396 products were found matching your search for modul in 2 shops:

Small microphone module for Arduino, analogueSpecification• power supply: 5 V / 3.3 V• analog output• high sensitivity microphone• power indicator light• frequency response range: 50 Hz - 20 KHz• impedance: 2.2 kOhm• Sensitivity: 48 - 66 dB• Polar pattern: universal• Operating temperature: -40 ... +85 C• Operating humidity: 30 - 90%.• Hole for mounting screw 3 mm.• dimensions (L x W x H): 40 x 15 x 10 mm

Warranty: 2 years Diameter [mm]: 228 Number of Teeth: 26 for components see parts list Mounting Type: not pre-mounted Content: with clutch pressure plate Content: with dual mass flywheel Content: with flywheel bolts Content: with clutch plate Content: with releaser

The sound detector is based on a microphone and a power amplifier and can be used to detect the sound level in the environment. The sensor receives the signal through both a digital and an analog output. The sensitivity can be adjusted with the potentiometer and the LEDs mounted on the PCB indicate the power and the compressor output.

Lockable flush-mounted IP44 outlet, keyed alike with two keys (identical locks and keys). Cover closes completely, even when patch cables are plugged in. For two individual modules in Modul design (not suitable for OpDAT modules). Ball-impact resistant according to DIN 18032. Can be operated with standard patch cables. With clearly visible label window. Bottom section of housing can be turned 180°, with cable feed possible from top and bottom. With space to install the required spare cable lengths.

Flush-mounted termination unit for individual modules in Modul design. Module plug direction 45° downwards. Strain relief on module. With label window for enclosed identification labels and integrated dust protection covers (also colored). Compatible with ''design'' central units of switch lines.

for: OKI B412, B432, B512, C332, C532, C542, C612, C712, C823, C833, C843, ES4132, ES5112, MC363, MC573, MC853, MC873

This module by Delock provides a USB Type-A charging port. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box.Specification • Connectors: 1 x USB Type-A female 1 x 2 pin terminal block• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.2 A• Output: 5 V / 2.1 A• Short circuit protection• For Keystone ports with 19.2 x 14.9 mm• Dimensions (LxWxH): ca. 44.8 x 32.5 x 20.7 mm Package content • Keystone module

This Easy 45 module by Delock is designed to provide two RCA female ports. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily and toolless changed if necessary.Easy 45 connects Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more.Specification Connectors: external: 2 x RCA female internal: 2 x RCA femaleMaterial: ABS plasticSuitable for module holder Delock Easy 45Suitable for 45 mm cable duct with minimum depth 45 mmModule size: 22.5 x 45 mmDimensions (LxWxH): ca. 22.5 x 45.0 x 39.0 mmColour: whiteSystem requirements A free module port Delock Easy 45Package content Easy 45 modulePackage Zip poly bag

Surface-mounted, unequipped module housing for individual modules in modul design. Solid steel sheet housing, upper part of the housing powder-coated in RAL 9010. Upper part of the housing can be put on and removed easily because no screws are used for fastening. Equipotential bonding possible by means of contact pin. Additional strain relief on lower part of housing using cable ties. Suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS. Optionally available and fits in all housings: FO extension set for module and keystone surface mount housing: 130861-MSK-E.

Surface-mounted, unequipped module housing for individual modules in modul design. Solid steel sheet housing, upper part of the housing powder-coated in RAL 9010. Upper part of the housing can be put on and removed easily because no screws are used for fastening. Equipotential bonding possible by means of contact pin. Additional strain relief on lower part of housing using cable ties. Suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS. Optionally available: FO extension set for module and keystone surface mount housing: 130861-MSK-E. Optionally available 2 x 12 housing: Strain relief for patch cords 130861-24ZE-E.

LED SMD 3 3014 module, 0.36 W, 12 V, IP65, red, 20 piecesLED-SMD 3 module with 0.36 watt power at an operating voltage of 12 V in the light color red.Features:power: 0.36 W per modulevoltage: 12Vinput power:6.8 W / 20 pcs. one-sided power supply7.2 W / 20 pieces power supply on both sidesluminous flux: 61.2 lmcolor rendering: CRI> 80color temperature: redbeam angle: 120 °protection: IP65product size: 18 mm x 8 mm

LED SMD 3 3014 module, 0.36 W, 12 V, IP65, green, 20 piecesLED-SMD 3 module with 0.36 watts of power at an operating voltage of 12 V in the light color green.Features:power: 0.36 W per modulevoltage: 12Vinput power:6.8 W / 20 pcs. one-sided power supply7.2 W / 20 pieces power supply on both sidesluminous flux: 61.2 lmcolor rendering: CRI> 80color temperature: greenbeam angle: 120 °protection: IP65product size: 18 mm x 8 mm

LED SMD 3 3014 module, 0.36 W, 12 V, IP65, blue, 20 piecesLED-SMD 3 module with 0.36 watt power at an operating voltage of 12 V in the light color blue.Features:power: 0.36 W per modulevoltage: 12Vinput power:6.8 W / 20 pcs. one-sided power supply7.2 W / 20 pieces power supply on both sidesluminous flux: 61.2 lmcolor rendering: CRI> 80color temperature: bluebeam angle: 120 °protection: IP65product size: 18 mm x 8 mm

LED SMD 3 3014 module, 0.36 W, 12 V, IP65, 6000 K, 20 piecesLED-SMD 3 module with 0.36 watts of power at an operating voltage of 12 V in the light color cold white.Features:power: 0.36 W per modulevoltage: 12Vinput power:6.8 W / 20 pcs. one-sided power supply7.2 W / 20 pieces power supply on both sidesluminous flux: 61.2 lmcolor rendering: CRI> 80color temperature: cool white 6000 Kbeam angle: 120 °protection: IP65product size: 18 mm x 8 mm

This module by Delock provides a USB Type-A charging port. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box.Specification • Connectors: 1 x USB Type-A female 1 x 2 pin terminal block• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.2 A• Output: 5 V / 1 A• Short circuit protection• For Keystone ports with 19.2 x 14.9 mm• Dimensions (LxWxH): ca. 40.4 x 32.5 x 16.7 mm Package content • Keystone module

LED 12 V SMD 3 2835 module, 1 W, IP65, red, 20 piecesLED SMD 3 module with 0.72 watts of power at an operating voltage of 12 V in the light color red.Features:nominal power: 0.72 W per moduleoperating voltage: 12 Vluminous flux: 80 lmcolor rendering: CRI> 80color temperature: redbeam angle: 160 °protection: IP65material: thermoplasticproduct size: 58 mm x 12 mm

LED 12 V SMD 3 2835 module, 1.5 W, IP65, green, 20 piecesLED SMD 3 module with 1.5 watts of power at an operating voltage of 12 V in the light color green.Features:nominal power: 1.5 W per moduleoperating voltage: 12 Vluminous flux: 120 lmcolor rendering: CRI> 80color temperature: greenbeam angle: 160 °protection: IP65material: thermoplasticproduct size: 75 mm x 15 mm

LED 12 V SMD 3 2835 module, 1 W, IP65, snow white, 20 piecesLED SMD 3 module with 0.72 watts of power at an operating voltage of 12 V in the light color snow white.Features:nominal power: 0.72 W per moduleoperating voltage: 12 Vluminous flux: 80 lmcolor rendering: CRI> 80color temperature: snow whitebeam angle: 160 °protection: IP65material: thermoplasticproduct size: 58 mm x 12 mm

IP44 flat surface-mounted housing for two individual modules in Modul designIP44 protection only when closed (without plugged in patch cable)cable feed for one or two cables from the topbreak-proofgray color

Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards. Strain relief with cable tie at the module. With label window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored). Compatible with ''design'' central units of switch lines. Not suitable for mounting in standard flush-mounted or cavity wall casings.