469 products were found matching your search for 5x Saft Lithium 36V in 2 shops:

Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18-Volt X2 LXT (36-Volt) Lithium-Ion Brushless Rear Handle 7-1/4 in. Circular Saw (XSR01PT). It's powered by two 18-Volt LXT Lithium-Ion batteries for maximum performance and has an electronically controlled BL Brushless motor that matches torque and RPM to the application. Makita 18-Volt X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18-Volt batteries with the XSR01PT as they use across the expansive Makita 18-Volt LXT cordless tool series. The XSR01PT has a long list of features for efficient cutting without the cord. Users of leading corded saws will appreciate the blade-left rear-handle design. The electronically controlled brushless motor delivers a full 5,100 RPM for efficient cutting. In internal testing, the XSR01PT made up to 558 crosscuts per charge in 2x4 SPF lumber using 2 fully-charged 5.0Ah batteries. Added features include a large 2-9/16 in. cutting capacity at 90 degree that will cut 3X lumber in a single pass and an electric brake for maximum productivity. The saw has a die-cast magnesium base and blade guard with die-cast aluminum blade cover and motor housing, which combines durability with less weight (only 12.4 lbs. with batteries).

Makita is a pioneer in brushless motor engineering, battery technology and miter saw innovation and has combined this expertise in the 18-Volt X2 LXT (36-Volt) Lithium-Ion Brushless 10 in. Dual Bevel Sliding Compound Miter Saw. It's powered by2 18-Volt Lithium-Ion batteries for 36-Volt power and performance, but without leaving the 18-Volt LXT platform. Makita brushless motors are engineered for up to 50% longer run time, increased power and speed and longer tool life. The XSL04PTU has an efficient BL Brushless Motor that delivers up to 4,400 RPM for fast and efficient cutting, with Automatic Speed Change technology to adjust cutting speed and torque under load for optimum performance. The XSL04PTU is equipped with Auto-Start Wireless System (AWS), which uses Bluetooth technology for wireless power-on/off communication with the AWS-equipped dust extractor (sold separately). AWS is intelligent communication that eliminates cords and reduces noise. The XSL04PTU has a unique 2-steel rail sliding system design that offers single slide-glide operation for smooth and dead-on accurate cutting right out of the box, as well as a reduced overall footprint that allows the saw to be positioned flush against a wall. It will also crosscut a 4x12 at 90. The saw miters 0 to 60 left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0 to 48 (left and right).

Makita is a pioneer in brushless motor engineering, battery technology, and miter saw innovation and has combined this expertise in the 18V X2 (36V) LXT Lithium-Ion Brushless 10" Dual Bevel Sliding Compound Miter Saw. It's powered by two 18V Lithium-Ion batteries for 36V power and performance, but without leaving the 18V LXT platform. Makita brushless motors are engineered for up to 50% longer run time, increased power and speed, and longer tool life. The XSL06 has an efficient BL Brushless Motor that delivers up to 4,400 RPM for fast and efficient cutting, with Automatic Speed Change technology to adjust cutting speed and torque under load for optimum performance. The XSL06 has a unique 2-steel rail sliding system design that offers single slide-glide operation for smooth and dead-on accurate cutting right out of the box, as well as a reduced overall footprint that allows the saw to be positioned flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4") and crown molding cutting capacity (6-5/8" nested), the largest in its class. It will also crosscut a 4x12 at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

There is growing demand for cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Cordless 16 In. Top Handle Chain Saw Kit (model XCU09PT). With zero emissions, lower noise and considerably less maintenance than gas-powered chain saws, the XCU09PT is a welcome solution for cutting and trimming applications. The compact top-handle design makes it ideal for the professional tree care industry. Powered by two 18V LXT batteries for maximum power, speed and run-time, the XCU09PT is easy to start by simply loading the 18V LXT Lithium-Ion Batteries and powering on. The XCU09PT has a variable speed trigger and high chain speed (0-3,940 FPM) for increased cutting speed, with torque boost mode for cutting dense material. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, no air filter or muffler to clean and there's no need to drain the fuel for storage. With the Makita Outer Rotor Brushless Motor with direct-drive system, users get high power efficiency. Other convenience features include adjustable automatic chain lubrication, built-on lock-off lever to help prevent the chain from accidentally engaging, an electric brake for maximum productivity and more. This Promotion also comes with a bonus BL1850B-2 18V LXT Lithium-Ion 5.0Ah Battery, 2/pk.

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT Lithium-Ion (36-Volt) Brushless Blower (model XBU02Z, tool only). With zero emissions, lower noise and considerably less maintenance, the 18-Volt X2 (36-Volt) Cordless Blower is a welcome solution for clean-up applications. Its powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita BL brushless motor, the blower delivers longer run time, more power and speed and longer tool life. Makita's efficient BL brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. With no carbon brushes, the Makita BL Brushless motor runs cooler and more efficiently for longer life. When powered by two 18-Volt 5.0 Ah batteries (sold separately), the efficient brushless motor delivers up to 29-minutes of run-time on dial setting #3 on a single charge. This Promotion also comes with a bonus BL1850B 18V LXT Lithium-Ion 5.0Ah Battery.

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless 18 in. Chain Saw (model XCU04PT). With zero emissions, lower noise, and considerably less maintenance, the XCU04PT is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries for maximum power, speed and run-time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU04PT has a 16 in. guide bar and the Makita-built Outer Rotor BL Brushless Motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load (2) 18-Volt LXT Lithium-Ion batteries, and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

There is growing demand for cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Cordless 14 In. Top Handle Chain Saw Kit (model XCU08PT). With zero emissions, lower noise and considerably less maintenance than gas-powered chain saws, the XCU08PT is a welcome solution for cutting and trimming applications. The compact top-handle design makes it ideal for the professional tree care industry. Powered by two 18V LXT batteries for maximum power, speed and run-time, the XCU08PT is easy to start by simply loading the 18V LXT Lithium-Ion Batteries and powering on. The XCU08PT has a variable speed trigger and high chain speed (0-4,720 FPM) for increased cutting speed, with torque boost mode for cutting dense material. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, no air filter or muffler to clean and there's no need to drain the fuel for storage. With the Makita Outer Rotor Brushless Motor with direct-drive system, users get high power efficiency. Other convenience features include adjustable automatic chain lubrication, built-on lock-off lever to help prevent the chain from accidentally engaging, an electric brake for maximum productivity and more.

Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 (36V) LXT Lithium-Ion Brushless 7-1/4 in. Circular Saw Kit (XSH06PT). It's powered by two 18V LXT Lithium-Ion batteries for maximum performance and has an electronically controlled BL Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XSH06PT as they use across the expansive Makita 18V LXT cordless tool system. The XSH06PT has a long list of features for efficient cutting without the cord. The electronically controlled brushless motor delivers a full 6,000 RPM for efficient cutting, with Automatic Speed Change technology to adjust the cutting speed and torque under load for optimum performance. In internal testing, the XSH06PT made up to 610 crosscuts per charge in 2x4 SPF lumber and up to 320 crosscuts per charge in 2x10 SPF lumber using two fully charged 5.0Ah batteries. Added features include a large 2-5/8 in. cutting capacity at 90°, and an electric brake for maximum productivity. This Promotion also comes with a bonus DMP180ZX 18-Volt LXT Lithium-Ion Cordless Inflator (Tool-Only).

There is growing demand for cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Cordless 14 In. Top Handle Chain Saw Kit (model XCU08PT). With zero emissions, lower noise and considerably less maintenance than gas-powered chain saws, the XCU08PT is a welcome solution for cutting and trimming applications. The compact top-handle design makes it ideal for the professional tree care industry. Powered by two 18V LXT batteries for maximum power, speed and run-time, the XCU08PT is easy to start by simply loading the 18V LXT Lithium-Ion Batteries and powering on. The XCU08PT has a variable speed trigger and high chain speed (0-4,720 FPM) for increased cutting speed, with torque boost mode for cutting dense material. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, no air filter or muffler to clean and there's no need to drain the fuel for storage. With the Makita Outer Rotor Brushless Motor with direct-drive system, users get high power efficiency. Other convenience features include adjustable automatic chain lubrication, built-on lock-off lever to help prevent the chain from accidentally engaging, an electric brake for maximum productivity and more. This promotion also includes a bonus BL1850B-2 18V LXT Lithium‑Ion 5.0Ah Battery, 2/pk.

There is growing demand for cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Cordless 16 In. Top Handle Chain Saw Kit (model XCU09PT). With zero emissions, lower noise and considerably less maintenance than gas-powered chain saws, the XCU09PT is a welcome solution for cutting and trimming applications. The compact top-handle design makes it ideal for the professional tree care industry. Powered by two 18V LXT batteries for maximum power, speed and run-time, the XCU09PT is easy to start by simply loading the 18V LXT Lithium-Ion Batteries and powering on. The XCU09PT has a variable speed trigger and high chain speed (0-3,940 FPM) for increased cutting speed, with torque boost mode for cutting dense material. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, no air filter or muffler to clean and there's no need to drain the fuel for storage. With the Makita Outer Rotor Brushless Motor with direct-drive system, users get high power efficiency. Other convenience features include adjustable automatic chain lubrication, built-on lock-off lever to help prevent the chain from accidentally engaging, an electric brake for maximum productivity and more.

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless 18 in. Chain Saw (model XCU04PT). With zero emissions, lower noise and considerably less maintenance, the XCU04PT is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries for maximum power, speed and run-time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU04PT has a 16 in. guide bar and the Makita-built Outer Rotor BL Brushless Motor direct drive system motor with variable speed delivers 0 FPM - 3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load (2) 18-Volt LXT Lithium-Ion batteries and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity and more. This bundles also includes the BL1850B-2, 18-Volt 5.0 Ah LXT Lithium-Ion Battery, 2-pack.

There is growing demand for cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Cordless 14 Top Handle Chain Saw, Tool Only (model XCU08Z). With zero emissions, lower noise and considerably less maintenance than gas-powered chain saws, the XCU08Z is a welcome solution for cutting and trimming applications. The compact top-handle design makes it ideal for the professional tree care industry. Powered by two 18V LXT batteries (sold separately) for maximum power, speed and run-time, the XCU08Z is easy to start by simply loading the 18V LXT Lithium-Ion Batteries and powering on. The XCU08Z has a variable speed trigger and high chain speed (0-3,940 FPM) for increased cutting speed, with torque boost mode for cutting dense material. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, no air filter or muffler to clean and there's no need to drain the fuel for storage. With the Makita Outer Rotor Brushless Motor with direct-drive system, users get high power efficiency. Other convenience features include adjustable automatic chain lubrication, built-on lock-off lever to help prevent the chain from accidentally engaging, an electric brake for maximum productivity and more. This promotional sku also includes and comes with a bonus BL1850B-2 18V LXT Lithium-Ion 5.0Ah Battery, 2/pk.

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It's powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU03PT has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0 FPM - 3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity and more. This bundles also includes the BL1850B-2, 18-Volt 5.0 Ah LXT Lithium-Ion Battery, 2-pack.

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless 14 Chain Saw Kit (model XCU07PT). With zero emissions, lower noise and considerably less maintenance, the XCU07PT is a welcome solution for cutting and trimming applications. Its powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor Brushless Motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU07PT has a 14 guide bar and the Makita-built motor with variable speed delivers 0 FPM to 3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Pick it up, load two 18-Volt LXT Lithium-Ion batteries and the saw is ready to use. Convenience features include captured bar nuts, lateral chain tensioning, a front hand guard engineered to actuate chain brake when engaged and a built-on lock lever to help prevent the chain from accidentally engaging.

Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 LXT (36V) Lithium-Ion Brushless Rear Handle 7-1/4 in. Circular Saw (XSR01PT). It's powered by two 18V LXT Lithium-Ion batteries for maximum performance and has an electronically controlled BL Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XSR01PT as they use across the expansive Makita 18V LXT cordless tool series. The XSR01PT has a long list of features for efficient cutting without the cord. Users of leading corded saws will appreciate the blade-left rear-handle design. The electronically controlled brushless motor delivers a full 5,100 RPM for efficient cutting. In internal testing, the XSR01PT made up to 558 crosscuts per charge in 2x4 SPF lumber using two fully-charged 5.0Ah batteries. Added features include a large 2-9/16 in. cutting capacity at 90 ° that will cut 3X lumber in a single pass, and an electric brake for maximum productivity. The saw has a die-cast magnesium base and blade guard with die-cast aluminum blade cover and motor housing, which combines durability with less weight (only 12.4 lbs. with batteries).

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It's powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU03PT has a 14 in. guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries, and the saw is ready to use. Convenience features include a "tool-less" chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT (36-Volt) Brushless 16 in. Chain Saw (XCU04PT1). With zero emissions, lower noise, and considerably less maintenance, the XCU04PT1 is a welcome solution for cutting and trimming applications. It's powered by two 18-Volt LXT Batteries for maximum power, speed and run-time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita outer rotor Brushless Motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU04PT1 has a 16 in. guide bar and the Makita-built Outer Rotor BL Brushless Motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18-Volt LXT Lithium-Ion batteries, and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

The Makita 18V X2 (36V) LXT Brushless Cordless Brush Cutter Kit (XRU16PT) delivers power and ease-of-use for commercial applications. It has the power equivalent to a 30cc gas brush cutter, but without the hassles of gas. The cordless brush cutter has lower noise, zero emissions, reduced maintenance and instant starts. Features of the cordless brush cutter include a bike handle design for improved grip, a BL Brushless Motor, and a variable speed trigger switch to control cutting speed. The steel drive shaft provides less vibration and durability for longer life. It has three speed options (4,600/5,500/7,000 RPM). The Automatic Torque Drive Technology mode automatically shifts speeds to extend run time or add power. The reverse rotation function allows the user to quickly clear trimmer head of entangled grass and weeds. The brush cutter features Makita Extreme Protection Technology (XPT). XPT is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.

Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18-Volt X2 LXT (36-Volt) Lithium-Ion Brushless Recipro Saw Kit. It's powered by two 18-Volt Lithium-Ion batteries for 36-Volt power and performance and has an electronically controlled BL Brushless motor that matches torque and RPM to the application. Makita 18-Volt X2 means freedom from the cord, even for demanding applications like cutting and demolition that traditionally called for a corded reciprocal saw. Best of all, users can remain in one battery platform, using the same fast-charging 18-Volt batteries on the XRJ06M as they use across the Makita 18-Volt LXT cordless tool line-up.

The Makita 18-Volt X2 LXT (36-Volt) Brushless 1-9/16 in. Advanced AVT Rotary Hammer with AWS is a cordless concrete solution that's loaded with advanced engineering for maximum efficiency. Its equipped with Auto-Start Wireless System (AWS) for wireless connectivity with an AWS-equipped dust extractor (sold separately), and features Advanced AVT for reduced vibration. The XRH07PTUN is engineered with Advanced Anti-Vibration Technology (AVT), a synchronized 3-component system for significantly less vibration. AVT is more than just a padded handle. The 3-component system includes an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. The result is a low vibration rating of only 5m/s, but with no compromise in performance: The efficient brushless motor delivers a full 8.4 ft. lbs. of impact energy, with 250 RPM to 500 RPM and 1,450 BPM to 2,900 BPM. For improved efficiency, its equipped with Auto-Start Wireless System technology. AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped XRH07PTU is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.