21040 products were found matching your search for Robens Sprinter 2 dark in 4 shops:

After extensive research and development, the 3716 CX2 75 Sprinter II 2 Stage Carbon Fiber System emerges as a top-tier solution for creative professionals. This system seamlessly integrates the 1620G 75 Sprinter II tripod with the CX2 fluid head, ensuring swift and effortless setups. The CX2 Fluid Head, a key component of this system, is an exceptional ball levelling fluid head designed for dynamic professionals seeking a versatile, affordable solution without compromising on performance. It's capable of balancing payloads from 0 - 17.64 lbs, making it suitable for use with a wide range of devices, from mirrorless cameras and DSLRs to mid-sized cine-rigs and ENG cameras. The CX2 employs advanced CB Plus technology, offering 16 positions of counterbalance. Coupled with Miller's unrivalled fluid drag system, which provides 3+0 settings and 60mm of camera plate travel, this technology allows for optimal camera control. Crafted from lightweight, high-strength die-cast alloy and tough composite polymers, the CX2 Fluid Head guarantees robust engineering and smooth pan and tilt camera movements, even in extreme conditions.The 75 Sprinter II Carbon Fiber Tripod, paired with a ground-level spreader, is another integral part of this system. The patented Miller design allows for independent leg stage adjustments via two high-located leg locks, eliminating the need for operators to bend down. The unique intertwined layered construction of carbon/basalt fiber gives the tripod tubes incredible stiffness, resulting in a highly rigid tripod at any height.The system also includes the Arrowx Softcase, designed for 2 stage tripods. This softcase, made from weatherproof ballistic nylon, features padded carry straps and a head-end cradle for fluid head protection during transport. The softcase also includes backpack straps, which can be stored within an external pocket when not in use. The 3716 CX2 75 Sprinter II 2 Stage Carbon Fiber System is a testament to Miller's commitment to reliability and "THE RIGHT FEEL", making it an excellent choice for applications such as news gathering, documentary, wildlife, and filmmaking.

The 3035 Alloy Sprinter II, 1-stage, Arrowx 3 system, fitted with mid-level spreader is designed for speed of setup, high level of stability and flexibility of payloads, The mid-level spreader makes this system suitable for all terrains.Featuring a wide payload range, precision fluid drag and Miller's innovative 16 position CB Plus counterbalance system, Arrowx 3 delivers the flexibility, speed of set up and accuracy of shot, professionals expect and demand.1-19kg (2.2-41.8lbs) payload range and 5 + 0 selectable pan-tilt fluid drag positions make Arrowx 3 ideal for news gathering and documentaries, enabling it to be used with a wide range of cameras, lenses and accessories.The Arrowx 3 is matched with the 1 stage Sprinter II (alloy) tripod and mid-level spreader to give incredible speed of set up, hugely variable tripod footprint and the versatility to set up on all terrain. Gone are the days where you have to carry two tripods to use large and small cameras on the same shoot.Sprinter II 1 Stage TripodThe 1589 Sprinter II 1-stage, alloy, above ground spreader tripod employs the patented Miller design that enables leg adjustment via a leg lock conveniently located high above the ground thus eliminating the need for the operator to bend down.The Sprinter II dual action leg lock system is designed for operators who require speed and convenience of setup without compromise. By placing independent leg lock levers adjacent to each other, both the upper and lower stages they can be operated in unison or independently from one single upper leg location.The black anodised leg assemblies are integrated with the precision-machined 100mm die-cast alloy bowl resulting in a highly rigid tripod no matter what height you choose.Mid-level SpreaderThe 993 mid-level spreader design offers continuous variable adjustment between maximum and minimum tripod height settings. It enables rapid setup and pull down by keeping the tripod legs at an equal or pre-set distance relative to each other.Rubber Feet set of 3Pullover rubber stirrup feet to suit Sprinter and HD tripods. Constructed from composite polymers and fitted with tough, durable rubber soles for extra grip and durabilityPan Handle Telescopic With ClampTelescopic pan handle, extendable by 200mm (5"), to suit Compass 25, Arrowx 3, 5 and 7.Arrow Softcase 1 StageThe Arrow and Arrowx Softcase for 1- stage tripods comes with padded carry straps and a head-end cradle to protect the fluid head during transport. The softcase is made from weatherproof cordura and uses heavy-duty zippers on bag and all pockets. Weighing only 3.5kg (7.7 lbs) and a transport length of 1080mm (42.5") this softcase is great protection for your tripod system.

It's time to elevate your photography and videography with the Arrowx 1 Sprinter II 2-Section Aluminum Tripod with Fluid Head and Mid-Level Spreader. This sturdy and durable tripod is crafted from high-quality aluminum, ensuring a reliable and long-lasting performance. Its lightweight design allows for easy transportation, making it an ideal companion for on-the-go professionals.The Arrowx 1 Sprinter II is more than just a tripod; it's a versatile tool designed to enhance your shooting experience. The mid-level spreader offers a wider range of camera and lens combinations, making it suitable for a variety of shooting scenarios. Whether you're capturing the beauty of nature or filming a high-paced action scene, this tripod can handle it all.The fluid head of the Arrowx 1 Sprinter II is specifically designed for use with cameras and lenses used in video production. It offers precision fluid drag and Miller's innovative 16 position CB Plus counterbalance system, delivering the flexibility, speed of set up, and accuracy of shot that professionals expect and demand. With a payload range of 0-16.0kg (0-35.3lbs) and 5 + 0 selectable pan-tilt fluid drag positions, this tripod is ideal for news gathering, documentaries, and more.The Arrowx 1 Sprinter II is paired with a 1-stage Sprinter II (alloy) tripod and mid-level spreader, offering incredible speed of set up, a hugely variable tripod footprint, and the versatility to set up on all terrains. The patented Miller design allows for leg adjustment via a leg lock conveniently located high above the ground, eliminating the need for bending down. This design, coupled with the black anodized leg assemblies integrated with the precision-machined 100mm die-cast alloy bowl, results in a highly rigid tripod no matter what height you choose.In summary, the Arrowx 1 Sprinter II 2-Section Aluminum Tripod with Fluid Head and Mid-Level Spreader is a professional-grade tool that offers the perfect blend of durability, versatility, and convenience. It's not just a tripod, it's a game-changer in the world of photography and videography.

You can elevate your filming experience with the Arrowx 3 Fluid Head paired with the robust Sprinter II 2-Section Aluminum Alloy Tripod and the versatile 470 Ground Spreader. This professional-grade system is engineered for rapid deployment, offering exceptional stability and adaptability across a variety of payloads, making it an ideal choice for level terrain applications.The Arrowx 3 Fluid Head showcases a broad payload capacity ranging from 1-19kg (2.2-41.8lbs), accommodating a diverse array of cameras, lenses, and accessories. This versatility is essential for professionals engaged in news gathering, documentary filmmaking, and other dynamic shooting environments. With its precision fluid drag system and Miller's pioneering 16 position CB Plus counterbalance system, the Arrowx 3 ensures smooth, accurate shots and unmatched control, allowing you to capture your vision with precision.The system's compatibility with a wide range of equipment means that you no longer need to carry multiple tripods for different camera setups, streamlining your gear and your workflow. The Sprinter II 1-Stage Tripod, constructed from durable 3034 Alloy, features a ground spreader that simplifies setup. The patented Miller leg lock design, positioned for easy access, allows for quick height adjustments without the need to stoop, saving time and effort on location.The tripod's dual-action leg lock system is crafted for operators who prioritize speed and convenience without sacrificing stability. Independent leg lock levers are situated adjacent to one another, enabling simultaneous or separate adjustments from a single upper leg location. The black anodized leg assemblies, coupled with the precision-machined 100mm die-cast alloy bowl, ensure a rigid support at any height.The 470 Ground Spreader is designed for efficiency, featuring flexible, adjustable arms and pullover rubber stirrups for swift setup and breakdown. This ground spreader is optimized for flat surfaces, maintaining consistent leg spacing for reliable support. It attaches directly to the spiked feet of the Sprinter II tripods, enhancing stability on even and semi-even ground.For added convenience, the system includes a telescopic pan handle with a clamp, extendable by 200mm (5"), compatible with Compass 25, Arrowx 3, 5, and 7 heads, providing additional reach and control during pans and tilts.Transporting your tripod system is made effortless with the Arrow Softcase 1 Stage, crafted from weatherproof cordura with heavy-duty zippers. The case features padded carry straps and a head-end cradle to safeguard the fluid head during transit. Lightweight at just 3.5kg (7.7 lbs) and with a compact transport length of 1080mm (42.5"), this softcase offers excellent protection for your equipment on the go.In summary, the Arrowx 3 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and 470 Ground Spreader is a comprehensive solution that delivers speed, stability, and adaptability for professional...

The 3715 CX2 75 Sprinter II 2 Stage (carbon fiber) system combines the 1620 75 Sprinter II tripod and CX2 fluid head for fast and easy set-ups. Designed for the creative professionals needing a stable, higher capacity solution, it is capable of balancing from a broadcast down to a DSLR camera, thanks to CB Plus technology and Millers precision fluid drag system.The CX2 employs CB Plus technology providing 16 positions of counterbalance, 3+0 settings of Miller's fluid pan and tilt drag with 60mm of camera plate travel, enabling you to match your camera configuration to any shot.The CX2 is matched with the 2-stage 75 Sprinter II (carbon fiber) tripod and mid-level spreader providing speed of set-up and incredible height range all in a light weight carbon fiber system.- CX2 Fluid Head -Compass X2 is an exceptional ball levelling fluid head designed for "on the go " creative professionals needing a versatile and affordable solution with uncompromised performance. Whether you shoot with a mirrorless camera, DSLR, mid-sized cine-rig or an ENG camera, CX2 is capable of balancing payloads from 0 - 17.64 lbs. It features advanced precision fluid drag, intuitive controls and fast set-up. The CX2 employs CB Plus technology providing 16 positions of counterbalance and, with 3+0 settings of Miller's unrivalled fluid drag coupled with 60mm of camera plate travel, you can easily select the perfect set-up to match your configuration for ultimate camera control.Constructed of lightweight high-strength die-cast alloy and tough composite polymers and featuring precision ball bearings Miller have combined robust engineering with silk smooth pan and tilt camera movements. Built for extreme conditions the CX2 performs consistently over a wide range of temperatures and environments giving you confidence when out on a shoot. Versatile and light weight, CX2 makes a great choice for applications such as news gathering, documentary, wildlife and filmmaking. The CX2 meets the demands for reliability and "THE RIGHT FEEL" that are hallmarks of Miller, enabling you to tell your story.- 75 Sprinter II Carbon Fiber Tripod with Mid-Level Spreader -The 1620 75 Sprinter II 2-stage, carbon fiber, mid level spreader tripod employs the patented Miller design that enables the leg stages to be adjusted independently via two leg locks conveniently located high above the ground thus eliminating the need for the operator to bend down.The 75 Sprinter II dual action leg lock system is designed for operators who require speed and convenience of setup without compromise. By placing independent leg lock levers adjacent to each other, both the upper and lower stages they can be operated in unison or independently from one single upper leg location.The unique intertwined layered construction method of the carbon/basalt fiber gives the tripod tubes incredible stiffness to the leg assembly.The leg assemblies are integrated with the 75mm die-cast alloy bowl with precision resulting in...

Enhance your photography and videography capabilities with the precision-engineered CX10 Fluid Head paired with the robust Sprinter II 2-Section Aluminum Alloy Tripod and Ground Spreader. This professional-grade tripod system is designed to offer unparalleled stability and fluid movement, thanks to its 100mm ball leveling fluid head, making it an ideal choice for both aspiring and seasoned professionals seeking high-quality equipment.The CX10 Fluid Head is equipped with Miller's advanced CB Plus technology, featuring 16 distinct counterbalance positions, allowing for fine-tuned adjustments to accommodate a wide range of camera configurations. This ensures that your camera remains steady and balanced, regardless of the lens or accessory setup. Additionally, the fluid head offers 5+0 levels of pan and tilt drag settings, providing silky-smooth movements for dynamic and cinematic shots.With a generous 60mm of camera plate travel, the CX10 Fluid Head allows for quick and precise balancing of your camera system. This feature is particularly beneficial when working with varying equipment weights, ensuring that you maintain optimal control and stability during your shoots.The Sprinter II Tripod, constructed from durable aluminum alloy, boasts a 2-section design that provides a sturdy base for the fluid head. The tripod's impressive maximum load capacity of 25.1 to 30 lbs caters to heavier camera setups, including those with extended lenses or additional accessories. Its height range of 55.1" to 65" offers versatility in shot composition, enabling you to capture high-angle perspectives with ease.For added stability on diverse terrains, the system includes a reliable ground spreader that anchors the tripod, ensuring it remains immovable during operation. This feature is particularly useful when filming in outdoor or uneven environments, where wind and ground irregularities can pose challenges.The entire system is designed with the professional in mind, offering a combination of sturdy construction, versatile functionality, and ease of use. Whether you're capturing fast-paced sports events, intricate documentary footage, or creating cinematic masterpieces, the CX10 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and Ground Spreader is your reliable partner for achieving smooth and stable shots.Included with this high-performance tripod system is a convenient carrying case, providing protection and portability for photographers and videographers on the move. Elevate your visual storytelling with this exceptional tripod system, crafted to meet the demands of dynamic shooting environments.

Explore the world of professional photography and videography with the Arrowx 1 Sprinter II 2-Section Aluminum Tripod with Fluid Head and Ground Spreader. This sturdy and reliable tripod system is designed for quick setup, superior stability, and versatile payload capacity, making it an ideal choice for level terrain shoots. The Arrowx 1 system features a wide payload range of 0-16.0kg (0-35.3lbs), precision fluid drag, and Miller's innovative 16 position CB Plus counterbalance system. This unique sequential counterbalance design ensures accurate and rapid setup, delivering the flexibility, speed, and precision that professionals demand. With 5 + 0 selectable pan-tilt fluid drag positions, the Arrowx 1 is perfect for news gathering and documentaries, accommodating a broad range of cameras, lenses, and accessories.The Arrowx 1 Fluid Head, a 100mm Fluid head, is part of the highly successful Arrowx series, which includes Arrowx 3, 5, and 7. This professional fluid head offers an entry-level price point, making it an excellent choice for aspiring photographers and videographers. The patented 16 CB Plus technology ensures accurate and rapid setup, with eight larger counterbalance steps for quick and efficient positioning. The conveniently located "one flick" switch allows for fine-tuning of the counterbalance when required.The Arrowx 1 system is paired with the 1-stage Sprinter II (alloy) tripod and ground spreader, offering incredible speed of setup. The 1589G Sprinter II 1-Stage Tripod (Alloy) features a patented Miller design that allows for leg adjustment via a leg lock located high above the ground, eliminating the need for bending down. The dual-action leg lock system is designed for operators who require speed and convenience of setup without compromise. The black anodized leg assemblies are integrated with the precision-machined 100mm die-cast alloy bowl, resulting in a highly rigid tripod at any height.Experience the durability of the aluminum construction, the versatility of the ground spreader, and the high-quality performance of the Arrowx 1 Sprinter II 2-Section Aluminum Tripod with Fluid Head and Ground Spreader. It's not just a tripod; it's a tool for capturing your vision.

Over the years, Adorama has been committed to providing professionals and enthusiasts with top-tier equipment, and the CX14 Sprinter II 2-Section Aluminum Tripod System with CX14 Fluid Head and Ground Spreader is no exception. This high-quality, sturdy tripod system is engineered with a robust 100mm ball leveling fluid head, ensuring stable and precise shots for a variety of camera setups. The CX14 fluid head incorporates CB Plus technology, offering an impressive 16 positions of counterbalance and 5+0 settings of Miller's renowned fluid pan and tilt drag, accommodating payloads from 0 to 14.0 kg (0 to 30.9 lbs). This feature provides unmatched control and allows for fine-tuning to the specific weight of your camera configuration.The versatility of this system is further enhanced by its 60mm of camera plate travel, which grants you the flexibility to balance your camera perfectly for any shot. The durable 2-section aluminum tripod is designed to be both lightweight and strong, capable of supporting a significant load while resisting the wear and tear of frequent use. The inclusion of a ground spreader adds to the system's stability, making it reliable for both indoor and outdoor shoots.With a maximum extended height of 55.1 to 65 inches, the CX14 Sprinter II allows for a wide range of shooting angles, and its closed length of 30.1 to 35 inches means it remains relatively compact for transport and storage. The tripod's black finish not only gives it a professional appearance but also minimizes reflections that could disrupt your shooting environment.Whether you're capturing dynamic video content or crafting the perfect still shot, the CX14 Sprinter II 2-Section Aluminum Tripod System with CX14 Fluid Head and Ground Spreader is a versatile, reliable choice that promises to deliver smooth and stable footage across a multitude of scenarios.

With the Adorama 3752 CX10 Sprinter II, professional photographers and videographers gain a formidable ally in capturing stable and smooth footage. This 2-section aluminum alloy tripod system boasts a robust 100mm ball leveling fluid head, specifically designed for those who require the unwavering stability that only a 100mm tripod can offer. The CX10 fluid head integrates CB Plus technology, featuring an impressive 16 positions of counterbalance. This advanced system allows for precise adjustments to accommodate a wide range of camera configurations, ensuring optimal performance and control.The fluid head also offers 5+0 levels of pan and tilt drag settings, courtesy of Miller's renowned fluid drag system. With 60mm of camera plate travel, users can fine-tune the balance of their equipment with ease. Whether you're shooting on flat surfaces or rugged terrain, the CX10's versatility shines through. The tripod's mid-level spreader contributes to its adaptability, allowing for a variable footprint that ensures stability on uneven ground.The Sprinter II tripod itself is a testament to durability and quality. Constructed from high-quality aluminum alloy, it is both sturdy and lightweight, making it an ideal choice for on-the-go shooting scenarios. Its maximum load capacity of 25.1 to 30 lbs means it can comfortably support heavier camera setups, including those with additional accessories. The tripod's height range of 55.1" to 65" when fully extended, and a minimum height of 30.1" to 35", provides ample flexibility for various shooting requirements.The quick-release mechanism is a testament to the system's thoughtful design, facilitating swift setup and breakdown, which is crucial in dynamic shooting environments. The CX10 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and Mid-Level Spreader is a reliable, high-quality solution for professionals seeking a versatile and reliable support system for their photography and videography projects.

Experience the unparalleled stability and versatility of the Arrowx 7 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and 993 Mid-Level Spreader. This professional-grade camera support system is designed for quick setup, exceptional stability, and flexible payload capacity, making it an ideal choice for Electronic Field Production (EFP), studio work, and Field Outside Broadcasting (OB).The Arrowx 7 Fluid Head, a proud addition to the globally acclaimed Arrow series, sets new standards in professional camera support. It features a wide payload range of 6-25kg (13.23-55.12 lbs), precision fluid drag, and Miller's innovative 16 position CB Plus counterbalance system. This unique system offers eight larger counterbalance steps and a "one flick" switch for fine-tuning, ensuring rapid, accurate, and repeatable setup. The Sprinter II 2-Section Aluminum Alloy Tripod complements the Arrowx 7 Fluid Head perfectly. Its patented design allows for high-level leg adjustment, eliminating the need for operators to bend down during setup. The tripod's dual-action leg lock system can be operated in unison or independently, providing speed and convenience without compromise. The black anodized leg assemblies are integrated with a precision-machined 100mm die-cast alloy bowl, ensuring maximum rigidity at any height.The 993 Mid-Level Spreader offers continuous variable adjustment between maximum and minimum tripod height settings. This design ensures rapid setup and pull down by maintaining the tripod legs at an equal or pre-set distance relative to each other. The system also includes pull-over rubber stirrup feet for extra grip and durability, a telescopic pan handle extendable by 200mm (7.9"), and a weatherproof ballistic nylon softcase with padded carry straps and a head-end cradle for secure transport. With a maximum load capacity of 50.1 to 70 lbs, the Arrowx 7 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and 993 Mid-Level Spreader is suitable for a wide range of cameras, lenses, and accessories. Whether you're shooting still photography, film, or video production, this system delivers the flexibility, speed of setup, and accuracy of shot that professionals demand.

Over the years, Adorama has been committed to providing professionals with reliable and high-quality equipment, and the CX14 Sprinter II 2-Section Aluminum Tripod System with CX14 Fluid Head and Mid-Level Spreader is no exception. This robust and sturdy tripod system is designed with a 100mm ball leveling fluid head, ensuring that users achieve the stability that is synonymous with 100mm tripods, while also offering cost-effective solutions.The CX14 Sprinter II is engineered with the innovative CB Plus technology, which boasts 16 positions of counterbalance. This feature, combined with the 5+0 settings of Miller's renowned fluid pan and tilt drag system, allows for seamless adjustments and precise control, making it perfect for a wide range of payloads up to 14.0 kg (0 - 30.9 lbs). The 60mm camera plate travel is a testament to its versatility, enabling photographers and videographers to fine-tune their camera configuration to suit any shot.Constructed from durable aluminum, this 2-section tripod system is not only reliable but also versatile, with a mid-level spreader that enhances stability and simplifies the adjustment of the legs. This makes it an ideal choice for various shooting scenarios, whether in the studio or on location. The tripod can be adjusted to a minimum height of 25.1 to 30 inches and a maximum height of 55.1 to 65 inches, catering to a range of shooting requirements.The quick release plate is a convenient addition, allowing for swift setup and adjustments, ensuring that you never miss a shot due to cumbersome equipment. Whether you're a photographer, videographer, or filmmaker, the CX14 Sprinter II 2-Section Aluminum Tripod System with CX14 Fluid Head and Mid-Level Spreader is designed to support your creative endeavors with a stable and adaptable camera support system.

Explore the world of professional photography and videography with the Arrowx 5 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and 993 Mid-Level Spreader. This high-quality, sturdy and reliable system is designed for speed of setup, high level of stability, and flexibility of payloads, making it an ideal choice for professionals in the field.The Arrowx 5 Fluid Head is a part of the world-renowned Arrow series, known for setting new dimensions in professional camera support. It features a wide payload range of 2-21kg (4.4-46.2 lbs), precision fluid drag, and Miller's innovative 16 position CB Plus counterbalance system. This system delivers the flexibility, speed of setup, and accuracy of shot that professionals expect and demand. Its 7 + 0 selectable pan-tilt fluid drag positions make it ideal for ENG and EFP, enabling it to be used with a wide range of cameras, lenses, and accessories.The Sprinter II 2-Section Aluminum Alloy Tripod, matched with the Arrowx 5, offers incredible speed of setup, a hugely variable tripod footprint, and the versatility to set up on all terrains. Its patented Miller design allows for leg adjustment via a leg lock conveniently located high above the ground, eliminating the need for the operator to bend down. The tripod's black anodized leg assemblies are integrated with the precision-machined 100mm die-cast alloy bowl, resulting in a highly rigid tripod at any height.The 993 Mid-Level Spreader offers continuous variable adjustment between maximum and minimum tripod height settings. It enables rapid setup and pull down by keeping the tripod legs at an equal or pre-set distance relative to each other. The spreader is complemented by pull-over rubber stirrup feet, constructed from composite polymers and fitted with tough, durable rubber soles for extra grip and durability.The system also includes a telescopic pan handle with clamp, extendable by 200mm (7.9"), and a softcase for 1 stage tripods. The softcase, made from weatherproof ballistic nylon, features padded carry straps, a head-end cradle to protect the fluid head during transport, and heavy-duty zippers on the bag and all pockets. It also features backpack straps which can be stored within an external pocket when not required.With a maximum load capacity of 40.1 to 50 lbs and a maximum extended height of 55.1 to 65 inches, the Arrowx 5 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and 993 Mid-Level Spreader is a versatile, durable, and high-quality choice for all your professional photography and videography needs.

It's the Arrowx 7 Fluid Head with Sprinter II 2-Section Aluminum Alloy Tripod and 470 Ground Spreader, a professional-grade camera support system designed for speed, stability, and versatility. This system is perfect for level terrain and offers a wide payload range of 6-25kg (13.23-55.12 lbs), making it suitable for a variety of cameras, lenses, and accessories. The ArrowX 7 Fluid Head is a key component of this system, following in the footsteps of the globally recognized Arrow series. It introduces new dimensions in professional camera support, enhancing the creative power of professionals. It features precision fluid drag and Miller's innovative 16 position CB Plus counterbalance system, delivering the flexibility, speed of set up, and shot accuracy that professionals require. The CB Plus is a revolutionary sequential counterbalance design that takes traditional counterbalancing a step further, ensuring repeatable, accurate, and rapid setup. The system also includes the Sprinter II 1 Stage Alloy Tripod, a patented Miller design that allows for leg adjustment via a leg lock located high above the ground, eliminating the need for bending down. The tripod's dual-action leg lock system is designed for operators who require speed and convenience of setup without compromise. The black anodized leg assemblies are integrated with a precision-machined 100mm die-cast alloy bowl, ensuring a highly rigid tripod at any height.The 470 Ground Spreader, with its flexible, adjustable spreader arms and pullover rubber stirrups, is quick to set up and requires minimal maintenance. It can be used on even and semi-even ground and attaches directly to the spiked feet at the bottom of the Sprinter II tripods. This spreader is optimized for use on flat surfaces, and its telescoping spreader arms allow for rapid setup and pull down.The system also comes with a telescopic pan handle with clamp, extendable by 200mm (7.9"), suitable for Compass 25, ArrowX 3, 5, and 7. Finally, the ArrowX softcase for 1 stage tripods, made from weatherproof ballistic nylon, offers padded carry straps and a head-end cradle to protect the fluid head during transport. The softcase features backpack straps that can be stored within an external pocket when not required, making it a convenient and protective solution for your tripod system.

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle's stock shackle. All Dorman products are engineered in the United States and backed by 100 years of automotive aftermarket experience. Our solutions are thoroughly tested and inspected, and if you experience any difficulty installing or using our parts, we have a dedicated technical support team of ASE Blue Seal certified professionals ready to help. To learn more about our quality and innovation, visit DormanProducts.com.

Dorman's Leaf Spring Hanger comes with all the components necessary for a complete repair. The mounting hardware provided ensures a trouble-free installation. All Dorman products are engineered in the United States and backed by 100 years of automotive aftermarket experience. Our solutions are thoroughly tested and inspected, and if you experience any difficulty installing or using our parts, we have a dedicated technical support team of ASE Blue Seal certified professionals ready to help. To learn more about our quality and innovation, visit DormanProducts.com.

Faux Wood Blinds are a classic window treatment that never goes out of style. They add a touch of elegance and functionality to various rooms in the home and office. The textured finish and light control options make them perfect for creating an inviting atmosphere. Combining cordless operating with a matching valance, you not only prioritize child and pet safety in your home, it also complements the overall design of your window treatment. Faux Wood blinds are an excellent choice for both home and commercial use due to their versatility, durability, easy to maintain and resistant to moisture. Color: Textured Dark Oak. Material: PVC.

The Sprinter Boxwood (Buxus) Live Evergreen Shrub adds foliage and beauty to any outdoor space. This durable plant will stay green all year-round, so you never have to worry about it dying. It will grow anywhere from 2 to 4 ft. tall for elegant hedging.

Our Ottohome Collection boasts a wide array of rugs ranging from solid colors to unique prints and come in a wide range of shapes and sizes. Made in Turkey, these Polyamide rubber back rugs will provide style throughout your home while also keeping your family safe with its non-slip rubber backing. Our sleek and functional low pile will help you place these rugs in areas where it would otherwise be difficult. These Turkish rugs are made from quality materials that are family and pet friendly and perfect for high traffic areas of your home such as the living room, bathroom, kitchen, and hallways. Here at Ottomanson, our mission is to deliver the highest quality rugs possible at the most competitive rates. Color: 2318-Dark Brown. Pattern: Border.

What sets the Medium Watertight Smart Case by Miller apart is its robust design and advanced features, making it the perfect companion for your 1-stage sprinter/toggle/2-stage HD tripod systems. This sturdy, break-resistant case is meticulously crafted from a unique blend of high-pressure resin, special polymers, and aluminum, offering unparalleled durability and protection for your valuable equipment.The case's watertight seal is ensured by a neoprene O-ring and a one-way valve, safeguarding your gear from water damage during transit. This feature makes it an ideal choice for photographers and videographers who frequently work in challenging weather conditions or damp environments.Ease of transport is a key feature of this smart case. It is equipped with built-in wheels and soft rubber handles, facilitating effortless maneuverability during your travels. The case's design also incorporates foam pads and removable fabric head and foot pads, providing additional security and preventing damage to your tripod system.The case opens along its long side, secured by four robust latches, and can be locked for extra security (lock not sold with the case). Available in a sleek black color, this case is designed to accommodate all Miller systems, with a length ranging from 40 to 45 inches. In summary, the Medium Watertight Smart Case with Wheels for 1-Stage Sprinter/Toggle/2 Stage HD Tripod Systems is a reliable, strong, and protective solution for transporting your tripod systems, ensuring they remain in pristine condition, no matter where your work takes you.