282 products were found matching your search for Sewage in 4 shops:

The Superior Pump 92060 Pump Alarm System provides early warning of pump failure. Simple to install, the Pump Alarm System with tethered float switch, will sound when water levels reach a level pre-set by you. The unit operates on 115-Volt and includes a 9-Volt battery backup and an automatic alarm reset. Alarm tethered float switch features a 15 ft. power cord and hardware to attach the switch to your pumps discharge pipe. Alarm offers an 87 dB horn and low battery "CHIRP". Pump Alarm System will work in both sump and sewage applications. Kit includes: alarm, alarm float, float mounting hardware and installation instructions.

Rather than polluting watercourses with sewage, many ways exist to recycle it. Sewage Solutions explains such natural methods of treatment as reed beds, cess pits, water stabilization ponds, septic tanks and compost toilets, and also describes how to collect and recycle waste water. Whether connected to municipal drain systems or not, this is the guide for all interested in the complete process of sewage recycling. Note that this book originates from Europe and may contain measurement units, etc. not commonly used in the US.

VEVOR Submersible Sewage Pump Water Pump 3/4 HP 5880GPH Cast Iron with FloatEfficient & Durable MotorExcellent PerformanceChoose How You OperateRuns on Its OwnPremium MaterialsEasy to InstallAmps: 10 A,Power Cord Length: 10 ft / 3 m,House Power: 3/4 HP,Max. Flow: 98 GPM,Input Power: 1050 W,Voltage: 120V 60HZ,Protection Type: IPX8,Model: USC56WE,Max. Lift: 37 ft/11 m,Water Temperature: 32-95℉ / 0-35℃

The 9SC Series submersible effluent pump from LITTLE GIANT is specifically engineered to handle the tough demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas. The 2-pole motor provides increased speed and yields higher performance at higher heads.

The Everbilt 3/4 HP submersible sewage pump is constructed of heavy - duty cast iron and features a PSC motor for energy efficiency and savings. The pump is engineered to pass 2 in. solids and designed for use in wastewater applications such as basement sewage systems, mound systems, effluent/sewer. Laundry facilities, grain storage and high capacity dewatering purposes.

Wayne's RPP50 1/2 HP sewage pump, pumps up to 4800 GPH with 5 ft. of lift. This pump is manufactured with a durable cast iron motor and pump housing and a replaceable piggyback tether switch for automatic or manual operation. The RPP50 is capable of passing 2 in. solids, and is perfect and ideal for below-grade installations.

The Superior Pump 1/2 HP submersible sewage pump will move up to 80 Gal. of water per minute. This pump is made of rugged cast iron construction and includes an adjustable tethered float switch with piggy back plug to automatically turn the pump on/off. The 93501 offers a powerful, yet energy efficient (7.6 Amp) thermally protected motor for longer life and durability. The pump features non-clogging vortex impeller, 2 in. FIP discharge and 10 ft., replaceable, water proof power cord. This sewage pump is specifically designed to work in all sewage applications and will easily handle 2 in. solids. UL/CUL listed and CSA certified and backed by a 1 year warranty.

The Wayne SEL50 is a 1/2 HP, durable reinforced thermoplastic sewage pump that performs up to 10000 GPH at 0 ft. It is designed to fit in 18 in. or larger sewage basins. Is ideal for basement or below-grade installations.

The THD1026 is extremely durable, heavy duty sewage pump check valve. It will pass a full 2 in. solid. The easy grab couplings make pump servicing a snap. Constructed from ABS with PVC compression couplings the THD1026 will provide decades of reliable service. Industries most durable and ultra-quiet flapper. Flow arrow on valve and label. Material: Acrylonitrile Butadiene Styrene (ABS).

The universal design of the PiggyBack Float Switch from Everbilt is compatible with various sump pumps. The perfection solution to replacing the switch for your sump and sewage pumps. Features a wide-angle tethered design and ideal for use in larger diameter basins of 14 in. or more.

Liberty's LE50-series cast iron sewage pump is a commercial-grade workhorse for residential and light commercial applications. Its efficient 1/2 hp motor with permanently lubricated bearings, stainless steel fasteners and quick-disconnect power cord design make this a favorite choice among professionals. Other features include 2 in. solids-handling ability and a shut-off head of 25 ft.

This pump is an automatic submersible sewage pump with a 1/2, 115-Volt motor and a 25 ft. quick-disconnect power cord. It's equipped with an adjustable wide-angle switch that has a piggyback series plug for manual bypass operation. Therefore if the switch fails to operate, the submersible sewage pump cord can be separated and plugged into an electrical outlet, directly bypassing the switch.

The Pro380-Series is a large capacity shallow system design featuring a 24 in. x 24 in. basin - perfect for bedrock and difficult soil conditions. The Pro380-Series offers a large 41 Gal. capacity and longer pump cycles for extended pump life. The Pro380-Series sewage package arrives from the factory pre-assembled saving valuable labor time at the job site. Give the Pro380 a try and see why more contractors are demanding Liberty. The Pro-Series is backed by Liberty's standard 3-year warranty.

The Liberty Pump LE41A is an automatic submersible sewage pump with 4/10 HP and 115-Volt motor. The 10 ft. quick-disconnect power cord allows replacement of cord in seconds without breaking seals to motor. The Liberty sewage pump is equipped with an adjustable wide-angle switch that has a piggyback series plug for manual bypass operation. In the event of switch failure, the submersible sewage pump cord can be separated and plugged into the electrical outlet, directly bypassing the switch.

The Liberty LE41M-2 is a 4/10 HP, 115-Volt manual submersible sewage pump with a 25 ft. quick-disconnect power cord. Heavy-duty and reliable, This Liberty sewage pump is intended for usage with approved liquid level control or approved motor control with correct rating that matches motor input in full load amperes. This pump features all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling.

The Liberty LE41M is a 4/10 HP, 115-Volt manual submersible sewage pump with a 10 ft. quick-disconnect power cord. Heavy-duty built and reliable, The LE41M is the perfect choice for residential sewage applications. The pump is intended for usage with approved liquid level control or approved motor control with correct rating that matches motor input in full load amperes.

Engineered to allow for maximum flow from your pump. PumpSpy in.full-flow in. check valves prevent the water that remains in the discharge pipe from falling back into the pit. This avoids pumping the same contents twice, extending the life of your pump. Features a clear valve body so that movement of pumped content is visible, making it easier to verify that your pump is flowing properly and the valve is seating when closed. The unique spring-loaded flapper eliminates the water hammer noise of standard check valves. Comprised of durable ABS construction for years of service and reliability. Includes 2 inch Buna-N rubber couplings for connecting the check valve inline with 2 inch discharge pipes. All check valve connections feature stainless steel hose clamps to prevent rust and corrosion while providing a secure, leak-proof connection.

Professional Submersible Sewage Pump. Featuring a powerful 0.5HP motor, delivering an impressive 4188GPH flow rate and a high lift of 24 ft., our sewage pump excels in both basement and outdoor drainage tasks. With built-in overload and overheat protection, a stainless steel body, and cast iron housing, it keeps your space dry.

VEVOR RV Portable Macerator Pump, 12V, 12GMP Quick Release RV Waste Pump, RV Sewage Sewer Pump with Detachable Quick Connection Valve Metal Hose Clamp Power Cord, for RV Boat Marine Motorhome CamperLong-Distance DrainageNo More Clogging HassleAutomatic CleaningPowered by Vehicle BatteryEasy OperationWide ApplicationOutlet Port: 1 in Hose Barb,Blade Type: Double Four-bladed Blades,Max. Flow: 12 GPM,Inlet Port: 3 in/75 mm RV Connector,Voltage: 12V DC,Item Model Number: NMMP12-G120-12-1,Net Weight: 6.28 lbs / 2.85 kg,Lift: 10 ft/3 m,Product Size: 11.6 x 5.83 x 5.22 in / 295.5 x 148.2 x 132.7 mm

The Everbilt 18 in. x 30 in. Sewage Pump Basin is designed to hold a sump, liquid waste or sewage pump. Offering a true 30 Gal. capacity, and factory punched inlet that is accepts drain tile and 4 in. grommets. Comes with pre-drilled holes on the rim of the basin for accepting the mounting and securing a cover (sold separately). The basin features a durable and reliable heavy-duty construction of injection-molded structural foam polyethylene.