30 products were found matching your search for monoxide in 2 shops:

FireAngel Carbon Monoxide Detector FA-3322-EUX10 with Color LCD Displaypowerful electrochemical CO sensor (10 years lifetime) low power consumption, 10 years battery life additional temperature display additional humidity sensor Mute and test function Acoustic and visual alarm indication built-in loud alarm: 85 dB (A) at 3 mVisualized plain text displays Color LCD display The FireAngel Carbon Monoxide Detector FA-3322-EUX10 with color LCD display detects and recognizes even very small amounts of carbon monoxide in the ambient air. Response thresholds according to EN 50291 in ppm = parts per million50 ppm triggering after 60-90 min.100 ppm triggering after 10-40 min. 300 ppm triggering Technical data:Sensor type: electrochemicalResponse thresholds according to EN 50291 Acoustic and optical alarm indication Alarm volume: 85 dB (A) at 3 mColor LCD display Battery life: 10 yearsPermanently sealed lithium battery Installation: wall mountingOperating temperature: -10°C to +40°CMaterial: PC + ABSDimensions: 129 x 76 x 31 mmWeight: 121 gramsCertification: EN 50291- 1 and EN50291-2, CE certified

FireAngel carbon monoxide detector FA-3820 -EUX10 with fixed 10 year batteryPowerful electrochemical CO sensor (10 years lifetime) Low power consumption, 10 years battery life Mute and test function Audible and visual alarm indication Built-in loud alarm generator: 85 dB (A) at 3 mLED indicators for alarm / fault and operation. Carbon monoxide is a dangerous respiratory poison and is produced by the incomplete combustion of fossil fuels such as oil, gas, wood, coal pallets, etc. The CO detector provides early warning of CO poisoning and triggers a loud audible and visual alarm. The response thresholds for CO detectors are defined and prescribed in EN standard 50291. Response thresholds according to EN 50291 in ppm = parts per million50 ppm Triggering after 60-90 min.100 ppm triggering after 10-40 min. 300 ppm trip Technical data:Sensor type: electrochemicalResponse thresholds according to EN 50291 Acoustic and optical alarm indication Alarm volume: 85 dB (A) at 3 mBattery life: 10 yearsPermanently sealed lithium battery Installation: wall mountingOperating temperature: -10°C to +40°CMaterial: PC + ABSDimensions: 125 x 67 x 33 mmWeight: 95 gramsCertification: EN 50291- 1 and EN50291-2, CE certified

FireAngel carbon monoxide detector FA-3313-EUX10 with replaceable 1.5 V AA batteriesPowerful electrochemical CO sensor (10 years lifetime) Replaceable 1.5 V AA batteries (included)Mute and test function Audible and visual alarm indication Built-in loud buzzer: 85 dB (A) at 3 mThe FireAngel Carbon Monoxide Detector FA-3313-EUX10 with replaceable 1.5 V AA batteries detects and recognizes even very small amounts of carbon monoxide in the ambient air. Response thresholds according to EN 50291 in ppm = parts per million50 ppm triggering after 60-90 min.100 ppm triggering after 10-40 min. 300 ppm triggering Technical data:Sensor type: electrochemicalResponse thresholds according to EN 50291 Audible and visual alarmAlarm volume: over 85 dB (A) at 3 mPower source: replaceable 1.5 V AA batteries Installation: wall mountingOperating temperature: -10°C to +40°CMaterial: PC + ABSdimensions: 119 x 62 x 38 mmWeight: 128 gramsCertification: EN 50291- 1 and EN50291-2, CE certified

FireAngel Smoke & Carbon Monoxide Alarm FA-SCB10-INT1 warning detector against 2 deadly hazards: advanced optical smoke sensor to minimize false alarms innovative electrochemical carbon monoxide sensor for better detection of CO, both sensors work independently of each otherloud alarm generator 85 dB-ASealed 3V lithium battery with 10 year lifetimelarge test & mute buttonThe FireAngel FA-SCB10-INT Combined Smoke & Carbon Monoxide Alarm is an easy-to-install combination detector designed to protect occupants from fire and CO. It is ideal for protection in bedrooms and living areas. The device has both smoke and carbon monoxide sensors to detect both hazards. It has clear indicators and warnings so you can see which hazard is acute when the alarm sounds. The smoke & carbon monoxide detector has a sealed 3V lithium battery with a 10 year life.Dimension: 134mm (diameter) x 39.4mm depthBattery: Sealed 3V lithium battery 10 years lifetimeTechnology: Optical (smoke), electrochemical (carbon monoxide- CO)Alarm sound level: 85dB(A) at 3m (minimum)Installation: ceiling/wallOperating temperature: 0°C to +40°CMaterial: ABS, UL94 VO fire retardantManufacturer warranty: 3 yearsWeight: 0,200 kgCertified according to: EN14604:2005+AC:2008 / EN 50291-1:2018

Tamperproof, sealed ten-year lithium batterySensor service life: ten yearsQuick and easy to installWireless networking with W2 wireless components such as smoke detectors, CO detectors, heat detectors or FireAngel Connect (W2 wireless module not included, order separately: FIREANGEL W2)Compatible with FireAngel W2 wireless module, Z-Wave or ZigBee module (W2 wireless module not included, order separately: FIREANGEL W2)Particularly resistant to household loadsEnd-of-life display for when the detector operating life endsin ppm = parts per million- 50 ppm resolution after 60 - 90 minutes- 100 ppm resolution after 10 - 40 minutes - 300 ppm resolution < 3 minutes

CO GAS ALARM GX-C1proThis CO detector with internal sensor ensures optimum detection of toxic CO gases and is the minimum standard as an indispensable safety device in almost every household with a fireplace! Simply plug the GX-C1pro CO detector with internal sensor into a socket at medium room height or at the average nose height of the main occupancy position, thus eliminating the need for any installation work. The GX-C1pro works strictly in accordance with DIN EN 50291, has a maintenance-free electro-chemical sensor and an additional test button as well as 3 LEDs for operation, fault and alarm. The measuring cell, evaluation and software have been tested by TÜV Süd. This system already sounds the alarm at CO gas concentrations that are far below dangerous levels. You are warned twice, with a visual and a loud acoustic signal. Thanks to the high sensitivity of the electro-chemical sensor and the delay times specified in the DIN EN 50291 standard on the one hand and the dispersion properties of carbon monoxide in the room on the other, the positioning of the warning device is no longer as crucial as it used to be with the catalytically heated sensors. Just take the middle sockets, whether they are at 1m, 1.50m or 1.80m is not so critical.TÜV full test of the measuring cell according to DIN EN 50291Sensor, measuring cell, evaluation TÜV-testedSimple installation in secondsAcoustic and visual warningIntegrated test button for LEDs and piezoAutomatic sensor self-test every 24 hours, so no need to check with gasLow cross-sensitivity, therefore no false alarmsDetection of carbon monoxide (CO) in accordance with DIN EN 50291Possible applicationsMonitoring of carbon monoxide leaks at combustion sites in apartments, houses, stores, small businesses, cafés, low-dust workshopsMonitoring of all systems operated with gascan be used for gas boilers, gas heating, gas stoves, gas ovens, but also oil heaters and open fires, even in bathrooms and other damp rooms, as long as moisture does not condensedesigned for years of continuous operation

GX-K1 gas alarm with internal sensoraudiovisual warning (LED and loud piezo sound)Detects a variety of fluorinated refrigerants (HFCs)R-22, R-32, R-404a, R-410a, R-1234yf and many other HFCsCross-sensitivity to methane, butane, propane (R-290), ethanol, hydrogen and many moreIdeal for the operation of private air conditioning systemsVery simple sensor test with gas from lighterSensor service life up to approx. 5 years, external sensor can be replaced by the user himselflow-cost replacement possible with internal sensor from Elektrotechnik SchabusMost coolants and refrigerants are toxic, many are flammable and others also have a high GWP (= global warming potential), i.e. they are extremely harmful to the climate. A leak in the coolant line is usually noticed quickly, the cooling function is then no longer given, so thermometers are more helpful than coolant warning devices. However, the leaking coolant, which evaporates quickly due to its properties, should not be inhaled under any circumstances. This is precisely the purpose of the refrigerant sensors with the GX-K1 (int. sensor) and GX-K2 (ext. sensor) socket warning devices. These are warning devices that are primarily designed to protect human health. They are set very sensitively according to their purpose and also have cross-sensitivities to some flammable gases. For example, they can easily be tested for their function with the depressurized gas of a standard lighter, because R-290 is nothing other than propane, which is often used as a refrigerant in heat pumps. R-22, R-32, R-404a, R-410a, R-1234yf and many other HFCs can be detected with the GX-K1 and K2, with R-32 defined as the target gas. The sensor also has cross-sensitivity to methane, butane, propane (R-290), ethanol, hydrogen and other hydrocarbons.Possible applicationsheat pumpsair conditioning systemsCoolants and refrigerantsFluorocarbon

GLORIA CO detector type KO1Carbon monoxide, which is deadly in high concentrations, is detected by state-of-the-art electrochemical sensor technology even at low concentrations and signaled acoustically.Power supply2 x AA quality batteries (included in package contents), battery can be replaced after expiry of service life.TÜV certified according to EN50291:2018, CE tested and certified.Color: whiteWith three LED indicators:Green = ready for operationYellow = FaultRed = Alarm conditionWith function key for test and resetVisual and audible indication at the end of the detector's service lifeWarning tone: min. 85dBA/3mHeight/width/depth approx. in mm: 65 / 61 / 38Weight: approx. 110g (without packaging)Temperature range: -10° to +40°CPackage contents:CO detectorbatteriesMounting material German operating instructionsATTENTIONCO detectors are not to be used as smoke detectors!

CO Gas Detector with LED DisplayIncrease your safety at home with this CO detector. Carbon monoxide (CO) is a dangerous, colorless and odorless gas that cannot be perceived by humans.CO detectors are needed when using such things as fireplaces, gas stoves, gas furnaces, oil, wood or tile stoves, and attached garages.This life-saving device is tested according to the strict, current standard EN 50291.As a minimum protection, a CO detector should be installed in every room where a fuel appliance is located. In addition, we recommend using one CO detector per bedroom.Alerts to elevated levels of carbon monoxide in the room airHigh accuracy and sensitivityLED display for CO concentration (3 digits)Alarm volume min. 85 dBAlarm memory functionWarning indicators for: low battery, sensor error, battery removal, end of instrument lifeTest/mute function/manual resetIncl. 2x 1.5V AAA battery Power supplyBattery: 2x 1.5V AAA (included)Package contents:1x C11-L11x mounting material1x user manual2x AAA battery

GLORIA carbon monoxide detector type KO10D with sealed battery and displayThe carbon monoxide, which is lethal in high concentrations, is detected by the latest electrochemical sensor technology even at low concentrations and is signaled acoustically and visually.With digital display and event memory (peak value of the measured CO content in ppm can be called up since the last reset).Color: WhiteManufacturer's warranty: 10 years from activation3V lithium battery, permanently installed.With mounting plate and fixing material. Operating instructions in German.Certified according to BSI EN 50291-1 : 2018With three LED indicators: Green = ready for operation Yellow = fault Red = alarm statusTest/reset button, low battery warning signal.Warning tone: 85dBa / distance: 3mHumidity range up to 90% Temperature range: 0° to +40° CCarbon monoxide (CO for short) is a dangerous respiratory poison that cannot be seen, smelled or tasted. CO detectors should be installed in every room with ''fuel-operated'' appliances such as gas boilers, oil heaters or fireplaces in order to detect an increased concentration of this dangerous respiratory poison at an early stage.The alarms should also be installed in rooms where people spend long periods of time (e.g. living room, bedroom)

GLORIA carbon monoxide detector KO2DCarbon monoxide detector GLORIA KO2D with displayBSI-certified according to EN50291-1:2018 and EN50291-2:2020-10 (homes and boats), CE tested and certified Carbon monoxide, which is fatal in high concentrations, is detected and reported visually and audibly by the most modern electrochemical sensors - even at low concentrations.With a digital display and event memory (peak value of the measured CO content in ppm since last reset can be called up).Power supply: 2x high-quality AA batteries (included in delivery), battery can be changed after the end of their service lifeWith two LED displays: Green = ready for operationYellow = disruptionRed = alarm conditionWith two function keys for test/reset and peak value display since last resetVisual display at the end of the detector's service lifeWarning tone: at least 85 dBA/1 mHeight/width/depth approx. in mm: 71/118/40Weight: approx. 120 g (without packaging)Temperature range: 0°C to +40°CIncludes mounting material and operating instructions in German.

Smoke & Carbon Monoxide Alarm Battery operatedBattery life up to: 10 yearsEN 14604 / EN 50291With test button85 dBABSWhiteThis modern designed combination detector from Nedis© detects both smoke and carbon monoxide (CO) to increase your safety. This detector ensures that you are alerted in time to smoke due to fire or elevated carbon monoxide levels with a loud 85 dB alarm. It features a non-removable integrated lithium battery with an estimated life of up to 10 years and a sensor with an estimated life of up to 10 years.Detects both smoke and carbon monoxide (CO) to alert you in a timely manner to smoke and elevated concentrations of carbon monoxideEN 14604- and EN 50291-certified - complies with European standardBuilt-in, non-removable lithium battery - with an estimated life of up to 10 years and warning tone when the charge is too lowReliable sensor - with an estimated life of 10 yearsPowerful alarm - with an early warning alarm of over 85 dBEasy to reach test/pause button - operable with one handEasy to install - with the included screws and bracketThe new generation optical smoke sensor responds even faster to fire, emits fewer false alarms and is very environmentally friendly. It also features a high-quality electrochemical sensor that continuously measures the concentration of carbon monoxide in the air. Carbon monoxide is deadly, odorless and invisible, making it undetectable without a detector. This dangerous gas is caused by incomplete combustion and can occur near your boiler, geyser or chimney. It complies with the required European standards EN 14604 and EN 50291.We strongly recommend that you regularly check that it is working properly. For convenience, this smoke detector has a large button on the front to test the alarm.Package Contents:Combination detectorMounting materialQuick installation guide

10-Year Battery Standalone Carbon Monoxide AlarmSensor Type: ElectrochemicalAlarm Type: CO alarm, fault alarm, low battery warningAlarm Volume: Over 85dB (A) at 3 m (9.84 ft)Alarm Mode: Visual and audible alarmPower source: 3V CR123A lithium battery (replaceable)Indoor use onlyDahua Wisualarm Standalone Carbon Monoxide Alarm is designed to continuously monitor Carbon Monoxide concentration. Adopting advanced electrical technology, a built-in high-volume buzzer, it responds quickly and becomes highly sensitive with stable performance and low false alarm. Once the surrounding Carbon Monoxide concentration reaches the alarm value, it will promptly send out an audible and visual alarm signal to remind the user to take immediate measures.

CC-4100 Carbon Monoxide Alarmelectrochemical sensor with 10 years lifetimewith LED displaytested according to EN 50291-1:2018self-test function and mute functioncompact designcentral test buttonbatteries included in package contentsintegrated warning tone: 85 dB(A)dimensions: 11,9 x 7,9 x 3,0 cmautomatic brightness adjustment of the power indicatorWhen the carbon monoxide detector or CO alarm detects potentially dangerous CO concentrations, the red LED immediately starts flashing and the alarm beeps. If the CO concentration does not drop below 40 ppm, this condition is maintained. In addition, the current carbon monoxide concentration appears in the display.Package contents:1x Cordes carbon monoxide alarm / CO detector CC-4100.2x battery (Mignon/AA)1x mounting material1x instruction manual

Carbon monoxide alarm Battery operatedBattery life up to: 5 yearsEN compliant: EN 50291With test button85 dBWhiteThis CO detector from Nedis© with display detects carbon monoxide (CO) to increase your safety and quickly displays the current value. This detector ensures that you are alerted in time to elevated carbon monoxide levels with a loud 85 dB alarm. It is equipped with a battery with an estimated life of up to 5 years and a sensor with an estimated life of up to 10 years.Detects carbon monoxide (CO) to ensure you are alerted in a timely manner to elevated concentrations of carbon monoxideEN 50291 certified - complies with European standard2 alkaline batteries included - with an estimated life of up to 5 years and warning tone when the charge is too lowDigital display - to show the current valueReliable sensor - with an estimated life of 10 yearsPowerful alarm - with an early warning alarm of over 85 dBEasy to reach test button - can be operated with one handEasy to install - with the included screws and bracketPackage contents:CO detectorMounting materialQuick installation guide

Nedis SmartLife CO Detector Zigbee 3.0 Battery operated Sensor lifetime: 10 years EN 50291 Android™ / IOS With test button 85 dB White Detects carbon monoxide (CO) to ensure you are alerted in time to elevated concentrations of carbon monoxideEN 50291-certified - complies with the European standardBattery life of up to 3 years and low battery warningReliable sensor - with an estimated lifetime of 10 yearsPowerful alarm - with an early warning alarm of over 85 dBTest or mute with large button or from the appFully integrates with your Nedis SmartLife app (via the Nedis ZigBee Gateway) to combine with other smart products in automated processes to improve securityEasy to install - with the included screws and bracket The Nedis Smart ZigBee CO detector is a compact, wall-mounted carbon monoxide (CO) detector that provides enhanced safety. With its high sensitivity, the sensor can detect minimal levels of carbon monoxide (CO) and ensure that you are alerted in time with a loud 85 dB alarm in case of elevated concentrations of carbon monoxide. You will also receive a notification on your cell phone. In this way, you will be informed even if you do not hear the alarm, for example, because you are not at home. The detector can also be connected to other Nedis SmartLife products. This way, you can automatically turn on all smart lights in case of an alarm. For this you need the Nedis ZigBee Gateway (Wi-FiZBxxx) app and the free NEDIS ® SmartLife app.Notes on CO gas (carbon monoxide)Keeping you and your family protected at home and sleeping with peace of mind. Carbon monoxide is deadly, odorless and invisible, making it undetectable without a detector. This dangerous gas is caused by incomplete combustion and can occur near your boiler, geyser or chimney. The detector complies with the required European standard EN 50291.The detector has a test button for periodic testing, a mute button to silence the alarm for 5 minutes when the situation is under control, a low battery alarm (after about 3 years) and an end of life warning (after about 10 years), both of which are visually indicated with LEDs on the detector as well as in the Nedis SmartLife app.The detector is battery powered and comes with screws and anchors so you can easily install it anywhere you want maximum security, whether it's in a child's room, attic, or kitchen.Important: This product contains highly sensitive components. Always make sure to store and/or use the device only in working environments with a temperature between -10 and 40 °C.

The MQ7 sensor has a high sensitivity and selectivity, which enables it to effectively detect and measure carbon monoxide concentrations. This makes it an important tool for applications such as gas leak detection, safety systems and environmental monitoring. By interfacing the MQ7 sensor with suitable electronic circuits and microcontrollers such as Arduino (or a compatible board such as Dasduino), systems can be created that enable real-time monitoring and provide prompt alerts in the event of dangerous CO concentrations. It is necessary that the sensor needs some time to warm up in order to function correctly.The breakout board works with both digital (DO) and analog (AO) signals. The digital output signal is obtained by setting a threshold value with a potentiometer. The analog output signal depends on the intensity of the gas.Technical dataDetects: Carbon monoxide (CO)Voltage: 5 Vdigital output: 0 V / 5 Vanalog output: 0 .. 5 VLM393 comparatorDimensions: 22 x 38 mmExternal linkshttps://github.com/SolderedElectronics/CO-sensor-MQ7-breakout-hardware-design

The MQ7 sensor has a high sensitivity and selectivity, which makes it capable of effectively detecting and measuring carbon monoxide levels. This makes it an important tool for applications such as gas leak detection, safety systems and environmental monitoring. By integrating the MQ7 sensor with suitable electronic circuits and microcontrollers such as Arduino (or a compatible board such as Dasduino), systems can be created that enable real-time monitoring and provide prompt warnings of dangerous CO levels. A short warm-up time is required to ensure correct operation.The breakout board provides digital and analog information via the easyC system. The sensor values are received by easyC.Technical dataDetection of carbon monoxide (CO)Voltage: 3.3 VOutput: digitalATTiny404 microcontroller integratedeasyC/Qwiic compatibilityDimensions: 54 x 22 mmeasyCeasyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ''Data sheets''.External linkshttps://github.com/SolderedElectronics/CO-sensor-MQ7-breakout-with-easyC-hardware-design

application: Xenon starter Performance: Xenon ballast Fitting Position: Left and right Guarantee: 2 years Bulb Type: Xenon Supplementary Article/Info 2: Controller / Software must NOT search / be updated Light Design: Xenon Voltage [V]: 12 Assy./disassy. by qualified personnel required! SVHC: 1317-36-8: Lead monoxide (lead oxide) SVHC: 7439-92-1: loodchromaat

application: Xenon starter Bulb Type: Xenon Guarantee: 2 years Fitting Position: Left and right Supplementary Article/Info 2: with adapter Rated Voltage [V]: 12 Supplementary Article/Info 2: Controller / Software must NOT search / be updated Light Design: Xenon SVHC: 1317-36-8: Lead monoxide (lead oxide) SVHC: 7439-92-1: loodchromaat