583 products were found matching your search for Makita CW002G 40v Max in 1 shops:

The 40V max XGT 1300 PSI 1.5 GPM Pressure Washer (GWH01Z Tool Only) is ideal for cleaning patio furniture, gardening tools, automotive detailing, windows, decks, porches, fences, driveways, and much more.The High Pressure Washer features three power levels for power and runtime management. It features 1300 PSI and 1.5 GPM on High. There is a self-priming feature and siphoning hose that allows for remote cleaning from most fresh water sources. It features an auto-switching two-bay battery system for two times more run time.Convenience features include a water-resistant battery enclosure for added protection. It also features a telescoping handle and 5.5" wheels for easy transportation. Convenient on-board accessory storage and tool-less attachment adjustment enable smooth transitions between tasks.XGT is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest.

The 40V max XGT Brushless 6-1/2" Plunge Circular Saw Kit (GPS01M1J) delivers precise and more accurate cutting when combined with an optional guide rail system (sold separately). The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful Makita-built brushless motor with Automatic Speed Change Technology, which adjusts cutting speed and torque during the cut for optimum performance.The saw has a variable speed control dial (2,500 - 4,900 RPM), with soft start and an electric brake for added convenience. Constant speed control enables a consistent smooth finish under load. It has a large 2-3/16" cutting capacity at 90-degrees and 1-1/2" at 48-degrees. It has a bevel capability of -1° to 48° and positive stops at 22.5° and 45°.For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GPS01Z is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately).

The 40V max XGT Brushless 7-1/4 in. Circular Saw Kit (GSH01M1) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,000 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-5/8 in. at 90-degrees. This saw is ideal for framers, builders, roofers, forming, and more. The GSH01M1 offers 56-degrees bevel capacity with positive stops at 22.5-degrees, 45-degrees, and 56-degrees. The saw features an electric brake for maximum productivity, dual L.E.D. lights, and a die-cast magnesium base and blade guard, which combines durability with less weight. Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance. The saw is also equipped with Makita's Extreme Protection Technology (XPT), is a series of integrated seals designed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components. Auto-Start Wireless System (AWS) uses Bluetooth technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This Promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40V max XGT Brushless Cordless ½" Hammer Driver-Drill (GPH01) and 4-Speed Impact Driver (GDT01) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. The GPH01 is powered by a Makita-built brushless motor that delivers 1,250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers two speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control. The GDT01 is also powered by a Makita-built brushless motor, and that delivers 1,950 in.lbs. of Max Torque to outpower other impact drivers in heavy-load applications. An ultra-smooth variable speed trigger provides optimum control, and a one-touch 4-speed power selector button under the chuck allows users to adjust speed easily. It has 4 speed settings (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM and 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM. The hammer driver-drill and impact driver are engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. Reinforced gear housing provides additional durability on the job site.

The 40V max XGT Brushless Cordless 4-Speed Mid-Torque 1/2" Sq. Drive Impact Wrench with Detent Anvil (GWT08Z, tool only) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. The GWT08Z is powered by a Makita-built motor for longer run time. The brushless motor delivers 560 ft.lbs. of Fastening Torque and 810 ft.lbs. of Nut-Busting Torque. The electronically controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Additional precision features include three forward and three reverse rotation auto-stop modes, and a full-speed mode function that reduces the trigger pull to reach full speed. The GWT08Z features the exclusive Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components. This Promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40V max XGT Brushless 12" Dual-Bevel Sliding Compound Miter Saw Kit (GSL04M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8" x 15" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life, with direct drive that delivers 3,600 RPM for faster cutting performance, with no belts to slip or replace. Extension wings are included for cutting longer materials, and retract for easier storage. An electric brake provides maximum productivity. An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL04M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately). This promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40V max XGT Brushless Cordless ½" Hammer Driver-Drill (GPH01) and 4-Speed Impact Driver (GDT01) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. The GPH01 is powered by a Makita-built brushless motor that delivers 1,250 in. lbs. . of Max Torque, outpowering other driver-drills in heavy-load applications. It offers two speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control. The GDT01 is also powered by a Makita-built brushless motor, and that delivers 1,950 in. lbs. . of Max Torque to outpower other impact drivers in heavy-load applications. An ultra-smooth variable speed trigger provides optimum control, and a one-touch 4-speed power selector button under the chuck allows users to adjust speed easily. It has 4 speed settings (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM and 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM. The hammer driver-drill and impact driver are engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. Reinforced gear housing provides additional durability on the job site. This Promotion also comes with a bonus BL4025 40V max XGT 2.5Ah Battery.

The 40V max XGT Brushless 12" Dual-Bevel Sliding Compound Miter Saw Kit (GSL04M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8" x 15" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life, with direct drive that delivers 3,600 RPM for faster cutting performance, with no belts to slip or replace. Extension wings are included for cutting longer materials, and retract for easier storage. An electric brake provides maximum productivity. An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. For improved efficiency, it is capable of wirelessly starting a connected dust management solution. Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL04M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. An AWS transmitter is needed (sold separately).

The 40V max XGT Brushless 8-1/2" Dual-Bevel Sliding Compound Miter Saw (GSL02Z, Tool Only) provides 4,800 RPM for faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 2-3/4" x 12-1/4" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life. The GSL02Z features Automatic Speed Change technology to adjust cutting speed and torque under load for optimum performance and a soft start to suppress start-up reaction for smooth start-ups and longer gear life. Extension wings all for cutting longer materials and retract for easier storage. An electric brake provides maximum productivity. For improved efficiency, it is equipped with Auto-start Wireless System technology. AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL02Z is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.

The 40V Max XGT Recipro Saw (GRJ01Z, tool only) delivers faster cutting speed for cutting and demolition applications. Makita-built variable 2-speed brushless motor delivers 0-2,300 (low) and 0-3,000 (high) strokes per minute. XGT technology delivers up to 145 cuts per charge in 2x10 SPF lumber using one XGT 4.0 Ah Battery (sold separately). The XRJ04T is equipped with efficiency features for faster cutting. The long 1-1/4 in. stroke length increases cutting efficiency, and the refined crank mechanism design minimizes blade deflection and reduces vibration. Convenience features include a large 2-finger variable speed trigger, electric brake, built-in L.E.D. light and a tool-less blade change for faster blade installation and removal. Ergonomically designed handle for difficult cutting applications, such as overhead. XGT is a system of equipment, tools, batteries and chargers utilizing 40V Max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the competition. This promotion also comes with a bonus GPH01Z 40V max XGT Brushless Cordless 1/2" Hammer Driver-Drill, Tool Only.

The 40V Max XGT Brushless Cordless ½" Hammer Driver-Drill (GPH01Z, tool only) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry. The GPH01Z is powered by a Makita-built brushless motor that delivers 1,250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers up to 35% faster drilling speed, compared to Makita's 18V LXT Cordless 1/2 in. Hammer Driver-Drill (XPH07), with 2 speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control. An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop. The GPH01Z is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability. This Promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40-Volt max XGT Brushless Cordless 4-Speed Mid-Torque 1/2 in. Sq. Drive Impact Wrench Kit with Friction Ring Anvil (GWT07D) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. The GWT07D is powered by a Makita-built motor for longer run time. The brushless motor delivers 560 ft. lbs. of Fastening Torque and 810 ft. lbs. of Nut-Busting Torque. The electronically controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Additional precision features include three forward and three reverse rotation auto-stop modes, and a full-speed mode function that reduces the trigger pull to reach full speed. The GWT07D features the exclusive Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components. This promotion also comes with a bonus GAG13Z 40-Volt max XGT Brushless Cordless 4-1/2 in. / 5 in. X-LOCK Paddle Switch Angle Grinder, with Electric Brake, Tool Only.

The 40V max XGT Brushless ½" Right Angle Drill (GAD01M1) offers freedom from the cord for demanding drilling applications. A Makita-built brushless motor, two-speed transmission, and variable speeds (0-350 RPM, 0-1,400 RPM), deliver for maximum efficiency and wide range of drilling applications. It can drill up to 6-1/4" holes with hole saws and 4-5/8" holes with self-feed bits.Added features include a torque limiter to reduce gear damage, soft start for smooth start-ups, an electric brake for maximum productivity, and dual L.E.D. lights to illuminate the work area. It includes a side handle which attaches to either side of the tool.The drill features Extreme Protection Technology (XPT), a series of integrated seals designed to improve a tool's operation in harsh conditions. Water and solid debris that enter a tool are redirected through carefully engineered channels and ducts to prevent damage to key components, such as triggers, motors, and other electronics.XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

The 40V max XGT Brushless 10" Dual-Bevel Sliding Compound Miter Saw Kit (GSL03M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 2-13/16" x 12" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life. Extension wings all for cutting longer materials and retract for easier storage. An electric brake provides maximum productivity. For improved efficiency, it is equipped with Auto-start Wireless System technology. AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL03M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.

The 40V max XGT Brushless Cordless 4-Speed Mid-Torque 1/2" Sq. Drive Impact Wrench Kit with Friction Ring Anvil (GWT07D) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. The GWT07D is powered by a Makita-built motor for longer run time. The brushless motor delivers 560 ft.lbs. of Fastening Torque and 810 ft.lbs. of Nut-Busting Torque. The electronically controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Additional precision features include three forward and three reverse rotation auto-stop modes, and a full-speed mode function that reduces the trigger pull to reach full speed. The GWT07D features the exclusive Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components.

The 40V max XGT Brushless Cordless 4-Speed Mid-Torque 1/2" Sq. Drive Impact Wrench with Detent Anvil (GWT08Z, tool only) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. The GWT08Z is powered by a Makita-built motor for longer run time. The brushless motor delivers 560 ft.lbs. of Fastening Torque and 810 ft.lbs. of Nut-Busting Torque. The electronically controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Additional precision features include three forward and three reverse rotation auto-stop modes, and a full-speed mode function that reduces the trigger pull to reach full speed. The GWT08Z features the exclusive Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components.

The 40V max XGT Brushless Cordless 4-Pc. Combo Kit (GT401M1D1) offers the products needed for demanding drilling, driving, and cutting applications.The Hammer Driver-Drill is powered by a Makita-built brushless motor that delivers 1,250 in. lbs. of Max Torque. It offers two speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM).The Impact Driver is also powered by a Makita-built brushless motor and delivers 1,950 in.lbs. of Max Torque. It has 4 speed settings (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM and 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM.The Recipro Saw delivers up to 3,000 SPM and has a 1-1/4 in. stroke length for faster cutting.The high-luminance 4 L.E.D. flashlight provides 160 Lumens. It delivers up to 55 hours of continuous illumination on a single charge (when using the 40V max XGT 4.0Ah Battery).The tools in this combo kit are engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. Reinforced gear housing provides additional durability on the job site.XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

The 40V Max XGT Brushless Cordless 4-1/2 in. / 5 in. Paddle Switch Angle Grinder with Electric Brake (GAG03Z, tool only) delivers corded grinding performance without the cord for the most demanding applications. It's powered by a Makita-built brushless motor which delivers 8,500 RPM for heavy-load applications and increased power and speed. The GAG03Z offers up to 60% faster cutting speed when cutting #5 (5/8 in.) rebar. It is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more. An electric current limiter helps protect the motor from overload in high-torque applications. Makita's exclusive Automatic Speed Change technology automatically adjusts speed and torque during operation for optimal performance. Additional features include an electric brake that stops the grinding or cut-off wheel in 2-seconds or less and Active Feedback-sensing Technology (AFT) that turns the motor off if rotation of the wheel is forced to a stop. A large paddle switch provides power-start press points at multiple grip positions. A quick guard rotation provides tool-less adjustments for increased productivity. Anti-restart protection is engineered to prevent motor start-up when the battery is inserted while the switch is locked on. A soft start suppresses start-up reaction and provides smooth start-ups. This Promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40V max XGT Brushless 10" Dual-Bevel Sliding Compound Miter Saw Kit (GSL03M1) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 2-13/16" x 12" cutting capacity at 90-degrees. The saw miters 0° to 60° left and right and bevels from 0° to 48° (left and right). The efficient brushless motor runs cooler and more efficiently for longer tool life. Extension wings all for cutting longer materials and retract for easier storage. An electric brake provides maximum productivity. For improved efficiency, it is equipped with Auto-start Wireless System technology. AWS utilizes Bluetooth technology for wireless communication between the tool and dust extractor (sold separately). When the trigger of the AWS-equipped GSL03M1 is engaged, the AWS-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running. This promotion also comes with a bonus BL4040 40V max XGT 4.0Ah Battery.

The 40V max XGT Brushless Cordless 4-Speed Mid-Torque 1/2" Sq. Drive Impact Wrench Kit with Detent Anvil (GWT08D) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. The GWT08D is powered by a Makita-built motor for longer run time. The brushless motor delivers 560 ft.lbs. of Fastening Torque and 810 ft.lbs. of Nut-Busting Torque. The electronically controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Additional precision features include three forward and three reverse rotation auto-stop modes, and a full-speed mode function that reduces the trigger pull to reach full speed. The GWT08D features the exclusive Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve a tool's operation in harsh conditions by channeling water and dust from key internal components.