:

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Overloading indicated by deformation *not standardised

Acc. to ISO 6787 Jaw set at 15° Polished head with lasered scale High torque 40-50 HRC Chrome-vanadium steel Chrome-plated

cross-head PH 1 2 cross-head Pozi PZ 1 2 2C reversible ratchet 1/4'', lever for reversing clockwise/anticlockwise direction, push-button release, fine-toothed, oval head, 2-component-handle for ease in handling, for sockets Extension 50 100 mm Socket 1/4'', hex, metric: short, as per DIN 3124, ISO 2725 Screwdriver bit socket 1/4'', for hex screws, with pressed-in, phosphated pin Screwdriver bit socket 1/4'': slotted, with pressed-in, phosphated pin Screwdriver bit socket 1/4'' PH: with pressed-in, phosphated pin Screwdriver bit socket 1/4'' PZ: with pressed-in, phosphated pin Screwdriver bit socket 1/4'' TX with pressed-in, phosphated pin Socket extension 1/4'' Universal joint 1/4'': Joint bolted on, design to DIN 3123 - C 6.3 Bit adaptor 1/4'', with in-hex and female square, for all bits and tools with 1/4'' external hex Chrome-vanadium steel, matt satin chrome-plated For hand-operated screw work Plastic case in GEDORE red Design Clamp-secured tools Metal hinges/fastener

Hammer-actuating screw remover for extracting stiff screws! Clockwise/anticlockwise rotating direction, reversible 1/2'' square drive in acc. with DIN 3120 - A 12,5, ISO 1174, with ball locking device for sockets 1/2'' adaptor, snap-on with hex recess drive in acc. with DIN 3126 - D 8 (5/16'') with retention spring for bits In robust sheet metal case

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

slotted 5.5 7 8 PH 1 2 PZ 1 2 Socket 3/8'', bi-hex, metric, short, as per DIN 3124, ISO 2725 Spark plug socket 16 21 mm Spark plug socket 3/8'' with pressed-in holding rubber and extra drive hex Size 19 Spark plug socket 3/8'' with pressed-in holding rubber and extra drive hex Size 22 Screwdriver bit socket 3/8'', for hex screws, with pressed-in, phosphated pin Screwdriver bit socket 3/8'', slotted, with pressed-in, phosphated pin Screwdriver bit socket 3/8'' PH with pressed-in, phosphated pin Screwdriver bit socket 3/8'' PZ with pressed-in, phosphated pin Screwdriver bit socket 3/8'' TX with pressed-in, phosphated pin Socket extension 3/8'' Convertor/slider 3/8'' x 1/2'' for driving sockets and screwdriver bit sockets Universal joint 3/8'', screwed-on joint , acc. to DIN 3123 - C 10 Reducer 3/8'' to 1/4'' Chrome-vanadium steel, matt satin chrome-plated For hand-operated applications Plastic case in GEDORE red Design Clamp-secured tools Metal hinges/fastener

The new GEDORE plastic ratchet case is for industry, the automotive field, do-it-yourselfers & hobby mechanics. It is fitted out with a black/blue plastic Check-Tool insert for the identification of any missing tools The droplet-like head of the reversible ratchets make this set ideal for the tightest of bolting positions 1/4'' and 1/2'' socket wrench hexagon set with all metric sizes from 4-32 mm and bit set for the most popular drives, such as slot, PH, PZ, TX XZN & in-hex The reversible ratchets features a dual material handle, lever change and press-button release for easy, rapid and safe working Depending on the size, the socket wrench sets can be extended in the drive depth to 375mm

In accordance with DIN 3113, ISO 3318 Ring offset to 15°, reversible for right and left hand operation 72 teeth Ratchet mechanism Return angle 5° Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In rugged plastic case

With lever ratchet Oval head Acc. to DIN 3122, ISO 3315 2-component-handle for easy transfer of force 2-component-handle for easy transfer of force For sockets, accessories etc. with square drive as per DIN 3120 - D 20, ISO 1174, with ball retention groove Chrome-vanadium steel

With internal hexagon drive as per DIN ISO 1173 With square drive as per DIN 3120 - C 6,3 (1/4'') or C 10 (3/8'')

With flat mouth

Hex recess drive for bits 1/4'' With powerful magnetic holder Bit holder with powerful magnet Elongated hole in the handle for hanging up Chrome-vanadium steel

Use: Controlled screw tightening from 40 to 200 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features: Adjustable torque wrench with square drive and integrated ratchet function Square drive with ratchet mechanism Torque is set by turning the handle The set value is fixed through the lock at the end of the handle Easy-to-read scale with magnifying glass for N·m, plus 1/10 scale for precision setting Tripping accuracy: +/-3 % tolerance of the set scale value Scope of delivery: Torque wrench with test certificate acc. to DIN EN ISO 6789 Operating instructions

Ring 15° offset from shaft Hexagon gap 30° offset, UD-section at 15° offset Sizes 8x10 to 12x14 mm with hexagon For applications involving hydraulic/brake lines GEDORE vanadium steel 31CrV3, chrome-plated * not standardised Hexagonal opening 30° offset, UD profile opening 15° offset

Water pump pliers 10'', 245 mm Combination plier 180 mm Telephone plier 160 mm Side cutter 160 mm In foam module

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to matt chrome Designed for universal use Top-grade industrial quality for the hardest of continuous use Jaw: ground precisely to exact nominal size for optimum contact areas Ring: 15° offset from shaft, with UD profile for gentle transmission of force

Surface chrome-plated with black tip With 2-component handle Hard component from PP, non-slip soft component from TPV Contents: slotted screwdriver 3 5.5 6.5 mm cross-head screwdriver PH 0 1 2 Elongated holes in the handle for hanging up

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking face and pein Double curved ash handle Paint-finished handle end improves the surface feel 360° clamping force of the tapered collar fixes the hammer head

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle join, high working safety, long service life, best price-performance ratio