1364 products were found matching your search for torque in 2 shops:

Clicking torque wrench in the unmistakable Wera design. Very robust design with high accuracy according to DIN EN ISO 6789-1:2017-07. Easy setting and securing of prescribed torque value. The audible and tactile engagement when the scale values are reached also facilitates the safe adjustment of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For clockwise tightening and with 45-tooth reversible ratchet.

Guarantee: 2 years Parameter: W300 Service exchange part Diameter [mm]: 300

Variable adjustable torque limitThe right torque for every application. Accuracy ±6%, traceable to national standards (for deviation tolerances see table).Handle Torque is infinitely adjustable with the Torque-Setter adjustment tool (included). Ergonomic multi-component handle, extremely convenient to use thanks to its lightweight and compact design. Handle size optimally adapted to the torque range. Click signal upon reaching the set torque value. Compatible with all 2859 series blades.Standards DIN EN ISO 6789.Extra Supplied in a practical plastic box. Includes factory test report.Note Bit holder or blades not included.Application For controlled fastening of screws at a predefined torque, in combination with a Wiha Torque 4 mm interchangeable blade.

Click-torque C 3 set 2 for screw connections in concrete11 pieces, in surface-protecting, compact, highly robust textile box. Low volume and weight for ease of mobility1 click-torque C 3 torque wrench with reversible ratchet with 1/2'' square drive, measuring range 40 Nm - 200 Nm, accuracy ±3% of the set value, according to DIN EN ISO 6789-1:2017-07, for clockwise tighteningReversible ratchet, 45 teeth, simple adjustment and securing of the required torque value, with audible and tactile engagement when the scale values are reached (fine scale only in Newton metres)Audible and tactile trigger mechanism produced when the set torque is reached.Ergonomic 2-component handle9 socket wrench inserts 8790 C impactor and 1 short extension 8894 SC for use with corded and cordless screwdrivers (not with impact screwdrivers)Click-torque C 3 1x 1/2'', 40-200 Nm 8790 C.Impactor1x 13.0x38.0, 1x 14.0x38.0, 1x 15.0x38.0,1x 16.0x38.0, 1x 17.0x38.0, 1x 18.0x38.0,1x 19.0x38.0, 1x 20.0x38.0, 1x 21.0x38.08894 SC 1x 1/2''x125.0

For professional screwdriving/fine adjustment AND torque-controlled screwdriving. Slip-over and therefore safe torque mechanism with quick adjustment for five selectable clockwise/anticlockwise tightening torques (2.0, 3.0, 4.0, 5.0, 6.0 Nm) and a fixed position (torque lock) for unlimited loosening/tightening torques. Quick-release holder for high strength. Suitable for bits with 1/4'' hexagon drive.Torque screwdriver with fast adjustmentEasy, fast adjustment of the torque valueFixed position (torque lock) for unlimited loosening and tightening torquesSlip-over torque function for clockwise/anticlockwise tighteningEasy, fast adjustment of the selectable tightening torques (2.0, 3.0, 4.0, 5.0, 6.0 Nm)For bits with 1/4'' hexagon drive, also suitable for sockets using an adapter

Torque screwdriver set TorqueVario®-S0.8 - 5.0 Nm TORX®, TORX PLUS® 14-piece variable adjustable torque limiter, including boxThe right torque for every application. Product descriptionThe TorqueVario®-S torque screwdriver set offers the right rotation for process reliability. The tool set includes an ergonomically designed torque screwdriver handle with integrated numerical scale, ten standard bits for all applications, a bit holder and the adjustment tool. All components are conveniently and clearly arranged in a high-quality and sturdy box. The torque screwdriver covers a wide range of applications with a variable torque range of 0.8 - 5.0 Nm. A clearly audible and perceptible signal when the torque is triggered ensures a process-safe torque mechanism that protects against material damage and rework. With a tripping accuracy of +/- 6%, the torque tool meets the requirements of DIN EN ISO 6789.Accuracy±6%, traceable to national standards.HandleTorque is infinitely adjustable with the Torque Setter adjustment tool (included in delivery). Ergonomic multi-component handle, extremely handy thanks to its lightweight and compact design. Click signal upon reaching the set torque value.

Suitable for right- and left-handed tightening thanks to bi-directional captive push-through square drive Measuring range: 40 - 200 Nm, accuracy +/-3% as per DIN EN ISO 6789-1:2017-0745 teeth and 1/2-inch square drive with socket lockThe required torque value is easy to set and lock with an audible click and tactile signal when the scale torque values are reachedSafe setting of the torque value: audible click and tactile signal indicates when the set value has been reachedApplication: For right- and left-handed tighteningPrecision: Accuracy ±3% of the set value, compliant with DIN EN ISO 6789-1:2017-07Version: With 1/2-inch square drive with socket lock, bi-directional square drive for changing the tightening direction, fine-toothed ratchet mechanism, 45 teeth, desired torque value is easy to set and lock with an audible click and tactile signal when the scale torque values are reached (precision scale in newton-metres), audible click and tactile signal indicates when the set torque value has been reachedHandle:ergonomic two-component handle

Suitable for right- and left-handed tightening thanks to bi-directional captive push-through square drive Measuring range: 20 - 100 Nm, accuracy +/-3% as per DIN EN ISO 6789-1:2017-0745 teeth and 1/2-inch square drive with socket lockThe required torque value is easy to set and lock with an audible click and tactile signal when the scale torque values are reachedSafe setting of the torque value: audible click and tactile signal indicates when the set value has been reachedApplication: For right- and left-handed tighteningPrecision: Accuracy ±3% of the set value, compliant with DIN EN ISO 6789-1:2017-07Version: With 1/2-inch square drive with socket lock, bi-directional square drive for changing the tightening direction, fine-toothed ratchet mechanism, 45 teeth, desired torque value is easy to set and lock with an audible click and tactile signal when the scale torque values are reached (precision scale in newton-metres), audible click and tactile signal indicates when the set torque value has been reachedHandle:ergonomic two-component handle

Variable adjustable torque limitThe right torque for every application. Accuracy ±6%, traceable to national standards (for deviation tolerances see table).Handle Torque is infinitely adjustable with the Torque Setter adjustment tool (included in delivery). Ergonomic multi-component handle, extremely handy thanks to its lightweight and compact design. Handle size can be optimally adapted to the torque range. Click signal upon reaching the set torque value. Compatible with all 2859 series blades.Standards DIN EN ISO 6789.Extra Supplied in a practical plastic box. Includes factory test report.Note Bit holder and blades not included.Application For controlled fastening of screws at a predefined torque, in combination with a Wiha torque 4 mm interchangeable blade.

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.The correct torque protects you from warranty claims.Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.Fully compatible with the Wiha slimBit system.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.The correct torque protects you from warranty claims.Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.Fully compatible with the Wiha slimBit system.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

For professional screwdriving/fine adjustment AND torque-controlled screwdriving. Slip-over and therefore safe torque mechanism with quick adjustment for five selectable clockwise/anticlockwise tightening torques (1.0, 1.5, 2.0, 2.5, 3.0 Nm) and a fixed position (torque lock) for unlimited loosening/tightening torques. Quick-release holder for high strength. Suitable for bits with 1/4'' hexagon drive. Torque screwdriver with fast adjustmentEasy, fast adjustment of the torque valueFixed position (torque lock) for unlimited loosening and tightening torquesSlip-over torque function for clockwise/anticlockwise tighteningEasy, fast adjustment of the selectable tightening torques (1.0, 1.5, 2.0, 2.5, 3.0 Nm)For bits with 1/4'' hexagon drive, also suitable for sockets using an adapter

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.The correct torque protects you from warranty claims.Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.Fully compatible with the Wiha slimBit system.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

Lowers your costs: The correct torque protects you from warranty claims.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers. 1 x easyTorque electric torque adapter for slimBits and slimVario® holder in blister (41342) 2,0 Nm1 x slimBit electric bit PlusMinus/Pozidriv (34589) SL/PZ1 x 75 mm1 x slimBit electric bit PlusMinus/Pozidriv (34590) SL/PZ2 x 75 mm1 x SoftFinish® electric screwdriver handle

Lowers your costs: The correct torque protects you from warranty claims.Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers. 1 x easyTorque electric torque adapter for slimBits and slimVario® holder in blister (41341) 0,8 Nm1 x slimBit electric bit PlusMinus/Pozidriv (34589) SL/PZ1 x 75 mm1 x slimBit electric bit PlusMinus/Pozidriv (34590) SL/PZ2 x 75 mm1 x SoftFinish® electric screwdriver handle

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.The correct torque protects you from warranty claims.Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.Fully compatible with the Wiha slimBit system.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.The correct torque protects you from warranty claims.Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.Fully compatible with the Wiha slimBit system.Provides you with full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. Standards: Manufactured acc. to IEC 60900.Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

7-piece toolkit. For professional screwdriving/professional fine adjustment AND torque-controlled screwdriving.Slip-over and therefore safe torque mechanism with quick adjustment for clockwise/anticlockwise and five selectable tightening torques (2.0, 3.0, 4.0, 5.0, 6.0 Nm) and a fixed position (torque lock) for unlimited loosening/tightening torques. Quick-release holder for high strength. Ideal for use on bicycles. Suitable for bits with 1/4'' hexagon drive. 6 tough bits (50 mm long), profile and size of the bits are easily recognisable by the Wera Take it easy tool finder with its colour coding and clearly visible labelling.Screwdriver kit bicycle workTorque screwdriver with fast adjustmentEasy, fast adjustment of the torque valueFixed position (torque lock) for unlimited loosening and tightening torquesSlip-over torque function for clockwise/anticlockwise tighteningEasy, fast adjustment of the selectable tightening torques (2.0, 3.0, 4.0, 5.0, 6.0 Nm)For bits with 1/4'' hexagon drive, also suitable for sockets with an adapter - ideal for use on bicyclesWith the Take it easy tool finder system: colour coding according to profiles and size marking

Increases your safety: Checking your torque tool regularly guarantees safe, precise work with the correct torque.Saves time: LED traffic light system displays results in a way which is quick and easy to understand.Increases your efficiency: Fast, easy checking of your torque tool thanks to mobile, compact shape.Applying the wrong torque can lead to serious consequences during delicate screw fastening tasks. The result is often damage to materials, a great deal of rectification work and warranty claims. With the Torque QuickCheck from Wiha, you can quickly and easily test the iTorque® and Torque Vario® torque screwdrivers to check the precision of the set torque value before each use. Checking tools regularly guarantees reliable, precise work. Torque QuickCheck also impresses thanks to its user-friendly testing procedure: The Wiha torque screwdriver concerned is inserted into Torque QuickCheck together with the enclosed adapter blades to verify how precise the torque tool is. The LED light then clearly indicates the result in traffic light colours. Thanks to its compact, handy shape, the Torque QuickCheck is the ideal companion when out on jobs.Application: Only suitable for all Wiha torque screwdrivers which can be configured to a check value of 2.8 Nm.

16-piece toolkit. For professional screwdriving/professional fine adjustment AND torque-controlled screwdriving.Slip-over and therefore safe torque mechanism with quick adjustment for clockwise/anticlockwise and five selectable tightening torques (2.0, 3.0, 4.0, 5.0, 6.0 Nm) and a fixed position (torque lock) for unlimited loosening/tightening torques. Quick-release holder for high strength. Suitable for bits with 1/4'' hexagon drive. 15 tough bits (89 mm long).Torque screwdriver with fast adjustmentEasy, fast adjustment of the torque valueFixed position (torque lock) for unlimited loosening and tightening torquesSlip-over torque function for clockwise/anticlockwise tighteningEasy, fast adjustment of the selectable tightening torques (2.0, 3.0, 4.0, 5.0, 6.0 Nm)For bits with 1/4'' hexagon drive, also suitable for sockets with an adapter - ideal for use on bicyclesTools with Hex-Plus profile prevent premature rounding of socket head screwsSuitable for docking to the Wera 2go system