940 products were found matching your search for PDF XChange Tools 1000 Benutzer in 5 shops:

Keep your garage organized and ready for work with the Craftsman S1000 Series 5-Drawer Chest. This storage solution features sturdy construction, ball-bearing drawer slides and includes drawer liners. With 5 easy-open drawers and 3,589 cu. in. of internal space, this S1000 5-Drawer Chest provides the storage you need for a workshop you can take pride in.

This tool set includes the Dual Range Non-Contact Voltage Tester with Flashlight, 12 - 1000-Volt AC (Cat. No. NCVT-3P) and the 4-in-1 Precision Electronics Screwdriver (Cat. No. 32581). The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site. Klein Tools electronics screwdrivers are designed for precision work, and feature a swivel cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision milled to fit screw openings securely. Rotating caps and Klein's exclusive Cushion-Grip handles offer outstanding comfort and control. Corrosion-resistant chrome plated barrel that includes two double-ended bits that exceed ANSI standards.

The Utility Insulated tool kit features 13 of the essential tools the Lineman needs. The custom case includes 2 pallets with pockets custom-fit for each tool, a piano-hinged case cover that has both a combination lock and two key-locked latches for security. This hardcase also has extra storage space behind the pallets for important papers or other accessories.

This 6-Piece Made in the USA Insulated Screwdriver Set features assorted Klein Tools' Slotted, Phillips and Square tip screwdrivers. Each screwdriver is individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock.

The Utility Insulated tool kit features 13 of the essential tools the Lineman needs. The light, compact, soft roll-up carrying case provides protective storage with custom-fitted pockets for each tool. The padded, adjustable shoulder strap lets you throw this kit over your shoulder and go. Made in the USA.

This 3-Piece Made in the USA Insulated Screwdriver Set features assorted Klein Tools' screwdrivers. Each is individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock.

This 3-Piece Tool Set includes Cat. No. NCVT2P Dual Range Non-Contact Voltage Tester, 12 - 1000-Volt AC, Cat. No. ET60 AC/DC Voltage Tester, and Cat. No. RT210 GFCI Receptacle Tester. The NCVT2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. The ET60 is a solid-state, low impedance, electronic voltage tester. It measures AC/DC voltages up to 600V. The ET60 does NOT require batteries; it is powered by the applied voltage. The GFCI Outlet tester is designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

This 2-Piece Voltage Tester and Multi-bit Screwdriver Tool Set includes the Dual Range Non-Contact Voltage Tester, 12 - 1000-Volt AC (Cat. No. NCVT2P) and the 11-in-1 Multi-bit Screwdriver (Cat. No. 32500). The NCVT2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The Multi-bit Screwdriver / Nut Driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for quick and easy switch out. The Cushion-Grip handle allows for greater torque and comfort.

The NCVT3PKIT from Klein Tools includes a dual-range, non-contact voltage tester with integrated Flashlight, and an AC/DC Voltage Tester. The NCVT-3P with flashlight is a non-contact voltage tester that detects 12 to 1000V AC and 70 to 1000V AC, and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. The ET45 AC/DC Voltage Tester is designed as a simple, easy to use tester to check, verify or troubleshoot common residential electrical applications. This tester does not require batteries, and features a pocket clip for convenient carrying.

The CAMO WedgeClip can be installed on any board, at any angle, in any environment. The Wedge clip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill not an impact driver during install. Install deck clips standing up with the CAMO DRIVE system and save your back and knees. Color: Black.

The CAMO EDGE Clip is the strongest, fastest, hidden deck clip available, helping you install grooved decking in half the time. The universal hidden deck clip is approved for use with all leading composite, PVC, capped composite, and hardwood grooved boards. CAMO EDGE Clips offer superior strength and holding power thanks to their Stainless Steel screw and gusset. The 1-3/4 x #7 screw buries down deeply into the joist while the gusset fits into the groove of the board, securing it down when the screw is fastened. Industry leading strength meets the easiest install experience with CAMO EDGE Clips. The pre-assembled one-pass fasteners have a plastic spacer that grips the joist and creates a 3/16 in. gap to allow for proper airflow and drainage. In addition, the fastener stays in place with no partial installation, so you can lay your field of deck boards before fastening, saving even more time. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill not an impact driver during install. Install deck clips standing up with the CAMO DRIVE system and save your back and knees. Color: Black.

The CAMO EDGE Clip is the strongest, fastest, hidden deck clip available, helping you install grooved decking in half the time. The universal hidden deck clip is approved for use with all leading composite, PVC, capped composite, and hardwood grooved boards. CAMO EDGE Clips offer superior strength and holding power thanks to their Stainless Steel screw and gusset. The screw buries down deeply into the joist while the gusset fits into the groove of the board, securing it down when the screw is fastened. Industry leading strength meets the easiest install experience with CAMO EDGE Clips. The pre-assembled one-pass fasteners have a plastic spacer that grips the joist and creates a 3/16 in. gap to allow for proper airflow and drainage. In addition, the fastener stays in place with no partial installation, so you can lay your field of deck boards before fastening, saving even more time. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill, not an impact driver during install. Install deck clips standing up with the CAMO DRIVE system and save your back and knees. Color: Black.

Why settle for less when you can have the best with the Whirlwind Belden 8281 Crimp Die Tool? This high-quality, precision-engineered tool is specifically designed for compatibility with the Kings KTH-1000 crimp tool. It's an essential piece of equipment for any professional or hobbyist looking to achieve perfect, secure crimps every time. The Belden 8281 Crimp Die Tool is a testament to Whirlwind's commitment to superior craftsmanship and functionality. It's built to last, ensuring you can rely on it for all your crimping needs. Whether you're working on a complex electronics project or making routine repairs, this tool delivers consistent, top-notch performance. In the world of electronics, precision and reliability are key. That's why the Whirlwind Belden 8281 Crimp Die Tool is a must-have for anyone serious about their craft. It's not just a tool, it's a partner in your pursuit of excellence in electronics.

The CAMO WedgeClip can be installed on any board, at any angle, in any environment. The WedgeClip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill-not an impact driver-during install. Install deck clips standing up with the CAMO DRIVE system and save your back and knees. Color: Black.

The Milwaukee 1000V insulated screwdrivers are the only UL classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 and NFPA 70E standards and meet the OSHA insulated tool requirement. Providing an uncompromising safety rating, Milwaukee insulated screwdrivers are flame retardant and impact resistant and feature a dual layer insulation for maximum protection and a visual wear indicator to issue a replacement warning to the user.

The Milwaukee 5-Piece 1000V Insulated Hand Tool Kit includes key solutions for electrical work. The 1000V Insulated 9 in. Lineman's Pliers and 1000V Insulated 8 in. Diagonal Cutting Pliers both feature maximum leverage for easy cuts. The diagonal cutting pliers have a tapered nose for easier access and flush cuts. The 1000V Insulated Wire Stripper accurately removes insulation from 10-18 solid and 12-20 stranded wire. The 1000V Insulated Slim Tip Screwdrivers feature a flush insulation layer at the screwdriver tip - delivering easy access into tight spaces. The Milwaukee 5-Piece 1000V Insulated Hand Tool Kit is UL classified and certified to IEC 60900 and ASTM F1505 standards for insulated hand tools and is backed by Milwaukee 's Limited Lifetime Warranty. The MILWAUKEE FASTBACK 6-in-1 Folding Utility Knife features a press and flip mechanism providing users with an easy, one-handed opening. The 6-in-1 knife has a wire stripper, folding screwdriver, and a fold-out 1/4 in. bit holder. The bit holder includes a reversible Phillips #2 and slotted 1/4 in. bit. The Milwaukee 25 ft. Compact Auto-Lock Tape Measures deliver up to 12 ft. of reach. The auto-lock design automatically locks the user's blade in place for quick and efficient measuring.

Get the job done with these Milwaukee 10-piece 1000-Volt insulated screwdrivers. Dual layer insulation allows visual wear indication for tool replacement. It comes with an EVA foam-fitted zipper carrying case and lanyard holes to stop tool drops. For lasting use, this set is flame retardant and impact resistant.The Milwaukee Automatic Wire Stripper and Cutter delivers quick, 1-handed stripping, for 8-20 Solid and 10-22 Stranded AWG wire. This automatic wire stripper cleanly strips up to 1 in. of insulation in a single pass. The built-in cutter is conveniently located in the center of the tool for maximum leverage when cutting copper wires. The comfortable, molded grip handles offer added comfort for all-day use. All Milwaukee wire strippers are backed by their Limited Lifetime Warranty.

VEVOR Heavy Furniture Movers, Carbon Steel Furniture Mover Dolly with 4 360° PP Swivel Wheels, Furniture Lift Mover Tool Set for Moving Equipment Heavy Furniture Refrigerator Sofa, 1000Lbs CapacityLess Transporting EffortHigh EfficiencyBuilt to LastEasy MovementEasy to UseWide ApplicationsDolly Quantity: 4 PCS,Lifter Size: Ф0.7 x L24.8 in/Ф19 x L630 mm,Dolly Size: 6.9 x 6.4 x 3.1 in/174 x 162 x 78 mm,PP Wheel Size: Ф1.9 x 0.8 in/Ф49 x 20 mm,Heightening Pad Size: 3 x 3 x 1.3 in/75 x 75 x 32 mm,Item Model Number: JYF-450,Product Weight: 9.3 lbs/4.2 kg,Non-Slip Pad Size: 6.3 x 6.3 x 0.1 in/160 x 160 x 2.5 mm,Total Load Capacity: 1000 lbs/454 kg,Main Material: Carbon Steel

VEVOR Banding Strapping Kit. VEVOR strapping tools keep your straps snug and your stuff secure. Whether you're moving, managing a warehouse, or handling pallets at the dock, they've got you covered. Say goodbye to chaos and save storage space. Perfect for bundling glass, pipes, materials, fruits, and more. Color: Orange. Material: Aluminum Alloy.

The MILWAUKEE Adjustable Electricians Work Belt and 1000 Volt Insulated Screwdriver Set with Case provide durable and comfortable work gear and tool solutions for the professional users. The adjustable work belt contains 29 pockets for keeping tools organized and a solid base allows the belt to remain upright when set on a flat surface. Milwaukee 1000V Insulated Screwdrivers are the only UL Classified screwdrivers tested to IEC 60900:2012, ASTM F1505-10 & NFPA 70E standards and meet the OSHA insulated tool requirement. The insulated screwdriver set is flame retardant and impact resistant and features a dual layer insulation for a visual wear indication for tool replacement. This combination of extreme durability and functionality of insulated electrical tools and puncture resistant work belts confirms Milwaukee's commitment to providing innovative, durable solutions to the end user. Color: Red. Material: Nylon.