57 products were found matching your search for CFDs in 3 shops:

Book is in Used-VeryGood condition. Pages and cover are clean and intact. Used items may not include supplementary materials such as CDs or access codes. May show signs of minor shelf wear and contain very limited notes and highlighting. 0.63

1 pair of Kuppmen carbon fiber drumsticks, 5A - Diameter: 14.2 mm - Length: 40.5 cm - Finish: Black

With a lifespan of up to 10 times longer than wood, our Carbon Fiber Drumsticks are an investment for any serious drummer. Finished in a distinctiv...

In the past Computational Fluid Dynamics (CFD) was confined to large organisations capable of developing and supporting their own codes. But recently there has been a rapid increase in the availability of reasonably priced commercial codes, and many more industrial organisations are now able to routinely use CFD. Advances of CFD in Fluid Machinery Design provide the perfect opportunity to find out what industry is doing and this book addresses how CFD is now being increasingly used in the design process, rather than as a post-design analysis tool. COMPLETE CONTENTS Trends in industrial use of CFD Challenges and methodologies in the design of axial flow fans for high-bypass-ratio, gas turbine engines using steady and unsteady CFD A three-dimensional inverse method based on pressure loading for the design of turbomachinery blades Application of CFD to the design and analysis of axial and centrifugal fans and compressors The design and performance of a transonic flow deswirling system – an application of current CFD design techniques tested against model and full-scale experiments Recent developments in unsteady flow modelling for turbomachinery aeroelasticity Computational investigation of flow in casing treatments for stall delay in axial flow fans Use of CFD for the three-dimensional hydrodynamic design of vertical diffuser pumps Recommendations to designers for CFD pump impeller and diffuser simulations Three dimensional CFD – a possibility to analyse piston pump flow dynamics CFD analysis of screw compressor performance Prediction of aerothermal phenomena in high-speed discstator systems Use of CFD in the design of a shaft seal for high-performance turbomachinery Users and potential users, of CFD for the design of fluid machinery, managers, designers, and researchers working in the field of ‘industrial flows’, will all find Advances of CFD in Fluid Machinery Design a valuable volume discussing state-of-the-art developments in CFD.

This item is printed on demand - it takes 3-4 days longer - Neuware -This book is intended for a beginner as well as a practitioner in the CFD field. It includes the adoption of a well-known CFD package ANSYS FLUENT, which is used extensively in industrial scale as well as in academics. FLUENT is based on the Finite Element Method as the numerical solution to numerically simulate the fluid dynamics and heat transfer problems. There are a large number of commercial CFD packages in the market nowadays and CFD which is based on classical methods like Finite Difference Method, Finite Volume Method, Finite Element Method has established itself as a useful analysis and design tool. This book aims to provide the reader a user's guide and example manuals which provide knowledge of how to use the particular tool without going into deep details of deep mathematics or numerical algorithms and learning how to use FLUENT for predicting fluid flow pattern. This book will give them an informed choice when and how to apply CFD tools to a particular engineering problem. 160 pp. Englisch

In this book the CFD analysis of a centrifugal pump is done using k-ε turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump

Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Captures the key developments in Computational Fluid Dynamics since its inception in the 1960 sReviews the impact CFD has had on diverse engineering practiceDiscusses current status of research and po.

Book is in Used-VeryGood condition. Pages and cover are clean and intact. Used items may not include supplementary materials such as CDs or access codes. May show signs of minor shelf wear and contain very limited notes and highlighting. 3.76

Unread book in perfect condition.

En este libro se muestra una metodología enfocada al análisis de diferentes tipos de sistemas tanto como térmicos y de fluidos, comenzando con una breve introducción de los métodos de estudio teóricos como lo son, los métodos de elemento finito, volumen finito y de diferencias finitas, otorgando una información muy básica de lo que se trata ya que el programa que se analizara a continuación, usa un método de los ya mencionados. Posteriormente se presenta una explicación y análisis del CFD, por su significado en español (Dinámica de Fluidos Computacional) así como las partes que lo componen para que sea un buen método. Se menciona también la importancia de estas herramientas o softwares que se encuentran en la industria del diseño, su funcionamiento en general, mientras que poco a poco se va detallando.

The heat exchanger is major element as far as heat transfer and energy conservation is concern. There are so many types of heat exchangers available but due to wide range of design possibilities, simple manufacturing, low maintenance cost, cross flow and counter flow heat exchanger extensively used in petroleum, petrochemical , air conditioning, food storage and other industries. The shell and tube heat exchanger is widely used in industries as a chiller plant for transfer waste heat from the injection molding machine to the cooling water for improve the efficiency of the injection molding machine. The transformations of the waste heat from the injection molding machine to the cooling water are dependent on the heat exchange capacity of heat exchangers. To increase the heat exchange capacity of heat exchanger optimization is done which seeks to identify the best parameter combination of heat exchangers. Nine models are made on the basis of taguchi method in NX 10.00 and CFX analysis is carried out in ANSYS 14.5. Result obtained from that gives the best dimension of heat exchanger for minimum outlet temperature of water.

The heat exchanger is major element as far as heat transfer and energy conservation is concern. There are so many types of heat exchangers available but due to wide range of design possibilities, simple manufacturing, low maintenance cost, cross flow and counter flow heat exchanger extensively used in petroleum, petrochemical , air conditioning, food storage and other industries. The shell and tube heat exchanger is widely used in industries as a chiller plant for transfer waste heat from the injection molding machine to the cooling water for improve the efficiency of the injection molding machine. The transformations of the waste heat from the injection molding machine to the cooling water are dependent on the heat exchange capacity of heat exchangers. To increase the heat exchange capacity of heat exchanger optimization is done which seeks to identify the best parameter combination of heat exchangers. Nine models are made on the basis of taguchi method in NX 10.00 and CFX analysis is carried out in ANSYS 14.5. Result obtained from that gives the best dimension of heat exchanger for minimum outlet temperature of water.

With the right broker, and just a few hundred dollars or pounds, anyone can become a leveraged trader. The products and tools needed are accessible to all: FX, a margin account, CFDs, spread-bets and futures. But this level playing field comes with great risks. Trading with leverage is inherently dangerous. With leverage, losses and costs – the two great killers for traders – are magnified. This does not mean leverage must be avoided altogether, but it does mean that it needs to be used safely. In Leveraged Trading, Robert Carver shows you how to do exactly that, by using a trading system. A trading system can be employed to tackle those twin dangers of serious losses and high costs. The trading systems introduced in this book are simple and carefully designed to use the correct amount of leverage and trade at a suitable frequency. Rob shows how to trade a simple Starter System on its own, on a single instrument and with a single rule for opening positions. He then moves on to show how the Starter System can be adapted, as you gain experience and confidence. The system can be diversified into multiple instruments and new trading rules can be added. For those who wish to go further still, advice on making more complex improvements is included: how to develop your own trading systems, and how to combine a system with your own human judgement, an approach Robert has nicknamed Semi-Automatic Trading. For those trading with leverage, looking for a way to take a controlled approach and manage risk, a properly designed trading system is the answer. Pick up Leveraged Trading and learn how.

For sale used Sony CFD-5550 CD Radio Cassette-Corder in fair conditionThe speaker has been tested and works. It still sounds good as well. The only...

Computational Fluid Dynamics (CFD) and structural analysis play a significant role in the development of technical devices, building construction, weather predictions, biochemistry processes modeling, and in many other fields. With regard to increase computational power increase and improvements in computer modeling techniques, it is expected that the numerical simulations will prevail the traditional methods, such as the experiments and analytical solutions, in the near future. Behind computer modeling, there are complex mathematical apparatuses, physical theories, chemical reactions, etc. Together, these factors make it difficult to understand and use CFD and structural analysis. This book attempts to systematize and provide an easy explanation of computer modeling.

Hardbound. Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences. The objective of this book is to provide a solid foundation for understanding the numerical methods employed in today's CFD and to raise awareness of modern CFD codes through hands-on experience. The book will be an essential reference work for engineers and scientists starting to work in the field of CFD or those who apply CFD codes. The accompanying CD-ROM contains the sources of 1-D and 2-D Euler solvers as well as grid generators.

This three-volume text is designed for use in introductory, intermediate, and advanced courses in computational fluid dynamics (CFD) and computational fluid turbulence (CFT). The fundamentals of computational schemes are established in the first volume, presented in nine chapters. The first seven chapters include basic concepts and introductory topics, whereas Chapters 8 and 9 cover advanced topics. In the second volume, the fundamental concepts are extended for the solution of the Euler, Parabolized Navier-Stokes, and Navier-Stokes equations. Finally, unstructured grid generation schemes, finite volume techniques, and finite element method are explored in the second volume. In the third volume, turbulent flows and several computational procedures for the solution of turbulent flows are addressed. The first two volumes are designed such that they can be easily adapted to two sequential courses in CFD. Students with an interest in fluid mechanics and heat transfer should have sufficient background to undertake these courses. In addition, fundamental knowledge of programming and graphics is essential for the applications of methods presented throughout the text. Typically, the first course is offered at the undergraduate level, whereas the second course can be offered at the graduate level. The third volume of the text is designed for a course with the major emphasis on turbulent flows.

This established, leading textbook, is suitable for courses in CFD. The new edition covers new techniques and methods, as well as considerable expansion of the advanced topics and applications (from one to four chapters).   This book presents the fundamentals of computational fluid mechanics for the novice user. It provides a thorough yet user-friendly introduction to the governing equations and boundary conditions of viscous fluid flows, turbulence and its modelling, and the finite volume method of solving flow problems on computers.  

Computational Fluid Dynamics (CFD) and structural analysis play a significant role in the development of technical devices, building construction, weather predictions, biochemistry processes modeling, and in many other fields. With regard to increase computational power increase and improvements in computer modeling techniques, it is expected that the numerical simulations will prevail the traditional methods, such as the experiments and analytical solutions, in the near future. Behind computer modeling, there are complex mathematical apparatuses, physical theories, chemical reactions, etc. Together, these factors make it difficult to understand and use CFD and structural analysis. This book attempts to systematize and provide an easy explanation of computer modeling.