64 products were found matching your search for Reassemble in 7 shops:

Following the record-shattering successes of Marvel's The Avengers in 2012, The Avengers must reassemble on the big screen to combat the robotic menace of Ultron! Marvel's Avengers: Age of Ultron is set for US release on May 1, 2015. Acclaimed writer/director Joss Whedon and producer Kevin Feige return, along with the all-star cast of Robert Downey Jr. (Tony Stark/Iron Man), Chris Hemsworth (Thor), Mark Ruffalo (Bruce Banner/Hulk), Chris Evans (Steve Rogers/Captain America), Scarlett Johansson (Natasha Romanoff/Black Widow) and Jeremy Renner (Clint Barton/Hawkeye). They are joined by Emmy Award- winner James Spader (Lincoln, The Blacklist) as Ultron. Passport to Reading Level 2© 2015 Marvel. All Rights Reserved.

This tongue and groove set will cut joints for stock up to 3/4 in. thick with the groove measuring 1/4 in. thick x 1/2 in. D. This set contains 2 bits 1 for the tongue and 1 for the groove so there is no need to reassemble the bits for the tongue or groove cut. This set features triple wing cutters, an adjustable tongue cutter bit for setting the joints tightness and 1/2 in. shanks. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.

This tongue and groove set will cut joints for stock up to 13/16 in. thick with the groove measuring 1/4 in. thick by 1/4 in. D. This set contains 2 bits - 1 for the tongue and 1 for the groove - so there is no need to reassemble the bits for the tongue or groove cut. This set is non adjustable and geared toward lighter Routing. 1/4 in. shanks. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.

This tongue and groove set will cut joints for stock up to 1-1/2 in. T with the groove measuring 1/2 in. T by 1/2 in. D. This set contains 2 bits - 1 for the tongue and 1 for the groove - so there is no need to reassemble the bits for the tongue or groove cut. This set features triple wing cutters, an adjustable tongue cutter bit for setting the joints tightness and 1/2 in. shanks. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Align the bearing with your fence using a straight edge. Make multiple passes increasing the cutting depth by 1/8 in. for each pass until you achieve full depth. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. These high quality router bits will serve you well for many projects. For best results, use with solid wood only.

This tongue and groove set will cut joints for stock up to 3/4 in. thick with the groove measuring 1/4 in. thick by 1/4 in. D. This set contains 2- bits - 1 for the tongue and 1 for the groove - so there is no need to reassemble the bits for the tongue or groove cut. This set features triple wing cutters, an adjustable tongue cutter bit for setting the joints tightness and 1/4 in. shanks. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.

This tongue and groove set will cut joints for stock up to 1-1/4 in. thick with the groove measuring 1/4 in. thick x 1/2 in. D. This set contains 2 bits 1 for the tongue and 1 for the groove so there is no need to reassemble the bits for the tongue or groove cut. This set features triple wing cutters, an adjustable tongue cutter bit for setting the joints tightness and 1/2 in. shanks. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.

The EB-45 Series is a half-cartridge based pressure reducing and regulating valve with a bronze body. The valve reassembles the traditional regulators with a spring chamber and an adjusting screw but offers the performance of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIB and Union. Intended for use where supply line pressure does not exceed 400 psi and is suited for cold or hot water service.

The Prova railing system is a component based, easy to install, interior and exterior railing system. The system offers up to 18 different configurations. The cable adjustment terminal is installed at each end of a cable run. Separate the 2 sections, slide ball joint end through post fitting, then reassemble terminal, keeping approximately 1/2 in. of thread exposed for tightening of cables. Carefully thread cable into each end of terminal while cable is slack. Tighten each fitting until cables are taught. This is for use with the 42 in. high post system. Color: Stainless Steel.

The Dahle 40334 High Security Shredder is NSA approved for NSA/CSS Specification 02-01 capable of reducing a sheet of paper into over 15,500 tiny particles. These particles are so small that they have been rendered impossible to reassemble. This 40334 machine is designed for military, federal, state or local governments as well as Department of Defense contractors engaged in projects where National Security is an issue. Dahle 40334 is built with a 10-1/4" feed opening to accommodate both letter and legal size paper with ease.It uses the latest technology to offer full electronic capabilities including such safety features as Automatic Shut-Off when the cabinet door opens and Auto Reverse to prevent an overfeed. Automatic On/Off and Bag Full Auto Off are features that offer both convenience and satisfaction in knowing you will be notified when it's time to change the bag. Equipped with a built-in EvenFlow Lubricator automatic oiling system, this system provides slow, continuous lubrication across the entire cutting mechanism and ensures peak shredder performance. The revolutionary SmartPower Energy Management System helps to reduces power consumption after 10 minutes of sitting idle (sleep mode) and completely powers down after an additional 20 minutes of inactivity.

Rotary floor display rack offers a welded open wire construction with a powder-coat finish that keeps material fresh, clean and easy to see. Disassembles and reassembles quickly. Ideal for trade shows. Full-view front displays literature, magazines or

A storyteller, Marine Serre disassembles and reassembles popular material to create one-of-a-kind regenerated pieces, each revealing new unique stories. With a stretch-design and jersey texture, this tee is defined by a patchwork, panelled design. With signature moon prints and graphic panels, this piece is sure to turn heads. 88% Polyamide, 12% Elastane, Crewneck, Ribbed Trims, Printed Branding, Marine Serre. Marine Serre Women's Regenerated Graphic T-Shirt in Red, Size Small

Rotary floor display rack offers a welded open wire construction with a powder-coat finish that keeps material fresh, clean and easy to see. Disassembles and reassembles quickly. Ideal for trade shows. Full-view front displays literature, magazines or forms for fast selection. Display rack includes 16 open-wire, letter-size compartments that are 1" deep. Each layer rotates independently for easy literature selection. Display rack rolls easily on five dual-wheel casters (two locking).

A storyteller, Marine Serre disassembles and reassembles popular material to create one-of-a-kind regenerated pieces, each revealing new unique stories. With a stretch-design and jersey texture, this tee is defined by a patchwork, panelled design. With signature moon prints and graphic panels, this piece is sure to turn heads. 88% Polyamide, 12% Elastane, Crewneck, Ribbed Trims, Printed Branding, Marine Serre. Marine Serre Women's Regenerated Graphic T-Shirt in Red, Size Medium

A storyteller, Marine Serre disassembles and reassembles popular material to create one-of-a-kind regenerated pieces, each revealing new unique stories. With a stretch-design and jersey texture, this tee is defined by a patchwork, panelled design. With signature moon prints and graphic panels, this piece is sure to turn heads. 88% Polyamide, 12% Elastane, Crewneck, Ribbed Trims, Printed Branding, Marine Serre. Marine Serre Women's Regenerated Graphic T-Shirt in Red, Size Large

A storyteller, Marine Serre disassembles and reassembles popular material to create one-of-a-kind regenerated pieces, each revealing new unique stories. With a stretch-design and jersey texture, this tee is defined by a patchwork, panelled design. With signature moon prints and graphic panels, this piece is sure to turn heads. 88% Polyamide, 12% Elastane, Crewneck, Ribbed Trims, Printed Branding, Marine Serre. Marine Serre Women's Regenerated Graphic T-Shirt in Red, Size X-Small

Easy Installation-- With no tools required, no need to reassemble at all, open the package and use it on Mic Stand as you wish. Antiskid design to ...

Easy Installation With no tools required, no need to reassemble at all, open the package and use it on Mic Stand as you wish. Antiskid design to p...

The utility cart is a collapsible and install-free storage bin. It allows to fold flat when not use and you don't need to keep instructions to remember how to assemble and reassemble or use tools to operate it when you want to use it. The rolling cart is versatile and can be used in many ways. Size: large. Color: Light Gray.

You need a bicycle repair stand that will make it easier to change tires, lubricate chains, adjust the drivetrain and reassemble the bike. This repair stand needs to be beautiful, lightweight, foldable, portable and a great value. This repair rack is the one you've been waiting for. Gender: male. Age Group: adult.

The Winco C-1080 is an 8 quart full size Bellaire chafer. The collapsible stand conveniently folds down and reassembles in seconds, great for space saving storage, and especially convenient for transporting food to events. This chafer set includes water pan, food pan, frame, cover and two fuel holders. Constructed from stainless steel with built-in clips to hold covers in place for easy and convenient refilling and serving.