124 products were found matching your search for homematic in 1 shops:

Homematic IP heating starter set Who hasn't done this before: turned up the heating in the evening so you can go into a warm bathroom in the morning. You would like to turn down all of the thermostats during the day, but that means cooled-down rooms. As a result, people often opt for a medium temperature, which leads to increased energy consumption in the long run. With Homematic IP, this is a thing of the past. The heating starter set not only makes living so much more comfortable, but also ensures energy savings of up to 30% at the same time. This is made possible by automatic, demand-based control of the respective room temperature via Homematic IP radiator thermostats. Two pieces are included in the set, which is completed by the Homematic IP access point. This establishes the connection to the free app, which is used for setup and control - even when on the move!

Offers reliable and exact metering of temperature, humidity, wind direction, wind velocity, onset of rain, rainfall volume, brightness (relative) as well as hours of sunshineThe Homematic IP Weather Sensor - pro is part of the Homematic IP smart home system and offers reliable and exact metering of the outside temperature, relative humidity, wind velocity, brightness and hours of sunshine. In addition, the weather sensor pro detects if and when there will be rain, meters the rainfall volume and detects the wind direction. The weather data is displayed and evaluated comfortably via the free Homematic IP app. The weather data can also be applied for triggering of different actions in the smart home. For example, shutters are raised in case of strong wind or awnings are extended automatically while the sun is shining. Also, automatic notification when rain begins to fall can be realised with the sensor. In connection with other Homematic IP devices, a wide range of other applications can be realised. Thanks to the independent battery supply as well as the proven and secure wireless technology, the weather station can be mounted also without having to lay any cables. The mounting material required as well as the stainless steel mast of approximately 1.6 meters are supplied.Collected weather data is displayed and evaluated via the free Homematic IP appMultiple applications in connection with other Homematic IP devices - e.g. moving shutters down in case of sunshine or retraction of awnings in case of rainFlexible application in outdoor areas thanks to radio communication and battery operationEasy to install with durable stainless steel mastCan be used with the Access Point in connection with the Homematic IP app (no recurring costs), the Homematic Central Control Unit CCU2 as well as with various partner solutions

Homematic IP Smart Home Window and Door Contact with MagnetReliably detects the opening or closing of windows or doors via a magnetic contactThe Homematic IP window and door contact is part of the Homematic IP smart home system and reliably monitors the opening and closing of windows/doors using a magnetic contact.In combination with a radiator thermostat, it reduces energy consumption in the home and alerts in case of unauthorized access via the free Homematic IP app - even on the go.It can be set up flexibly via the Homematic IP app (in conjunction with the Homematic IP Access Point) or via a browser-based interface (in conjunction with a CCU3 central controller). Alternatively, the smart window contact can also be operated without a control panel: The stand-alone operation (push-to-pair) allows direct teaching of up to eight radiator thermostats - basic (HmIP-eTRV-B) for automatic lowering of the room temperature during ventilation.Via the app, the window contact can be integrated into a comprehensive smart home system and thus additionally used for security applications, for example. The cloud solution enables flexible remote access at any time from any location. Those who prefer to know the data locally in the home network, but still want to benefit from the advantages of a smart home system, can resort to the setup via the CCU3 control center.Power is supplied by two LR03 batteries, which can power the sensor for up to four years. For secure mounting, both double-sided adhesive strips and suitable screws are supplied.Reliably detects the opening or closing of windows or doors via a magnetic contact.Stand-alone operation (push-to-pair) allows direct teaching of up to eight radiator thermostats - basic (HmIP-eTRV-B).Expandable to a comprehensive smart home system with the Homematic IP Access Point or a Homematic CCU3 central controller.In the smart home system, the sensor can be combined with a variety of Homematic IP devices, enabling functions such as triggering an alarm.Flexible mounting via supplied double-sided adhesive tape or with the help of screws.

Reliably recognizes the presence of people by detecting even smallest movements (e.g. hand movements on a keyboard)The Homematic IP Presence Sensor is part of the Homematic IP smart home system and reliably detects smallest movements in indoor rooms. After mounting the presence sensor to the ceiling, it is able to register even smallest movements (e.g. typing on a keyboard) in a radius of up to 3.5 m and a detection angle of approximately 105°. Larger movements are detected in a radius of up to 7 m. Apart from this, the integrated brightness sensor is able to detect changes in the brightness level. In this way, lights are switched on automatically if motion is detected. The presence sensor can also be used as sensitive sensor for alarm detection. To ensure the detection sensitivity also in case of increased room temperatures, the sensor automatically adapts to the respective conditions. The small sensor is mounted to the ceiling using the supplied screws and plugs. After installation, an integrated tamper contact reliably prevents from unintended changes of the presence sensor. As soon as the sensor unit is removed, a message is sent out via the Homematic IP app. Power is supplied by two LR6 batteries, offering power supply for the presence sensor of up to two years.The integrated brightness sensor detects also the light intensity for actions that are being triggered at twilight or night-time (switching on the lights if motion is detected, for example)In connection with other Homematic IP devices, e.g. an alarm can be triggered or the light can be switched onOptimum detection range of up to 7 m and detection angle of 105° (approx.)Automatic sensitivity adjustment in case of increased room temperatures (e.g. when using a floor heating) for precise motion detectionCompact design, making it ideal for indoor applicationsFlexible ceiling mounting using supplied screws and plugsImmediate information via the Homematic IP app about unauthorised removal or manipulation thanks to integrated tamper contactCan be used with the Home Control Access Point in connection with the Homematic IP app (no recurring costs), the Homematic Central Control Unit CCU2 as well as with various partner solutions

Universal switch actuator for switching circulator pumps, boilers, electric radiators and other consumers via two channelsIntelligently switching the heating system means that the heat supply can be controlled according to demand, resulting in the more efficient use of heating energy.The integrated time profile allows you to quickly and easy specify times periods in line with demand for hot water (e.g. every morning and evening).Can be used alongside radiator thermostats or underfloor heating actuators as a heat demand relay for controlling circulator pumps.Easy and flexible mounting using the screws provided.Operation requires a connection with one of the following solutions:Homematic IP Access Point with free smartphone app and free cloud serviceCCU2/CCU3 control panel with local WebUI user interfacePartner solutions from third-party providers

Homematic IP Smart Home Starter Set AlarmStarter set for monitoring and alarming for more security in your own four wallsThe Homematic IP Starter Set Alarm provides more security within your own four walls, for example to protect against break-ins.The Homematic IP Access Point connects the Homematic IP Cloud, which is located in Germany, in encrypted form to the Homematic IP products in the user's own home. This means that Homematic IP components can be controlled both locally within the home and remotely via smartphone. Since no personal data is requested during setup, the user remains anonymous despite the use of a cloud solution.The Homematic IP window and door contact reliably monitors doors and windows via an integrated infrared sensor. This signals the opening of the monitored window or door leaf and sends a signal to the Homematic IP alarm siren included in the scope of delivery. This beats burglars into flight with a sound pressure of up to 90 decibels. In addition to the loud siren, two bright LEDs provide additional attention. The alarm is also transmitted to the residents' smartphones via push message. The alarm behavior can be easily adjusted according to personal preferences in the app.Confirmation of the intrusion by motion detection can be made by the Homematic IP motion detector, which covers a detection range of up to 12 meters and a detection angle of approximately 105°. Thanks to radio communication and battery supply, it can be flexibly placed on walls, ceilings, in corners or on the dresser. The alarm is also triggered via the alarm siren and the free smartphone app.Direct connections between the individual devices ensure increased security: even if the access point is destroyed (e.g. by the burglar) or if there is no internet connection, the alarm siren will trigger reliably. All information is passed directly from the sensors to the siren - without a detour via the access point or the cloud. The communication between the devices is comprehensively encrypted. The alarm mode can be conveniently activated via voice assistants such as Amazon Alexa or Google Assistant. In combination with many other Homematic IP devices, the Starter Set Alarm can be expanded into a comprehensive smart home solution at any time.reliable monitoring and alarming for more security in your own four wallsthe access point connects the smartphone to the Homematic IP devices via the Homematic IP Cloudthe motion detector alerts to movements at a distance of up to 12 m and a detection angle of approx. 105°the window and door contact triggers an alarm when a window or door is openedthe alarm siren enables acoustic and optical signaling in case of alarmincreased security: even if the access point is destroyed, e.g. by burglars, or if there is no Internet connection, the alarm siren will be triggered reliably<...

Measures outdoor brightness (in lux)The Homatic IP light Sensor is part of the Homematic IP Smart Home System and measures the brightness in the outdoor area. The determined values can be displayed and evaluated via the free Homematic IP smartphone app. The Homematic IP light sensor offers a wide range of applications in conjunction with other Homematic IP devices, such as Roller shutter and blind actuators or switch sockets. The light sensor measures the light values in lux and passes the measured information to the associated Homatic IP devices, which react according to the previously defined configuration. For example, the awning can be extended in strong sunlight, or the facade light can be switched on at dusk while the shutters are shut down.Thanks to battery operation and wireless communication, the Homematic IP light sensor is ready for immediate use. Ideally, it is either mounted on the wall or placed at the desired location in the outdoor area. The required mounting material, such as dowels and screws, is included in the scope of delivery. The Homematic IP Access point in conjunction with the smartphone app, the Homematic Control Center CCU2 or a suitable partner solution is required for the operation of the Homematic IP light sensor.Display and evaluation of the determined brightness values via the Homatic IP appMultiple uses in conjunction with other Homematic IP devices (e.g. switching on light in the dark or shutting down shutters in the strong sunshine)Thanks to battery operation and wireless communication, it is ready for immediate useFlexible and easy wall mounting possible by supplied dowels and screws or use as a stand deviceFor operation, the Homematic IP Access point in conjunction with the Homematic IP App (no follow-up costs), the Homematic Center CCU2 or a suitable partner solution is required

Open the door at the touch of a buttonThe practical keyring remote control and the Homematic IP door lock drive are the ideal solution for a convenient and intelligent way to unlock, lock or open your door. The remote control replaces a conventional key and enablesone-touch access to a Smart home.

Homematic IP Smart Home window and door contact - concealed installation Reliably detects open or closed windows and doors via an integrated infrared light barrier - INVISIBLY MOUNTEDThe Homematic IP window and door contact for concealed installation unobtrusively monitors doors and windows within the Homematic IP smart home system. The 15 mm flat sensor is glued to the inside of the frame in just a few simple steps, where it reliably detects the respective state of the window with the help of a photoelectric sensor. Once installed, the window and door contact enables the automatic lowering of the room temperature during ventilation or also the triggering of the Homematic IP siren in the event of unauthorized access by third parties. A built-in sabotage contact reliably detects unwanted manipulation or disassembly of the sensor. The Homematic IP app also displays the respective status at any time. Two micro batteries supply the sensor with power for up to four years.Concealed installation in frames of plastic windows or doors and easy mounting with supplied adhesive stripswhen the window or door is closed, the device is not visible and therefore particularly inconspicuousfor installation a minimum distance of 15 mm between frame and sash is requiredduring ventilation the room temperature is automatically lowered in connection with the Homematic IP radiator thermostatif desired, an alarm can be triggered as soon as a window or door is opened, e.g. in combination with the Homematic IP sirenOpen windows and doors are displayed directly in the Homematic IP app - so the current status can be viewed at any time, even when on the roadthe built-in tamper contact informs via the app if the window and door contact is tampered withcan be operated with the access point in conjunction with the Homematic IP app (without follow-up costs), the Homematic CCU2 central control unit as well as with many partner solutionsScope of delivery:Homematic IP window and door contact - concealed installation.Double-sided adhesive strips (2x)Reflector sticker (for dark surfaces)1.5 V LR03/Micro/AAA battery (2x)Operating instructions

Homematic IP Smart Home radiator thermostat - basicAutomatic and convenient control of the room temperature by heating according to demandThe Homematic IP radiator thermostat - basic is part of the Homematic IP smart home system and actively helps to save energy. The smart controller replaces conventional radiator thermostats, allowing energy savings of up to 30 %.The thermostat is mounted on the radiator without interfering with the heating system and without tools. Power is supplied by two AA batteries, which can provide energy for about 2 years. The radiator thermostat is ready for immediate use thanks to a preset heating profile - this can be manually adjusted at any time if required. Individual temperature profiles with up to 13 changes are possible per day. In this way, Homematic IP only heats certain rooms when there is a real need.Setup can be done flexibly on the device itself, via the Homematic IP app (in conjunction with the Homematic IP Access Point) or via a browser-based interface (in conjunction with a CCU3 central controller). Via the app, the radiator thermostat can be integrated into a comprehensive smart home system. For example, the cloud solution allows the temperature to be set at any time from any location. Those who prefer to know the data locally in the home network, but still want to benefit from the advantages of a smart home system, can resort to the setup via the central CCU3.Stand-alone operation (push-to-pair):Manual operation and configuration possible directly on the device, e.g. setting the heating profile, vacation mode, temperature changes and triggering the boost functionDirect teach-in of up to eight window and door contacts with magnet (HmIP-SWDM) for automatic lowering of the room temperature during ventilationIn the Smart Home with the Homematic IP Access Point or the CCU3 central controller:Configuration and control via the free Homematic IP smartphone app or the local user interface WebUI.Combination with a wide range of Homematic IP devices for extended functionality

Homematic IP Smart Home Fenster- und Türkontakt – optisch, plusErkennt zuverlässig das Öffnen oder Schließen von Fenstern und Türen über eine integrierte Infrarot-LichtschrankeDer Homematic IP Fenster- und Türkontakt ist Teil des Homematic IP Smart-Home-Systems und überwacht zuverlässig eine Tür oder ein Fenster.Hierfür setzt der Fensterkontakt auf einen innovativen optischen Sensor. Dieser macht einen zusätzlichen Magnetkontakt überflüssig und reduziert so den Montageaufwand. Die eingebaute Infrarot-Lichtschranke erkennt sofort, ob das Fenster geöffnet oder geschlossen wird und gibt diese Information im System weiter. Die Bauform „plus“ ermöglicht einen wartungsarmen Betrieb durch die Aufnahme von zwei AAA-Batterien, welche für eine besonders lange Batterielebensdauer von typisch vier Jahren sorgen.Der Sensor übernimmt in Kombination mit anderen Homematic IP Geräten gleich mehrere Aufgaben. Zum einen sorgt er beim Lüften für das automatische Herunterregeln der Wärmezufuhr über einen Homematic IP Heizkörperthermostat. Zum anderen überwacht er zuverlässig den Zugang zu den eigenen vier Wänden. Wenn also bei aktiviertem Schutzmodus ein Fenster oder eine Tür geöffnet wird, löst der Fensterkontakt einen Alarm über die kostenlose Homematic IP App aus. So kann der Nutzer im Ernstfall sofort reagieren. Bei Einsatz einer Homematic IP Sirene ertönt zusätzlich ein lautes Signal, welches ungewünschte Eindringlinge in die Flucht schlagen kann.Die Montage erfolgt flexibel per doppelseitigem Klebestreifen oder Schrauben am Fenster-/Türrahmen.Wartungsarmer Betrieb durch zwei Micro-Batterien für eine besonders lange Batterielebensdauer von typisch 4 JahrenZeitgleich in verschiedenen Anwendungsbereichen (Raumklima und Sicherheit) einsetzbar:Während des Lüftens wird die Raumtemperatur in Verbindung mit dem Homematic IP Heizkörperthermostat automatisch abgesenktAuf Wunsch kann z. B. in Kombination mit der Homematic IP Sirene Alarm ausgelöst werden, sobald ein Fenster bzw. eine Tür geöffnet wirdGeöffnete Fenster und Türen werden direkt in der Homematic IP App angezeigt – so ist auch von unterwegs der aktuelle Status jederzeit einsehbarFlexible Montage am Fenster- oder Türrahmen durch mitgelieferte Klebestreifen oder SchraubenDer Betrieb erfordert die Anbindung an eine der folgenden Lösungen:Homematic IP Access Point mit kostenloser Smartphone-App und gebührenfreiem Cloud-ServiceZentrale CCU2/CCU3 mit lokaler Bedienoberfläche WebUIPartnerlösungen von Drittanbietern

Open the door to a Smart homeNever want to have to find your keys again? The intelligent door lock drive from Homematic IP means you'll never have to! You can unlock, lock and open doors conveniently and safely via a smartphone, remote control or voice control. The Homematic IP app keeps thean eye on the front door at all times.

Measures outdoor temperature and humidityThe Homematic IP temperature and humidity sensor is part of the Homematic IP Smart Home system and monitors the outside temperature and humidity. The compact sensor detects temperatures between minus 20 °C and plus 55 °C and the relative humidity between 0 and 99%. In combination with other Homematic IP devices, there are numerous practical applications. For example, the sensor can be used for ventilation or dehumidification controls, as a frost monitor for heating sensitive greenhouse plants and numerous other scenarios. In addition, the determined weather data is displayed and evaluated in the Homematic IP app. The power supply is provided by two LR6 batteries, which can supply the sensor with energy for a typical five-year period. The required mounting material is supplied.Display and evaluation of the determined weather data via the Homematic IP appWide range of applications in conjunction with other Homematic IP devices (e.g. for ventilation or dehumidification control)Thanks to battery operation and wireless communication, it is ready for immediate useFlexible and easy installation thanks to the supplied dowels and screwsAvailable in white (HmIP-STHO) and anthracite (HmIP-STHO-a)Can be operated with the access point in conjunction with the Homematic IP app (without additional costs), the Homematic headquarters CCU2 as well as with many partner solutions

Homematic IP Smart Home wall thermostat with switching output - for brand switches, 24 VIndividual control of 24 V actuators for underfloor heating via Triac output according to the defined heating profiles.The Homematic IP wall thermostat with switching output is part of the Homematic IP smart home system and silently controls 24 V floor heating actuators via triac output. The wall thermostat with switching output thus enables the simple upgrade of a conventional floor heating control to an intelligent control of the room temperature by replacing the previous bimetal controller. This increases living comfort and actively helps to save energy.The smart solution offers up to three individually adjustable heating profiles and another three freely adjustable cooling profiles, each with six heating phases as well as 13 switching times per day. The Homematic IP wall thermostat with switching output can be used to conveniently select the target temperature in 0.5 °C increments using the dial. The large illuminated display shows the set and actual temperature as well as the humidity. In addition, all values can also be read and set via the Homematic IP app.The wall thermostat is mounted in classic flush-mounted boxes, which makes it much easier to replace existing wall thermostats. The dimensions of the Homematic IP wall thermostat even allow integration into multiple frames from leading manufacturers. Easy upgrade of a conventional underfloor heating control to intelligently controlled regulation of the room climate via smartphone by replacing the existing wall thermostatsMeasurement and display of set and actual temperature as well as humidity on large illuminated displayUp to 6 individually adjustable heating profiles (3x heating, 3x cooling) with 6 heating phases each and 13 switching times per day for demand-based heatingManual setting of the target temperature (accurate to 0.5 °C) directly on the setting wheelSimple installation in existing flush-mounted box Integration in multiple frames or in frames from other manufacturers (Berker, Busch-Jaeger, ELSO, Gira, Merten, JUNG)Commissioning and configuration of floor heating possible directly at the wall thermostat (even without Homematic IP Access Point)Can be used with the Access Point in conjunction with the Homematic IP App (without follow-up costs).

Reliably detects people passing a door and is able to register the number of people as well as the passage directionThe Homematic IP Passage Sensor with Direction Recognition is part of the Homematic IP smart home system and reliably detects persons when passing a door or passageway The number of persons and passage direction is registered. The sensor is able to detect persons during day and night within a detection range of up to 4.5 meters. The detection angle is 66°. If the sensor is used in connection with other Homematic IP devices, various application scenarios can be realised. For example, the room light can automatically be switched on when entering the room and off when leaving the room. Furthermore, the sensor can be used for triggering of alarms. The device is mounted horizontally to the ground and can be positioned not only in the door frame, but also on different surfaces and locations in buildings. At a mounting height from 80 centimetres, the detection of pets will be avoided. An integrated tamper contact offers additional security. Two LR6 batteries offer power supply for the presence sensor of up to two years. The device is installed either using double-sided adhesive strips or with two little screws. The required mounting material is supplied.Optimised detection range of approximately 4.5 m and a detection angle of 66° – reliable detection also in the darkIn connection with other Homematic IP devices lights can be switched on when entering a room and they are switched off when leaving a room, depending on the predefined passage directionIn addition, the sensor can be used for triggering an alarmIdeal for application in the side part of the door frame thanks to battery operation and its compact designCan be flexibly mounted with supplied adhesive strips or screwsUnintended detection of pets can be avoided by a mounting hight of at least 80 cmWarning via the Homematic IP app about unauthorised removal or manipulation thanks to integrated tamper contactCan be used with the Access Point in connection with the Homematic IP app (no recurring costs), the Homematic Central Control Unit CCU2 as well as with various partner solutions

Homematic IP Smart Home Fenster- und Türkontakt – optischErkennt das Öffnen und Schließen von Fenstern und ermöglicht automatisches Absenken der HeizungDer Homematic IP Fenster- und Türkontakt ist Teil des Homematic IP Smart-Home-Systems und überwacht zuverlässig Türen und Fenster. Hierfür setzt der innovative Sensor nicht auf die sonst üblichen Magnetkontakte, sondern auf einen ausgeklügelten optischen Sensor. Hierdurch wird der sonst zusätzlich benötigte Magnet überflüssig, wodurch der Montageaufwand reduziert wird. Die eingebaute Infrarot-Lichtschranke überwacht die Tür oder das Fenster und erkennt so den geöffneten/geschlossenen Zustand.Im Homematic IP System übernimmt der kleine Sensor gleich mehrere Aufgaben. Zum Einen sorgt er beim Lüften für das automatische Herunterregeln der Wärmezufuhr, indem er dem Homematic IP Heizkörperthermostaten mitteilt, sobald ein Fenster oder auch eine Außentür geöffnet wird. Besonders praktisch ist hier die Möglichkeit, eine Meldeverzögerung für mehrmals täglich genutzte Türen zu definieren, um ein ständiges Öffnen und Schließen der Heizkörperventile zu vermeiden. Zum Anderen überwacht der Sensor bei Abwesenheit zuverlässig den Zugang zu den eigenen vier Wänden. Bei aktiviertem Alarmmodus kann im Falle einer unbefugten Fensteröffnung die Homematic IP Sirene aktiviert werden. Über die App wird zudem eine Warnmeldung in Form einer Push-Nachricht an den Nutzer abgesetzt. Er bekommt somit die Möglichkeit, zeitnah auf die Gefahrensituation zu reagieren.Der kleine, 30 Gramm leichte Sensor, arbeitet dabei so effektiv, dass er mit der Energie von einer AAA-Batterie rund zwei Jahre lang seinen Dienst verrichtet. Geht die Batteriekapazität zur Neige, meldet sich die Homematic IP App. Das geringe Sensorgewicht erlaubt eine zuverlässige Anbringung per doppelseitigem Klebeband. Dieses wird, zusammen mit einer zusätzlichen braunen Abdeckkappe und einer Reflektorfolie mitgeliefert. Sollte das Fenster- bzw. das Türmaterial eine Anbringung per Klebeband nicht zulassen, können die zwei mitgelieferten, winzigen Schräubchen zum Einsatz kommen.sorgt während des Lüftens für ein Absenken der Raumtemperatur z. B. in Verbindung mit dem Homematic IP Heizkörperthermostatintegrierte Infrarot-Lichtschranke erkennt das Öffnen und Schließen von Fensternflexible Montage durch mitgelieferte Klebestreifen oder Schraubenweiße und braune Gehäuse-Kappen für individuelle Anpassung an Fensterrahmen

Measures outdoor temperature and humidityThe Homematic IP temperature and humidity sensor is part of the Homematic IP Smart Home system and monitors the outside temperature and humidity. The compact sensor detects temperatures between minus 20 °C and plus 55 °C and the relative humidity between 0 and 99%. In combination with other Homematic IP devices, there are numerous practical applications. For example, the sensor can be used for ventilation or dehumidification controls, as a frost monitor for heating sensitive greenhouse plants and numerous other scenarios. In addition, the determined weather data is displayed and evaluated in the Homematic IP app. The power supply is provided by two LR6 batteries, which can supply the sensor with energy for a typical five-year period. The required mounting material is supplied.Display and evaluation of the determined weather data via the Homematic IP appWide range of applications in conjunction with other Homematic IP devices (e.g. for ventilation or dehumidification control)Thanks to battery operation and wireless communication, it is ready for immediate useFlexible and easy installation thanks to the supplied dowels and screwsAvailable in white (HmIP-STHO) and anthracite (HmIP-STHO-a)Can be operated with the access point in conjunction with the Homematic IP app (without additional costs), the Homematic headquarters CCU2 as well as with many partner solutions

EVO is the evolution in design and technology in the field of smart radiator thermostats and winner of the Red Dot Design Award [2021]. This smart radiator thermostat combines a modern and simple design with particularly precise and almost silent controls. Individual heating profiles and networking with window contacts can save up to 30% energy during heating.Metal nut for secure hold on the valveLED display of the set temperature on a rotatable displayParticularly low-noise precision drive for precise control of the temperatureRapid activation of the boost functionManual temperature adjustment by turning slightly to the left or right

Reliably detects humidity on different surfaces as well as a water level from 1.5 mm heightArising humidity and water are indicated via the integrated siren of the water sensor or, if available, via the Homematic IP Alarm Siren as well as the Homematic IP AppWith an integrated tilt sensor, unintended movement or manipulation of the water sensor is detected and indicated immediatelyFlexible adaptation to the installation site thanks to battery operation and spring-mounted measuring probesIndividual adjustment of triggering behaviour via the Homematic IP appFor operation, the Homematic IP Access Point in connection with the Homematic IP app (no recurring costs), the Homematic Central Control Unit CCU2 or an appropriate partner solution is required

The Homematic IP temperature and humidity sensor with LC display is part of the Homematic IP Smart Home system and reliably determines the room temperature and humidity. The user can freely choose whether the desired, the actual or alternatively the humidity should be shown on the display in alternation with the actual temperature. In addition, the sensor unit precisely regulates the room temperature in conjunction with one or more Homematic IP heat exchanger thermostats or Homematic IP floor heating actuators. Thanks to highly efficient radio transmission and battery supply, the sensor is immediately ready for use and can be placed almost anywhere. The 55er-frame size allows mounting in single and multiple frames of other manufacturers (Berker, ELSO, Gira, Merten, JUNG). The Homematic IP temperature and humidity sensor with display can be operated optionally with the access point in conjunction with the Homematic IP app, with the Homematic control center CCU2 as well as with many partner solutions.Measure indoor temperature and humidityControls the room temperature in conjunction with one or more Homematic IP radiator thermostats or Homematic IP floor heating actuatorsEspecially user-friendly and ready to use thanks to radio communicationFlexible and easy installation thanks to the supplied adhesive strips or screwsIntegration in multiple frames or in 55er frames of other manufacturers (Berker, ELSO, Gira, Merten, JUNG)Can be operated with the Home Control Access point in conjunction with the Homematic IP App, the Homematic Control Center CCU2 as well as with many partner solutions, such as ALEXA