895 products were found matching your search for media in 3 shops:

Gigabit WDM Media Converter1x Gigabit SC port1x RJ45 10/100/1000 Mbps (Auto MDI/MDIX)9/125 µm singlemode fiberUTP Cat. 5, 5e cable (max. 100m)1550 nm TX / 1310 nm RXTL-FC311A-20 is a Gigabit media converter with a Gigabit RJ-45 port and a Gigabit SC fiber port, which can convert between electrical and optical signals. Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networks.Automatically negotiates half-duplex / full-duplex transmission mode.Adopts WDM technology and transmits and receives data on a single fiber.Extends the fiber distance up to 20 km.In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, where duplex mode is automatically negotiated.

Nvidia Shield Android TV 4K HDR (8GB) Streaming Media Player, B

Our durable CD case with aluminium trimming will help you to keep your favourite CDs organised, protected and away from the dust. Made of wood with a layer of ABS and full aluminium trimming, the box is very sturdy and hardwearing. The reinforced edges have improved its durability. Thanks to the

Gigabit WDM Media Converter.1× Gigabit SC Fiber Port1× 10/100/1000 Mbps RJ45 Port (Auto MDI/MDIX)Automatic negotiation of half-duplex/full-duplex transmission mode.Adopts WDM technology and transmits and receives data over a single fiber.Extends the fiber distance up to 2 km.TL-FC311A-2 is a gigabit media converter with a gigabit RJ-45 port and a gigabit SC fiber port that can convert between electrical and optical signals. Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networking.The TL-FC311A-2 uses Wavelength Division Multiplexing (WDM) technology and helps transmit and receive data up to 2 km away with only a single-mode fiber, saving half the cost of cable deployment for customers. TL-FC311A-2 transmits data at a wavelength of 1550 nm and receives data at a wavelength of 1310 nm on one optical fiber. Therefore, the terminal device used in conjunction with TL-FC311A-2 should transmit data with a wavelength of 1310 nm and receive data with a wavelength of 1550 nm. TP-Link Another media converter TL-FC311B-2 is one of the products that can work together with TL-FC311A-2.In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, in which the duplex mode is automatically negotiated.

Gigabit WDM Media Converter.1× Gigabit SC Fiber Port1× 10/100/1000 Mbps RJ45 Port (Auto MDI/MDIX)Automatic negotiation of half-duplex/full-duplex transmission mode.Adopts WDM technology and transmits and receives data over a single fiber.Extends the fiber distance up to 2 km.TL-FC311B-2 is a gigabit media converter with a gigabit RJ-45 port and a gigabit SC fiber port that can convert between electrical and optical signals. Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networking.The TL-FC311B-2 uses Wavelength Division Multiplexing (WDM) technology, which allows data to be transmitted and received at distances of up to 2 km using only a single-mode optical fiber. This saves customers half the cost of cable provisioning. TL-FC311B-2 transmits data at a wavelength of 1310 nm and receives data at a wavelength of 1550 nm on one optical fiber. Therefore, the terminal device used in conjunction with TL-FC311B-2 should transmit data with a wavelength of 1550 nm and receive data with a wavelength of 1310 nm. TP-Link Another media converter TL-FC311A-2 is one of the products that can work together with TL-FC311B-2.In addition, this media-converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for auto-MDI / MDI-X in the TX port, in which the duplex mode is automatically negotiated.

Gigabit WDM Media Converter1x Gigabit SC port1x RJ45 10/100/1000 Mbps (Auto MDI/MDIX)9/125 µm singlemode fiberUTP Cat. 5, 5e cable (max. 100m)1310 nm TX / 1550 nm RXTL-FC311B-20 is a Gigabit media converter with a Gigabit RJ-45 port and a Gigabit SC fiber port, which can convert between electrical and optical signals. Long distance fiber optic data transmission can be applied to commercial scenarios such as parking security monitoring and wireless networks.Automatically negotiates half-duplex / full-duplex transmission mode.Adopts WDM technology and transmits and receives data on a single fiber.Extends the fiber distance up to 20 km.In addition, this media converter can be used as a stand-alone device (no rack required) or with TP-Link's TL-FC1420 rack for Auto-MDI / MDI-X in the TX port, where duplex mode is automatically negotiated.

10/100 Mbps WDM Media ConverterComplies with 802.3u 10/100Base-TX, 100Base-FX standardsAuto-negotiation of Half-Duplex/Full-Duplex transfer mode9/125 µm SMF (Single-Mode Fiber)Bidirectional WDM communication on a single fiberRanges up to 20km (12.4 miles)Work with TL-FC111B-20 as a pairWhat This Product DoesTL-FC111B-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.How This Product WorksTL-FC111B-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111B-20 transmits data at 1310nm wavelength and receives data at 1550nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at a wavelength 1310nm and sending data at wavelength 1550nm.

10/100 Mbps WDM Media ConverterComplies with 802.3u 10/100Base-TX, 100Base-FX standardsAuto-negotiation of Half-Duplex/Full-Duplex transfer mode9/125 µm SMF (Single-Mode Fiber)Bidirectional WDM communication on a single fiberRanges up to 20km (12.4 miles)Work with TL-FC111B-20 as a pairWhat This Product DoesTL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.How This Product WorksTL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111A-20 transmits data at 1550nm wavelength and receives data at 1310nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at wavelength 1550nm and sending data at wavelength 1310nm.

Media set for the DNP DS-RX1 and DS-RX1 HS dye sublimation printersSize: 10x15 cm (4x6-inch), with paper and colour film for a total of 1400 prints at 10x15 cm (2x700 prints).

ROLINE Fast Ethernet converter RJ-45 - ST, loop-back These converters convert a Fast Ethernet TP port to multi-mode fibre opticRange 2 km without repeater functionConnections: RJ-45 on the TP side/ST on the fibre-optic sideColour: greyLoop-back testConfiguration: TP mode, TP duplex, TP speedDimensions: 108 x 72 x 23 mm6 LEDs: TP Speed, link/activity, power, duplex, fibre signalIncl. plug-in mains power supply (7.5 V DC, 500 mA)

ROLINE 10/100/1000Base-T to dual-speed fibre media converterEthernet fibre converter that enables connections from copper-based Ethernet devices over a fibre-optic connection.Tri-Speed 10/100/1000MBit/s copper to dual-speed 1G/100MBit/s fibre-optic conversionSupports full wire speed conversion for gigabit copper to gigabit fibre-opticComplies with the standards IEEE 802.3, 802.3u, 802.3ab, 802.3z and 802.3z.Auto-negotiationAuto MDI/MDI-X detectionSupports jumbo frame length of 9.2K bytesSupports 802.3x flow controlLED display unit: power status, per port: fibre speed/link/activity, copper speed/link/activityMetal enclosureIncl. external power supply unit: 5 VDC, 1 A

This Gigabit Ethernet Media Converter by Delock can be used to expand a network with an optical fiber interface. In the SFP slot, an optional 100 Mb/s or 1 Gb/s SFP module can be used.SpecificationConnectors:1 x SFP slot for 100/1000Base-X SFP module (SFP module not included)1 x RJ45 jack for 10/100/1000 Mb/s Base-T1 x DC female 5.5 x 2.1 mm (power)Data transfer rate up to 1 Gb/s6 LEDs for status monitoringDIP-switch for configuration of LFP (Link Fault Pass Through)Supports IEEE 802.3 / 802.3u / 802.3ab / 802.3zPower consumption: 2.5 WMetal housingFanlessOperating temperature: 0 °C ~ 55 °CDimensions (LxWxH): ca. 94 x 70 x 26 mmPower supply specificationWall power supplyInput: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.2 AOutput: 5 V / 1 AGround outside, plus insideDimensions:inside: ø ca. 2.1 mmoutside: ø ca. 5.5 mmlength: ca. 9.5 mmSystem requirements100/1000Base-X SFP moduleDevice with one free RJ45 portPackage contentMedia ConverterPower supplyUser manual

Media converter 1000Base to SFPThis Delock Gigabit Ethernet media converter can be used to extend your network by one optical fibre connection.Any optional Delock 1-Gb/s SFP module can be used in the SFP slot.Technical data• Connectors: SFP slot for 1-Gb/s SFP module (SFP module not included) RJ45 connection for 10/100/1000 Base-T• Data transfer rates of up to 1 Gb/s• 6 LEDs for status monitoring• Power supply via supplied 5-V power supply unit• Power consumption: 2.5 W• Dimensions: (LxWxH): approx. 95 x 70 x 26 mmPower supply unit specification• Plug-in power pack• Input: AC 100 ~ 240 V/50 ~ 60 Hz/0.25 A• Output: 5 V/1.25 A• Earth outside, positive inside• Dimensions: Interior: ø approx. 2.1 mm Exterior: ø approx. 5.5 mm Length: approx. 9.5 mmPackage contents• Media converter• Power supply unit• User manual

This 10 Gigabit Ethernet Media converter by Delock can be used to connect different media. In the SFP slot, various optional SFP+ modules up to 10 Gbps can be used.NBASE-T for higher speedThe RJ45 port is equipped with NBASE-T for higher speeds. This allows for up to 10 Gbps data transfer rate with traditional networking cables. The best possible transfer rate is set automatically.Specification Connectors: 1 x SFP slot for 10GBase-R SFP+ module 1 x 10 Gigabit LAN RJ45 jackData transfer rate: Gigabit Ethernet up to 1 Gbps NBASE-T with up to 2.5 Gbps and 5 Gbps 10 Gigabit Ethernet up to 10 GbpsSFP module not included6 LEDs for status monitoringPower consumption: max. 5 WOperating temperature: 0 °C ~ 55 °CMetal housingFanlessDimensions (LxWxH): ca. 94 x 71 x 26 mmSystem requirements 10GBase-R SFP+ modulePackage content Media converterPower supplyUser manualPower supply specification Wall power supplyInput: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.4 AOutput: 12 V / 1 AGround outside, plus insideDimensions: inside: ø ca. 2.1 mm outside: ø ca. 5.5 mm length: ca. 9.5 mmPackage White Box

This Gigabit Ethernet Media Converter by Delock can be used to connect different optical media. For example, multimode fiber can be converted to singlemode fiber. In the SFP slots, various optional 1 Gb/s SFP modules by Delock can be used.Specification • Connector: 2 x SFP slot for 1000Base-X SFP module (SFP modules not included)• Data transfer rate up to 1 Gb/s• 6 LEDs for status monitoring• Power consumption: 2.5 W• Operating temperature: 0° ~ 50° C• Metal housing• Fanless• Dimensions (LxWxH): ca. 95 x 70 x 26 mmSystem requirements • 1000Base-X SFP modulePackage content • Media Converter• Power supply• User manualPackage • White Box

This robust, industry capable Gigabit Ethernet media converter by Delock can be used to expand a network with an optical fiber interface. In the SFP slot, an optional 1 Gbps SFP module can be used.Redundant power supply with 9 V to 48 VThe switch accepts two terminal power sources, allowing it to be permanently connected to multiple power sources, enabling applications that require high availability.Specification Connectors: 1 x RJ45 jack for 10/100/1000 Mbps Base-T 1 x SFP slot for 1 Gbps SFP module 1 x 5 pin terminal power connectorData transfer rate up to 1 GbpsSupports IEEE 802.3 / 802.3u / 802.3z / 802.3ab330 m long range mode with 10 MbpsLEDs for status monitoringRedundant power supply with 9 V to 48 VPower consumption: max. 2 WRobust metal housingFanlessSuitable for 35 mm DIN railProtection class: IP40Operating temperature: -40 °C ~ 85 °CDimensions (LxWxH): ca. 116 x 85 x 33 mmSystem requirements Power supply with DC 9 V - 48 V (not included)Package content Media converterUser manualPackage White Box

This Delock Gigabit Ethernet Media Converter can be used to expand your network by an optical fiber interface. In the SFP slot, an optional 100 Mb/s or 1 Gb/s SFP module can be used. The compact dimensions allow a space-saving installation.Specification • Connector: SFP slot for 100 Mb/s or 1 Gb/s SFP modules (Dual rate) (SFP module not included) RJ45 connector for 10/100/1000Base-T• Transmission rate up to 1 Gb/s• 5 LEDs for status monitoring• DIP-switch for configuration of LFP (Link Fault Pass Through), Half- or Full-Duplex, 10/100/1000 Mb/s mode• Power supply with 3.3 V included• Robust metal housing• Power consumption: 2.3 W• Dimensions (LxWxH): ca. 74 x 51 x 20 mmSystem requirements • Device with one free RJ45 portPackage content • Media Converter• Power supply• User manualPackage • White Box

ROLINE industrial converter RJ-45, SCNetwork converter for use in industrial environmentsFull wire speed conversion of the Fast Ethernet signalAuto-negotiation 10/100Mbps or fixed setting on the copper portAuto MDI/MDI-XLink Fault Pass Through functionNumerous configuration optionsTransparent conversion of the 802.1Q VLAN packetsLow power requirementDIN rail mountingOperating voltage: +7 to +30 VDC: 2.6 W (max.)Operating temperature: -10°C to +70°CInput DC via terminal block or DC power plug (6.3mm/2.0mm)

ROLINE industrial mini converter,10/100T-100SCNetwork converter for use in industrial environmentsFull wire speed conversion of the Fast Ethernet signalAuto-negotiation 10/100Mbps or fixed setting on the copper portAuto MDI/MDI-XLink Fault Pass Through functionNumerous configuration optionsTransparent conversion of the 802.1Q VLAN packetsLow power requirementDIN rail mountingOperating voltage: +5.5 to +50 VDC: 2.6 W (max.)Operating temperature range: -20°C to +70°CInput DC via terminal block or DC power plug

ROLINE Fast Ethernet converter RJ-45 - SC, loop-backThese converters convert a Fast Ethernet TP port to multi-mode fibre opticRange 2 km without repeater functionConnections: RJ-45 on the TP side/SC on the fibre-optic sideColour: greyLoop-back testConfiguration: TP mode, TP duplex, TP speedDimensions: 108 x 72 x 23 mm6 LEDs: TP Speed, link/activity, power, duplex, fibre signalIncl. plug-in mains power supply (7.5 V DC, 500 mA)Note: similar to the illustration