772 products were found matching your search for printing in 2 shops:

This rectangular coffee table with rainbow printing on the top has a modern, elegant look and feel, and will complement the furniture in your house. It can be used as a coffee table or as a side table. The tabletop glass is tempered for safety, and the table is easy to clean with a damp cloth. The

Printing calculator for semi-professional useGeneral information:12-digit Digitron displaySize (H x W x D): 6.5 x 19.5 x 31.3 cm (incl. paper holder)Paper width 58 mmPrint speed: 2.0 lines/sec.Two-colour printing (IR-40T)Mains operation (AD-A 60024)Weight: approx. 620 gFeatures:Profit calculations (cost, sell, margin)Tax calculationPercentage/delta percentage calculationItem counterMark-up/mark-downAverage calculationFloating-point and fixed-point calculation (0, 2, 3, ADD2)Quick correction keyThousands separatorDouble zero keyFull memoryGT memoryAutomatic rounding F, 5/4Check and correct function (150 steps)After-print function (option to print a calculation after entering all operations [max. 150 steps])Re-print function (option to print a calculation [max. 150 steps] as often as desired)Time and date print/display

This rectangular coffee table with telephone booth printing on the top has a modern, elegant look and feel, and will complement the furniture in your house. It can be used as a coffee table or as a side table. The tabletop glass is tempered for safety, and the table is easy to clean with a damp

Advanced printing calculator with a 12-digit display, printing speed of 2.0 lines/sec., two-colour printing and advanced business functions.Brief description12 digitsKeys: plasticPower supply: AC adapter and backup batteryWeight (g): 740Dimensions (mm): 255 x 190 x 70FeaturesKeys: %, 00, difference in percent2-colour printing3-key memoryTax calculation (TAX+, TAX-)Mark-up (MU) and grand total (GT) functionsItem counter (IC), currency calculationRounding selector (5/4)Decimal selector (A, 0, 2, 4, 6, F)Correction function

Portable printing desktop calculatorPrint: ink roller, colour: blue, IR 4012-digit LCD displayPrint speed 1.6 lines/secondPaper roll width: 57 mm, diameter 65 mm, (max. 110 mm)Roll paper diameter Tax invoicePercentage calculationMemory functionDisplay/Print selector buttonAutomatic switch-offProfit margin calculation (cost-sell-margin)Delete the last digitRounding buttonPower supply: 4 x AA batteries (included), optional power supply unit

The elegant compact calculator with ink roller printing unit (two-colour) for medium-duty use.12-digit large LCD display (liquid crystal)Serial printing unit, 2.4 lines/second57-mm-wide rollerInk roller, blue/redFour memory buttonsPercentage function and delta percentageMargin/offset and progress payment invoiceAutomatic VAT functionCurrency conversion (memory space for 13 exchange rates)Automatic rounding, 5/4Decimal code A, 0, 2, 3, 4, F00 buttonEntry counterGrand total/final totalIndividual correction/deletion of last digitIdentifier button # (invoice number, date etc.)ConversionMains connectionDimensions (WxDxH): 200 x 235 x 50 mm/weight: 795 g

Professional network label printer with Bluetooth and red/black printingThe Brother QL-820NWB is a professional network label printer with a Bluetooth interface. The highlight is its red/black printing function. Label templates loaded onto the device can be accessed via the display and then printed using the standalone procedure.Red/black printing with the DK-22251Interfaces: USB, WLAN, LAN, connection to tablet/mobile, BluetoothBacklit graphic LCDFeatures: Automatic cutting unit, multi-row display, time and date function, label templates (possibly only via PC software)Barcode printing, banner printing, multi-line printing, mirror-image printingMaximum label width: 62 mmPrint up to 110 labels per minuteCompatible with iPrint & Label app

Professional Wi-Fi label printer with red/black printing functionThe Brother QL-810W is a professional Wi-Fi label printer. The highlight is its red/black printing function. The model has a Wi-Fi interface, meaning it can be used via a smartphone/tablet, for example. Red/black printing with the DK-22251Interfaces: USB, Wi-Fi, connection to tablet/mobilePrint up to 110 labels per minuteFeatures: Automatic cutting unit, time and date function, label templates (possibly only via PC software)Printing functions: Barcode printing, banner printing, multi-line printing, mirror-image printingMaximum label width: 62 mmNo software or driver installation requiredCompatible with iPrint & Label app

The FabConstruct PTFE tubing is ideal for feeding filament into your 3D printer.Due to its low coefficient of friction and high heat resistance, the filament is transported without any jams.You can cut the bulk goods to the desired length with a sharp knife.Compatible with: 2.85-mm filament diameterInner diameter: 3.0 mmOuter diameter: 5.0 mmColour: naturalTechnical data:Tear resistance: 220 kp/cm²Elongation at break: 350%Melting point: 327 °CMax. operating temperature: +260Min. operating temperature: -200Flame retardancy: excellentWeather resistance: excellentResistance to org. solvents: excellentResistance to acids and alkalis: excellentUV resistance: excellent

The FabConstruct PTFE tubing is ideal for feeding filament into your 3D printer.Due to its low coefficient of friction and high heat resistance, the filament is transported without any jams.You can cut the bulk goods to the desired length with a sharp knife.Compatible with: 2.85-mm filament diameterInner diameter: 3.0 mmOuter diameter: 5.0 mmColour: naturalTechnical data:Tear resistance: 220 kp/cm²Elongation at break: 350%Melting point: 327 °CMax. operating temperature: +260Min. operating temperature: -200Flame retardancy: excellentWeather resistance: excellentResistance to org. solvents: excellentResistance to acids and alkalis: excellentUV resistance: excellent

Spare extruder nozzles for FlashForge Adventurer 5M seriesCompatible with the following modelsFlashForge Adventurer 5MFlashForge Adventurer 5M Pro

The FabConstruct PTFE tubing is ideal for feeding filament into your 3D printer.Due to its low coefficient of friction and high heat resistance, the filament is transported without any jams.You can cut the bulk goods to the desired length with a sharp knife.Compatible with: 1.75-mm filament diameterInner diameter: 2.0 mmOuter diameter: 4.0 mmColour: naturalTechnical data:Tear resistance: 220 kp/cm²Elongation at break: 350%Melting point: 327 °CMax. operating temperature: +260Min. operating temperature: -200Flame retardancy: excellentWeather resistance: excellentResistance to org. solvents: excellentResistance to acids and alkalis: excellentUV resistance: excellent

Nozzle assemblyVersion: leftBore size: 0.8 mmSuitable for: FlashForge Creator 3 Pro

Nozzle assemblyVersion: leftBore size: 0.6 mmSuitable for: FlashForge Creator 3 Pro

Transparente, milchfarbene Folien aus Polyethylen niedriger Dichte. Speziell für die Herstellung von kundenspezifischen Formen für Gießharz entwickelt. Diese Platten können auch für den Prototypenbau, den Modellbau und das Gießen aus vielen anderen Materialien verwendet werden.Ein Mayku Heat Shield ist für Harzfolien unerlässlich, um gleichmäßiges Heizen zu gewährleisten.

The BCN3D hotends are the second, revised version of the BCN3D printer nozzles.The hotends are compatible with the BCN3D R19 as standard, but are also backwards compatible with the older versions of the printer. The printer nozzles are available in different diameters. The standard brass nozzles are available in diameters 0.3 mm, 0.4 mm, 0.6 mm, 0.8 mm and 1.0 mm. The finer nozzles are suitable for smaller detailed models and the larger nozzle diameters for a faster printing process.For abrasive materials such as carbon fibre, fibreglass materials and many more, we recommend the hardened steel hotend (only 0.5 mm).

Special features:Quick and easy material handlingHumidity controlContinuous printingThe Ultimaker S5 is the innovative material solution for industrial FDM 3D-printing.The Ultimaker Material Station is a filament box that can house up to six coils at once. The filament columns can be loaded and unloaded automatically via the intelligent connection to the Ultimaker S5 3D printer. This ensures that as soon as a filament coil used in the print job becomes empty, a new equivalent can be automatically reloaded without user intervention. The Material Station thus frees up new capacities for a better-automated printing process in FDM 3D printing. Up to six coils can be charged at the same time thanks to the convenient front flap. A conveyor system moves the coils into the correct position so that the materials are ready for use. Using both the 750 g coils and the Material Station is recommended.

Spare part for Polysher

For an optimised printing processThe maintenance kit for the Ultimaker 3 has been specially designed to optimise the 3D-printing process and brings together the most important replacement parts for the Ultimaker 3 and Ultimaker 3 Extended.Included in delivery2x Bowden tube2x Bowden tube1x glass plate1x hex screwdriver 2.05x silicone nozzle cover4x clamp clip4x tube coupling collet2x build plate clamp1x Ultimaker 3 cleaning filament1x axial fan2x radial fan

Replacement tank for Nobel 1.0/1.0A 3D printer