329 products were found matching your search for inverter in 2 shops:

For electrode welding using the MMA method with direct current (DC)Lightweight and mobile, 2-m mains cable, extra-long ground and electrode holder cable (3 m)Incl. carrying strap, brush with slag hammer, ground clamp and electrode holderAdjustment range 15 - 120 AWeldable electrodes: dia. 1.5 - 3.2 mmMax. no-load voltage: 75 VControl range: 15 - 120 ASupply voltage: 230 VMains fuse: 16 AInsulation class: IP21SProtection class: FWeight: 3.6 kgDimensions without packaging (HxWxD): 28x13x25.5 cm

Inverter 230-12V Max. 60W With the compact Carpoint inverter you can connect 12 Volt devices to a 230 Volt socket. The Carpoint inverter is suitable for connecting a cool box. navigation system. car radio. car charger or other devices with a cigarette lighter connection to 230 Volt. The inverter delivers a maximum current of 5 Amps and the maximum power is 60 Watts. Before connecting a 12 Volt accessory. check that the accessory to be connected does not require more power than 5 Ampere. The Carpoint inverter is suitable for use in the home. boat. caravan or motorhome. The inverter is protected against short circuit. overload and overheating. The length of the 230 Volt cord is 1.5 meters and the length of the 12 Volt cord is 30 centimeters. - For connecting 12V to AC power (220V). - Input: 200-240V AC / 50-60Hz - Output: 13V DC / 4.5A - Protected against overload. overheating and short circuit. Guarantee: 2 years plug: 12V application: converter

Technaxx TE20 inverter, 2000 WFeatures:For the mobile use of various electronic devices via 12-V connection2x USB ports with max. 6 A (in total) QC 3.02x 230-V sockets with on/off switchConverts 12-V DC battery power to standard 230-V AC mains voltage to connect a wide variety of electronic devices such as tablets, smartphones, laptops, games consoles, TVs, DVD/MP3 players, camping equipment, navigation systems and moreMax. output power: 2000 W (continuous) and 4000 W (peak)Automatic shut-off to protect the car battery (alarm at ~10.2 V and ~15.8 V)Overload and short-circuit protectionOverheating protection via the built-in fanFixed bracket on the device for secure attachmentThe display shows the input and output voltages as a numerical value and as a diagram for easier viewing.Technical specifications:Battery input voltage DC 12 V (10.2 V - 15.8 V)Output voltage: AC 230 V/AC frequency 50 Hz nominalModified sine waveProtective circuit (DC overload): 6x 40-A internal fusesCable length: 2 x 60 cm

Victron Energy's Cerbo GX communication center (MPN BPP900450100) gives you perfect control over your system and maximizes its performance.The latest device in Victron's GX line scores high on connectivity and smart power. Maximizing system performance has never been easier.Easy monitoring and control:With the Cerbo GX, you can quickly monitor battery state of charge, power consumption, power generation from PV, generator and grid. Tank level checks and temperature measurements are also possible. Easily control the shore power feed current limit, the (automatic) start/stop generator, or change any settings to optimize the system. Track alerts, perform diagnostic checks and solve problems remotely.Features of the Cerbo GX communication centerAvailable connections:4 tank connections4 temperature ports3 VE.Direct ports3 USB ports4 digital inputs2 relaysFlexible connection options:System control through the Cerbo GX communication center is possible regardless of time and place. The device offers three different options for connection. Either via the free Victron Remote Management (VRM) portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth®.Scope of delivery:Cerbo GX devicePower cable with Inlne fuse and M8 connection sockets for battery or DC bus mountingVE.Can termination resistors (2 pcs.)Terminal blocks for all connections on each side

High-quality inverters for grid-independent power needsOSRAM POWERinvert PRO is an extensive range of professional high-performance inverters for use in field work. Available as pure sine wave or modified sine wave for 12 V and 24 V applications. OSRAM POWERinvert Pro inverters pick up the 12 V or 24 V DC power supply of the vehicle and convert it to 230 V AC to operate and control the electrical devices in service vehicles. Pure sine-wave inverters generate an undistorted sine wave at the same frequency as the mains current to power sensitive electronics. Modified inverters have a distorted frequency, which means they can power less complicated products such as refrigerators and power tools.Compatibility with 12 V which generates a pure sine wave of 230 V AC with a rating of 1000 WWorks with all 12 V vehicles and generates 230 V mains power with a rating of 1000 W for all electronic devices, including sensitive devices, for working in remote locations

Gateway for the transmission of radio signals from Hoymiles® inverters to the WLAN network. Hardware compatible with the open source software OpenDTU. Display of data with WEB browser via PC or smartphone. Connection to smarthome systems is possible via MQTT. Professionally manufactured in industrial quality, no open air wiring of modules. ESP32 and NRF24L01+ module, CH340 as USB/serial converter permanently soldered on the board. 2 LEDs for status indication (function depends on software).USB-C connector 5 volts, approx. 150 mA for power supply via plug-in power supply, power bank or PC/notebook. OLED display 0.96'' (2.44 cm) for displaying the current power, as well as the daily and total values (depending on the software used).Compatible with the following inverters:Hoymiles HM-300Hoymiles HM-350Hoymiles HM-400Hoymiles HM-600Hoymiles HM-700Hoymiles HM-800Hoymiles HM-1000Hoymiles HM-1200Hoymiles HM-1500Scope of delivery:DX-DTU board in aluminum case, tested and programmed with openDTU firmware.Important:From the manufacturer Hoymiles! It is only compatible. Knowledge to describe the ESP is helpful.

MEAN WELL 230 V DC/AC inverter real sine 400 WFeatures:Closed designTrue sine output (THDPeak power up to 800 WOutput voltage adjustableRemote functionShutdown when the battery is too deeply dischargedLow battery voltage alarm functionProtected against short circuit, over-voltage and over-temperatureSafety standard: IEC 62368-1EMC standards: EN55032 Class A3-year manufacturer's warrantyTechnical data:Housing: closed metalDimensions (W x H x D): 186 mm x 32 mm x 100.5 mmWeight: 750 gMTBF: 84,000 hConnection type, input: connectorOvervoltage protection: yesOver-temperature protection: yesShort-circuit protection: yesShutdown if the battery is too deeply discharged: yesLow battery voltage alarm: yesConnection type, output: connectorNominal input voltage: 24 VMin. DC input voltage: 20 VMax. DC input voltage: 33 VOperating expectancy: 30,000 hoursOutput power: 400 WOutput voltage: 230 VOperating mode: real sineEfficiency: 93%Idle power: less than 1.5 WInsulation voltage I/P-I/O: 3000 VInsulation voltage O/P-FG: 1,500 V

Growatt MOD 4KTL3-XH2 4kW hybrid inverter 3-phaseThe Growatt MOD 4KTL3-XH2 4kW solar inverter enables you to operate your own PV system with a total power of up to 8000 W.The MOD 4KTL3-XH2 inverter from Growatt enables you to use generated solar energy for your own needs and thus become less dependent on rising electricity costs. You can also feed unused PV electricity into the public grid and thus benefit from the feed-in tariff. The output power of the MOD 4TL3-XH2 is up to 4000 W, with an efficiency of 97.5% according to European efficiency standards. With its two MPP trackers, the MOD 4KTL3-XH2 ensures optimal performance for your PV system at all times.The MOD 4KTL3-XH2 is easy to operate via the integrated OLED touch display.

The MultiPlus-II combines the functions of the MultiPlus and the Multigrid.It has all the features of the MultiPlus and also an option of an external current transformer to implement the functions PowerControl and PowerAssist and to optimize the own consumption with external current sensing (max. 32 a). It also offers all the features of the Multigrid with the built-in anti-islanding function and an ever-increasing list of countries in which it is approved.Note: For a short period of time, this product was called Multigrid-II.PowerAssistThe MultiPlus-II prevents overloading a limited AC source such as a generator or a shore power supply. First, the battery charge is automatically reduced to protect against overload. Next, the power of a generator or a shore power supply is boosted with energy from the battery.ESS: Energy storage systemsThe MultiPlus-II is a key component in a Victron ESS. It is very flexible and can be combined with an MPPT solar charger or a grid-infeed inverter for PV plants. See the ESS (Energy Storage System) manual for examples and additional information.Uninterruptible AC power (UPS function)In the event of a grid fault or if the shore current or on-board generator is interrupted, the inverter of the multi is switched on automatically and takes over the supply of the connected loads. Switching occurs so quickly (in less than 20 milliseconds) that computers and other electronic devices can operate without interruption.Remote monitoring and controlIn conjunction with a GX device (e.g. Cerbo GX), you can monitor and control your Multi and the system or systems locally (LAN) or remotely via the Internet from anywhere in the world using the free VRM app and free VRM portal website. It can be accessed from a phone, tablet, laptop or PC running a variety of operating systems.Technical Data:Model: MultiPlus-II 24/3000/70-32Transfer switch: 32 A.AC input current: 32 A.AC output: 230 V AC/ 50 HzDC input voltage: 38 - 66 V.Output power (25 °C): Const. 3,000 VAPeak noise: 5,500 W.Battery charging current: Max. 35 A.Weight: 18 kgDimensions: 506 x 275 x 147The delivery time can take up to 14 working days.

Enclosure: DIL-20

Enclosure: DIL-14

Enclosure: DIL-14

Housing: DIL-20

Enclosure: DIL-14

Enclosure: DIL-14

This logic module contains six independent inverters

Housing: DIL-14

Enclosure: DIL-20

Housing: DIL-20

Housing: SO-14