28 products were found matching your search for Milwaukee FELD F ELEKTROMOTOR in 3 shops:

The MILWAUKEE M18 REDLITHIUM XC5.0 Starter Kit delivers up to 2.5X more runtime, 20% more power and 2X more recharges than standard lithium-ion batteries. The lithium-ion battery pack features superior pack construction, electronics, and performance providing users more work per charge and more work over pack life than any battery on the market. The rechargeable battery also delivers users with 5.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0°F/-18°C. This protection routes water away from the electronics and out of the battery pack, extends the users' battery run-time and life by minimizing heat, and prevents pack failures from vibration or drops. Built-in REDLINK Intelligence protects the battery from overloads, while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize battery life. The MILWAUKEE M18 FUEL 1/2" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts.

The Milwaukee M18 FUEL 1/2 in. Compact Impact Wrench w/Friction Ring Kit is the most compact in its class, delivering users the most access in tight spaces, up to 250 ft./lbs. of nut-busting torque and maximum workspace visibility. This battery-powered impact wrench measures only 4.9 in. L with a POWERSTATE Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. Milwaukee 1/2 in. compact impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers users greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Milwaukee REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating and over-discharge. Milwaukee M18 REDLITHIUM XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases and solvents.

The Milwaukee M18 FUEL 1/2 in. Mid-Torque Impact Wrench w/Friction Ring Kit delivers the best power to weight ratio, most access in tight spaces and faster removal speed. It provides 650 ft./lbs. of nut-busting torque and only weighs 5.1 lbs., making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. Milwaukee 1/2 in. Impact Wrench is the most compact in its class, giving users access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 35 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Milwaukee REDLINK PLUS Intelligence ensures maximum performance, protecting the tool against overloads, over-heating and over-discharge. Milwaukee M18 REDLITHIUM XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases and solvents.

The Milwaukee M18 FUEL 3/8 in. Mid-Torque Impact Wrench w/Friction Ring delivers the best power to weight ratio, most access in tight spaces and faster removal speed. It provides 600 ft./lbs. of nut-busting torque and only weighs 5.0 lbs., making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. Milwaukee 3/8 in. Impact Wrench is the most compact in its class, giving users access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 35 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Milwaukee REDLINK PLUS Intelligence ensures maximum performance, protecting the tool against overloads, over-heating and over-discharge. Milwaukee M18 REDLITHIUM XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases and solvents.

The Milwaukee M18 FUEL 3/8 in. Compact Impact Wrench w/Friction Ring is the most compact in its class, delivering users the most access in tight spaces, up to 250 ft./lbs. of nut-busting torque and maximum workspace visibility. This battery-powered impact wrench measures only 4.8 in. L with a POWERSTATE Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The 3/8 in. Compact Impact Wrench has tri-LEDs that surround the anvil to deliver users brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Milwaukee REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating and over-discharge. Milwaukee M18 REDLITHIUM XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases and solvents.

The MILWAUKEE M18 FUEL 3/8 in. Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft. lbs. of nut-busting torque and only weighs 5.0 lbs., making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This cordless impact wrench is the most compact in its class, giving users access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 35 ft. lbs. of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM battery pack (not included) fits M18 tools, delivering more work per charge and more work over the life of the pack.

The Milwaukee M18 FUEL w/ONE-KEY High Torque 1/2 in. Impact Wrench with Friction Ring provides the Most Powerful, Most Compact and the Most Repeatable Impact Wrench in the industry. The Milwaukee POWERSTATE Brushless motor delivers up to 1,000 ft./lbs. of fastening torque and 1,400 ft./lbs. of nut-busting torque, providing you with a cordless solution that will eliminate the need for corded Impact Wrenches. The industry's most compact cordless High Torque Impact wrench at 8.39 in. Lh allows for more access in tight spaces. Milwaukee M18 REDLITHIUM XC5.0 Resistant Battery Packs provide increased protection against oils, greases and solvents. Compatible with Milwaukee ONE-KEY, this is the industry's first High Torque Impact Wrench that wirelessly connects to a smartphone to Customize, Track and Manage a tool's performance and location. Tool Customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials and complete control over output speed and power for the specific application at hand. Users now have a tool that delivers the most repeatable torque output in the industry. This solution will get you close to your targeted torque value, reducing the likelihood of significant under or over-torque. Users will experience less rework, less damage and increased productivity that will get them closer to their torque target and finish with a calibrated torque device to reach their targeted torque value.

The Milwaukee M18 FUEL w/ONE-KEY High Torque 3/4 in. Impact Wrench with Friction Ring provides the Most Powerful, Most Compact and the Most Repeatable Impact Wrench in the industry. The POWERSTATE Brushless motor delivers up to 1,200 ft./lbs. of fastening torque and 1500 ft./lbs. of nut-busting torque, providing users with a cordless solution that will eliminate the need for corded Impact Wrenches. The industry's most compact cordless High Torque Impact wrench at 8.59 in. L allows for more access in tight spaces. Milwaukee M18 REDLITHIUM XC5.0 Resistant Battery Packs provide increased protection against oils, greases and solvents. Compatible with ONE-KEY, this is the industry's first High Torque Impact Wrench that wirelessly connects to a smartphone to Customize, Track and Manage a tool's performance and location. Tool Customization allows users to connect to the tool and access predetermined set-ups for specific fasteners and materials and have complete control over output speed and power for the specific application at hand. Users now have a tool that delivers the most repeatable torque output in the industry. This solution will get them close to their targeted torque value, reducing the likelihood of significant under or over-torque. Users will experience less rework, less damage and increased productivity that will get them closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value.

The Milwaukee 10-Piece 1000V Insulated Screwdrivers are only UL Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 and NFPA 70E standards and meet the OSHA insulated tool requirement. The insulated screwdriver set is flame retardant and impact resistant and features a dual layer insulation for a visual wear indication for tool replacement. This combination of extreme durability and functionality of insulated electrical tools confirms Milwaukee's commitment to providing innovative, durable solutions to the end user. Milwaukee 6 in 1 Combination Pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe, and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation, and won't open when stored in a pouch or backpack. Milwaukee 6 in 1 Combination Pliers deliver maximum productivity for the trades. The Milwaukee 48-22-3079 is perfect for the toughest of jobsites. This set includes one #1 Phillips, one #2 Phillips, one #3 Phillips, one 1/4 in. Slotted, one 5/16 in. Slotted, one Slotted, one SQ1, one SQ2, one SQ3, one ECX #1, one fitted zipper carrying case, and one Combination Electricians 6-in-1 Wire Strippers Pliers.

The Milwaukee 10-Piece 1000V Insulated Screwdrivers are only UL Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 and NFPA 70E standards and meet the OSHA insulated tool requirement. The insulated screwdriver set is flame retardant and impact resistant and features a dual layer insulation for a visual wear indication for tool replacement. This combination of extreme durability and functionality of insulated electrical tools confirms Milwaukee's commitment to providing innovative, durable solutions to the end user. The Milwaukee 7-in-1 High-Leverage Combination Pliers feature 7 core functions for electrical installation. These Milwaukee pliers feature a crimper, wire cutter, wire stripper, loop maker, reamer, and bolt cutter. The wide jaw pliers make grabbing and twisting wire easy, while the crimper provides users with added functionality when working with both insulated and non-insulated terminals. The wire cutter, wire stripper, and loop maker allow users to make quick wire preparation. The built-in reamer allows users to ream ½ in. through 1 in. conduit, while the bolt cutter cuts #6 and #8 bolts. This set includes one #1 Phillips, one #2 Phillips, one #3 Phillips, one 1/4 in. Slotted, one 5/16 in. Slotted, one Slotted, one SQ1, one SQ2, one SQ3, one ECX #1, a fitted zipper carrying case, and one 7-in-1 combo pliers.

This MILWAUKEE® bundle includes 1000V Insulated Screwdrivers and 6-in-1 Pliers with Comfort Grip for hand tools that deliver maximum productivity for the trades, perfect for the toughest of jobsites.The insulated screwdrivers are the only UL® Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards and meet the OSHA insulated tool requirement. Insulated Screwdrivers are flame retardant and impact resistant and feature dual layer insulation that provides a visual wear indication for tool replacement. Milwaukee 6-in-1 pliers have a revolutionary, forged dual head design for wire stripping and needle nose functionality. The combination pliers cut #6 and #8 bolts and have a swing-lock design for fast one-handed operation that won’t open when stored in user’s pouch or backpack.

The MILWAUKEE N95 Valved Respirators are designed to help users stay cool while providing them with a better fit. The respirator valve reduces the construction mask's internal temperature by 10 degree F keeping users cool while at work. The respirator masks feature two soft adjustable straps and a flexible nose bridge allowing users to achieve a better fit. The respirator masks are NIOSH N95 approved for non-harmful sanding, grinding, sawing and insulation particles. Color: White.

The Milwaukee N95 Valved Respirators are designed to help users stay cool while providing them with a better fit. The respirator valve reduces the construction mask in internal temperature by 10°F keeping users cool while at work. The respirator masks feature 2 soft adjustable straps and a flexible nose bridge allowing users to achieve a better fit. The respirator masks are NIOSH N95 approved for non-harmful sanding, grinding, sawing and insulation particles. Color: White.

The Milwaukee 10-Piece 1000V Insulated Screwdrivers are only UL Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 and NFPA 70E standards and meet the OSHA insulated tool requirement. The insulated screwdriver set is flame retardant and impact resistant and features a dual layer insulation for a visual wear indication for tool replacement. This combination of extreme durability and functionality of insulated electrical tools confirms Milwaukee's commitment to providing innovative, durable solutions to the end user. The 15 in. PACKOUT tote features an impact-resistant molded base that connects with all other PACKOUT system components via integrated locking cleats. The durable tote is constructed with 1680D ballistic material and all-metal hardware so it can withstand harsh jobsite environments. The 15 in. storage tote features 31 pockets, including 2 zippered pockets, to organize tools and accessories for easy access and visibility. The PACKOUT modular storage allows users to customize and build their own storage system to easily transport and organize tools and accessories. This set includes one #1 Phillips, one #2 Phillips, one #3 Phillips, one 1/4 in. Slotted, one 5/16 in. Slotted, one Slotted, one SQ1, one SQ2, one SQ3, one ECX #1, one fitted zipper carrying case and one 15 in. PACKOUT Tote.

This Variable Temperature Heat Gun offers a range from 90°F to 1050°F. With LED readout technology, you can monitor the temperature via a digital display. It shows temperatures in increments of 10°.

The Milwaukee 10-Piece 1000V Insulated Screwdrivers are only UL Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 and NFPA 70E standards and meet the OSHA insulated tool requirement. The insulated screwdriver set is flame retardant and impact resistant and features a dual layer insulation for a visual wear indication for tool replacement. This combination of extreme durability and functionality of insulated electrical tools confirms Milwaukee's commitment to providing innovative, durable solutions to the end user. The work pouch is designed with professional tradesmen in mind and built with 1680 Denier Nylon, Riveted Seams and All Metal Hardware. The Electricians Work Pouch with Quick Adjust Belt provides users with 15 pockets to organize their tools and incorporates a solid base that allows the bag to remain upright when set on a flat surface. The integrated handle allows the bag to be easily transported from and task to task and the metal tape measure clip securely stores a tape measure for easy access. A plastic lined puncture-resistant pocket allows users to store sharp objects, such as jab saws, without worry of damaging their bags. This set includes one #1 Phillips, one #2 Phillips, one #3 Phillips, one 1/4 in. Slotted, one 5/16 in. Slotted, one Slotted, one SQ1, one SQ2, one SQ3, one ECX #1, one fitted zipper carrying case and one 15-Pocket Electricians Work Pouch/Holster.

The MILWAUKEE 4-Piece 1000V Insulated Screwdrivers are the only UL Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards and meet the OSHA insulated tool requirement. This 4 piece insulated screwdriver set is flame retardant and impact resistant, providing professional users with an uncompromising safety rating. The dual layer insulation offers a visual wear indicator to issue a replacement warning to the user for maximum jobsite protection. This four piece set includes (1) 1/4 in. slotted, (1) 3/8 in. slotted, (1) #1 Phillips, (1) #2 Phillips and a case.

The M12 XC High Capacity REDLITHIUM Battery is designed with superior pack construction, electronics and performance to optimize work per charge and work over pack life. It offers 3.0 Amp hours of runtime. With built-in Milwaukee durability, this battery runs cooler and performs in climates below 0°F/-18°C. Managed by Milwaukee's exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Use this REDLITHIUM extended-capacity battery to power all of your Milwaukee M12 cordless power tools.

The Milwaukee 3/4 in. PEX Crimp Jaw for the M12 FORCE LOGIC Press Tool provides users with an easy solution for PEX crimp installations, eliminating the repetitive strain required with hand tools. These press tool jaws are compatible with F1807 and F2159 connections. Milwaukee optimized this crimp jaw with an easy-open, inline design for one-handed pressing when used with the M12 FORCE LOGIC Press Tool, the smallest, most intelligent Milwaukee press tool. These PEX crimp jaws offer the highest confidence for quality connections, as the spring-loaded opening grips the ring for precise alignment to the fitting, and a green light on the press tool indicates a completed crimp.

This MILWAUKEE® bundle includes the 1000V Insulated Screwdrivers, 10” 6-in-1 Combination Electricians Wire Strippers, and 7” Billet Torpedo Level offer electricians durable hand tools. The 1000V Insulated Screwdrivers are the only UL® Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards and meet the OSHA insulated tool requirement. The Milwaukee insulated screwdrivers are flame retardant and impact resistant with a dual layer insulation for maximum protection and a visual wear indicator to issue a replacement warning to the user. The 6-in-1 pliers feature a forged dual head design for wire stripping and needle nose functionality. Their unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe, and a curved blade allows for clean cuts through larger wire sizes. The Milwaukee billet torpedo level provides over 2X the holding power of leading competitors with a maximized viewing area allowing the user to make fast and accurate readings in any position. The magnetic torpedo level has optimized top and back side pipe grooves make this the optimal tool for working with both small and large diameter pipes. The compact billet level also offers a weld clearance and laser etched ruled edge.