1594 products were found matching your search for D1O in 1 shops:

Ensure the proper positioning of two objects for seamless alignment with this five-pack of Hillman heavy-duty spacers. With no interior threading, this fastener supports simple installation, and the heavy-duty construction delivers strength and durable use for multiple applications. The zinc-plated finish offers protection against the formation of oxidation. These Hillman heavy-duty spacers are made of stainless steel for reliable performance, and the interior spacing easily fits 1/2-inch bolts to help facilitate assembly requirements.

Ceiling medallions bring your room to life by adding a unique design element that gives personality to an otherwise ordinary ceiling. With a variety of sizes to choose from, you can transform your room into a talking point or simply give a plain ceiling new life. Being made of thermoformed PVC means a lightweight and easy installation, high durability and resistance to water, rot, warping and insects. Our PVC ceiling medallions are perfect for the everyday DIY'er with its low maintenance, easy installation, and affordable prices. Color: Metallic Charcoal.

This LTWFITTING Compression Branch Tee fitting is made of brass for durable. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil, vacuum and air lines.

This LTWFITTING Compression Branch Tee fitting is made of brass for durable. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil, vacuum and air lines.

SharkBite 1/4 in. (3/8 in. O.D.) Push-to-Connect x 3/4 in. Garden Hose Thread Brass 90-Degree Dishwasher Elbow Fitting is the fastest way to connect PEX, Copper, CPVC, PE-RT, or HDPE pipe in any combination. No soldering, clamps, unions, glue, or special tools required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal and backed by a 25-year warranty.

A Spacer is a fastener that is used to create space between two objects, often to properly position them. In the world of electronic components and electronic hardware, spacers are typically used to space circuit boards, panels, doors or gears. Spacers have no interior threading and come in a variety of materials including aluminum, brass, plastic, steel and stainless steel.

Westbrass Round Handle 1-1/2 in. Dia, 12 in. Slip Joint Extension Tube. Use to Extend Length of a Drain to P-Trap or Waste Tube to Wall. Slip Joint Nut and Rubber Washer Included, 100 psi Maximum Working Pressure, 150° Maximum Working Temperature, Solid Brass Construction. Color: RAW Brass.

Rain Bird Drip Irrigation 1/2 in. Blank Distribution Tubing (0.7" OD) is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers. Professional-grade features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage. Tubing is easy to unroll and stake in gardens, flower beds, ground cover or other landscaped areas. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Designed for underground or above-ground installation. Color: Blacks.

Use this extension tube from Westbrass for your 1-1/4 in. O.D. slip joint tubing connections. Extend the length of a lavatory drain tailpiece or trap waste tube by up to 8 in. The classic finish complements your existing drain fixtures while extending the usable overflow. Color: Polished Chrome. Material: Acrylic.

This LTWFITTING Compression Tee fitting is made of brass for durable. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil, vacuum and air lines.

This LTWFITTING Compression Unions are made of brass for durable. Designed for use with aluminum, copper and plastic tubing. Not for use with steel tubing. Plastic tubing requires NPT insert and opt sleeve. This fitting connects to tubing on both ends.

Westbrass Round Handle 1-1/2 in. Dia, 8 in. Slip Joint Extension Tube. Use to Extend Length of a Drain to P-Trap or Waste Tube to Wall. Slip Joint Nut and Rubber Washer Included, 100 psi Maximum Working Pressure, 150° Maximum Working Temperature, Solid Brass Construction. Color: Stainless Steel.

This LTWFITTING Compression Unions are made of brass for durable. Designed for use with aluminum, copper and plastic tubing. Not for use with steel tubing. Plastic tubing requires NPT insert and opt sleeve. This fitting connects to tubing on both ends.

Westbrass round handle 1-1/2 in Dia, 12 in. slip joint extension tube. Use to extend length of a drain to P-trap or waste tube to wall. Slip joint nut and rubber washer included, 100 psi maximum working pressure, 150° maximum working temperature, solid brass construction. Color: Stainless Steel.

Use this extension tube from Westbrass for your 1-1/2 in. O.D. slip joint tubing connections. Extend the length of a lavatory drain tailpiece or trap waste tube by up to 8 in. The classic finish complements your existing drain fixtures while extending the usable overflow. Color: Satin Nickel.

Use this extension tube from Westbrass for your 1-1/2 in. O.D. slip joint tubing connections. Extend the length of a lavatory drain tailpiece or trap waste tube by up to 8 in. The classic finish complements your existing drain fixtures while extending the usable overflow. Color: Polished Chrome.

Westbrass Round Handle 1-1/2 in Dia, 12 in. Slip Joint Extension Tube. Use to Extend Length of a Drain to P-Trap or Waste Tube to Wall. Slip Joint Nut and Rubber Washer Included, 100 psi Maximum Working Pressure, 150° Maximum Working Temperature, Solid Brass Construction. Color: Matte Black.

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal. Color: Chrome. Material: Brass.

Everbilt clear vinyl tubing is BPA-free and manufactured using FDA approved food grade compliant materials. The crystal clear and non-toxic tubing is great for low pressure applications such as beverage dispensing, potable water, beer brewing, kegerators, wine making, milk and food handling and processing, air lines for fish tanks and aquariums, aquaponics, hydroponics, ponds, indoor water gardens, drains, pumps, vacuums, siphons, filters, air conditioning condensation lines, humidifier drain lines, dental, industrial, medical, surgical, laboratory applications for transferring liquid and gas. Everbilt clear vinyl tubing is also resistant to acids, alkalis, gases, liquids and a variety of chemicals. A chemical resistance chart is available in Additional Resources.

SharkBite dual shut off valves are typically used on stub-outs coming out of the wall or through-floor. Used to independently control and shut-off water flow to the fixture for maintenance and repair. Innovative design with 1/2 in. PEX barb inlet and two 3/8 in. compression outlets make for quick installation and quarter-turn full-port brass ball valve makes for easy operation. The SharkBite 1/2 in. barb end can be connected to PEX pipe using copper crimp rings or stainless steel clamps. The 3/8 in. compression outlet with the supplied ferrule and compression nut, can be used with 3/8 in. supply line. Color: Chrome.