538 products were found matching your search for Fips in 3 shops:

SharkBite Max push-to-connect fittings allow you make pipe connections with half the insertion effort while withstanding double the burst pressure. Featuring a newly designed stainless-steel retainer, SharkBite Max delivers additional strength and durability while providing a 400 PSI pressure rating. The re-engineered body allows you to insert the pipe using less effort and doesn't require a PEX tube liner. No soldering, clamps, unions, glue, or special tools are required for installation. They are the fastest way to connect PEX, copper, CPVC, PE-RT and HDPE pipe. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.). Color: Brass.

"The 2"" 720A Pressure vacuum breaker assembly protects against backsiphonage in high health hazard, non-potable residential and commercial irrigation applications. The 720A includes an approved check valve, vacuum relief, two test cocks and inlet and outlet full port resilient seated shut-off valves. It also features a maximum pressure of 150 psi and a temperature range of 33°F to 110°F. The corrosion-resistant internal parts and all bronze bonnet and body construction provides added strength and protection against light freezes, while the test cocks on center line of valve allow for installation versatility."

SharkBite Max flexible water heater connectors are the fastest and easiest way to connect your water heater to existing pipes in your home. A newly designed stainless steel collet retainer delivers additional strength and durability and provides a 200 psi pressure rating. SharkBite Max connectors do not require a PEX tube liner, and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue, or special tools required. After inserting to pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The flexible stainless steel braided hose reduces the need for extra joints or fittings, allowing for faster installs. Available in additional lengths (12 in. to 24 in.) and with integrated ball valve shut off.

The Everbilt Lead Free Ball Valve is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

When you choose the Everbilt stainless steel braided supply line, you're choosing a product that starts with an extruded core of PVC tubing. The core is then over-braided with polyester yarn and another layer of PVC material. The final layer consists of stainless steel braid to form a strong, yet flexible supply line. Brass nuts on both ends of this appliance connector ensure a solid connection on the inlet and outlet ends.

The brass on this pipe tee is durable, lead-free and corrosion resistant. The pipe is shaped like a T to allow for 3-lines and has 3-female threaded connections. This fitting conforms to NSF 61 and 372 and is registered in Mass. Color: Red Brass.

The Everbilt Lead Free Ball Valve is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant. Material: Brass.

The Everbilt Lead Free Ball Valve is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

This is the Hayward 1-1/2 in. Auto-Skim Series Vinyl Inground Skimmer. It is a large capacity automatic surface skimmer. We strive to ensure that your Totally Hayward System operates at maximum efficiency all season long. Material: ABS Plastic.

The 2 in. Copper DWV C x F Female Adapter is used in a piping system not normally under pressure and relying on gravity flow. The adapter has a shallow solder socket and adapts to standard male pipe thread using sweat connection. Use with DWV hard-temper tubing in residential and commercial drain, waste and vent systems.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

SharkBite Max push-to-connect ball valves are the fastest and easiest way to install a new or replacement water shut-off valve. A newly designed stainless steel collet retainer delivers additional strength and durability and provides a 250 psi pressure rating. SharkBite Max fittings and valves don't require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments, and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused. Material: Brass.

The Cash Acme dual check valve prevents polluted water from entering the potable water supply system by preventing the reverse flow of water into supply lines. Constructed of a cast bronze body and brass union inlet connections. Check assemblies are constructed with Stainless Steel springs and EPDM rubber seats and O-rings.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

SharkBite Max push-to-connect fittings are the fastest way to connect PEX, copper, CPVC, or PE-RT pipe. A newly designed stainless steel collet retainer delivers additional strength and durability and provides a 400 PSI pressure rating. SharkBite Max fittings don't require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The fitting can be rotated after installation for quick adjustments, and removing the fitting is just as fast with a disconnect tool, allowing fittings and valves to be changed or reused. Color: Brass.

The Everbilt Lead Free Ball Valve is constructed of heavy forged brass and has a lever handle with Female connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

Flare shutoff cocks are adapter used for higher pressure applications. They are commonly used for commonly used for water, vacuum, and air lines. The fitting is made of durable, corrosion resistant lead-free brass. It conforms to NSF 61 and 372 and is registered in 372.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.