669 products were found matching your search for Plug In Digital Marcus in 5 shops:

- SLXD3 Digital Wireless Plug-On Transmitter -SLXD3 Plug-On Digital Wireless Transmitter converts any XLR source, including dynamic and condenser microphones, for use as an SLX-D wireless transmitter. Featuring a patented locking ring for a secure, wobble-free connection, the SLXD3 sends 24-bit digital audio from any XLR source to an SLXD4 or SLXD5 Digital Wireless receiver via rock-solid RF connection. Use IR Sync to pair transmitters easily and quickly with your choice of SLX-D wireless receiver.A full suite of optional rechargeability accessories enables wireless excellence, wherever required, and the bright OLED screen displays battery life in hours and minutes when used with the optional SB903 Rechargeable Lithium-Ion batteries. Includes SLXD3 plug-on transmitter, a pair of AA alkaline batteries, zippered carrying pouch and a leather protective sleeve with an integrated belt clip.Features:• Convert any XLR source for use within SLX-D wireless systems• Provides +12-48 VDC phantom power for use with condenser microphones• Patented locking mechanism for secure, wobble-free connection• Transparent 24-bit digital audio• Extended 20 Hz to 20 kHz frequency range (microphone dependent)• 118 dB dynamic range• Digital predictive switching diversity• Switchable 1/10/30 mW power levels (region- and band-dependent)• 44 MHz tuning bandwidth (region dependent)• 32 available channels per frequency band (region dependent)Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band• Easy pairing of transmitters and receivers over scan and IR sync• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery• Rugged metal construction- Shure SLXD5 Single-Channel Portable Digital Wireless Receiver -The SLXD5 Single-Channel Portable Digital Wireless Receiver packs the rich features of an SLXD Digital Wireless Receiver into a slim, portable package. Featuring pristine 24-bit digital audio clarity, efficient long range UHF transmission and easy-to-use setup features, the SLXD5 is at home on top of your camera or in an audio bag. Scan and deploy frequencies to a compatible SLXD wireless transmitter with IR sync, or coordinate and monitor large channel configurations with many sources using Multi-Mic Mode.A full suite of optional rechargeability accessories enables wireless excellence, wherever required, and the bright OLED screen displays battery life in hours and minutes when used with the optional SB903 Rechargeable Lithium-Ion batteries. Includes SLXD5 Portable Receiver, a pair of AA alkaline batteries, a non-conductive cold shoe mount adapter and a zippered carrying pouch.Features:• Powerful, portable digital wireless receiver for on-camera cold shoe mounting and audio bag use• Transparent 24-bit digital audio• Extended 20 Hz to 20 kHz frequency range (microphone dependent)• 118 dB dynamic range• Dual 1/8" outputs including a headphone monitor out and switchable line/mic output• Use Multi-Mic Mode to scan...

- SLXD3 Digital Wireless Plug-On Transmitter -SLXD3 Plug-On Digital Wireless Transmitter converts any XLR source, including dynamic and condenser microphones, for use as an SLX-D wireless transmitter. Featuring a patented locking ring for a secure, wobble-free connection, the SLXD3 sends 24-bit digital audio from any XLR source to an SLXD4 or SLXD5 Digital Wireless receiver via rock-solid RF connection. Use IR Sync to pair transmitters easily and quickly with your choice of SLX-D wireless receiver.A full suite of optional rechargeability accessories enables wireless excellence, wherever required, and the bright OLED screen displays battery life in hours and minutes when used with the optional SB903 Rechargeable Lithium-Ion batteries. Includes SLXD3 plug-on transmitter, a pair of AA alkaline batteries, zippered carrying pouch and a leather protective sleeve with an integrated belt clip.Features:• Convert any XLR source for use within SLX-D wireless systems• Provides +12-48 VDC phantom power for use with condenser microphones• Patented locking mechanism for secure, wobble-free connection• Transparent 24-bit digital audio• Extended 20 Hz to 20 kHz frequency range (microphone dependent)• 118 dB dynamic range• Digital predictive switching diversity• Switchable 1/10/30 mW power levels (region- and band-dependent)• 44 MHz tuning bandwidth (region dependent)• 32 available channels per frequency band (region dependent)Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band• Easy pairing of transmitters and receivers over scan and IR sync• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery• Rugged metal construction- Shure SLXD5 Single-Channel Portable Digital Wireless Receiver -The SLXD5 Single-Channel Portable Digital Wireless Receiver packs the rich features of an SLXD Digital Wireless Receiver into a slim, portable package. Featuring pristine 24-bit digital audio clarity, efficient long range UHF transmission and easy-to-use setup features, the SLXD5 is at home on top of your camera or in an audio bag. Scan and deploy frequencies to a compatible SLXD wireless transmitter with IR sync, or coordinate and monitor large channel configurations with many sources using Multi-Mic Mode.A full suite of optional rechargeability accessories enables wireless excellence, wherever required, and the bright OLED screen displays battery life in hours and minutes when used with the optional SB903 Rechargeable Lithium-Ion batteries. Includes SLXD5 Portable Receiver, a pair of AA alkaline batteries, a non-conductive cold shoe mount adapter and a zippered carrying pouch.Features:• Powerful, portable digital wireless receiver for on-camera cold shoe mounting and audio bag use• Transparent 24-bit digital audio• Extended 20 Hz to 20 kHz frequency range (microphone dependent)• 118 dB dynamic range• Dual 1/8" outputs including a headphone monitor out and switchable line/mic output• Use Multi-Mic Mode to scan...

Mycass rotary heated towel rack with high waterproof rating. Power 87-Watt, voltage 110-Volt adjustable temperature from 30℃ to 70℃. This towel rack comes with an intelligent touch screen that can be heated for 1-9-hours on a scheduled basis. The features of no punching and easy installation make it convenient for us to decorate our bathroom. There is a 1.5-meter-long spring wire, and the towel rack can rotate 180°, allowing you to air your items at any angle. Color: Black. Material: Stainless Steel.

Experience the freedom of wireless performance with the XSW-D Wireless Digital 6.3mm Male Plug-On Instrument Transmitter. Crafted by the renowned audio equipment manufacturer, Sennheiser, this high-quality, durable transmitter is designed for use with any electronic instrument featuring a 6.3mm (1/4") output, including electric guitars and basses. Engineered with innovative 2.4 GHz technology, this portable and reliable transmitter effortlessly pairs with any XSW-D receiver, providing you with a seamless, cable-free audio experience. Whether you're a professional musician on stage or a passionate hobbyist at home, the XSW-D Wireless Digital Transmitter offers you the flexibility and mobility to move around freely during performances, without the constraints of wires or cables.This product comes with a charging cable, ensuring that your transmitter is always ready for your next performance. Please note that other accessories are not included. Experience the superior sound quality and convenience of wireless technology with the XSW-D Wireless Digital 6.3mm Male Plug-On Instrument Transmitter.

You can elevate your audio transmission quality with the XSW-D Wireless Digital XLR Female Plug-On Transmitter, a premium offering from the renowned brand Sennheiser. This durable and high-quality device is engineered to seamlessly integrate with any dynamic microphone featuring a male XLR output, ensuring a reliable and interference-free connection.Crafted with a compact and innovative design, the XSW-D Transmitter operates on the 2.4 GHz frequency range, making it an excellent choice for professionals seeking a wireless solution that maintains audio integrity. Its compatibility with any XSW-D receiver extends its versatility, allowing for a broad range of audio applications.Whether you're capturing live performances, conducting interviews, or facilitating events, this transmitter is designed to deliver crystal-clear sound without the constraints of cables. The plug-on form factor ensures a quick and easy setup, so you can focus on delivering the best audio experience.Included with this transmitter is a charging cable, providing you with the essentials to keep your device powered and ready for action. While a microphone and other accessories are not part of this package, the XSW-D Wireless Digital XLR Female Plug-On Transmitter stands as a reliable replacement or addition to your existing Sennheiser wireless system.Choose the XSW-D Wireless Digital XLR Female Plug-On Transmitter for its blend of Sennheiser's reputable quality and the freedom of wireless operation, ensuring your audio is transmitted with clarity and precision.

Just when you thought audio equalization couldn't get more precise, the Equalize Parametric Equalizer Software Plug-In emerges as a game-changer in the realm of sound engineering. This innovative and advanced tool is not your average equalizer; it's a powerhouse of customization, designed to cater to the most meticulous audio professionals.With the Equalize Parametric Equalizer, you have the unparalleled ability to fine-tune your audio with exceptional control. The plug-in stands out with its capability to adjust not only the center frequency, gain, and bandwidth but also the filter slope for each band. This level of detail is unmatched, offering slopes ranging from a gentle 3 dB to an ultra-sharp 120 dB per octave.The versatility of the Equalize Parametric Equalizer is further enhanced by its operational modes. Choose the zero-latency plug-in option for real-time adjustments in minimum phase mode, or opt for the linear phase mode to maintain perfect phase relationships. But the innovation doesn't stop there; the plug-in boasts a unique mixed phase mode. This feature allows you to dial in the latency from 5 to 120 milliseconds, minimizing pre-ringing artifacts while preserving phase relationships as closely as possible. With latency values below 20 milliseconds, the Equalize Parametric Equalizer ensures that any potential pre-ringing is imperceptible, thanks to the temporal masking of human hearing, all while maintaining time-alignment across the audible frequency range.The user-friendly interface of the Equalize Parametric Equalizer is meticulously crafted for efficiency and ease of use. Adjust band parameters with intuitive handles directly on the graphical frequency response display. Manipulate bandwidths and filter slopes with precision, ensuring your audio is shaped exactly to your liking.A state-of-the-art flexible real-time analyzer is integrated into the Equalize Parametric Equalizer, allowing you to monitor every nuance of the processing. With the ability to switch between full, mid, side, left, or right channel processing for each band, the plug-in ensures optimal routing of the audio signal for the best results and lowest possible latency.Whether you're an audio engineer, producer, or musician, the Equalize Parametric Equalizer Software Plug-In is the professional-grade tool that will elevate your sound to the next level. Its compatibility with both Mac and PC platforms, along with its seamless integration with Adobe Audition, makes it a versatile and indispensable asset in any audio editing suite.

From the innovative minds at Acon Digital comes the Verberate Surround Reverb Software Plug-In, a cutting-edge tool designed to elevate your audio post-production and electronic music creation. This advanced algorithmic reverb plug-in is expertly crafted to simulate real acoustical environments with a fidelity that is virtually indistinguishable from true-to-life sound spaces. Verberate Surround stands out in the realm of digital reverb design, eschewing traditional building blocks for novel methods that meticulously reproduce both the early reflections and the lush, dense reverb tails that are the hallmarks of genuine impulse response measurements in actual acoustical settings. With support for all common surround formats up to 7.1, this high-quality plug-in ensures a fully immersive sonic experience.The software's sophisticated modeling captures the intricate interplay of early reflections between each input and output pair, while the late reverberation component simulates the natural energy fluctuations across both the horizontal and vertical planes of the sound field. This attention to detail provides audio professionals with a user-friendly interface to craft soundscapes that are rich, dimensional, and convincingly real.Understanding reverberation is key to appreciating the prowess of Verberate Surround. Whether indoors or outdoors, sound reflections contribute to the overall auditory perception by arriving at the listener's ear after bouncing off surfaces, creating a composite soundscape. Verberate Surround meticulously simulates this phenomenon, from the clarity of the initial early reflections to the complex, smoothly decaying sound of the late reverberation.As an essential tool for analyzing real room acoustics, Verberate Surround utilizes the concept of impulse response - capturing the reverberation that follows a short, impulsive sound - to ensure that the reverb produced by the plug-in is as close to reality as possible. Choose the Verberate Surround Reverb Software Plug-In for a professional-grade, innovative solution that brings the authentic acoustics of real environments right into your studio. Whether you're working on a film score, a music project, or any other audio production, this plug-in from Adorama, a trusted name in professional audio equipment, will help you achieve the perfect reverberation for your sound.

Experience the power and precision of the DeFilter Automatic Equalization Software Plug-In, an electronic download from Adorama, a trusted name in high-quality electronics and professional gear. This advanced software is designed to rectify tonal imbalances in your audio mixes, effectively reducing resonant peaks or dips in the frequency spectrum. Whether you're dealing with severe issues like comb filter effects or standing waves from untreated rooms, DeFilter is equipped to handle it. This is achieved by the software's ability to analyze the input signal over time, estimating a correction filter that best suits the signal during the analysis period. DeFilter is versatile, capable of matching recordings to target profiles such as music or speech. Alternatively, it can extract the overall timbre from the source, evening out narrow peaks and dips while preserving the tonal character of the input signal. This feature is particularly effective in removing resonances and comb filter effects. The software also allows recordings to be equalized to match a reference recording. You can define frequency-dependent correction levels using custom curves, enabling DeFilter to focus on problematic frequency ranges while leaving other regions untouched. To use DeFilter, simply activate the learn mode in the user interface and play a part of the recording for analysis. Typically, 15 to 30 seconds of audio is sufficient to obtain good results. Once the analysis is complete, disable the learn mode for the correction phase. DeFilter can match the frequency spectrum to predefined profiles or to a measured profile for matched equalization. It can also be set up to remove local peaks and dips in the spectrum while maintaining the overall timbre, making it an effective tool for removing sharp resonances or undesired comb filters. Experience the difference with the DeFilter Automatic Equalization Software Plug-In, your solution for superior audio quality.

Thanks for using Acon Digital Restoration Suite. The restoration suite consists of four audio restoration plug-ins that are the result of several years of research within the field of noise reduction and audio restoration algorithms: • DeNoise is a plug-in designed to reduce stationary noise, such as broadband noise, hiss, wind noise, buzz and camera noise. Great efforts have been put into preserving as much of the original signal as possible during the noise reduction process. As a result, DeNoise can reduce or in many cases completely remove the noise in a very transparent manner without loss of transients, attacks or "air" in the recording • DeHum targets hum and buzz typically introduced by poorly grounded electrical equipment, but also other tonal noise sources like electrical motor noise • DeClick is designed to remove impulsive noise such as clicks and crackle. These distortions are frequently encountered on LP and 78 RPM records, but also occur in digital recordings due to drop-outs or distorted data packets. The latest version of DeClick introduces a dethump algorithm, which allows you to reduce plosives and thump sounds, as often found in recordings from scratched vinyl records or in vocal recordings • DeClip restores audio recordings distorted by analog or digital clipping

Experience the power of professional audio mastering with the Acon Digital Mastering Suite. This advanced suite comprises five high-quality plug-ins, designed for ultimate signal transparency and optimal audio enhancement. The suite is available in both 32 and 64-bit versions, compatible with VST, VST3, AAX for Windows and OS X, and AU plug-ins for OS X. This ensures seamless integration with your existing music production software, whether you're using a PC or a Mac.The Dynamics plug-in is a versatile tool, functioning as a compressor, expander, or gate. Its intelligent look-ahead algorithm, adjustable from 0 to 30 milliseconds, ensures a band-limited gain signal, reducing potential distortion to a minimum. With up to 4 times oversampling, distortion is further reduced, and the side chain signal can be either internal or external. Multiband Dynamics, the multiband extension of Dynamics, allows for dynamic processing in up to four separate bands. You can freely set the cross-over frequencies and filter slopes, operating in linear phase mode to avoid phase issues between the processed bands.Limit is a transparent limiter with intelligent look-ahead that reduces distortion to a minimum. The two-step process of limiting includes a pre-compressor followed by the actual peak limiting algorithm. Equalize is a parametric equalizer that stands out from the rest. You can freely adjust not only center frequency, gain, and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per octave. Dither is a dithering plug-in with flexible perceptual noise shaping. You can adjust the maximum gain and the filter length of the frequency response of the noise shaping filter is visualized graphically.The Acon Digital Mastering Suite supports sampling rates up to 96 kHz and multi-channel audio up to 7.1 surround. With its user-friendly interface and graphical visualizations of all aspects of the processing, this suite is a must-have tool for any professional audio production setup.

With the innovative DeVerberate 2 Reverb Reduction Plug-in, you can now gain precise control over the reverberation in your recorded material. This advanced plug-in is designed to attenuate or enhance the existing reverberation, making it a versatile tool for audio editing. It utilizes a groundbreaking real-time algorithm that performs equally well on both mono and stereo recordings. The DeVerberate 2 plug-in separates the incoming audio into an estimation of the direct sound and the reverberated sound, allowing you to recombine them freely. This gives you the power to alter the perceived distance in a mix by adjusting the balance between the direct sound and the reverberation. This plug-in features an improved automatic reverb time estimation and supports VST3, making it a robust tool for sound engineers. The DeVerberate 2 also introduces a unique Early Reflections Filter that works in tandem with the late reverb suppression found in the previous version. This filter employs advanced statistical methods to estimate the impulse response of the early reflections, which is then used to calculate an inverse filter that negates the effect of the early reflections.The DeVerberate 2 Reverb Reduction Plug-in is compatible with both Windows (PC) and OS X (Macintosh), with both 32 and 64 bit versions available. It supports plug-in formats VST, VST3, AAX and Audio Units (OS X only), and can handle sampling rates up to 96 kHz. This plug-in offers separate adjustments of the direct sound and the reverberation levels, manual adjustment of the decay time of the original reverberation, and an early reflections filter. It also provides a frequency spectrum representation of the input signal, output signal, and estimated reverberation. Additional features include a frequency emphasis filter for the reduction level, high and low shelving filters with variable slopes, high and low peak filters with adjustable bandwidth, and a graphical representation of frequency response. You can also edit filter settings through handles in the frequency response curve. The DeVerberate 2 Reverb Reduction Plug-in also supports EUCON and full Pro Tools HW controller, making it a comprehensive solution for your audio editing needs.

Experience the innovative power of the MMultiBandDistortion Digital Distortion Software Plug-In, an electronic download that revolutionizes music production. This advanced plug-in combines the best of both analogue and digital worlds, offering a unique distortion effect that is perfect for enhancing guitars, keyboards, drums, or for creative sound mangling. With a high rating of 5 out of 5 stars, this professional-grade software is designed for musicians, producers, and audio engineers seeking to add a distinctive touch to their music. It features a generalized amp simulator, capable of emulating a wide range of amps, and a digital distortion processor with 6 purely digital distortion algorithms. This combination provides a powerful tool for creating a variety of distortion effects, from overdrive to fuzz and beyond. The MMultiBandDistortion plug-in offers a high level of customization, with 12 predefined sounds organized by styles, including metal and rock. Each sound can be further tailored using an exhaustive set of controls and an equalizer, allowing for a truly personalized music production experience. This software also boasts 4 versatile modulators, each capable of working as an LFO, audio level follower, enveloper, randomizer, and even pitch detector. This feature adds dynamic movement to your music, making it less static and more engaging. The MMultiBandDistortion plug-in is equipped with the most advanced GUI engine on the market, offering a stylable, resizable, and GPU-accelerated interface. Whether you prefer a vintage gear look for old-school rock music or a futuristic device for modern electronic music, this plug-in can adapt to your aesthetic preferences. In addition to its powerful features, the MMultiBandDistortion plug-in also offers a dual user interface. The Easy screen is perfect for beginners, offering several predefined modes and a few controls for quick and easy use. For more experienced users, the Edit screen reveals the full range of amazing features under the hood. The MMultiBandDistortion plug-in supports VST, VST3, AU, and AAX interfaces on Windows & Mac, both 32-bit and 64-bit. With free-for-life updates and a community of users sharing presets and ideas, this software is a valuable addition to any music production setup. Experience the creative possibilities of the MMultiBandDistortion Digital Distortion Software Plug-In today.

Where audio clarity is paramount, the DeVerberate Reverb Reduction Software Plug-In from Adorama stands as an innovative solution. This advanced and powerful tool is designed to efficiently reduce reverb in audio recordings, enhancing the quality of your sound. Developed by Acon Digital, the DeVerberate plug-in is equipped with a unique real-time algorithm that operates independently of stereo or multi-channel audio. It intelligently splits the incoming audio into an estimation of the direct sound and the reverberated sound, allowing for a high degree of control over your audio output. This user-friendly software offers independent manipulation of the direct and reverberated signal levels in existing audio recordings. Utilizing advanced algorithms, it separates the direct and reflected signals, regardless of the number of audio channels recorded. This feature enables you to independently adjust the output levels of these two signal components, giving you the power to attenuate or emphasize the reverberated signal as needed.To separate the direct from the reverberated signal, the DeVerberate plug-in requires an estimate of the reverberation time and the reverberation level in the source recording. This ensures a more accurate and effective reduction of reverb, resulting in cleaner, clearer audio.Choose the DeVerberate Reverb Reduction Software Plug-In for a specialized, reliable solution to common audio challenges. Trust in the quality and reliability of Adorama, a reputable brand known for its high-quality photography and audio equipment.

Experience unparalleled comfort with GOOD HOUSEKEEPING's 750W Wall Mount Space Heater with Remote Control. Designed for efficiency and style, this compact heater is the perfect addition to home offices and small spaces. Take command of your comfort with its digital display, adjustable thermostat, and 2 heat settings from the comfort of your couch using the remote control. Keep peace of mind with its safety overheat protection, power safety button, and cool touch housing. Whether you're working in the office or relaxing in a snug space, the GOOD HOUSEKEEPING 750W Wall Mount Space Heater has you covered. Color: Black.

MYCASS rotary heated towel rack with high waterproof rating. Power 87-Watt, voltage 110-Volt, adjustable temperature from 30℃ to 70℃. This towel rack comes with an intelligent touch screen that can be heated for 1-9 hours on a scheduled basis. The features of no punching and easy installation make it convenient for us to decorate our bathroom. There is a 1.5 meter long spring wire and the towel rack can rotate 180 degrees, allowing you to air your items at any angle. Color: White. Material: Stainless Steel.

Take your audio performance to the next level with the SLXD15 Portable Digital Wireless Bodypack System with SLXD3 Plug-On Transmitter, operating in the G58: 470-514MHz frequency range. This advanced system combines the SLXD1 Digital Wireless Bodypack Transmitter and the SLXD5 Single-Channel Portable Digital Wireless Receiver, both renowned for their transparent, 24-bit digital audio and robust RF performance.The SLXD1 Transmitter delivers industry-leading digital wireless technology and design, ensuring easy synchronization with a wireless receiver. With TQG connectivity, it offers a variety of microphone options, making it a versatile solution for a wide range of applications, from day-long conferences to nighttime performances. It boasts an extended 20 Hz to 20 kHz frequency range (microphone dependent), a 118 dB dynamic range, and digital predictive switching diversity. With a 44 MHz tuning bandwidth and up to 32 available channels per frequency band (region dependent), it can support up to 10 compatible systems per 6MHz TV band and 12 systems per 8 MHz band. The transmitter's ergonomic, durable plastic construction ensures longevity.The SLXD5 Receiver, on the other hand, is a powerful, portable digital wireless receiver designed for on-camera cold shoe mounting and audio bag use. It offers pristine 24-bit digital audio clarity and efficient long-range UHF transmission. Its easy-to-use setup features include scan and deploy frequencies to a compatible SLXD wireless transmitter with IR sync, and the ability to coordinate and monitor large channel configurations with many sources using Multi-Mic Mode. The receiver's bright OLED screen displays key system function readouts and remaining battery life when used with the optional SB903 Rechargeable Lithium-Ion batteries. Its rugged metal construction ensures durability under demanding conditions.In summary, the SLXD15 Portable Digital Wireless Bodypack System with SLXD3 Plug-On Transmitter, G58: 470-514MHz, offers a comprehensive solution for superior audio performance in a variety of settings. Whether you're hosting a conference or performing on stage, this system delivers clear, reliable audio every time.

Make your musical performances seamless and hassle-free with the XSW-D Wireless Digital 6.3mm Male Plug-On Instrument Receiver. This innovative and high-quality device, designed by the reputable brand Sennheiser, is engineered to provide superior audio transmission for a variety of musical instruments, including electric guitars, basses, and keyboards.This durable and portable receiver operates within a frequency range of 2400-2483.5 MHz, ensuring a clear and uninterrupted signal even in the most demanding performance environments. Its wireless functionality offers you the flexibility and freedom to move around without the constraints of cables or wires, making it an ideal choice for musicians who value mobility on stage.The XSW-D Wireless Digital Receiver comes with a 6.3mm (1/4") male plug-on connector, making it compatible with any guitar amp, mixer, or recording device with a 6.3mm (1/4") input. It is designed to pair effortlessly with any XSW-D transmitter, ensuring a smooth and user-friendly experience.This receiver is powered by a 9V battery or an optional AC adapter, offering you the convenience of choosing the power source that best suits your needs. Although this product is offered as a replacement, it includes a charging cable for your convenience, ensuring that your receiver is always ready for your next performance.Experience the difference of wireless freedom and high-quality audio transmission with the XSW-D Wireless Digital 6.3mm Male Plug-On Instrument Receiver.

MYCASS rotary heated towel rack with high waterproof rating. Power 87W, voltage 110V, adjustable temperature from 30 ℃ to 70 ℃. This towel rack comes with an intelligent touch screen that can be heated for 1-9 hours on a scheduled basis. The features of no punching and easy installation make it convenient for us to decorate our bathroom. There is a 1.5 meter long spring wire and the towel rack can rotate 180 degrees, allowing you to air your items at any angle. Color: Grey. Material: Stainless Steel.

Mycass 180° rotatable heating towel warmer, made of 304-stainless steel and SPCC low-carbon steel, has a very long service life. Equipped with an intelligent touchable display screen, it can control the temperature range of 30℃ -70℃ and has a timing function that can be timed for 1-9-hours. It can be heated for sterilization, making your clothes and towels cleaner and healthier, giving you a better life. Carbon brazing for dry heating, making the heating more uniform and drying faster. Equipped with a 1.5 m long spring charging cable, your placement is not limited by the socket. Color: Black.

MYCASS 180 ° rotatable heating TOWEL Warmer, made of 304 stainless steel and SPCC low-carbon steel, has a very long service life. Equipped with an intelligent touchable display screen, it can control the temperature range of 30 ℃ -70 ℃ and has a timing function that can be timed for 1-9 hours. It can be heated for sterilization, making your clothes and towels cleaner and healthier, giving you a better life. Carbon brazing for dry heating, making the heating more uniform and drying faster. Equipped with a 1.5m long spring charging cable, your placement is not limited by the socket. Color: Grey.