281 products were found matching your search for leakage in 3 shops:

AEOTEC Water Leak SensorIdentify undesired wet spots directlyWith the Aeotec Waterleak Sensor you are well prepared for possible leaks. The Waterleak Sensor can detect leaking water on the top and bottom side, enabling early intervention and damage reduction.Leak detectionPush Up notificationAccurate temperature measurementSlim designThanks to its slim and compact design, the Aeotec Water Leak Sensor can be optimally placed in gaps to detect leaking water as early as possible. Simply place the sensor where water could leak, for example under the sink, the washing machine or in the laundry cellar. As soon as a water leak is detected, you will receive a notification so you can act immediately. Notifications can be made via the SmartThings app and smart devices such as sirens and lights.Convenient indoor climateFrom now on, you will always know when the temperature changes in your home. Let your smart devices create a convenient indoor climate by connecting thermostats or A/C units to your SmartThings App. The smart devices will do the rest for you.Control doesn`t stop hereAeotec’s range of intelligent, automation controllers doesn’t end with TriSensor. From MultiSensor to TriSensor, it’s a range that keeps you in control and ensures that automation systems are always an intelligent enhancement.

EMS LoRaWAN 5in1 sensor temperature/humidity/acceleration/leakage/door contactLoRa Alliance certifiedAttachment to doors, windows, cabinets and much moreConfiguration via NFC or ''over the air''LoRaWAN class A/C end devicePowered by 1x 3.6V AA lithium batteries (not included)Up to 10 years battery life (depending on configuration)The EMS is an extremely versatile sensor for measuring:accelerationtemperaturehumiditywater leakageDoor contactBarely larger than an AA battery, the EMS is one of the smallest LoRa sensors on the market. The EMS can be used as a normal indoor temperature/humidity sensor or for other smart building applications. Its small size makes it ideal for mounting on door frames, under desks, dishwashers and washing machines or where limited space makes installation difficult.Attention: This device is supplied without batteries.Note: The leakage sensor detects a change in conductivity between the electrodes on the underside of the EMS. The EMS itself offers no protection against water. For a more robust IP67-certified solution, you can use the ELT series, to which an external sensor cable can be connected.

ELT water leakage cableLength: 1mWater leakage sensor cable for ELT devices Place the water leak sensor cable where you want to detect water. The sensor cable can be connected to a normal cable and connected to the ELT.

EM300-MLD-868M LoRaWAN outdoor leakage sensor with membrane 40x40 cmTechnology: LoRaWAN®, Milesight D2DFrequency: EU868Transmission output: 16 dBm(868 MHz)Sensitivity: -137 dBm at 300 bpsMode: OTAA/ABP Class ASensorTrigger medium: 400 x 400 x 0.25 mm printed leak detection filmTrigger condition: upon contact of the sensing film with conductive liquidLeak detection: detects the presence of fluids through a flexible printed membrane that covers a larger area.High-quality membrane: equipped with a high-quality printed membrane that can be reused and adapted.Environmentally friendly material: uses eco-friendly material that is fully reusable and does not cause hazardous emissions.Ruggedness: IP67 waterproof and UV-resistant housing for harsh environments.Battery life: integrated 4000-mAh replaceable battery with a life of up to 10 years without replacement.Data storage: stores 1000 historical records locally and supports retransmission to prevent data loss.D2D protocol: supports the Milesight D2D protocol for ultra-low latency and direct control without gateways.NFC: equipped with NFC for one-touch configuration.

Aqara water leakage sensor T1The Aqara water leak sensor T1 detects water leaks or flooding and monitors the status of the water leak. If there is a water leak or flooding, a warning message can be sent immediately via app. It also works with other smart accessories to automate your home.Triggers Aqara Hub alarms and push notificationsWhen the water level reaches 0.5 mm, the T1 water leak sensor triggers the Hub to sound an alarm and send a notification to your phone.Dust and water resistance class IP67The Aqara T1 water leak sensor complies with dust and water resistance class IP67. It works reliably in damp and dusty environments.Past everywhereThe Aqara Water Leak Sensor T1 can be placed anywhere as required and protects your home with its elegant design. In addition, the detection area can be easily extended by connecting any wires to the probe screws.Multi-ecosystem supportAfter binding to an Aqara hub, the sensor can be made available on third-party platforms such as Apple Home (with critical alerts). In addition, it can be natively integrated into Samsung SmartThings and Yandex Smart Home.Aqara Home AutomationsYou can customize different scenes with our suite of smart home products. For example, if a leak is detected, the sensor will trigger the Aqara Smart Plug to close the water valve immediately. *Advanced technologyThe outer casing is made of UV-resistant material and protects the sensor from discoloration. The sensor is also energy efficient and a battery can last over 2 years with normal use.* This scene requires an AC powered water valve and an Aqara Smart Plug.SpecificationsBattery: CR2032Wireless protocol: Zigbee 3.0Dimensions: 50 × 50 × 15 mm (1.97 × 1.97 × 0.59 inches)Operating temperature: 0 °C ~ 55 °C (14 °F ~ 131 °F)Operating humidity: 0 - 100 % RHScope of delivery:Water leak sensor T1User manual

EM300-ZLD-001m leakage cableThe EM300-ZLD-001m leakage cable from Milesight is a 1-m extension cable for the EM300-ZLD.

EM300-ZLD-003m leakage cableThe EM300-ZLD-003m leakage cable from Milesight is a 3-m extension cable for the EM300-ZLD.

Leakage current clamp meter with DATA HOLD and maximum/minimum display• Measurement of leakage currents and charging currents• Digital and bar graph display• 2 measurement ranges of 30/300 mA and 30/300 A• Unaffected by external magnetic fields• Jaw size 40 mm• Compact, practical and easy

The F65 measuring clamp is ideal for detecting and measuring leakage currents in the event of insulation faults and unintentional disconnections of RCCBs.In addition, this device also provides all the functions of a multimeter. The F65 clamps have an RMS converter so that unaltered measurements are possible even with distorted signals.Specifications: Display: 10,000 counts, backlitCurrent: 30 µA to 100 A ACResolution: 10 µAHarmonic filter for 50/60 HzExtensive insensitivity to interference currents: 70 dBAC/DC voltage: 0.1V to 600VFrequency: 5 Hz to 1 kHzResistance: 0.1 ohms to 1 kohmsAudib. Continuity test: Functions: Max, Relative, Store the adAutomatic switch off and battery status indicatorSuitability: CAT III 300 V

Clamp-on current meter PCE-LCT 1Digital clamp-on current meter for checking leakage current RMS current measurement Continuity and resistance testing Voltage measurement up to 400 V Product benefits:With the PCE-LCT 1 clamp-on current meter it is possible to measure leakage currents in the range up to 100A. Leakage currents occur when a current passes through an electrical conductor that is not normally intended for conducting current. The PCE-LCT 1 clamp-on current meter detects these currents and shows them on the display. With the help of the PCE-LCT 1 clamp-on current meter, faults in the insulation, for example, can be detected. This is particularly advantageous where machines are operated that cannot or must not be switched off and where the insulation has not yet been tested. Because the clamp-on meter can measure not only leakage currents but also the normal current flow, voltage up to 400 V, resistance and continuity, it is ideally suited to the industrial electrician who has to perform other measuring tasks in addition to testing equipment.

AC Leakage Clamp Meter, 6 mA to 200 A (6 ranges) provide a broad measurement range from leakage currents to load currents, suitable for AC frequencies between 15 Hz and 2000 Hz.A newly designed sensor allows the detection of miniscule leakage currents while offering a core diameter of 40mm. Complies with IEC/EN 61557-13, an international standard for leak clamp meters. Solve GFCI and RCD problems quickly. Easily transfer measurement data to your smartphone or tablet by using HIOKI's free app GENNECT Cross (Bluetooth adapter Z3210 required). CAT IV 300 V, CAT III 600 VEasy! Just connect the optional Z3210 Wireless Adapter (sold separately) to your Hioki compatible instrument, to make it Bluetooth® ready. Wirelessly connect Hioki-compliant instruments with a simple connection. Transmit measured values to your tablet or smartphone.Key Features:Easily transfer measurement data to your smartphone or tablet by using the free app GENNECT Cross or to an Excel® file (Wireless Adapter Z3210 is necessary)Detect minuscule leakage currents with a newly designed sensor (Core jaw diameter up to 40 mm)Broad measurement range extending from leakage currents to load currentsComplies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp metersSolve GFCI and RCD problems quicklySpeed up pass/fail judgments with the built-in comparator function

Low-leakage diode SMD, SOT-23, 80 V, 0.2 A

Leakage sensor for devices with PTR multiconnectorLeakage sensor for flood monitoringEasy setupCable length: 2.5 mCompatible to devices with PTR multiconnectorLeakage Point Sensor 7313 allows room monitoring for potential flooding events with conductive liquids such as fresh water and salt water. The free cable ends of the sensor are simply connected to the corresponding free terminal inputs of the GUDE product. Thanks to the attached 2.5m cable, quick and easy sensor placement is possible. In the event of leakage, a signal is sent to the connected GUDE product by wetting the two electrodes with a conductive liquid, which triggers a corresponding alarm message.Suitable for following GUDE products:Expert Net Control 2111Expert Net Control 2191Expert Net Control 2302-1Expert Sensor Box 7214 Series

The highly-absorbent puppy pads are not only ideal for dog toilet training, but also perfect as support for older and incontinent dogs. Each pad consists of 4 layers that prevent any leakage. The absorbent top layer, made of non woven fabric, traps moisture and reduces unpleasant odors. The tissue

The highly-absorbent puppy pads are not only ideal for dog toilet training, but also perfect as support for older and incontinent dogs. Each pad consists of 4 layers that prevent any leakage. The absorbent top layer, made of non woven fabric, traps moisture and reduces unpleasant odors. The tissue

The highly-absorbent puppy pads are not only ideal for dog toilet training, but also perfect as support for older and incontinent dogs. Each pad consists of 4 layers that prevent any leakage. The absorbent top layer, made of non woven fabric, traps moisture and reduces unpleasant odors. The tissue

The highly-absorbent puppy pads are not only ideal for dog toilet training, but also perfect as support for older and incontinent dogs. Each pad consists of 4 layers that prevent any leakage. The absorbent top layer, made of non woven fabric, traps moisture and reduces unpleasant odors. The tissue

The highly-absorbent puppy pads are not only ideal for dog toilet training, but also perfect as support for older and incontinent dogs. Each pad consists of 4 layers that prevent any leakage. The absorbent top layer, made of non woven fabric, traps moisture and reduces unpleasant odors. The tissue

The highly-absorbent puppy pads are not only ideal for dog toilet training, but also perfect as support for older and incontinent dogs. Each pad consists of 4 layers that prevent any leakage. The absorbent top layer, made of non woven fabric, traps moisture and reduces unpleasant odors. The tissue

Medela #39;s ultra-breathable absorbent pads in a pack of 60 offer an effective and discreet solution to dealing with breast milk leakage during breastfeeding.