378 products were found matching your search for tubing in 2 shops:

NULL

DYMO XTL heat-shrink tubing, infinite,Black on white12 mm x 2.70 m

Heat shrinkable tubing 3:1 - on small rollHIS-3 - thin wallHIS-3 for electrical insulation and colored marking.Provides high protection against mechanical abrasion.• with only 5 tubing sizes the whole application range from 1 - 20 mm diameter is covered• high shrinkage ratio 3:1• packaging in dispenser boxes allows easy handling, as well as dust-free and tidy storage even after opening• suitable for the HIS Service Station

Heat-shrink tubing for Rhino labelling machinesHeat-shrink tubing is a non-sticky and therefore durable solution made from polyolefin that you can use to label and simultaneously protect your wires and cables. The heat-shrink tubing is fire-retardant and has a shrink ratio of 3:1.• Material: polyolefin• Shrink ratio: 3:1• Width: 12 mm• Length: 1.5 m• Text colour/tape colour: black/whiteSuitable for: RHINO 4200, 5000, 5200, 6000 and ILP219

Heat-shrink tubing for Rhino labelling machinesRHINO heat-shrink tubingYou can use polyolefin heat-shrink tubing from DYMO to label a wide range of cable diameters neatly and permanently. • Material: polyolefin• Shrink ratio: 3:1• Width: 9 mm• Length: 1.5 m• Text colour/tape colour: black/yellowSuitable for: RHINO 4200, 5000, 5200, 6000 and ILP219

• heat shrink tubing set in attractive case• for insulation, as kink protection or for color marking• further use of the case for storing nails, screws, etc.• compartment sizes adjustable by repositioning the yellow dividers

Brother Pro Tape HSe-651E heat-shrink tubing - black on yellowOriginal Brother 651E heat-shrink tubing - 21.0 mm wide, 1.5 m longThe heat-shrink tubing is part of the Pro Tape series, which is designed to meet the needs of professional users looking for long-term labelling solutions. Label cables professionally with Brother Pro Tapes.The Original Brother Pro Tape HSe-651E heat-shrink tubing is specifically designed for permanently marking and identifying cables and wires. The non-adhesive heat-shrink tubing with black lettering on a yellow background has a shrink ratio of 3:1 and is suitable for cables with a diameter between 4.2 and 13.5 mm. It is compatible with the UL224 standard for operating temperature, operating voltage and flammability.Product details:Black on yellowShrinks when exposed to heat, allowing cables to be easily identified21.0 mm wide, 1.5 m longDurable, easily readable resultsMaterial: polyolefinRecommended shrink temperature: 110°C to 140°CCOMPATIBLE WITH THE FOLLOWING DEVICES: PT-P700/PT-P750W/PT-P900W/PT-P950NW/PT-D800W/PT-E500VP/PT-E550WVP/PT-E550WNIVP

Box of 8 m, black, double-walled heat-shrink tubing with a thermoplastic adhesive liningA practical assistant in the workplace. Simply pull out and cut off the desired length.Ø before shrinking: 4.0 mmØ after shrinking: 1.0 mmWall thickness after shrinking: 1.0 mm +/- 0.15 mmLength: 8.0 mColour: blackMaterial: polyolefin, radiation-crosslinked, heat-stabilised, flame retardantShrink ratio: 04:01Shrinks at: >110C°Resistance after processing: -45°C to 125°C

Heat-shrink tubing for Rhino labelling machinesHeat-shrink tubing is a non-sticky and therefore durable solution made from polyolefin that you can use to label and simultaneously protect your wires and cables. The heat-shrink tubing is fire-retardant and has a shrink ratio of 3:1.• Material: polyolefin• Shrink ratio: 3:1• Width: 6 mm• Length: 1.5 m• Text colour/tape colour: black/whiteSuitable for: RHINO 4200, 5000, 5200, 6000 and ILP219

Heat-shrink tubing for Rhino labelling machinesHeat-shrink tubing is a non-sticky and therefore durable solution made from polyolefin that you can use to label and simultaneously protect your wires and cables. The heat-shrink tubing is fire-retardant and has a shrink ratio of 3:1.• Material: polyolefin• Shrink ratio: 3:1• Width: 9 mm• Length: 1.5 m• Text colour/tape colour: black/whiteSuitable for: RHINO 4200, 5000, 5200, 6000 and ILP219

Heat-shrink tubing for Rhino labelling machinesHeat-shrink tubing is a non-sticky and therefore durable solution made from polyolefin that you can use to label and simultaneously protect your wires and cables. The heat-shrink tubing is fire-retardant and has a shrink ratio of 3:1.• Material: polyolefin• Shrink ratio: 3:1• Width: 19 mm• Length: 1.5 m• Text colour/tape colour: black/whiteSuitable for: RHINO 4200, 5000, 5200, 6000 and ILP219

Heat-shrink tubing for Rhino labelling machinesRHINO heat-shrink tubingYou can use polyolefin heat-shrink tubing from DYMO to label a wide range of cable diameters neatly and permanently. • Material: polyolefin• Shrink ratio: 3:1• Width: 6 mm• Length: 1.5 m• Text colour/tape colour: black/yellowSuitable for: RHINO 4200, 5000, 5200, 6000 and ILP219

Heat-shrink tubing for Rhino labelling machinesRHINO heat-shrink tubingYou can use polyolefin heat-shrink tubing from DYMO to label a wide range of cable diameters neatly and permanently. • Material: polyolefin• Shrink ratio: 3:1• Width: 24 mm• Length: 1.5 m• Text colour/tape colour: black/yellowSuitable for: RHINO 5000, 5200, 6000 and ILP219

Shrink tubing set in attractive caseThin-walled heat-shrinkable tubing with hot-melting internal adhesive to protect against moisture and corrosionTransparent tubing for permanent protection of labeling solutions130 sections in 3 sizesThe ShrinKit 321 series consists of five attractive and practical heat-shrinkable tubing sets. Available are ShrinKit 321 Universal, ShrinKit 321-A, ShrinKit 321-A Basic, ShrinKit 321 Basic, and ShrinKit 321 Universal Basic. Thanks to the optimum shrinkage rate of 3:1, the individual sets cover a wide range of applications in just a few sizes. The search for the required shrink tube is very simple, because all compartments are clearly marked with area of application, section length and content.

Box of 5 m, black, double-walled heat-shrink tubing with a thermoplastic adhesive liningA practical assistant in the workplace. Simply pull out and cut off the desired length.Ø before shrinking: 8.0 mmØ after shrinking: 2.0 mmWall thickness after shrinking: 1.2 mm +/- 0.15 mmLength: 5.0 mColour: blackMaterial: polyolefin, radiation-crosslinked, heat-stabilised, flame retardantShrink ratio: 04:01Shrinks at: >110C°Resistance after processing: -45°C to 125°C

Heat-shrink tubing assortment in transparent box with hinged lidShrink ratio: 2:1Length: 15 cmContent: 181 x each of SDH 1.6 red/black/transparent1 x each of SDH 2.4 blue/black/green1 x each of SDH 3.2 white/black/yellow1 x each of SDH 4.8 red/black/transparent1 x each of SDH 6.4 blue/black/green1 x each of SDH 9.5 white/black/yellow

Box of 4 m, black, double-walled heat-shrink tubing with a thermoplastic adhesive liningA practical assistant in the workplace. Simply pull out and cut off the desired length.Ø before shrinking: 12.0 mmØ after shrinking: 3.0 mmWall thickness after shrinking: 1.4 mm +/- 0.15 mmLength: 4.0 mColour: blackMaterial: polyolefin, radiation-crosslinked, heat-stabilised, flame retardantShrink ratio: 04:01Shrinks at: >110C°Resistance after processing: -45°C to 125°C

Brother Pro Tape HSe-661E heat-shrink tubing - black on yellowOriginal Brother 661E heat-shrink tubing - 31.0 mm wide, 1.5 m longProduct details:Black on yellowShrinks when exposed to heat, allowing cables to be easily identified31.0 mm wide, 1.5 m longDurable, easily readable resultsMaterial: polyolefinRecommended shrink temperature: 110°C to 140°CThe heat-shrink tubing is part of the Pro Tape series, which is designed to meet the needs of professional users looking for long-term labelling solutions. Label cables professionally with Brother Pro Tapes.The Original Brother Pro Tape HSe-661E heat-shrink tubing is specifically designed for permanently marking and identifying cables and wires. The non-adhesive heat-shrink tubing with black lettering on a yellow background has a shrink ratio of 3:1 and is suitable for cables with a diameter between 6.3 and 20.0 mm. It is compatible with the UL224 standard for operating temperature, operating voltage and flammability.Compatible with the following devices: PT-D800W / PT-P900W / PT-950NW

Box of 3 m, black, double-walled heat-shrink tubing with a thermoplastic adhesive liningA practical assistant in the workplace. Simply pull out and cut off the desired length.Ø before shrinking: 16.0 mmØ after shrinking: 4.0 mmWall thickness after shrinking: 1.7 mm +/- 0.15 mmLength: 3.0 mColour: blackMaterial: polyolefin, radiation-crosslinked, heat-stabilised, flame retardantShrink ratio: 04:01Shrinks at: >110C°Resistance after processing: -45°C to 125°C

They expect a 100-piece premium heat-shrinkable tubing range with black heat-shrinkable tubing for a variety of applications. Whether electronics, household, workshop, field serviceOr hobby - the extensive selection means that you always have the right shrink tube section ready. Whether repair, insulation, protective coating, damage protection, protection against corrosion, As well as friction, the PE heat-shrinkable hoses are mechanically very resistant and have a high insulating effect.Material: PE, shrinkage temperature: 70 °C ... 110 °C, operating temperature: -40 °C ... 125 °C, flammability class: VW-1, tensile strength (min.): 10.4 MPa, dielectric strength 1.5 kV/mm (30 sec.), industrial quality. All hoses comply with RoHS and REACH guidelines and are halogen-free. Contents: 5 x - Ø 12 mm - Length 65 mm 3 x - Ø 18 mm - Length 95 mm 4 x - Ø 15 mm - Length 95 mm 25 x - Ø 3 mm - Length 32 mm 30 x - Ø 1.5 mm - Length 32 mm 8 x - Ø 9 mm - Length 65 mm 15 x - Ø 4.5 mm Length - 32 mm 10 x - Ø 6 mm Length - 65 mm