434 products were found matching your search for reference in 3 shops:

AMD Radeon RX 7900 XT Reference Model 20GB GDDR6

Ultra low-power, low-cost comparator with 2% referenceHousing: DIP-8

The SCD4x CO2 gadget is a simple reference design PCB that demonstrates the outstandingperformance and ease of use of Sensirion's SCD4x CO2 sensor product line. It is equipped with an LEDthat indicates indoor air quality based on the measured CO2 concentration. It also features a BluetoothLow Energy module that enables communication with Bluetooth Low Energy (BLE) enabled devices such assmartphones. Power is supplied via a standard USB interface.CO2 sensor : SCD41compact form factorLED to indicate indoor air quality

miniDSP UMIK-2 USB Reference Measurement Microphone (w/Tripod), B

Warranty: 2 years Fuel Type: Petrol Manufacturer Restriction: MAGNETI MARELLI Part number of recommended accessories: 2250259

The TS431 is a three-port, low-voltage, adjustable shunt voltage reference. The output voltage can be adjusted via two external resistors to any value between Vref(1.24 V) and 6 V. The TS431 can operate at a lower voltage (1.24 V) and a lower cathode current than the widely used TL431 and TL1431 shunt voltage references. When controlling an optocoupler, the TS431 is particularly suitable for the control of 3.3 V switching power supplies.

The TS431 is a three-port, low-voltage, adjustable shunt voltage reference. The output voltage can be adjusted via two external resistors to any value between Vref(1.24 V) and 6 V. The TS431 can operate at a lower voltage (1.24 V) and a lower cathode current than the widely used TL431 and TL1431 shunt voltage references. When controlling an optocoupler, the TS431 is particularly suitable for the control of 3.3 V switching power supplies.

The TS431 is a three-port, low-voltage, adjustable shunt voltage reference. The output voltage can be adjusted via two external resistors to any value between Vref(1.24 V) and 6 V. The TS431 can operate at a lower voltage (1.24 V) and a lower cathode current than the widely used TL431 and TL1431 shunt voltage references. When controlling an optocoupler, the TS431 is particularly suitable for the control of 3.3 V switching power supplies.

Adjustable precision shunt regulatorHousing: TO-92Bandgap: 1%

The TS431 is a three-port, low-voltage, adjustable shunt voltage reference. The output voltage can be adjusted via two external resistors to any value between Vref(1.24 V) and 6 V. The TS431 can operate at a lower voltage (1.24 V) and a lower cathode current than the widely used TL431 and TL1431 shunt voltage references. When controlling an optocoupler, the TS431 is particularly suitable for the control of 3.3 V switching power supplies.

The REF01 and REF02 are precision voltage references that are pretrimmed to within ±3% of +10V and +5V, respectively. Both references feature excellent temperature stability (as low as 8.5 ppm/°C worst case), low current drain, and low noise. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. Both devices are available in the space-saving SO package, as well as in the standard 8-pin TO-99 and MINI-DIP packages.

Precision voltage reference• 2.5/3.0 V• Housing: DIP-8

The TS431 is a three-port, low-voltage, adjustable shunt voltage reference. The output voltage can be adjusted via two external resistors to any value between Vref(1.24 V) and 6 V. The TS431 can operate at a lower voltage (1.24 V) and a lower cathode current than the widely used TL431 and TL1431 shunt voltage references. When controlling an optocoupler, the TS431 is particularly suitable for the control of 3.3 V switching power supplies.

The precision and micropower voltage references MAX6190-MAX6195/MAX6198,Low dropout voltage references provide high initial accuracy and very low temperature coefficient through a proprietary curvature correction circuit and laser-cut precision thin-film resistors.These bandgap references in series operation take a maximum of only 35-uA quiescent current, making them ideal forbattery-powered devices. They provide a supply current that is virtually immune to input voltage fluctuations. Load regulation specifications are guaranteed for source and sink currents up to 500 uA.These devices are internally compensated, making them perfect for applications requiring rapid transient vibration, and are stable at capacitive loads up to 2.2 nF.

Precision 2.5 V, 5.0 V, and 10.0 V Voltage ReferencesDescription:The REF01/REF02/REF03 series of precision voltage references provide a stable 10.0 V, 5.0 V, or 2.5 V output with minimal change in response to variations in supply voltage, ambient temperature or load conditions. The devices are available in 8-lead SOIC, PDIP, CERDIP, and TO-99 packages, as well as 20-terminal LCC packages (883 only), furthering the usability of the devices in both standard and high stress applications. With an external buffer and a simple resistor network, the TEMP terminal can be used for temperature sensing and approximation. A TRIM terminal is also provided on the device for fine adjustment of the output voltage. The small footprint, wide supply range, and application versatility make the REF01/REF02/REF03 series of references ideal for general-purpose and space-constrained applications. Newer designs should use the ADR01/ADR02/ADR03/ADR06 series of references, which offer higher accuracy and temperature stability over a wider operating temperature range, while maintain-ing full pin-for-pin compatibility with the REF01/REF02/REF03 series. This data sheet applies to commercial-grade products only. Features:• High output accuracy• Adjustable output: ± 3% minimum• Excellent temperature stability• Low noise• High supply voltage range: up to 36 V maximum• Low supply current: 1.4 mA maximum• High load-driving capability: 10 mA maximum• Temperature output functionApplications:• Precision data systems• High resolution converters• Industrial process control systems• Precision instruments• Military and aerospace applications

Precision 2.5 V, 5.0 V, and 10.0 V Voltage ReferencesDescription:The REF01/REF02/REF03 series of precision voltage references provide a stable 10.0 V, 5.0 V, or 2.5 V output with minimal change in response to variations in supply voltage, ambient temperature or load conditions. The devices are available in 8-lead SOIC, PDIP, CERDIP, and TO-99 packages, as well as 20-terminal LCC packages (883 only), furthering the usability of the devices in both standard and high stress applications. With an external buffer and a simple resistor network, the TEMP terminal can be used for temperature sensing and approximation. A TRIM terminal is also provided on the device for fine adjustment of the output voltage. The small footprint, wide supply range, and application versatility make the REF01/REF02/REF03 series of references ideal for general-purpose and space-constrained applications. Newer designs should use the ADR01/ADR02/ADR03/ADR06 series of references, which offer higher accuracy and temperature stability over a wider operating temperature range, while maintain-ing full pin-for-pin compatibility with the REF01/REF02/REF03 series. This data sheet applies to commercial-grade products only. Features:• High output accuracy• Adjustable output: ± 3% minimum• Excellent temperature stability• Low noise• High supply voltage range: up to 36 V maximum• Low supply current: 1.4 mA maximum• High load-driving capability: 10 mA maximum• Temperature output functionApplications:• Precision data systems• High resolution converters• Industrial process control systems• Precision instruments• Military and aerospace applications

Ultracompact, Precision 10.0 V/5.0 V/2.5 V/3.0 V Voltage ReferencesDescription The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V, 5.0 V, 2.5 V, and 3.0 V, respectively, band gap voltage references featuring high accuracy, high stability, and low power consumption. The devices are housed in tiny, 5-lead SC70 and TSOT packages, as well as in 8-lead SOIC version. The SOIC version of the ADR01, ADR02, and ADR03 are drop-in replacements1 to the industry-standard REF01, REF02, and REF03. The small footprint and wide operating range make the ADR01, ADR02, ADR03, and ADR06 references ideally suited for general-purpose and space-constrained applications. With an external buffer and a simple resistor network, the TEMP pin can be used for temperature sensing and approximation. A TRIM pin is provided on the devices for fine adjustment of the output voltage. The ADR01, ADR02, ADR03, and ADR06 are compact, low drift voltage references that provide a stable output voltage from a wide supply voltage range. The devices are available in 5-lead SC70 and TSOT packages and an 8-lead SOIC package with A, B, and C grade selections. All devices are specified over the extended industrial (-40°C to +125°C) temperature range. The ADR01, ADR02, ADR03, and ADR06 A grade in 8-lead SOIC are qualified for automotive applications.Features • Ultracompact SC70 and TSOT packages• Low temperature coefficient- 8-lead SOIC: 3 ppm/°C typical- 5-lead SC70: 9 ppm/°C maximum- 5-lead TSOT: 9 ppm/°C maximum• Initial accuracy ±0.1%• No external capacitor required• Low noise 10 µV p-p, 0.1 Hz to 10.0 Hz (ADR02)• Wide operating range:- ADR01: 12.0 V to 36.0 V- ADR02: 7.0 V to 36.0 V- ADR03: 4.5 V to 36.0 V- ADR06: 5.0 V to 36.0 V• High output current 10 mA• Wide temperature range: -40°C to +125°C• ADR01/ADR02/ADR03 pin compatible to industry- standard REF01/REF02/REF03• ADR01, ADR02, ADR03 and ADR06 SOIC (A grade) qualified for automotive applications

Precision 2.5 V, 5.0 V, and 10.0 V Voltage ReferencesDescription:The REF01/REF02/REF03 series of precision voltage references provide a stable 10.0 V, 5.0 V, or 2.5 V output with minimal change in response to variations in supply voltage, ambient temperature or load conditions. The devices are available in 8-lead SOIC, PDIP, CERDIP, and TO-99 packages, as well as 20-terminal LCC packages (883 only), furthering the usability of the devices in both standard and high stress applications. With an external buffer and a simple resistor network, the TEMP terminal can be used for temperature sensing and approximation. A TRIM terminal is also provided on the device for fine adjustment of the output voltage. The small footprint, wide supply range, and application versatility make the REF01/REF02/REF03 series of references ideal for general-purpose and space-constrained applications. Newer designs should use the ADR01/ADR02/ADR03/ADR06 series of references, which offer higher accuracy and temperature stability over a wider operating temperature range, while maintain-ing full pin-for-pin compatibility with the REF01/REF02/REF03 series. This data sheet applies to commercial-grade products only. Features:• High output accuracy• Adjustable output: ± 3% minimum• Excellent temperature stability• Low noise• High supply voltage range: up to 36 V maximum• Low supply current: 1.4 mA maximum• High load-driving capability: 10 mA maximum• Temperature output functionApplications:• Precision data systems• High resolution converters• Industrial process control systems• Precision instruments• Military and aerospace applications

Precision 2.5 V, 5.0 V, and 10.0 V Voltage ReferencesDescription:The REF01/REF02/REF03 series of precision voltage references provide a stable 10.0 V, 5.0 V, or 2.5 V output with minimal change in response to variations in supply voltage, ambient temperature or load conditions. The devices are available in 8-lead SOIC, PDIP, CERDIP, and TO-99 packages, as well as 20-terminal LCC packages (883 only), furthering the usability of the devices in both standard and high stress applications. With an external buffer and a simple resistor network, the TEMP terminal can be used for temperature sensing and approximation. A TRIM terminal is also provided on the device for fine adjustment of the output voltage. The small footprint, wide supply range, and application versatility make the REF01/REF02/REF03 series of references ideal for general-purpose and space-constrained applications. Newer designs should use the ADR01/ADR02/ADR03/ADR06 series of references, which offer higher accuracy and temperature stability over a wider operating temperature range, while maintain-ing full pin-for-pin compatibility with the REF01/REF02/REF03 series. This data sheet applies to commercial-grade products only. Features:• High output accuracy• Adjustable output: ± 3% minimum• Excellent temperature stability• Low noise• High supply voltage range: up to 36 V maximum• Low supply current: 1.4 mA maximum• High load-driving capability: 10 mA maximum• Temperature output functionApplications:• Precision data systems• High resolution converters• Industrial process control systems• Precision instruments• Military and aerospace applications