54 products were found matching your search for victron in 1 shops:
-
VICTRON ENERGY VE MPPT 100/50 - Solar charge controller, 100/50 MPPT
Vendor: REICHELT IE Price: 205.96 € (+9.95 €)A solar charger is supplied with energy via solar panels and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximizes and intelligently directs this energy harvesting to fully charge the batteries in as little time as possible. The SmartSolar maintains the battery's functionality, extending its life.The SmartSolar charge controller will even recharge a severely discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.MPPT: Ultra-fast Maximum Power Point TrackingBy continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that all available energy is actually being drawn from the panels and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.Remote monitoring and controlYou can remotely control and monitor the extensive features of your SmartSolar MMPT charger by attaching a Bluetooth® dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge. Load outputThe 'Intelligent Load Output' function prevents damage caused by using ''dead'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - preventing excessive discharge of your batteries. And here's the kicker: the SmartSolar will attempt to recharge the battery to 100% every day. If this is not possible - e.g. in bad weather - it raises the disconnect voltage value every day until it is successful.Technical data:Model: MPPT 100/50Battery voltage: 12/ 24 VNominal charging current: 50 ANominal PV power (12 V): 700 WNominal PV power (24 V): 1400 WShort circuit current: max. 60 APV open circuit voltage: max. 100 VPeak efficiency: 98%Bluetooth® interface compatible with: iOS/ Andoid/ MacOS/ Windows
-
VICTRON ENERGY VE MPPT 100/30 - Solar charge controller,100/30MPPT
Vendor: REICHELT IE Price: 143.23 € (+9.95 €)A solar charger is supplied with energy via solar modules and then stores it in batteries. Using the latest and fastest technology, SmartSolar maximizes this energy generation and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the functionality of the battery and thus extends its service life.The SmartSolar charge controller even recharges a heavily discharged battery. It can operate at a battery voltage of only 0 volts, provided the cells are not permanently sulphated or otherwise damaged.MPPT: Ultra-fast maximum Power point TrackingBy continuously monitoring the voltage and current output of your Solar(PV) modules, the MPPT technology ensures that all the energy that is available is actually taken from and stored in the modules. The advantage of this is most noticeable when the sky is partially covered and the light intensity changes constantly.Remote monitoring and controlYou can remotely control and monitor the rich features of your SmartSolar MMPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictorConnect. When your facility is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT at any time and from anywhere. Both services are available free of charge. Load OutputThe Intelligent Load Output feature prevents damage caused by the use of ''empty'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - this will prevent excessive discharge of your batteries. And here comes the highlight: The SmartSolar tries to charge the battery back to 100% every day. If this is not possible - e.g. in bad weather - it raises the voltage value for separation daily until it is successful.Technical Data:Model: MPPTBattery voltage: 12/ 24 V.Rated charging current: 30 A.Nominal PV power (12 V): 440 W.Nominal PV power (24 V): 880 W.Short-circuit current: Max. 35 A.PV no-load voltage: 100 V max.Peak Efficiency: 98%Bluetooth interface compatible with: IOS/ Andoid/ MacOS/ Windows
-
VICTRON ENERGY VE MPPT 75/15 - Solar charge controller, MPPT 75/15
Vendor: REICHELT IE Price: 71.95 € (+9.95 €)The Smartsolar 75/15 from Victron Energy is a MPPT solar charge controller with 15A max. charge current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth®, which makes the purchase of a Bluetooth® dongel unnecessary. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth® in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices.MPPT: Ultra-fast Maximum Power Point TrackingBy continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that all available energy is actually being drawn from the panels and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.Remote monitoring and controlYou can remotely control and monitor the extensive features of your SmartSolar MMPT charger by pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet portal (VRM), you have full access to your MPPT anytime and from anywhere. Both services are available free of charge. Load outputThe 'Intelligent Load Output' function prevents damage caused by using ''dead'' batteries. You can configure the voltage at which the SmartSolar will disconnect a load - preventing excessive discharge of your batteries. And here's the kicker: the SmartSolar will attempt to recharge the battery to 100% every day. If this is not possible - e.g. in bad weather - it raises the disconnect voltage value every day until it is successful.Technical data:Model: MPPT 75/15Battery voltage: 12/ 24 VNominal charging current: 15 ANominal PV power (12 V): 220 WNominal PV power (24 V): 440 WShort circuit current: max. 15 APV open circuit voltage: max. 75 VPeak efficiency: 98%Bluetooth® interface compatible with: iOS/ Android/ MacOS/ Windows
-
VICTRON ENERGY VE SCC110015060R - SmartSolar MPPT 100/15 15 A solar charge controller
Vendor: REICHELT IE Price: 83.95 € (+9.95 €)The SmartSolar 100/15 from Victron Energy (MPN SCC110015060R) is an MPPT solar charge controller with max. 15 A charging current for charging 12 V and 24 V batteries. Unlike the BlueSolar 100/15, the smart version has integrated Bluetooth, which means you do not need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets and other devices.An overview of the most important technical featuresMax. 15 A charging current, suitable for 12 V and 24 V batteriesNominal PV power for 12 V systems: 220 WNominal PV power for 24 V systems: 440 W15 A load outputHigh peak efficiency of 98%Freely programmable battery charging algorithm (via the free Victron Connect app)Programmable light dimming functionsUltra-fast Maximum Power Point Tracking
-
VICTRON ENERGY VE MPPT CONTROL - MPPT Control, remote control for Victron BlueSolar MPPT series
Vendor: REICHELT IE Price: 53.97 € (+9.95 €)Victron MPPT Control (MPN SCC900500000) is a solar computer, or a remote control panel, which can be used to configure and evaluate every BlueSolar MPPT charge controller with integrated VE.Direct port. With the MPPT Control, configuring and monitoring your load controller and its performance parameters is convenient and simple.Comprehensive viewing and control optionsThe MPPT Control offers a whole range of display values that provide the user with a deep insight into the controller's operating performance at all times. It is possible to read not only the current values, but also the historical values, which are stored in the device's internal memory for 30 days.In addition to standard indicators such as live data and historical yield data, this device also offers a number of display options. In the history memory, information about the length of the individual charging stages, such as ''bulk, absorption and float'', is also available. Unique in this price range!
-
VICTRON ENERGY VE BS IP65 12/25 - Automatic charger for lead-acid, lithium batteries, IP65, 12V/25
Vendor: REICHELT IE Price: 217.05 € (+9.95 €)The Blue Smart IP65 12/25(1) 12V 230V Battery Charger (BPC122531064) is Victron Energy's latest professional, charger with integrated Bluetooth® module. It charges 12V batteries of various types and delivered a maximum charging current of 25A. Together with the free VictronConnect app, you can thus easily and smartly evaluate the activity of your battery charger via your smartphone, tablet or computer and even configure it to a certain extent.Technical highlights of the Blue Smart IP65 12/25(1)battery charger:easy configuration and setup of the Blue Smart IP65 12/25(1) via Bluetooth® interfacemax. 25A charging current, suitable for all 12V battery typessolid protection against splash water. dust and chemicals thanks to IP65 protectionhas several functions to extend battery lifeautomatic temperature adjustment at low, respectively high temperaturesautomatic power supply function7-step intelligent charging algorithmcan recover completely discharged batteries ''dead batterieshas low energy mode for charging small batterieslithium-ion battery mode With up to 95% efficiency, these chargers generate three to four times less heat than the industry standard. And, after the battery is fully charged, power consumption is reduced to 0.5 watts, five to ten times better than the industry standard.Durable, safe and quietlow heat load on electronic componentsprotected against ingress of dust, water and chemicals.protection against overheating: the output current is linearly reduced when the temperature rises up to 60°C, so the charger will not fail even in extreme temperaturesthe chargers are absolutely silent thanks to passive cooling: no fan or other moving parts Reconditioning (recovery)A lead-acid battery that has not been sufficiently charged or has been left in a discharged state for days or weeks will deteriorate in performance due to sulfation. Provided the process is stopped in time, it allows the sulfation to be partially reversed by charging the battery at low current until a higher voltage is reached.Restoring fully discharged batteriesMost chargers with reverse battery protection will not recognize a battery that has been discharged to zero volts or near zero volts, and therefore will not recharge it. However, the Blue Power charger will attempt to recharge a fully discharged battery with low current and will resume normal charging after sufficient voltage has been established across the battery terminals.Scope of delivery:1x Victron BPC122531064 Blue Smart IP65 12/25(1)230V battery charger for 12V batteries1x user manual1x connection terminals1x M8 cable lug connector<...
-
VICTRON ENERGY VE SCC020030200 - BlueSolar MPPT 100/30 30 A solar charge controller
Vendor: REICHELT IE Price: 118.93 € (+9.95 €)The Victron MPPT 100/30 (MPN SCC020030200) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system. Apart from the higher charging and PV power, this Blue sets itself apart even more from the lower models. This is because the 100/30 controller has the ability to fully program and store various charging algorithms. The self-created algorithms can then be selected directly via a switch wheel on the housing. The load output directly on the controller is no longer available from this model onwardsBetter protection compared to the smaller models in the BlueSolar MPPT seriesCompared to the 75/10, 75/15 and 100/15 model, the BlueSolar 100/30 MPPT has an overheating protection with a shut-down function and automatic restart after reaching a normal operating temperature.
-
VICTRON ENERGY VE BS IP22 12/30 - Automatic charger for lead, lithium batteries, IP22, 12V/30A
Vendor: REICHELT IE Price: 218.87 € (+9.95 €)The Blue Smart IP22 charger from Victron Energy, is a professional, compact 12 V 30 a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The charger can be used with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and mobile homes and charges both classic 12 V lead-acid batteries and modern lithium batteries.Technical Highlights:Charges 12 V lead-acid, gel, AGM and lithium batteries30 a maximum charging current3 Battery Charging OutputsState-of-the-art, seven-stage charging algorithmWith integrated Bluetooth for use with the free VictorConnect appIntelligent charging, up to the perfect battery conditionThe seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life. Recovery of deep-discharged ''dead'' batteriesUnlike most other brands and product lines, the Blue Smart IP22 charger will try to recharge a low-discharge battery by forcing it to have a low-charge current. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.Remotely check battery status using the VictorConnect appThe Blue Smart charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictorConnect app. Trend-setting efficiencyWith an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. After the battery has also been fully charged, the power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard.Storage mode: Less maintenance and aging when the battery is at restStorage mode is activated whenever no discharge has occurred within 24 hours. The charge maintenance voltage is then reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize the gas development and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This provides a kind of equalizing charge that prevents electrolyte stratification and sulphation, the two main causes of premature battery failure.
-
VICTRON ENERGY VE BS IP65 12/15 - Automatik-Ladegerät für Blei-, Lithiumakkus, IP65, 12V/15A
Vendor: REICHELT IE Price: 169.37 € (+9.95 €)Batterieladegerät mit eingebauten Bluetooth. Es ist zum aufladen von 12 V Batterien verschiedenster Bauarten ausgelegt und lieferten einen maximalen Ladestrom von 15 A. Zusammen mit der kostenlosen VictronConnect App können Sie so die Aktivität Ihres Batterieladers einfach und smart über Ihr Smartphone, Tablet oder den Computer auswerten und sogar bis zu einem gewissen grad konfigurieren.Technische Highlights:einfache Konfiguration und Einrichtungfür alle 12 V Batterie-Typen geeignetmax. 15 A Ladestromautomatischer Temperatur Abgleich bei niedrigen, bzw. hohen Temperaturen7-stufiger, intelligenter Ladealgorithmuskann vollständig entladene Batterien ''tote Batterien'' wiederherstellenverfügt über Niedrigenergiemodus zum Laden kleiner BatterienLithium-Ionen Batteriemodusultra-hocheffzientes ''grünes'' BatterieladegerätMit einem Wirkungsgrad von bis zu 95 % erzeugen diese Ladegeräte drei- bis viermal weniger Wärme, als der Industriestandard. Und, nachdem die Batterie voll aufgeladen ist, reduziert sich der Stromverbrauch auf 0,5 Watt, das ist fünf- bis zehnmal besser, als der Industriestandard. langlebig, sicher und leisegeringe Wärmebelastung der elektronischen Bauteilegeschützt gegen das Eindringen von Staub, Wasser und Chemikalien.Schutz vor Überhitzung: Der Ausgangsstrom wird linear verringert, wenn die Temperatur auf bis zu 60 °C ansteigt, das Ladegerät versagt also auch nicht bei extremen Temperaturendie Ladegeräte sind absolut geräuschlos dank passiver Kühlung: kein Lüfter oder anderen beweglichen Teile Reconditioning (Wiederherstellung)Eine Blei-Säure-Batterie. die nicht ausreichend geladen wurde oder tage- bzw. wochenlang im entladenen Zustand belassen wurde, verschlechtert ihre Leistung aufgrund von Sulfatierung. Sofern der Prozess rechtzeitig gestoppt wird, lässt sie die Sulfatierung teilweise wieder rückgängig machen, indem die Batterie mit niedrigem Strom geladen wird, bis eine höhere Spannung erreicht wurde.Funktion zur Wiederherstellung von vollständig entladenen BatterienDie meisten Ladegeräte mit Verpolungsschutz erkennen eine Batterie, die bis auf Null Volt oder fast auf Null Volt entladen wurde, nicht und laden sie daher auch nicht wieder auf. Das Blue Power-Ladegerät versucht jedoch, eine vollständig entladene Batterie mit niedrigem Strom wieder aufzuladen und nimmt den normalen Ladevorgang wieder auf, nachdem ausreichend Spannung über den Batterieanschluss aufgebaut wurde.Lieferumfang:1x Batterieladegerät1x Bedienungsanleitung1x Anschlussklemmen1x M8 Kabelschuh-Steckverbinder
-
VICTRON ENERGY VE MK3-USB - VE.Bus to USB interface for Victron inverters
Vendor: REICHELT IE Price: 72.96 € (+9.95 €)Victron Energy's MK3 USB to VE.Bus Interface (MPN ASS030140000) connects your computer or a notebook to a variety of Victron products via the VE.Bus port.The interface enables you to use a whole range of Victron programs to configure and analyze your Victron product. The easiest way to configure complex systems or single devices to your needs. The following free programs can be used with the help of the interface:VEConfigure 3 (v9004193)VE.Bus Quick Configure (v9010137) - For the installation of 3-phase systems, for example with three Multiplus invertersVE.Bus System Configurator (v9009132) - For complex systemsVEFlash (v9005147) - for simple firmware updates of Victron products with VE.BusThe following device families are currently compatible with the VE.Bus to USB interface:MultiMultiGridMultiPlusQuattroPhoenix inverters (Only models with a VE.Bus communication port)ECOmultiEasySolarEasyPlus
-
VICTRON ENERGY VE ASS050500000 - Wall mount, for Victron BMV, MPPT Control
Vendor: REICHELT IE Price: 24.99 € (+9.95 €)This plastic housing (MPN ASS050500000) is the elegant and safe way to house your BMV from the 700 series or the MPPT Control solar computer. In addition to the significantly improved protection of the electronics against moisture, the housing also offers other advantages in terms of installation safety. The cables are routed through an opening and can still be relieved of strain in the housing. Compatible withVictron 700 series BMV battery monitors Victron MPPT ControlIncluded in delivery1x Victron ASS050500000 housing for BMV70x and MPPT Control
-
VICTRON ENERGY VE BS IP22 12/15 - Automatic charger for lead, lithium batteries, IP22, 12V/15A
Vendor: REICHELT IE Price: 139.53 € (+9.95 €)The Blue Smart IP22 charger from Victron Energy, is a professional, compact 12 V 15 a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The charger can be used with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and mobile homes and charges both classic 12 V lead-acid batteries and modern lithium batteriesTechnical Highlights:Charges 12 V lead-acid, gel, AGM and lithium batteries15 a maximum charging current3 Battery Charging OutputsState-of-the-art, seven-stage charging algorithmWith integrated Bluetooth for use with the free VictorConnect appIntelligent charging, up to the perfect battery conditionThe seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life. Recovery of deep-discharged ''dead'' batteriesUnlike most other brands and product lines, the Blue Smart IP22 charger will try to recharge a low-discharge battery by forcing it to have a low-charge current. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.Remotely check battery status using the VictorConnect appThe Blue Smart charger has built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictorConnect app. Trend-setting efficiencyWith an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. After the battery has also been fully charged, the power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard.Storage mode: Less maintenance and aging when the battery is at restStorage mode is activated whenever no discharge has occurred within 24 hours. The charge maintenance voltage is then reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize the gas development and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This provides a kind of equalizing charge that prevents electrolyte stratification and sulphation, the two main causes of premature battery failure.
-
VICTRON ENERGY VE BUS SM DONGLE - Victron VE.Bus Smart Dongle
Vendor: REICHELT IE Price: 99.64 € (+9.95 €)The VE.Bus Smart Dongle from Victron Energy combines two products in one: Firstly, it allows the Victron inverters/chargers with VE.Bus port to be connected to your smartphone or tablet via Bluetooth. Secondly, it supplements these devices with a voltage and temperature recording, which is especially useful when used with the Multiplus 2, as it does not have built-in terminals for voltage and temperature sensor wiring.Use your VE.Bus products with the VictronConnect appIt is the Bluetooth accessory for our inverters/chargers: Multis, MultiPlus, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros and our Phoenix inverter series with VE.bus connection. After installation, use the VictronConnect app to monitor operation and operate the system: Change the input current limit and switch between the Off, On and Charger Only modes.Secondly, it includes voltage and temperature detection to inverters/chargers.
-
VICTRON ENERGY VE BAT-GUARD500 - Battery monitor, 500 A, 50 mV, Bluetooth
Vendor: REICHELT IE Price: 116.79 € (+9.95 €)Victron SmartShunt 500 A 50 mV battery monitorThe Victron SmartShunt 500 A 50 mV is an all-in-one battery monitor that is connected between the battery and a charger. The Victron Smart Shunt can connect to a smartphone or tablet via Bluetooth using the VictronConnect app. The app can read information about the charge status, the estimated remaining time and lots of additional information. Alternatively, the SmartShunt can also be connected to a Victron GX device - sold separately - which requires a VE.Direct cable.Benefits:Simple battery monitoring with little cablingMobile phone connection via BluetoothCan also be used to monitor a 2nd batteryTechnical dataConnection: M8Width: 54 mmHeight: 56 mmLength: 120 mm
-
VICTRON ENERGY VE SCC020035000 - BlueSolar MPPT 150/35 35 A solar charge controller
Vendor: REICHELT IE Price: 17.89 € (+9.95 €)Key product features of the BlueSolar 150/35 35 A 12 V 24 V 36 V 48 V MPPT Ultra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skies Automatic detection of the MPP voltage in partial shading ensures another improvement to the yield compared to ''simple'' MPPT charge controllers Integrated VE.Direct data communication port for connecting, for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel High maximum efficiency of 98% Fully programmable charging algorithms, which are subsequently activated and switched manually via a switch on the housing Nominal charging current 35 A, 150 V maximum PV no-load voltage 12 V: 500 W/24 V: 1000 W/36 V: 1500 W/48 V: 2000 W Integrated protection against battery reverse polarity Multi-stage and adaptive charging algorithm Integrated temperature sensor balances maintenance and constant charge voltage by temperature
-
VICTRON ENERGY VE ASS030530218 - Victron VE.Direct, 1.8 m connecting cable
Vendor: REICHELT IE Price: 15.00 € (+9.95 €)The Victron 1.80 m VE.Direct Cable (ASS030530218) is required to connect devices intended to communicate with each other via the VE-Direct port. For example, the BlueSolar controller and the MPPT Control remote control panel.The following connections can be established to it:Victron BlueSolar MPPT controller for the Victron Color Control GX PanelVictron BlueSolar MPPT controller for the MPPT Control remote control unit BMV70xxx series to the Color Control GX PanelBMV60xxx series to Color Control GX PanelPhoenix inverter 12 V 24 V 48 V 250 W - 500 W for the Color Control GX Panel The VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10 m.Included in delivery:1x Victron ASS030530218 1.8 m VE.Direct Cable
-
VICTRON ENERGY VE PHOE 12/800 - Inverter, sine, 12 V, 650 W, protective contact
Vendor: REICHELT IE Price: 270.87 € (+9.95 €)Victron Phoenix 12/800 VE.Direct 650 W inverterThe Phoenix 12/800 VE.Direct inverter from Victron is a sine wave inverter with 650 W continuous power and 1500 W peak power. The inverter converts the 12 V DC voltage of the battery into 230 V AC. Thanks to the pure sine wave, it is also suitable for sensitive electrical appliances. Via the VE.Direct connection you can connect the inverter with a computer (VE.Direct to USB interface cable required) or a smartphone or tablet (requires VE.Direct Bluetooth Smart Dongle).The inverter is short-circuit proof and protected against overheating (whether caused by overload or ambient temperature).Technical data:cont. power at 25°C: 650 WPeak power: 1500 WInput voltage range: 9.2 - 17 VOutput voltage: 230 V ACSelf-consumption without load: 4.2 WDefault value for zero load power in ECO mode: 0.8 WOperating ambient temperature range: -40°C to 65°CProtection class: IP21
-
VICTRON ENERGY VE SCC010015050R - BlueSolar MPPT 75/15 15 A solar charge controller
Vendor: REICHELT IE Price: 53.97 € (+9.95 €)The Victron MPPT 75/15 (MPN SCC010015050R) is part of the large family of BlueSolar MPPT charge controllers and, like its older siblings, it boasts ultra-fast power tracking and can therefore boost the yield of your solar system.Key product features of the BlueSolar 75/15 15 A 12 V 24 V MPPTUltra-fast latest-generation MPP tracker ensures the maximum yield even in overcast skiesIntegrated VE.Direct data communication port for connection. For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel12 V 24 V systems are possibleNominal charging current of 15 A220 W maximum PV power at 12 V, 440 W at 24 V systemsLoad output with 15 A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)Integrated protection against battery reverse polarityMulti-stage and adaptive charging algorithmProgrammable battery charging algorithmIntegrated Battery Life Algorithm extends the life of your batteries if it is active and all loads run through the load output on the controllerDay/night timer and light suppression option
-
VICTRON ENERGY VE BMV 712 - Battery monitor BMV 712
Vendor: REICHELT IE Price: 16.89 € (+9.95 €)The BMV 712 Smart from Victron Energy (MPN BAM030712000R) is the latest battery computer in the BMV family. It provides very precise data on parameters such as battery voltage, current, power, used ampere hours, charge state and remaining time at the current discharge rate. The measurement resolution is very accurate and precise compared to similar products.in addition, it is equipped with an integrated Bluetooth module that allows you to access many functions and status reports from the battery computer via a free app. Programmable isual and acoustic alarm Programmable relay for switching off non-essential loads or switching on a generator if necessary. A 500-amp, quick-connect shunt and a connection kit.Shunt capacity selectable up to 10,000 amps. VE.Direct communication connection Stores a wide range of historical data that can be used to assess usage patterns and battery health. Wide input voltage range: 6.5 - 70 VHigh current measurement resolution 10 mA (0.01 a)
-
VICTRON ENERGY VE SCC110020170R - BlueSolar MPPT 100/20 solar charge controller
Vendor: REICHELT IE Price: 77.95 € (+9.95 €)The Victron Energy MPPT 100/20 (MPN SCC110020170R) is part of the BlueSolar MPPT charge controller family and offers ultra-fast power tracking, which can boost the yield of your solar system.MPPT: ultra-fast maximum power point trackingBy continuously monitoring the voltage and current output of your solar (PV) module, the MPPT technology ensures that all the available energy can be taken from the modules and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.FeaturesSuitable for 12 V/24 V/48 V systemsShort-circuit-proof load outputIntelligent battery management with Battery LifeProgrammable battery charging algorithmDay/night timer and light suppression optionIntelligent VE.Direct data communication port for connection to additional devices such as Bluetooth Smart Dongle or GX Color Control PanelIntegrated protection against output short circuit/overtemperature
54 results in 0.127 seconds
Related search terms
© Copyright 2025 shopping.eu