1126 products were found matching your search for Tester in 8 shops:

This 2-Piece Klein Tools GFCI Outlet Tester and Non-Contact Voltage Tester tool set is perfect for home inspections. Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlets, based on LED lights results. Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.

Mackie MTest-1 Cable TesterMTEST-1CABLE TESTERWhether you have a few or a mountain of cables, it pays to know which ones are good and which ones ne...

Rebelde by Rebelde for Men & Women Combo Pack: EDT Spray 5.1 oz. (3 x 1.7 oz. Bottles)-Tester NEW

Used. Very Good conditions. May have soft reading marks and name of the previous owner.

Klein Tools updated Electrical Test Kit contains MM300 (Manual-Ranging digital Multimeter), NCVT-1 (Non-Contact Voltage Tester) and the RT105 (Receptacle Tester). The NCVT-1 automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles. The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation. The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected. NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life. Receptacle tester detects wiring configurations and indicates correct wiring, open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects. Includes visual and audible continuity indicators up to 25. Includes test leads and batteries.

Become the ultimate troubleshooter for your audio setup with the MTest-1 Cable Tester from Mackie, a brand synonymous with high-quality audio equipment. This durable and efficient tool is essential for anyone looking to ensure the integrity of their audio cables, whether you're a professional sound engineer or an audio enthusiast.Crafted with a user-friendly interface, the MTest-1 Cable Tester offers immediate visual feedback through its bright, easy-to-read LED readout. This intuitive display clearly indicates the status of each pin, allowing you to quickly identify cables that are fully functional and those that need to be retired. Its versatility is unmatched, featuring male and female connectors compatible with all the most commonly used cable types, ensuring you can test everything in your arsenal with a single device.The MTest-1 is designed for convenience, accommodating any combination of connectors. Whether you're working with XLR to TRS or 1/8" to RCA, this intelligent device automatically matches pins to provide accurate testing results. For those instances where a unique connector is in play, the MTest-1 includes signal probes that enable you to test continuity on virtually any cable or non-active circuit.Mobility is a key feature of the MTest-1, which is battery-powered for on-the-go testing. Simply insert a 9V battery, and you're ready to assess your cables anywhere, anytime, without the need for an AC adapter. This makes the MTest-1 an ideal companion for live performances, studio sessions, and on-location shoots.The MTest-1 is not only reliable but also built to endure the rigors of frequent use. Its 'Built-Like-A-Tank' construction boasts a road-worthy, steel chassis and robust components that can withstand years of use. This resilience ensures that the MTest-1 will be a mainstay in your audio toolkit for the long haul.For those who value efficiency, reliability, and the assurance that comes from using a reputable brand, the MTest-1 Cable Tester is the definitive choice. It's more than just a cable tester; it's an investment in the quality and consistency of your audio productions.

The IDEAL 61-557 voltage continuity tester is a CAT IV 600-Volt rated auto ranging average root mean square (ARMS) digital meter that measures AC & DC voltage, low impedance AC voltage (Lo Z) (to reduce the possibility of false readings due to ghost voltages) & continuity, via test-leads. It detects the presence of voltage between 90-Volt to 600-Volt AC via a non-contact sensor in the top center of the meter and can perform a GFCI trip test via the probes and test button. The meter has an LCD display that can be backlit & a built-in flashlight that can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of meter and audible tones to notify when voltage is above 36-Volt AC 50-Volt DC, when continuity is detected and when the NCV senses voltage within its set range. The back of the meter has built-in 2 position dual probe holder, the lower position allows for probe storage, the higher position allows for and testing or measurement holding the meter and secured probe in 1 hand and the probe in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. This meter features a self-test at each power on, automatic AC DC voltage and DC polarity detection a low battery indication an auto power off function and comes with 3 AAA batteries.

VEVOR OBD2 Scanner Battery Tester 6V/12V - Upgrade 2 IN1 OBD Scanner Diagnostic Tool Car 100-2000 Battery Charging Cranking System Test Car Code Reader Scan Tool for All OBDII Protocol Cars Since 1996Plug and PlayWide Vehicle CompatibilityAdvanced Battery DetectionHigh-Definition TFT ScreenPortable and VersatileComplete Car DiagnosticsItem Model Number: KW681,Product Size: 5.8 x 3.3 x 0.9"

This tool set includes a Cable Tester (Cat. No. VDV501-851) and an 11-in-1 Multi-Bit Screwdriver (Cat. No. 32500). The Scout Pro 3 Tester Cable Tester Kit is a versatile cable tester that locates and tests voice, data and video cables. Identify multiple cable runs with included location mapping remotes. This kit verifies accurate cable installations each time. Backlit display assists in reading results in lower light. The versatile 11-in-1 multi-tool has everything the professional needs. The integrated screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for quick and easy switch out. The Cushion-Grip™ handle allows for greater torque and comfort.

The IP TESTER is a unique mobile service tool developed by Elation to test the integrity of any compatible IP-rated lighting fixture such as Elation's PROTEUS series fixtures, after being opened for lamp and gobo replacement or repair. Unlike other IP fixture test devices currently available in the market, Elation's IP TESTER has been designed to test for both Vacuum and Pressure leaks.Features include an easy to carry rugged flight case, an easy to navigate 6-button LCD control menu display, testing progress bars to indicate remaining test time, preloaded Elation IP-rated lighting fixture model test presets, manual test setup for any compatible non-Elation models, fixture serial number input to keep track of fixtures tested, Micro SD card slot to store test reports, and a USB connection for PC software control.The IP TESTER includes a 3-5 ft (0.9-1.5m) coiled air hose with quick-connect fitting, threaded M12 brass nozzle with push-to-connect fitting, 2 M12 x 1.5 nylon bolts, 6ft (1.8m) USB cable, 5ft (1.5m) IP65 Locking Power Cable, a Micro SD Card, and an easy to carry rugged case.

The NCVT2PKIT from Klein Tools includes a dual-range, non-contact voltage tester as well as a receptacle tester. The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The receptacle tester will troubleshoot standard 120-Volt AC grounded outlets.

This 2-Piece tool set includes a non-contact voltage tester and an AC/DC voltage / continuity tester. The NCVT-4IR is a voltage tester with an infrared thermometer. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. It also provides infrared (IR) thermometer measurements, making it the perfect choice for HVAC professionals. The ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions.

This 3-Piece Tool Set from Klein features the NCVT-3 Non-Contact Voltage Tester with Flashlight, the 6-in-1 Ratcheting Stubby Screwdriver with Square Recess Bits, and the 4-Vial ACCU-BEND Conduit Level. The voltage tester detects 12-Volt to 1,000-Volt AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires. It can also detect AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. The screwdriver is ergonomic with a Cushion-Grip™ handle and made to be interchangeable. Eliminate dog legs and make conduit bending easier with the help of Klein's ACCU-BEND™ Magnetic Level.

ADJ's Hydro IP Tester is a mobile service tool specifically designed to assess the integrity of compatible IP-rated lighting fixtures, including AD...

The NCVT-2 kit from Klein Tools includes a dual-range, non-contact voltage tester as well as a receptacle tester. The NCVT-2 automatically detects and indicates low voltage (12 - 48VAC) and standard voltage (48 - 1000VAC) allowing for broad application. The RT105 will troubleshoot standard 120-VAC grounded outlets. It features a low-battery indicator so that you know when it's time to re-power the device for maximum performance.

This tool set includes a Voltage / Continuity Tester (Cat. No. ET250) and a Heavy-Duty Wire Stripper (Cat. No. K12065CRSEN). Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions. The Wire Stripper / Cutter / Crimper Heavy-Duty Multi Tool is built with the durability of pliers, the sharpness and precision of a wire stripper and an integrated crimper. This American-made tool provides durable wire cutting, stripping, crimping and twisting plus bolt shearing in one tool. Four times (4X) stronger than traditional Klein wire strippers. This tool strips 8 to18 AWG solid and 10 to 20 AWG stranded wire and crimps 10 to 20 AWG stranded. Easily twists three wires at a time.

The Triplett LVPRO is an industry leading cable tester that runs a variety of cable testing procedures such as wiremap, timing tests (delay, skew), impedance measurement, Ethernet switch port blink, speaker pop, cable length, PoE volts, loaded battery test and 10/100/1000 indication, plus it gives you the ability to store and print up to 250 test reports. 3 models to choose from. Model LVPRO20 has 7 test apps and is Web upgradeable to Model LVPRO30 which has 13 test apps. Model LVPRO30SR adds Smart Remotes to Model LVPRO30. The LVPRO comes complete with Detachable Remote, F Male to BNC Male, F Male to BNC Female, (2) RJ45 patch cables, RJ45 to alligator clip adapter, USB cable, (4) AA batteries and carrying case. Models 30 and 30SR also include: 10 RJ45 remotes, 10 Coax remotes, and 3 RLQ adapters. In addition, Model 30SR includes Smart Remotes.

This tool set includes the Dual Range Non-Contact Voltage Tester with Flashlight, 12 - 1000-Volt AC (Cat. No. NCVT-3P) and the 4-in-1 Precision Electronics Screwdriver (Cat. No. 32581). The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site. Klein Tools electronics screwdrivers are designed for precision work, and feature a swivel cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision milled to fit screw openings securely. Rotating caps and Klein's exclusive Cushion-Grip handles offer outstanding comfort and control. Corrosion-resistant chrome plated barrel that includes two double-ended bits that exceed ANSI standards.

This 2-Piece tool set includes the Cat. No. NCVT5A Non-Contact Voltage Tester with Laser Pointer and the Cat. No. 32500 11-in-1 Multi-bit Screwdriver / Nut Driver. The voltage tester can be set to detect voltage from 70 to 1000V AC (Mode 1) or from 12 to 1000V AC (Mode 2) and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets, and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.

This 2-Piece Voltage Tester and Wire Stripper tool set includes the Dual Range Non-Contact Voltage Tester with Flashlight (Cat. No. NCVT3P) and the Solid and Stranded Copper Wire Stripper and Cutter (Cat. No. 11055). The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets, and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The wire strippers cut, strip and loop 10-18 AWG Solid and 12-20 AWG Stranded wire.