203 products were found matching your search for Steadicam in 1 shops:

Video 25 Plus Fluid HeadVideo 25 Plus... Fast, safe, reliable. The Video 25 Plus displays an 18-step counterbalance that can be adjusted easily and safely in 9 stages with our well-known dial. Fine tuning is achieved via a half step function which can either be engaged or disengaged. The Video 25 Plus 7 step damping system delivers the same outstanding performance as the proven Video 20 Plus system. The selfilluminating Touch Bubble, which runs on conventional batteries, helps you level the camera even in poor lighting conditions. With a maximum payload of 32 kg / 71 lb, the Video 25 Plus is ideally suited to HDTV and wide screen cameras. That's why a viewfinder extension bracket is included as a standard accessory.With the Video 25 Plus fluid head and its seven-step, temperature-independent damping system, professional camera operators capture the naked truth on film with perfect clarity. Need to change position? Tilt angles up to 90 Degree are no trouble for the Video 25 Plus, even under maximum load.150 EFP 2 CF TripodThe Sachtler 150 EFP 2 CF Carbon Fiber Tripod Legs two stage tripod, provides maximum stability and carrying capacity. Constructed and drawn out of one-piece carbon fiber material, makes it twist resistant and lighter than dural aluminum. It features a 150mm / 6" bowl, tube diameter of 22mm (0.87") and is fitted with the Sachtler quick clamping system, so you can securely - and visibly - lock the tripod.The 150 EFP 2 CF's double extension provides greater stability, allowing an extended height range with a payload of 209 lbs and with a weight of only 9.6-lbs it's extremely lightweight, solid and stable.Mid-level SpreaderThis Mid-level Off-ground Spreader is for shooting on un-even surfaces such as slopes, rocky terrain, steps, or multiple surface shots, where all surfaces aren't on the same plane. It attaches to the center braces of the tripods the sreader is intended for, allowing extension of the tripod legs without detaching the telescopic spreader. Rapid set-up and pull down thus is natural as the legs are maintained equally or as preset, relatively. Recommended for all tripods 100 and 150 mm bowl, OB 2000 Mitchell and Cine 2000 and 2000 Medium, (except DA 150 short and Cine 2000 short).Dolly DV100Dolly with 100 mm / 4" wheel diameter, with tracking locks and cable guards, recommended for all tripods 100 mm and 150 mm bowl (except tripods DA 100 short and DA 150 short). (Please Note: This Dolly is NOT for Hot pod or DA 100/ 150 short / OB2000 or the Cine 2000)

Take your videography to the next level with the A-NNPANN Aero Camera Stabilizer Sled from Steadicam. This robust and lightweight sled is designed with a sturdy carbon-fiber post that extends from 22.5 to 33.5 inches, offering you the flexibility to capture shots from various angles. Engineered for 3G-HD compatibility, this high-quality camera stabilizer sled ensures crystal clear, professional-grade video footage. It comes with multiple battery mount options, specifically optimized for Panasonic D28 batteries, providing you with the power you need for extended shooting sessions. The A-NNPANN Aero Camera Stabilizer Sled is designed with user-friendly, tool-free adjustments, allowing for quick and easy setup changes on the go. The detachable sled base not only makes it easy to store and transport but also enhances its versatility, making it a reliable choice for a wide range of filming and photography needs.This durable camera stabilizer sled is compatible with any Steadicam vest, reinforcing its versatility and adaptability. Whether you're into filmmaking, photography, or surveillance, the A-NNPANN Aero Camera Stabilizer Sled is a reliable tool that will add a new dimension to your work.

The Steadicam SOLO is a professional shooting instrument. It's also a brand new critter - a radical hybrid that crosses-over seamlessly from Steadicam to monopod and performs tricks in between that neither can do alone. You may be a veteran Steadicam ace looking for the ultimate run-and-gun rig for your new digital camera, or a seasoned conventional shooter, eager to expand your technique, or maybe you're new to the game: a film student or gifted amateur, ready to edge into the professional world in any case you're in for a rewarding experience. Your new SOLO is a true Steadicam: precise, rigid and beautifully engineered, and it's also a brilliant and versatile monopod; but most startling to me, after decades of shooting, is the realization that SOLO can deliver combination shots I never imagined, and with a speedy panache that would spin the heads of my old Hollywood colleagues. With its inertia-augmenting "wings" folded out, monopod shooting is stable in all three axes - tilt and roll,' obviously, but now also "pan" - and with SOLO also balanced in Steadicam mode (at any desired length), you can smoothly "lift off" and walk, run or climb stairs like your favorite moves from the movies. You can hoist the camera up for ceiling-height "aerials" or invert it to skim the floor, and then seamlessly return to monopod or Steadicam-mode - with or without the optional arm and vest. We have entered a new, highly democratic era in filmmakin g, and our tools are ever more accessible for shooting, editing and special effects. Increasingly, success may finally depend more on skill and talent than on big budgets - and SOLO can help you get there. This latest iteration of the "noble instrument" is cool and it's HOT and I look forward to seeing your results - in sample reels, documentaries, commercials, home videos, reality TV and feature films! ABOUT THE SOLO The SOLO Arm and Vest makes extended shooting nearly effortless, providing complete comfort and functionality for extended productions and long continuous shots. The SOLO can now fly for hours - shooting entire weddings, sporting events, or theatrical performances - without undue fatigue. The SOLO offers Steadicam brand engineering and quality at a price you'll love. Versatile: • Up to 10lb (4.5kg) weight capacity Adaptable: • Able to convert between a Steadicam and monopod easilyCompact: • Folds up to a 24? x 3.5? (61cm x 9cm) profileDurable: • All metal infrastructure design Comfortable: • Ergonomic foam gimbal handle and post control grips • Can be used handheld or with available arm/vest Precision: • High quality 3-axis gimbal • Solid precision stage design Adjustable: • Telescopic 4-section post Unique dynamic balance capability Moveable gimbal Removable Stage Design: • Quick release camera mounting plate • Push on lock • Pushbutton release • Positive position clamping • Standard 1/4-20 and 3/8-16 camera mounting • Simple dual knob...

Bring precision to your Ultra, Clipper, Shadow, Archer, Flyer, or Zephyr series equipment with our 36" Assembly Tally Sensor. This essential piece of equipment is designed to enhance your device's performance by providing accurate and reliable readings. The package includes both male and female Velcro for easy and secure mounting. Ideal for professionals and enthusiasts alike, this tally sensor is a must-have for anyone looking to optimize their electronic equipment. With its robust construction and easy installation, this 36" Assembly Tally Sensor is a valuable addition to your gear. Experience the difference in accuracy and performance with our Assembly Tally Sensor.

Overcome the challenges of mounting your Sony or Canon video cameras with the Jr. Camera Mounting Plate, a robust solution designed to accommodate cameras with swing-out LCD screens or right side-mounted batteries. This durable and sturdy mounting plate ensures your camera fits securely onto the Jr. Stabilizer, providing a reliable base for capturing smooth, professional-quality footage.Crafted with versatility in mind, this high-quality mounting plate is compatible with a range of Canon and Sony camcorders, making it an indispensable accessory for videographers who utilize equipment from both brands. Whether you're shooting on location or in a studio, this mounting plate is engineered to offer a stable and secure platform, enhancing the functionality of your tripod or support system.The Jr. Camera Mounting Plate is a testament to Steadicam's commitment to excellence in camera stabilization equipment. Its robust construction and thoughtful design ensure that your camera remains steady during dynamic shoots, allowing you to focus on your craft without worrying about camera stability.By choosing the Jr. Camera Mounting Plate by Steadicam, you're investing in a product that not only broadens your camera's compatibility with various support systems but also upholds the high standards of quality and performance that professionals expect. Enhance your videography setup with this essential mounting plate, and experience the difference that a secure, versatile, and reliable camera mount can make in your production workflow.

Enhance your Steadicam setup with the precision-engineered 802-7417 Spare Camera Dovetail Plate, Long. This durable mounting solution is crafted from high-quality materials, offering a robust and sturdy platform for your medium stage camera rig. Designed for reliability, this long dovetail plate ensures a secure attachment of your camera to the Steadicam rig, providing peace of mind during dynamic shooting sessions.The 802-7417 plate features a convenient rack for precise fore-aft adjustment, allowing for optimal balance and control of your camera system. Its reliable construction not only withstands the rigors of frequent use but also maintains stability to support a variety of cameras, making it an indispensable tool for professional photographers and videographers seeking versatility in their equipment.Whether you're in need of a replacement or an additional camera plate, the 802-7417 Spare Camera Dovetail Plate, Long is the perfect choice for enhancing the functionality of your Steadicam rig. Its compatibility with a wide range of camera models further solidifies its status as a versatile and essential component in any filmmaker's kit. Secure your camera with confidence and precision, and capture smooth, high-quality footage with this indispensable Steadicam accessory.

It's the Steadicam Deluxe .5" Docking Bracket, a robust and reliable solution for docking and balancing your camera sled. Crafted with precision, this heavy-duty bracket is designed to attach seamlessly to most 16mm / 5/8" C-Stands, providing a sturdy and secure base for your equipment. The standout feature of this durable docking bracket is its sliding and lockable top spar. This allows for easy adjustments and precise positioning of your camera or other equipment, ensuring optimal performance and stability. The bracket also includes a 1/2" balance pin, which further enhances the balance and stability of your setup. In addition, the Steadicam Deluxe .5" Docking Bracket comes with an arm hanger, offering additional support and convenience. This versatile docking bracket is compatible with a wide range of cameras and camera rigs, making it an essential accessory for photographers, videographers, and other industry professionals. Experience the blend of functionality and reliability with the Steadicam Deluxe .5" Docking Bracket, a testament to Steadicam's reputation for producing high-quality camera stabilization equipment.

When capturing professional-grade photos and videos, the A-NNCANN Aero Camera Stabilizer Sled is an essential tool. Engineered by the renowned brand SteadiCam, this robust and lightweight sled is designed to provide unparalleled stability for your camera equipment. Constructed from high-quality materials, this durable stabilizer sled boasts a 3G-HD compatibility, ensuring your footage is always of the highest quality. It features multiple battery mount options, with a particular optimization for Canon LP-E6 batteries, offering you the flexibility to use the power source that best suits your needs. The stabilizer sled's design includes a removable sled base, facilitating easy storage and transport. This feature, coupled with its tool-free adjustment capability, makes it a user-friendly addition to any videography or photography setup. The A-NNCANN Aero Camera Stabilizer Sled stands out with its two-section carbon fiber post, which is extendable from 22.5 to 33.5 inches. This adjustability allows you to find the perfect angle for every shot, enhancing the versatility of your equipment. Finally, this reliable stabilizer sled is compatible with any SteadiCam vest, further broadening its range of use. Whether you're a professional videographer or a passionate hobbyist, the A-NNCANN Aero Camera Stabilizer Sled is a sturdy and reliable choice for enhancing your camera stability and improving the quality of your work.

Why settle for less when you can have the best? The Steadicam 078-5238-01 is not just a backpack; it's a durable and protective transport softcase specifically designed for Steadicam Merlin and Pilot systems. Crafted with high-quality materials, this backpack case is built to last, ensuring your valuable stabilizing equipment is shielded from potential damage. The stylish design of this backpack case is complemented by its spacious interior, providing ample room for your equipment. With its adjustable padding, you can customize the fit to securely hold your gear, preventing unnecessary movement and potential damage during transport. The backpack design doesn't just offer protection; it also makes transportation of your equipment a breeze. Organize your gear with ease, thanks to the thoughtful layout and quality zippers and closures. Whether you're a professional photographer or a videographer, the Steadicam 078-5238-01 backpack case is an essential accessory for your Merlin and Pilot systems. Experience the comfort and convenience of carrying your stabilizing equipment in a backpack designed with your needs in mind. Choose the Steadicam 078-5238-01 backpack case for a seamless, worry-free transportation solution for your Steadicam Merlin and Pilot systems.

Overcome the challenges of on-the-go videography with the ElipZ Quick Release Shoe, a sturdy and reliable accessory specifically designed for the Pilot HD Camera Stabilizer System. This high-quality, innovative product ensures a secure and stable fit, enhancing the performance of your stabilizer system and providing you with smooth, professional-grade footage. The ElipZ Quick Release Shoe is not just durable but also incredibly convenient. Its quick-release adapter/plate feature allows for effortless attachment and detachment of the camera, saving you time and effort during shoots. Whether you're filming a dynamic action scene or capturing a serene landscape, this product simplifies the process, making it an essential tool for handheld shots. Experience the difference of a well-engineered accessory with the ElipZ Quick Release Shoe for the Pilot HD Camera Stabilizer System. Its robust construction and innovative design make it a reliable choice for videographers seeking to enhance their stabilizer system's performance. With its easy-to-use quick-release mechanism, you can attach and detach your camera with ease, making it an indispensable addition to your videography equipment.

Overcome the challenges of capturing smooth, professional-grade footage with the A-NNNPNN Aero Camera Stabilizer Sled. This sturdy and reliable tool, optimized for Sony NP-F970 batteries, is a must-have for any videographer or photographer. Crafted from lightweight yet durable materials, this SteadiCam sled offers a blend of strength and convenience that is hard to beat.The stabilizer sled is 3G-HD compatible, ensuring high-quality video capture across a range of devices. Its versatile design includes multiple battery mount options, providing flexibility for your shooting needs. This particular unit is specifically designed to work seamlessly with Sony NP-F batteries, enhancing its usability for Sony camera users.The A-NNNPNN Aero Camera Stabilizer Sled comes with a detachable sled base, making it easy to store and transport. It also features tool-free adjustments, allowing you to quickly and easily modify the setup to suit your specific requirements. The two-section carbon fiber post is extendable from 22.5 to 33.5 inches (57.2 to 90.2 cm), providing you with the flexibility to find the perfect angle for your shots. This feature, combined with the sled's compatibility with any SteadiCam vest, makes it a versatile tool for a wide range of filming and photography scenarios.Please note that while this model does not come with a monitor, it is available with a 7-inch 1000 nit monitor. This A-NNNPNN Aero Camera Stabilizer Sled is a testament to SteadiCam's commitment to providing high-quality, professional equipment for the film and photography industry.

Where precision and stability are paramount, the SteadiCam Plate for AERO 15 / AERO 30 Camera Stabilizer Sled is your go-to accessory. Expertly engineered, this plate is exclusively designed to complement the AERO 15 and AERO 30 Camera Stabilizer Sleds, enhancing their performance and versatility. This SteadiCam Plate is an essential component for videographers and photographers who prioritize smooth, stable footage. It integrates seamlessly with your AERO 15 or AERO 30 Stabilizer Sled, providing a secure and reliable base for your camera equipment. Constructed with meticulous attention to detail, the SteadiCam Plate ensures optimal balance and control, allowing you to capture high-quality, professional-grade visuals with ease. Whether you're shooting a dynamic action scene or a serene landscape, this plate offers the stability and precision you need. Incorporate the SteadiCam Plate for AERO 15 / AERO 30 Camera Stabilizer Sled into your gear collection and experience the difference in your video and photography endeavors. This product is a testament to SteadiCam's commitment to quality, innovation, and the pursuit of perfecting camera stabilization technology.

After extensive research and development, Steadicam presents the A-NNVLNN Aero Camera Stabilizer Sled, a professional-grade, durable tool designed to enhance your videography and photography. This sturdy and reliable camera stabilizer sled is optimized for V-Lock batteries, offering multiple battery mount options for maximum flexibility. Constructed with a lightweight yet rigid structure, this high-quality stabilizer sled ensures optimal performance in various shooting scenarios. Its 3G-HD compatibility ensures seamless integration with advanced camera systems, making it a versatile choice for both professionals and hobbyists. The A-NNVLNN Aero Camera Stabilizer Sled features a removable sled base, facilitating easy storage and transport. It also offers tool-free adjustments, allowing you to customize the setup according to your shooting requirements without any hassle.One of the standout features of this camera stabilizer sled is its two-section carbon fiber post. This extendable post, ranging from 22.5 to 33.5 inches (57.2 - 90.2 cm), provides the flexibility to find the perfect angle for your shots. This camera stabilizer sled is designed to work seamlessly with any Steadicam vest, further enhancing its versatility. Please note that this unit does not include a monitor. In conclusion, the A-NNVLNN Aero Camera Stabilizer Sled with V-Lock Battery Mount is a testament to Steadicam's commitment to providing reliable, high-quality, and professional camera stabilization equipment.

Make your next video shoot a breeze with the A-NNBPNN Aero Camera Stabilizer Sled, specifically designed with a Sony BP-U battery mount and without a monitor. This SteadiCam product is a robust yet lightweight sled, engineered for 3G-HD compatibility, ensuring high-quality video output. The stabilizer sled is equipped with multiple battery mount options, but it's optimized for Sony BP-U batteries, providing you with reliable power for extended shooting sessions. The removable sled base offers convenience for easy storage and transport, making it an ideal choice for on-the-go videographers. The A-NNBPNN Aero Camera Stabilizer Sled stands out with its tool-free adjustment feature, allowing you to make quick and easy modifications on the fly. This user-friendly tool adds a new dimension to your video work, enhancing your ability to capture smooth, professional footage.The two-section carbon fiber post is extendable from 22.5 to 33.5 inches (57.2 - 90.2 cm), offering you the versatility to find the perfect angle for every shot. This feature, combined with the sled's compatibility with any SteadiCam vest, makes it a versatile tool for any videographer's kit.Whether you're a professional videographer or an enthusiast looking to upgrade your gear, the A-NNBPNN Aero Camera Stabilizer Sled with Sony BP-U Battery Mount is a high-quality, reliable choice that will enhance your video production capabilities.

Find the perfect balance for your photography and videography needs with the Steadicam 6017910 SteadiStand for the Merlin Stabilizer. This durable and sturdy stand is specifically designed to work seamlessly with the Merlin Stabilizer, providing a secure and stable platform for your camera or other photography equipment. Crafted from high-quality materials, the SteadiStand offers long-lasting durability and reliability, making it an ideal choice for professionals and hobbyists alike. Its versatile design allows for smooth and steady movement during filming or photography, enhancing the quality of your shots and providing you with the stability you need to capture the perfect moment. The SteadiStand is also portable and adjustable, making it easy to transport and set up in various shooting environments. Whether you're shooting in a studio or on location, the SteadiStand for the Merlin Stabilizer ensures your equipment is always secure and ready to capture stunning visuals. Incorporate the Steadicam 6017910 SteadiStand for the Merlin Stabilizer into your photography and videography setup for a reliable, versatile, and durable solution to your stabilization needs.

An essential tool for professional photographers and videographers, the Start Balance Weight with O-Ring is a durable and reliable accessory specifically designed for the Merlin, Pilot, and Zephyr camera stabilization systems. Crafted by the reputable brand, Steadicam, this high-quality counterbalance weight is engineered to enhance the stability of your camera during filming or photography sessions. The sturdy construction of this balance weight ensures long-lasting performance, while its compatibility with the Merlin, Pilot, and Zephyr systems makes it a targeted solution for users of these specific stabilization systems. The included O-Ring provides a secure fit, ensuring the weight stays in place even during intense shooting scenarios. Whether you're capturing dynamic action shots or shooting in challenging environments, the Start Balance Weight with O-Ring is a crucial component in achieving smooth, professional-grade footage. It's not just a balance weight, it's a commitment to quality and precision in every frame you capture.

When precision and stability are paramount in your videography, the Steadicam 801-7920-05 Middle Balance Weight with "O" Ring becomes an essential addition to your camera setup. This durable, heavy-duty counterbalance weight is expertly crafted to integrate seamlessly with the middle portion of the Merlin System, ensuring that your footage remains smooth and steady, even when using larger pieces of equipment or monitors.Constructed from high-quality materials, this sturdy weight is designed to withstand the rigors of both studio and field use, making it a reliable choice for professional videographers and cinematographers alike. The inclusion of the "O" ring is a testament to the thoughtful design, providing a secure and easy attachment point to your camera rig or gimbal. This feature allows for quick adjustments and ensures that once balance is achieved, it is maintained throughout your shoot.Whether you're capturing dynamic action scenes or crafting cinematic shots, the Steadicam 801-7920-05 offers the fine-tuned balance required for superior camera stabilization. By choosing this Steadicam accessory, you're investing in a product that is synonymous with quality and performance in the world of camera stabilization equipment. Enhance your visual storytelling with the confidence that comes from using a product designed to deliver the smoothest footage possible.

How It Works • Attach the Steadimate adapter to the handlebar of the motorized gimbal• Balance the Steadimate System• Connect your Arm and Vest• Enjoy the operating benefits! The Benefits • Take the load off the operator's arms for longer durations of operating without the fatigue• Effortless tilting via the pivot on the Steadimate• Increased stability & z-axis stabilization for the smoothest shot possible• Quick interchangeable use from handheld operation to Steadimate operation Compatibility • Motorized Gimbals with handlebars that are 25 mm, 25.5 mm or 30 mm in diameter• The Steadimate comes standard with a post block and balance pin that fit arms with 1/2" posts. Operators can purchase accessories that adapt the Steadimate to fit arms with 5/8" and 3/4" posts• The weight capacity for the Steadimate depends on the weight capacity of the motorized gimbal, arm, & vest being used. For operators who already own an arm & vest, the Steadimate can be purchased on its own. For operators in need of a complete kit, Tiffen offers Steadimate Systems in two weight classes