10 products were found matching your search for Proxxon in 1 shops:

Each driver has a fixed place in the practical holder. May be used as desktop stand or attached to wall. Shafts of high alloy Nickel-Chrome-Molybdenum (SAE 8660) for maximum hardness and toughness. Chromed with brinelled tip. The ergonomically formed plastic handles are oil and impact resistant. The revolving top and finger mold improve ease of use.

Usable for extended periods when grinding, polishing, cleaning, cutting and engraving. Ideal for mechanics, model builders, jewelers, opticians, artists and electronic enthusiasts. This high-revving motor has full-wave electronic speed control capable of producing variable speeds between 5,000 and 20,000 rpm and is usable for extended periods at a time producing an exceptional power/weight ratio. The streamlined die-cast aluminum head provides a stable housing for the ground steel spindle. It runs in a ball bearing assembly, minimizing play (max. runout 0.001). The tool comes with six high concentricity collets sized 1/32 in., 1/16 in., 5/64 in., 3/32 in., 7/64 in. and 1/8 in. (1.0, 1.5, 2.0, 2.4, 3 and 3.2 mm) along with a collet nut as well as a selection of 34 industrial quality bits and cutters with shanks 3/32 in. (2.3 mm).

Ideal for architects, designers, decorators, artists and teachers. For building architectural models, prototypes as well as classic model railroad, plane and boat items. The large table with (15) 11/32 in. x 11 in. (390 x 280 mm) ensures smooth and easy movement of the work piece. The printed grid and protractor assist with division and cutting. The solid aluminum overarm has a 13 3/4 in. (350 mm) throat and offers 5 1/2 in. (140 mm) in height. The holder and wire coil (one spool of wire 98 ft., 0.008 in. Dia is included) may be shifted and adjusted along the overarm to enable miter cutting. An LED indicates operation and thus reminds you not to touch the hot wire to prevent burnt fingers (the wire heats to maximum in less than 1 second). Technical data: Cutting wire temperature 210-390F (100-200C) 10-Volt At 1 A, 110-120-Volt AC, 60 Hz. Weight 6.6 lbs.

Proxxon Thermo Cut 12/E Hot Wire Cutter for free modeling in Styrofoam. No crumbling as when working with knife and sandpaper. Proxxon cutting wire 11.4 in. x 20-Gauge or 285 x 0.85 mm. Can be formed by hand or with pliers to cut any shape profile. Hand held hot wire cutter features top pivotal fixture to firmly hold wire at the desired angle. Bottom extendable wire fixture holds bottom end of wire to a maximum extension of 7.9 in. or 200 mm. Has variable cutting temperature feature that is adjustable by a turn of the knob. Trigger finger on/off switch for safety and convenience. Practical applications include freehand cutting for creating landscapes for railroading, architecture modeling, and prototype construction for designers, decorators or for fine work on construction insulation. Temperature range is 300°-660°F. Tool requires a 38706 12-Volt transformer NG 2/S (sold separately).

Rotates in all directions. Easily clamps to workbenches and tables of up to 2 3/8 in. (60 mm). Alternatively, use 2 standard screws to secure to the work surface. The 4/5 in. (20 mm) bore accepts all MICROMOT drills and grinders, e.g. FBS 115/E, IB/E, MICROMOT 50, 50/E and 50/EF, FBS 12/EF.

Very compact design. Noryl casing (heat resistant - a necessity for transformer enclosures). Capacity 2 Amp at 16-Volt open circuit - and 12-Volt under load = 24VA (DC). Primary supply 110 - 120-Volt. Polarized socket for Micromot plug. Red LED indicates readiness for use. PTC (Positive temperature coefficient) element prevents overload, plugged in tool will not automatically restart. After cooling down, the AC wall plug should be disconnected briefly to reset the adapter. Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the Micromot tool ready for use. Tool and accessories not included. Material: Plastic.

The machine is a specialist to cut the smallest pieces, whenever working with a regular circular saw is impossible and too dangerous. The high-performance 110 - 120-Volt motor is very quiet and has a prolonged life expectancy. Cutting depths: in wood up to 5/16 in. (8 mm), in plastic (also circuit boards) up to approx. 1/8 in. (3 mm), in non-ferrous metals up to 1/16 in. (1.5 mm). Even fiberglass reinforced plastics can be cut with the carbide tipped saw blade (available as accessory). The machined and perfectly plane aluminum worktable in size 6 1/4 in. x 6 1/4 in. (160 x 160 mm) allows for sliding the work piece easily. The housing is made of sturdy plastic (ABS) with a side door to conveniently remove saw dust. With the included Super Cut Saw Blade 2 9/32 in. (58 mm) it is possible to cut soft wood up to 5/16 in. (8 mm). Other saw blades, available as accessories in our program, with 2 in. (50 mm), still ensure up to 15/64 in. (6 mm) cutting depth. Overall size approx. 10 1/4 in. x 7 5/8 in. x 3 11/64 in. (265 x 195 x 85 mm). Weight approx. 4 lb. (1.8 kg).

This superfine sander with linear sanding motion (versus rotary or orbital) operates at 8,000 strokes per minute with a 3/32 in. (2.5 mm) stroke. It is ideal for surfaces, slots and tight corners. Included are four sanding attachments with straight shanks and 4 with angled shanks (four different shapes per shank style) as well as 3 sheets of pre-profiled adhesive sanding pads. The sheets are 180, 240 and 400-grit, with 5 of each shape per sheet. An AC adapter of at least 12-Volt - 18-Volt DC and 1 Amp is required (sold seperately). We recommend Proxxon power supplies NG 2/S or NG 5/E. The electronic speed control on the NG 5/E unit allows the selection of different speeds for different applications and materials.

The Proxxon Power Carver is suitable for carving of all types of wood. Can be used for carving and the restoration of furniture. This carver is ideal for taking the work out of your carving projects.

Proxxon's Chop and Miter Saw is ideal for small precise mitered cuts. Instead of a swiveling saw head, the table rotates the work piece within a clamping jawed vise. Base includes a round table of pressure-cast aluminum and CNC-machined guides and fittings.