10028 products were found matching your search for integrated in 4 shops:

Features Replacement Saber Integrated Mouthpiece and Chamber. This glass piece combines the mouthpiece and chamber into one sleek unit, cooling the vapor and ensuring impressive vapor production. Notice to buyers: The product is considered goods in a sealed package that, once opened by the consumer, cannot be returned for hygienic reasons. Therefore, withdrawal from the purchase contract is not permitted. In compliance with applicable regulations, when selling smoking aids and electronic cigarettes online, the seller is required to verify that the purchaser is at least 18 years of age.

The brennenstuhl®Connect WiFi smoke and heat alarm WRHM01 in white gives you an early warning of fire.The combination of smoke detection and heat sensor detects a fire reliably and quickly.With the brennenstuhl®Connect App you will be informed immediately and everywhere via push notification on your smartphone. If you are outdoors or just travelling, let friends or neighbours quickly check what's going on. The WiFi smoke and heat detector is easy and inconspicuous to install thanks to the fastening material. Compatible with any brand of router and requires no hub. Be sure to select the 2.4 GHz band when connecting. The WLAN smoke detector also has the following features:Tested according to EN 14604Penetrating alarm signal 85 dBLow battery beepIncluding batteries 2x AA/LR6/ Mignon

Prismatic lamp holder with light output of 100 lm/W Equipped with a high efficiency SMD Samsung chip, which offers up to 85% energy saving Ballast or starter not required, direct AC power supply Long service life, low maintenance and energy saving No flickering, no UV radiation Applications - residential, hotels, shopping centres, offices and much more

50% less power consumption compared to conventional light fixturesHigh-performance SAMSUNG LED chipInstant start in less than 1 secondLong service life, low maintenance and energy savingApplications:Residential buildings, hotels, shopping centres, offices and much moreNote:We recommend using the system for a maximum of 10 - 12 hours per day.

Prismatic lamp holder with light output of 100 lm/W Equipped with a high efficiency SMD Samsung chip, which offers up to 85% energy saving Ballast or starter not required, direct AC power supply Long service life, low maintenance and energy saving No flickering, no UV radiation Applications - residential, hotels, shopping centres, offices and much more

50% less power consumption compared to conventional light fixturesHigh-performance SAMSUNG LED chipInstant start in less than 1 secondLong service life, low maintenance and energy savingApplications:Residential buildings, hotels, shopping centres, offices and much moreNote:We recommend using the system for a maximum of 10 - 12 hours per day.

Prismatic lamp holder with light output of 100 lm/W Equipped with a high efficiency SMD Samsung chip, which offers up to 85% energy saving Ballast or starter not required, direct AC power supply Long service life, low maintenance and energy saving No flickering, no UV radiation Applications - residential, hotels, shopping centres, offices and much more

Prismatic lamp holder with light output of 100 lm/W Equipped with a high efficiency SMD Samsung chip, which offers up to 85% energy saving Ballast or starter not required, direct AC power supply Long service life, low maintenance and energy saving No flickering, no UV radiation Applications - residential, hotels, shopping centres, offices and much more

Warranty: 2 years Length [mm]: 156 Inner diameter [mm]: 30 Bearing Type: Anti-friction Bearing Fitting Position: Centre Hole Spacing [mm]: 130 Weight [kg]: 0.643 Supplementary Article/Info 2: with ball bearing

SubMARINE LED - moisture-proof luminaire with integrated LED module.Delay-free full light power, easy installation.Product advantages:Very homogeneous lightDust-tight and protected against water jets (IP65)Application areas:Cellars, garages, warehouses Technical equipment:Complete mounting and connection accessories included.

The dual microphone array for far-field speech capture uses two powerful digital microphones to accurately capture speech and voices from up to 3 meters away, even in noisy environments. Point noise is effectively suppressed by using both microphones. Far-field speech detection up to 3 meters Integrated NLU algorithms for noise suppression Compatibility with open platforms (I2S, USB) programmable WS2812 RGB LED for visual effects support for external 5V power supply The microphone array is equipped with an XMOS XU-316 AI sound and audio chip, which offers a variety of algorithms for Natural Language Understanding (NLU). These include interference cancellation (IC), acoustic echo cancellation, noise reduction and automatic volume management (AGC). These technologies enable high-quality voice recording, even in challenging acoustic environments.The board's compatibility spans various hardware platforms, including XIAO ESP32S3 (Sense) and Adafruit QT Py via I2S as well as Raspberry Pi and PC via USB (Audio Class 2.0). In addition, the board features a programmable WS2812 RGB LED that enables custom visual effects and provides a versatile interface for applications.Technical specificationsCore chip: XMOS XU316Digital microphones: High-performance digital microphones * 2Sensitivity: -26 dBFSAcoustic overload limit: 120 dBLSNR: 64 dBAPower supply: USB 5 V, external 5 VDimensions: 35 mm x 86 mmAudio output: Speaker connection / 3.5 mm headphone socketMaximum sampling rate: 16 kHzSpeakers: Supports 5 W amplifier speakersConclusion: The dual microphone array offers a flexible and powerful solution for precise far-field voice recording, supported by advanced NLU algorithms and open platform compatibility.External linkshttps://wiki.seeedstudio.com/reSpeaker_usb_v3/

FeaturesMeasured variables: CO2 concentration (VOC measuring method, display of theCO2-equivalent), temperature, air humidityDisplay: paper-white display with heartbeat function and LED traffic lightAlarm: Signal tone when CO2 concentration exceeds 1000ppm (signal tone can be switched off)Ready for use after a short warm-up time of 30 secondsOperating temperature: 0...50 °CAmbient humidity: 0...95 % RHOperating voltage: 5 V DC, Micro-USB connection (incl.)Protection class IP30Wall mountingAreas of applicationLiving roomsWork and office roomsSchool and teaching roomsSeminar and recreation roomsOther closed rooms with a high number of personsFunctional descriptionThe device requires a permanent connection to a power supply unit for operation. After the device is connected to the power supply unit, a warm-up phase of 30 seconds begins. During this time the LED light flashes red. The kiro air is then ready for operation and shows the CO2 concentration, temperature and relative humidity on the display. Normal operation is signalled by the flashing of the measured variable symbols (heartbeat function). The LED traffic light changes colour according to the measured CO2 concentration:Green: CO2 concentration up to 800ppmYellow: CO2 concentration 800 to 1000ppmRed: CO2 concentration above 1000ppmIf a CO-2 concentration of 1000ppm is exceeded, a signal tone is emitted for 5 seconds. This is a warning for the user to ventilate the room. If the CO2 concentration is permanently above 1000ppm, the signal tone is emitted a second time after three minutes. This function can be deactivated if required. This is done by pressing a switch with a pointed object on the side of the device and is indicated by a crossed-out signal symbol in the display.

Digital yearly timer with integrated Bluetooth interface for programming via an app on your smartphone or tablet. Can be expanded to up to six channels with channel extensions. Potential-free changeover contacts for time-dependent control of equipment. Programming of daily, weekly, holiday, pulse, cycle and random programmes with up to 120 memory slots. High degree of security thanks to sealable transparent cover and access protection managed via PIN code. LED load can be switched up to 500 W. Backlit display and automatic daylight saving time/winter time changeover. Possible to connect separate DCF77 aerial or GPS aerial.

Professional entry quality produced from ABS plastic• Robust design• Impact-resistant ABS case shell• Hardened aluminium frame• Ergonomic grip• Two high-quality tip cylinder metal locks• Additional combination lock• Three robust metallic hinges• Robust cover holder, 2x riveted• Carrying rings, carrying strap• Interior dimensions 470 x 220 x 360 mm(Tools not included)

WERMA base with integrated tubeAccessories for pipe mountingFor the WERMA modular system, you need the following elements:• Signal element(s)• Connecting element, floor or pipe mounting• Accessories, floor or pipe mountingOptional:• Acoustic elementAdvantages of the modular system:• Simple handling with a bayonet lock• Simple assembly and disassembly of the individual elements• Lamp replacement without the need for tools• Any combination by means of the modular system• High degree of protection IP 65

AC/DC switch regulator IC for output capacities of 0...290 WCMOS-IC with integrated high-voltage MOSFET, PWM-control, error detection etc.No heat sink necessary for capacities to 34 W in DIL-8 housingFully integrated soft startExternally programmed current limitationEnergy-saving EcoSmart® technology integratedUnder and overvoltage detection on the outputFrequency jitter minimizes filter costsFitting design kits included

AC/DC switch regulator IC for output capacities of 0...290 WCMOS-IC with integrated high-voltage MOSFET, PWM-control, error detection etc.No heat sink necessary for capacities to 34 W in DIL-8 housingFully integrated soft startExternally programmed current limitationEnergy-saving EcoSmart® technology integratedUnder and overvoltage detection on the outputFrequency jitter minimizes filter costsFitting design kits included

Integrated wireless exhaust controller AS-6020.3INTEGRATED DEVICE for extractor hood or flush-fitted socket with a new mini transmitter. Can be installed optionally with a white or brown housing (to suit wooden windows).Mini transmitter unitIncl. transmitter housing in brown (suitable for wooden windows)Simple sensor technology, with switchMaximum load capacity 1000 W (5 A)Operating voltage 230 V/50 Hz: 3 V - CR2450 (transmitter)Wireless range up to 50 m, depending on local conditionsThe light function of the extractor hood remains completely unchangedPotential-free contactIncluded in deliveryReceiverMini wireless transmitter (with replacement housing in brown)Mounting materials/instructions

Integrated rocker switchSuitable for the secondary-side switching of halogen lamps.

Integrated rocker switchSuitable for the secondary-side switching of halogen lamps.