26 products were found matching your search for lifepo in 1 shops:

Battery charger for cars and motorcycles 4 A, 6/12 V Intelligent charger controlled by the microprocessor.High frequency technology, energy saving and high efficiency, no damage to the batteries.9-step intelligent charging cycle.Optional charging voltage: 6 V/12 VOptional charging current: Auto, 2 A, 4 A.1.5-V low-voltage start.Suitable for all types of lead-acid batteries, STD, AGM, GEL, LiFePO4.Protected: Reverse polarity, short circuit, overload, overvoltage, overtemperature, spark-proof.Backlit LCD screen for charging status and information.Special safety design: If the battery is not connected correctly, the DC connector has no output.Fully intelligent charging, detection, analysis and maintenance.Intelligent maintenance, extending battery life.

The Pylontech US2000C (MPN US2000NB02V00201) is a latest generation lithium memory. The accumulator has been specially designed to fully meet the high demands placed on a solar accumulator today. Maximum safety and long life are guaranteed even with regular deep discharge thanks to the latest technology.The latest battery of the market-leading manufacturer with now 2.4 kWh per module has again a battery management system (BMS) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters.Extremely cycle resistant - over 6000 cycles at 95% DoDMore usable energy content than the predecessor model US2000Lifetime over 10 yearsAbsolutely intrinsically safe lithium technologyCompatible with many available invertersAutomatic address setting when connected in multi-groupsHigh charge and discharge capacity possibleIntegrated BMSVery high storage density - light weight and compact designEasy installation thanks to modular designAbsolutely maintenance-free and durableBuilt-in soft-start function capable of reducing the current surge when the inverter is started from the batteryDual active protection at BMS levelSupports WakeUp by 5-12V signal from RJ45 portPre-charge function to protect the ESS system from overvoltage functionBattery management system in each moduleThe battery management system integrated into each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure.Protection against:Deep discharge and overchargeovervoltage during chargingexcessive currents during charging and dischargingover- and undertemperatureshort circuit and reverse polarityConstant monitoring of the individual cell voltages (cell balance).Modular designThe system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS.High cycle lifeThe extremely high cycle life of the installed LiFePo4 cells make Pylontech US2000C modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-tied or stand-alone, Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies.Technical DataBattery type: Lithium iron phosphate (LiFePo4)<...

The US5000 is a lithium storage device of the latest generation. The accumulator has been specially designed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long life are guaranteed even with regular deep discharge thanks to the latest technology.The latest battery of the market-leading manufacturer with now 4.8 kWh per module has again a battery management system (BMS) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters.Extremely cycle resistant - over 6000 cycles at 95% DoDLifetime over 10 yearsAbsolutely intrinsically safe lithium technologyCompatible with many available invertersAutomatic address setting when connected in multi-groupsHigh charge and discharge performance possibleIntegrated BMSVery high storage density - light weight and compact designEasy installation thanks to modular designAbsolutely maintenance-free and durableBuilt-in soft-start function capable of reducing the current surge when the inverter is started from the batteryDual active protection at BMS levelSupports WakeUp by 5-12V signal from RJ45 portPre-charge function to protect the ESS system from overvoltage functionBattery management system in each moduleThe battery management system integrated into each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure.Protection against:Deep discharge and overchargeovervoltage during chargingexcessive currents during charging and dischargingover- and undertemperatureshort circuit and reverse polarityConstant monitoring of the individual cell voltages (cell balance).Modular designThe system is modular in design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS.High cycle lifeThe extremely high cycle life of the installed LiFePo4 cells make Pylontech US2000C modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-tied or stand-alone, Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies.Technical DataBattery type: Lithium iron phosphate (LiFePo4)Rated voltage: 48VRated capacity: 4800 WhUsable capacity (95%...

The US3000C (MPN US3000C) is a lithium storage device of the latest generation. The storage tank has been specially designed to fully meet the high demands placed on a solar storage tank today. Maximum safety and long life are guaranteed even with regular deep discharge thanks to the latest technology.The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (BMS) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible with many available inverters and certified...Extremely cycle resistant - over 6000 cycles at 95% DoDLifetime over 10 yearsAbsolutely intrinsically safe lithium technologyCompatible with many available invertersAutomatic address setting when connected in multi-groupsHigh charge and discharge performance possibleIntegrated BMSVery high storage density - light weight and compact designEasy installation thanks to modular designAbsolutely maintenance-free and durableBuilt-in soft-start function capable of reducing the current surge when the inverter is started from the batteryDual active protection at BMS levelSupports WakeUp by 5-12V signal from RJ45 portPre-charge function to protect the ESS system from overvoltage functionBattery management system in each moduleThe battery management system integrated into each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure.Protection against:Deep discharge and overchargeovervoltage during chargingexcessive currents during charging and dischargingover- and undertemperatureshort circuit and reverse polarityConstant monitoring of the individual cell voltages (cell balance).Modular designThe system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS.High cycle lifeThe extremely high cycle life of the installed LiFePo4 cells make Pylontech US2000C modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-tied or stand-alone, Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies.Technical DataBattery type: Lithium iron phosphate (LiFePo4)Rated voltage: 48 VRated capacity: 3552 Wh<...

LiFePo4 26650FPThe cells that use lithium-iron-phosphate as a cathode can handle more than 2,000 charge cycles and are therefore much more durable than conventional lithium cells. Ideally suited for high current applications, lithium-iron-phosphate technology enables a quick charge in just 30 minutes. A further feature is the working temperature range of -20°C to 60°C.The cells can therefore also be used under the most extreme environmental conditions• Voltage: 3.3 V• Battery capacity: 2400 mAh• Dimensions: (Ø x L) 26.2 mm x 65.2 mm• Type: 26650

GREEN CELL LiFePO4 battery 12.8 V 200 Ah 2560 Wh LFP lithium battery 12 V with 150 A BMS for motorhome camping solar caravanBenefits:Reduced weight and longer use - the LiFePO4 200 Ah battery weighs about 36 kg less than its lead-acid technology counterpart and offers 100% usable capacity, and is adapted to cyclic operation and deep discharge.Longer service life - over 3000 charging cycles for DoD 100%, therefore guaranteed for 10 years of operation, and fully operational even after a year of non-use thanks to low self-discharge.Efficient nanophosphate cells allow the use of high charge and discharge currents, and the operating temperature range from -10 C to 55 C enables use in motorhomes, electric trolleys or in photovoltaicsSafety - phosphate batteries have excellent thermal and chemical stability. Made from light metals, they are non-toxic and environmentally friendly. Recycling is simple and inexpensive.

GREEN CELL LiFePO4 battery 12.8 V 125 Ah 1600 Wh LFP lithium battery 12 V with BMS for motorhome solar wind energy food truck caravanBenefits:The lithium-iron phosphate battery offers exceptional durability, power efficiency and charging speed. It is also a more viable and lighter alternative to lead-acid batteries.LiFePO4 retain over 100% of their capacity even after 3000 charging cycles, thus guaranteeing an operating life of over 10 years. Thanks to the low self-discharge, the battery is fully operational even if it is not used for one year.High durability and service life, low weight and current parameters allow the batteries to be used for the power supply of recreational vehicles, motorhomes and photovoltaics.Batteries are equipped with a BMS battery management system that controls not only the charging and discharging of the battery, but also the temperature to ensure safety.

GREEN CELL LiFePO4 battery 12.8 V 80 Ah 1024 Wh LFP lithium battery 12 V with BMS for photovoltaic system motorboat camping marinaBenefits:The lithium-iron phosphate battery offers exceptional durability, power efficiency and charging speed. It is also a more viable and lighter alternative to lead-acid batteries.LiFePO4 retain over 100% of their capacity even after 3000 charging cycles, thus guaranteeing an operating life of over 10 years. Thanks to the low self-discharge, the battery is fully operational even if it is not used for one year.High durability and service life, low weight and current parameters allow the batteries to be used for the power supply of recreational vehicles, motorhomes and photovoltaics.Batteries are equipped with a BMS battery management system that controls not only the charging and discharging of the battery, but also the temperature to ensure safety.

GREEN CELL LiFePO4 battery 12.8 V 100 Ah 1280Wh LFP lithium battery 12 V with BMS for motorhome solar batteryBenefits:The lithium-iron phosphate battery offers exceptional durability, power efficiency and charging speed. It is also a more viable and lighter alternative to lead-acid batteries.LiFePO4 retain over 100% of their capacity even after 3000 charging cycles, thus guaranteeing an operating life of over 10 years. Thanks to the low self-discharge, the battery is fully operational even if it is not used for one year.High durability and service life, low weight and current parameters allow the batteries to be used for the power supply of recreational vehicles, motorhomes and photovoltaics.Batteries are equipped with a BMS battery management system that controls not only the charging and discharging of the battery, but also the temperature to ensure safety.

Disposable batteries are a big burden in the long run - both for the wallet and for the environment. Especially for lithium batteries, consumers have to dig deep into their pockets. So why not switch to rechargeable batteries, which are available in all sizes?To ensure that the investment in a rechargeable battery is worthwhile in the long run, it is important to use a charger that charges the batteries optimally and thus considerably extends their lifetime.For many common battery sizesEspecially in the lithium segment, a wide range of battery sizes is available. With the Lithium 4 charger from ANSMANN, you are choosing the universal all-rounder with the best price-performance ratio. You can charge up to 4 Li-Ion or Lithium Iron Phosphate (LiFePO4) batteries of the sizes 26650, 22650, 18650, 18500, 17670, 16340, 14500 and many more or 1-4 NiMH Micro AAA, Mignon AA or 1-2 Baby C batteries independently. The device recognises inserted NiMH and Li-Ion batteries completely automatically, only when charging LiFePO4 batteries do you have to set the cell chemistry manually after insertion before the automatic charging process starts.Longer fun with your batteryTo ensure that your battery can still deliver its optimum performance after many charging cycles, it is important that it is always charged gently and safely. The Lithium 4 charger from ANSMANN has a high-quality, microcontroller-controlled charging technology built in, which protects the battery from rapid wear and tear in several ways. This includes, among other things, the automatic switch-off of the charging process as soon as the cell is fully charged, as well as the gentle trickle charge for NiMH cells after the actual charging process. Lithium cells in particular must be handled with special care due to their high energy density. The special electronics in ANSMANN's Lithium 4 charger guarantee safety at the highest level.Smart extrasA highlight of this charger is the very legible and illuminated LCD, which informs you about all relevant parameters during the charging process. It displays the battery voltage, the charging capacity, the charging current, the charging progress and the battery chemistry of the selected charging slot. In addition, the status for each charging slot is displayed individually so that you can see at a glance which battery is still being charged or is already fully charged. The charger also gives acoustic feedback, e.g. when the battery is full or defective. If desired, the acoustic output can also be deactivated. The Lithium 4 charger from ANSMANN can be operated with any standard 5 V/2 A USB adapter. For optimal charging, ANSMANN recommends a 2.4 A USB high-speed charger with Smart IC.

Hochwertige Ladetechnik von FRIWO: Das ist die optimale Lösung für die mobile Anwendung. Das Portfolio umfasst äußerst energieeffiziente Ladegeräte mit minimalen Standby-Verlusten - ideal für ambitionierte Branchen wie mobile Werkzeuge und Gartengeräte, Medizintechnik oder Elektromobilität. Die GPP-Geräteserie erfüllt die Norm IEC 60335 und kann variabel mit länderspezifischen Netzsteckern ausgestattet werden. Die FRIWO Switchmode Ladegeräte können daher weltweit verwendet werden. Auf diese Weise werden Mobilität und Zuverlässigkeit hinsichtlich des Einsatzes des Produktes erhöht und ungeachtet des Einsatzbereiches ist eine konstante Zuverlässigkeit und Verfügbarkeit gesichert. ÜberlastsicherungÜberspannungsschutzDauerkurzschlussfestAC und DC-Anschluss sind frei konfektionierbarSpezifikationen:Eingangsspannung: 100 - 240 VFrequenz: 50 - 60 HzEingangsstrom: 180 - 450 mAAusgangsspannung: 13,2 VAusgangsstrom: 2000 mAZellen: 4DC-Ausgang: 3 Pol Texas-SteckerKabellänge: 1,8 mAbleitstrom: = 100 µAStand-by: = 0.8 WLieferung erfolgt ohne AC- und DC-Anschlusstecker, der muss für das entsprechnede Land und Gerät separat mitbestellt werden. Die Konfektionierung der DC-Seite ist nur einmal möglich. Ein späterer Wechsel ist ausgeschlossen!

High-quality charging technology from FRIWO: the ideal solution for mobile applications. The portfolio includes extremely energy-efficient chargers with minimal standby losses - ideal for ambitious sectors such as mobile tools and garden equipment, medical technology or electromobility. The GPP device series complies with the IEC 60335 standard and can be variably equipped with country-specific mains plugs. The FRIWO switch-mode chargers can therefore be used worldwide. This increases mobility and reliability with regard to the use of the product and ensures constant reliability and availability regardless of the area of application. Overload protectionOvervoltage protectionPermanently short-circuit proofAC and DC connection are freely configurableSpecifications:Input voltage: 100 - 240 VFrequency: 50 - 60 HzInput current: 180 - 450 mAOutput voltage: 6.6 VOutput current: 3500 mACells: 2DC output: 3-pin Texas plugCable length: 1.8 mLeakage current: = 100 µAStand-by: = 0.8 WSupplied without AC and DC connectors, which must be ordered separately for the corresponding country and device. The DC side can only be assembled once. A later change is not possible!

Mit dieser sehr hochwertigen Solar-Leuchteinheit mit hochwertiger LiFEPO4-Technologie können eigene Solarleuchten wie z.B. Solar-Gartenleuchten, Solare Hausnummernbeleuchtungen, Vogelhausbeleuchtungen, Solare Akzentbeleuchtungen und vieles mehr umgesetzt werden. Hierzu liefert die Solar-Leuchteinheit ''LongLife'' die Technik auf höchstem Niveau und der Anwender entscheidet selbst, welches eigene Projekt umgesetzt werden soll.Bei der Entwicklung dieses Sets stand neben der Langlebigkeit auch die Nutzung qualitativ hochwertigster Einzelkomponenten im Fokus.So verfügt das kräftige Solarpanel über eine laminierte Oberfläche und ist somit gegen Umwelteinflüsse bestens geschützt. Der LiFEPO4 Akku besticht durch extreme Zyklenfestigkeit und ist mit über 3000 Lade- und Entladezyklen auf Langlebigkeit getrimmt. Die Steuerplatine trennt zuverlässig bei drohender Tiefentladung die LED vom Akku und schont somit das Gesamtsystem. Platine: 52 x 29 mm, fertig bestücktAkku: 600 mAh / 3,2 Volt mit SteckerSolarpanel: 75 mAh @ 3.5 Volt mit Stecker, Größe: 60 x 45 mmLED: 5 mm kaltweiß 5000-6000K, bereits montiert am Stecker, 5 mm warmweiß 3000K zum montierenSchalter: bereits montiert am SteckerAkkubefestigung: 2 x KabelbinderAnschlussart: verpolungssicher

Additional battery for the Anker SOLIX Solarbank 2 E1600 Pro.Expand your Anker SOLIX Solarbank 2 E1600 Pro up to 9.6 kWh storage!(max. 5 storage modules) Technical data:Model: A17C1Battery type: LiFePO4 batteryCapacity: 1600 WhCharging cycles: 6000Charging power: max. 2000 WDischarge power: max. 1000 WCharging and discharging current: max. 75 AScope of delivery:1x extension battery for Anker SOLIX Solarbank 2 E1600 Pro.

Intelligent charger for Li-ion, Ni-MH, Ni-CD as well as LiFePO4 batteries. Features:• 4 charging slots• Each individual battery slot charges and monitors independently• Automatic recognition of Li-Ion, Ni-MH and Ni-Cd batteries• Three different charging modes (CC, CV and dV/dt)• Optimised for charging IMR batteries• The LCD display continuously displays information regarding the charging process• Two integrated switches for selecting information• Automatic recognition of the battery status and automatic adjustment of the charging modes and charging current (except LiFePO4)• Automatic charging cut-off• Temperature monitoring to protect against overheating• Optimal heat dissipation • Housing made of heat-resistant ABS plasticTechnical data:Input: 100 - 240 V AC Supported battery types: Li-Ion, Ni-Cd, NiMHOutput voltage: 4.2/3.7/1.48 VCharging current: max. 750 mABattery sizes: Micro AAA/Mignon AA/Baby CController functions: negative Delta V cut-off, automatic battery diagnosis, individual slot monitoring, quick capacity test, overcharge protection, temperature monitoringDimensions: 143 x 99 x 36 mmWeight: 239 g

Intelligent charger for Li-ion, Ni-MH, Ni-CD as well as LiFePO4 batteries. Features:• 2 charging slots• Automatic recognition of the battery status and automatic adjustment of the charging modes and charging current (except LiFePO4)• Each individual battery slot charges and monitors independently• Automatic recognition of Li-Ion, Ni-MH and Ni-Cd batteries• Three different charging modes (CC, CV and dV/dt)• Optimised for charging IMR batteries• The LCD display continuously displays information regarding the charging process• Two integrated switches for selecting information• Automatic charging cut-off• Temperature monitoring to protect against overheating• Optimal heat dissipation• Housing made of heat-resistant ABS plasticTechnical data:Input: 100 - 240 V AC, 12 V car plugSupported battery types: Li-Ion, Ni-Cd, NiMHOutput voltage: 4.2/3.7/1.48 VCharging current: max. 500 mABattery sizes: Micro AAA/Mignon AA/Baby CController functions: negative Delta V cut-off, automatic battery diagnosis, individual slot monitoring, quick capacity test, overcharge protection, trickle charging, temperature monitoringDimensions: 143 x 74 x 36 mmWeight: 168 g

This BatteryHat with LiFePO4 battery turns the Strompi V3 into a full-fledged UPS solution. The battery is available as a third power source, is monitored and automatically recharged.It is based on LiFePo4 technology and offers several essential advantages over standard lithium-ion structures:- a much longer service life than lithium-ion technologies- more charging cycles- the battery is automatically charged during operation on an external power source- Protection circuits against overcharge, short circuit and deep discharge are integrated in the battery electronicsFeatures- directly pluggable onto the StromPi3- executed pin header- Integrated protection / charging electronics- no chemical self-ignition possible- significantly longer life than lithium-ion technologies- more charging cycles than lithium-ion technologiesBattery characteristics- Lithium iron phosphate (LiFePO4)- 2000 mAh Capacity- 3.2 V DC voltageDimensions- Length x width x height: 65 x 56 x 22 mmScope of delivery- Battery unit

Ideal for solar-powered garden lights.3.2 V Solar LiFePo4 battery with increased positive pole.Cell size: AA (Mignon) / 14500Capacity: 600 mAhEnergy: 1.92 WhLength: 50.3 mmDiameter: 14.2 mm

8-stage car charger for 6-V and 12-V lead-acid, lead-gel and AGM batteries, as well as 12-V LiFePO4 batteriesIntelligent and safe charging controlThanks to its wide range of features, the 8-stage charger BC 6 - 12 V/2 A ensures safe, battery-preserving charging of lead-acid batteries with a capacity of 4 - 60 Ah. It guarantees optimum performance and a long battery service life. The ''MODE'' button can be used to select three intelligent charging programs, each with two charging currents. The charger is dustproof and protected against splash water (IP65) and has the following electrical safety features: reverse polarity protection, overcharge protection, deep discharge protection and short-circuit protectionIn addition, the intelligent charger is suitable for standby/parallel operation and can remain connected to the battery at all times. It always keeps it fully charged, even if the battery is under load/discharging at the same time.Selectable charging programs:6-V STD or 12-V STD: for lead-acid and lead-gel batteries12-V LFP: for lithium-iron phosphate batteries (LiFePO4, LFP)Charging currents of 1 A or 2 A can be selected for each charging program.Fully automatic, intelligent eight-stage charging

WSM 1 - The battery for the road versionHow WSM 1, but with battery power for mobile, wireless use. The perfect alternative to gas powered irons.Latest LiFePo4 battery technology - soldering capacity up to 1 hourSmall and handy to be absolutely fair price - The Weller ® soldering station WSM ideal for users who need a handy, uncomplicated device, but still want to work professionally.Thanks ESD Safety perfect manufacturing technology for use in laboratory, repair, service and industrial.Equipment• ESD safe for industrial use• Stop + Go function for efficient switch off• Touch Sensor Technology• Customized for Special Functions menu. settings• Temperature lock function• 2 personalized fixed temperatures• Equipotential bonding connector• Integrated micro soldering WMRP 40 W• chrome Lolben - Design• Interchangeable Micro-tip• Top RT 3, chisel, 1.3mm integrated heater• Safety rest with WDC 2 dry cleaningdelivery• WSM 1 soldering station with battery• WMRP Irons• Safety rest with WDC 2 dry cleaning• RT 3 soldering tip, chisel, 1.3 mm• Switching Power Supply