62 products were found matching your search for YPbPr in 3 shops:

Because you demand superior performance from your video equipment, the UVB1-CP-S Component Video (YPbPr) Active Balun Sender for SD / HDTV from Hall Research is designed to meet your needs. This innovative device is engineered to boost and extend a standard or HDTV Component Video (YPbPr) signal on Cat5 cable up to an impressive 1,000 ft. In a typical setup, two units are needed: one as a sender (UVB1-CP-S) and one as a receiver (UVB1-CP-R). The sender comes with a power supply that conveniently powers both ends, with the receiver drawing its power through the Cat5 cable. This efficient design sets it apart from other passive baluns on the market.What truly distinguishes this product is its active design, which uses wide bandwidth (450 MHz) differential (balanced) amplifiers to boost the signal, delivering an unprecedented sharp and clean image. This high-quality balun sender also provides Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity, effectively preventing 60 cycle video hum or distortion that can compromise your viewing experience.Unlike many competing baluns that offer no common mode rejection at low frequencies and are susceptible to facility grounding issues and noise pickup, this reliable device from Hall Research is immune to such problems. Its active design perfectly matches the impedance of the UTP cable at all frequencies, eliminating image ghosting, a common issue with passive baluns transmitting HD signals.In summary, the UVB1-CP-S Component Video (YPbPr) Active Balun Sender for SD / HDTV is a durable, efficient, and reliable choice for those who need to transmit video and audio signals over long distances without losing quality. Trust in the reputable brand of Hall Research for your professional audio and video equipment needs.

After extensive research and development, we present the UVB1-CP Component Video (YPbPr) Active Balun Extension Kit for SD / HDTV. This high-quality, durable kit is designed to boost and extend both standard and HDTV Component Video (YPbPr) signals over Cat5 cables for distances up to 1,000 ft. The kit is complete with a sender (UVB1-CP-S) and a receiver (UVB1-CP-R), along with top-tier cables for both ends. It also includes a single power supply that can be conveniently plugged into either end, ensuring user-friendly operation. What sets this product apart from other passive baluns is its active design. It boosts the signal using wide bandwidth (450 MHz) differential (balanced) amplifiers, delivering an unprecedented sharp and clean image. This efficient system provides Ground-loop Isolation (GLI) and RFI (radio frequency interference) immunity, effectively preventing 60 cycle video hum or distortion. Unlike many competing baluns, the UVB1-CP Component Video (YPbPr) Active Balun Extension Kit offers superior common mode rejection at low frequencies, ensuring it's not subject to facility grounding issues and noise pickup. Its active design perfectly matches the impedance of the UTP cable at all frequencies, eliminating the risk of image ghosting, a common issue with competing passive baluns transmitting HD signals. In essence, this reliable and efficient UVB1-CP Component Video (YPbPr) Active Balun Extension Kit is a versatile solution for extending your component video signals, compatible with a wide range of devices from SD to HDTV.

Experience the superior performance of the Lilliput 667, a 7" LED field monitor designed for professionals in the video and photography industry. With its high-resolution display of 800x480, this monitor delivers crystal clear images, making it an ideal companion for your Full HD video camera. The Lilliput 667 stands out with its high brightness level of 450cd/m2 and a high contrast ratio of 500:1, ensuring vibrant colors and rich details. Its LED backlit, matte display minimizes glare and reflection, providing an optimal viewing experience even under bright sunlight. To further enhance outdoor performance, the monitor comes with a detachable sun hood, ensuring a perfect picture both indoors and outdoors.This versatile field monitor supports HDMI and YPbPr input, allowing you to connect it with a Full HD video camera. It's designed to accept 50FPS and 60FPS signals, making it a reliable choice for CCTV monitoring and movie making. The Lilliput 667 is not just about performance, it's also about convenience. It comes with DV battery plates for power, offering a wide voltage range of 6-24V. This monitor also includes multiple mounting methods, allowing you to adjust viewing angles as per your requirements. Designed with portability in mind, the Lilliput 667 comes with a high-capacity rechargeable Li-ion battery, freeing you from the constraints of power cables. (Please note, the battery is not included). Whether you're a director needing a larger viewfinder or a cameraman looking for a high-quality sub-monitor, the Lilliput 667 is a cost-effective solution that doesn't compromise on quality. It comes with all the necessary accessories, including a shoe mount adapter, sun hood, HDMI cable, and remote control, providing you with great value.The Lilliput 667 is compatible with most DSLR cameras supporting HDMI output, making it a versatile addition to your professional gear. With its high contrast ratio and enhanced brightness, this field monitor is designed to meet the demands of professional camera crews and photographers who require accurate color representation. No matter what camera or AV equipment you use, the Lilliput 667 has a video input to suit all applications. It even includes a shoe mount adapter and standard Whitworth threads for easy mounting on a tripod or camera rig. Experience the difference with the Lilliput 667, a field monitor that combines performance, versatility, and convenience.

Where high-quality imaging meets portability, the Lilliput 569 5" Camera-Top LED Field Monitor stands out. This compact, lightweight monitor is designed with a 16:9 LED field and HDMI input, making it an ideal companion for DSLR cameras. With a high resolution of 800x480, this monitor delivers sharp, detailed images, enhancing your photography and videography experience.The Lilliput 569 is not just a monitor; it's a versatile tool for DSLR users. Its high contrast ratio of 600:1, thanks to the improved LED backlight technology, ensures that what you see on the monitor is what you get in post-production. The enhanced brightness of 400 cd/m2, coupled with the included sun hood, ensures a vivid and crystal clear picture even under sunlight, making it a great outdoor performer.This 5" monitor is designed with wide viewing angles of up to 150 degrees, allowing you to get the same vivid picture from various standing positions. It's not just about the visuals; the Lilliput 569 also offers versatility in power options. It comes with two battery plates compatible with F970, LP-E6, DU21, and QM91D batteries. For extended use, Lilliput can supply an external battery that provides up to 6 hours of continuous use, making it perfect for mounting on a DSLR rig.The Lilliput 569 is equipped with HDMI, component, and composite through BNC connectors, ensuring compatibility with a wide range of cameras and AV equipment. Whether you're using a DSLR camera with an HDMI output or a larger production camera with HD component and regular composite through BNC connectors, the Lilliput 569 has a video input to suit all applications. In a nutshell, the Lilliput 569 5" Camera-Top LED Field Monitor is a durable, easy-to-use, and versatile tool that enhances your camera or camcorder's capabilities, delivering high-quality images on a portable platform.

The Lilliput 667/S is a 7 inch 16:9 LED field monitor with HDMI, 3G SDI, component and composite video inputs.• Specific LCD Monitor by LILLIPUT Uses for Full HD Video Camera Seizing much more clear world• Application for Full HD Video Camera in CCTV Monitoring and Making Movies• 3G-SDI, HDMI & YPbPr Input, to connect with Full HD Video Camera• To connect with Full HD Video Camera, as sub-monitor when CCTV Monitoring or Making Movies• High Brightness/Contrast & Dizzy-proof monitor with sun shade, to see clearly under sunshine• Multi mounting methods to view under different angles• High capacity rechargeable Li-ion battery, make power cables free (Battery isn't included )• The model accepts 50FPS and 60FPS signal only 7 inch monitor with wide screen aspect ratio Whether you're shooting still or video with your DSLR, sometimes you need a bigger screen than the tiny monitor built into your camera. The 7 inch screen gives directors and camera men a larger view finder and the 16:9 aspect ratio complements HD resolutions. Designed for the pro video market Cameras, lenses, tripods and lights are all expensive - but your field monitor doesn't have to be. Lilliput are famous for manufacturing durable and high quality hardware, at a fraction of the cost of competitors. With the majority of DSLR cameras supporting HDMI output, it is likely your camera is compatible with the 667/S. The 667/S is supplied with all the accessories you need - shoe mount adapter, sun hood, HDMI cable and remote control, saving you a great deal in accessories alone. High contrast ratio Professional camera crews and photographers require accurate color representation on their field monitor and the 667/S provides just that. The LED backlit, matte display has a 500:1 color contrast ratio so colors are rich and vibrant and the matte display prevents any unnecessary glare or reflection. Enhanced brightness, great outdoor performance The 667/S is Lilliput's brightest monitor. The enhanced 450 cd/m2 backlight produces a crystal clear picture and shows colors vividly. Importantly, the enhanced brightness prevents the video content from looking 'washed out' when the monitor is used under sun light. The addition of the inclusive sun hood (supplied with all 667/S units, also detachable), the Lilliput 667/S ensures a perfect picture both indoors and outdoors. Battery plates included The key difference between the 667/S and the 668 is the battery solution. Whereas the 668GL includes an internal battery, the 667/S includes battery plates which are compatible with F970, QM91D, LP-E6 and DU21 batteries. 3G-SDI, HDMI and component and composite through BNC connectors No matter which camera or AV equipment our customers use with the 667/S, there is a video input to suit all applications. Most DSLR & Full HD Camcorder ship with an HDMI output, but larger production cameras output HD component and regular composite through BNC connectors. Shoe mount...

A professional's choice for on-the-go monitoring, the Lilliput 668GL-70NP/H/Y is a robust 7-inch LED field monitor that offers a high-resolution display of 800x480, ensuring that every detail is captured with clarity. This durable and high-quality monitor is designed to be the perfect companion for directors and camera operators who demand a larger, more vivid viewfinder than what is typically available on camera screens.With a widescreen 16:9 aspect ratio, this monitor is tailored to complement HD video production, providing a broad canvas for accurate framing and composition. Its versatility is further enhanced by its multiple input options, including HDMI for digital sources and YPbPr for analog signals, making it a reliable choice for a wide array of cameras and video equipment.The Lilliput 668GL-70NP/H/Y stands out in the field with its high contrast ratio of 500:1, delivering rich, vibrant colors and deep blacks. The LED-backlit, matte display minimizes glare and reflections, which is essential for outdoor shoots and challenging lighting conditions. With a luminance of 450 cd/m, the monitor remains clear and visible even in bright sunlight, and the included sunhood offers additional screen visibility and protection.Viewing angles are generous, with the display offering 130 degrees of horizontal and 120 degrees of vertical visibility, ensuring that multiple crew members can simultaneously view the content without compromise. This feature is particularly useful in collaborative settings where clear communication and shared vision are key.Portability is a significant advantage of the 668GL-70NP/H/Y, thanks to its built-in rechargeable battery that provides approximately 2-3 hours of continuous use, making it an ideal solution for fieldwork. The monitor comes with a shoe mount adapter, enabling easy mounting on a tripod or camera without incurring extra costs for additional accessories.The Lilliput 668GL-70NP/H/Y is not just a monitor; it is a comprehensive monitoring solution that includes essential accessories such as a shoe mount adapter, sunhood, HDMI cable, and remote control, saving professionals from the hassle and expense of aftermarket purchases.In summary, the Lilliput 668GL-70NP/H/Y 7" LED Field Monitor is a portable, versatile, and reliable choice for professionals seeking a high-quality viewing experience in the field. Its compatibility with a range of video inputs and its ability to deliver a bright, accurate image make it an exceptional value for any video production toolkit.

LZX-standard conversion from component YPbPr (or monochrome composite) to YRGB with rear RCA sync. Not LZX product.

Upgrade your gaming experience with our Component to HDMI Converter, complete with an HDMI cable. Effortlessly convert 5 RCA YPbPr signals to HDMI, supporting crisp 1080p at 60Hz for PS2, PS3 and Xbox 360. Enjoy seamless, high-definition gameplay with this easy-to-use adapter.

Make your photography and videography experience more immersive with the Lilliput 667GL-70NP/H/Y, a 7" Camera-Top LED Monitor. This high-quality field monitor offers a widescreen LCD display with HDMI, component, and composite video inputs, providing a larger, clearer viewfinder for directors and cameramen. The 7" screen, with its 16:9 aspect ratio, is designed to complement HD resolutions, providing an enhanced viewing experience. This makes the Lilliput 667GL-70NP/H/Y an ideal addition to any DSLR camera setup, most of which support HDMI output. Despite being designed for the professional video market, this monitor is priced affordably, offering high-quality hardware without the hefty price tag of more well-known brands. It comes with a variety of accessories, including a shoe mount adapter, sunhood, HDMI cable, and remote control, eliminating the need for additional aftermarket purchases.The LED backlit display boasts a 500:1 color contrast ratio, ensuring rich, vibrant colors and accurate color representation. The matte surface prevents glare or reflection, making it ideal for outdoor work. With a high brightness level of 450 cd/m2, the monitor produces a clear, bright picture, even under sunlight. The included sunhood further enhances clarity in bright conditions.The Lilliput 667GL-70NP/H/Y offers wide viewing angles, remaining perfectly viewable up to 130 degrees horizontally and 120 degrees vertically from the center point. This is particularly useful when multiple people need to view content on a single monitor.Unlike the 668 model, the 667 includes two battery plates compatible with Sony NP-F970 and Canon LP-E6 batteries. It also features a variety of video inputs to suit all applications, including HDMI, component, and composite through BNC connectors. This versatile monitor also includes a shoe mount adapter, saving you the additional cost of purchasing a separate unit. With 2 1/4" BS Whitworth thread inserts, the monitor can be quickly mounted on either a tripod or camera. Whether you're a professional videographer or a passionate photographer, the Lilliput 667GL-70NP/H/Y 7" Camera-Top LED Monitor is a valuable addition to your equipment arsenal.

Component (YPbPr) to HD15 cable for the MT Hood family of Extenders • Component (YPbPr) video, left and right audio input • 28" (70cm) long

HD15 to YPbPr cable for the MT Hood family of Receivers • Component YPbPr, left and right audio output • 70" (180cm) long

Take your video presentations to the next level with the sleek and advanced ET-YFB200G Digital Link Switcher from Panasonic. This compact and durable device is designed to seamlessly switch between multiple video sources, including HDMI, VGA, and YPbPr analog, and display them on a single screen. With two DIGITAL LINK terminals based on HDBaseT technology, this user-friendly switcher outputs uncompressed HD digital video, audio, and command signals to two projectors or displays. It boasts long-distance DIGITAL LINK transmission capabilities of up to 150 meters (492 feet) through a single CAT 5e (STP) or higher cable. The ET-YFB200G Digital Link Switcher also offers daisy-chain (cascade) connection capability for distribution to multiple display devices. It comes equipped with abundant input terminals, including two HDMI inputs, an RGB input, and three audio inputs. A separate audio output is also included, providing audio playback even when the projector is powered down.Easy operation and installation are key features of this device. It includes a DVI-D output for connecting an extra projector or display, or for monitoring outgoing signals on a connected PC. The switcher can be remotely controlled from a PC or tablet using a handy in-browser feature. It also supports Early Warning Software, which allows for the anticipation or easy identification of failures.The ET-YFB200G Digital Link Switcher is compatible with other manufacturer's equipment based on the same technology and comes with brackets for server rack (EIA standards) mounting. Experience high-fidelity digital signal transmission with this device. Digital transmission ensures lossless image and sound quality over long distances. The Digital Cinema Reality feature converts interlaced motion image signals into beautifully smooth progressive images. The switcher also includes a No Signal Sleep Mode, which automatically shuts down the DIGITAL LINK output when no input signal is detected, saving power. It automatically resizes PC signals and outputs them at the optimal resolution to suit the projector's panel resolution. The Auto Setup function automatically distinguishes input signal and adjusts to output at the optimal viewing angle. Support for 3D video format transmission (Pass Through Mode only) and closed caption compatibility round out the impressive features of the ET-YFB200G Digital Link Switcher, making it an ideal choice for projectors, home theaters, and other applications where multiple video sources need to be switched and displayed on a single screen.

Take your video presentations to the next level with the sleek and advanced ET-YFB200G Digital Link Switcher from Panasonic. This compact and durable device is designed to seamlessly switch between multiple video sources, including HDMI, VGA, and YPbPr analog, and display them on a single screen. With two DIGITAL LINK terminals based on HDBaseT technology, this user-friendly switcher outputs uncompressed HD digital video, audio, and command signals to two projectors or displays. It boasts long-distance DIGITAL LINK transmission capabilities of up to 150 meters (492 feet) through a single CAT 5e (STP) or higher cable. The ET-YFB200G Digital Link Switcher also offers daisy-chain (cascade) connection capability for distribution to multiple display devices. It comes equipped with abundant input terminals, including two HDMI inputs, an RGB input, and three audio inputs. A separate audio output is also included, providing audio playback even when the projector is powered down.Easy operation and installation are key features of this device. It includes a DVI-D output for connecting an extra projector or display, or for monitoring outgoing signals on a connected PC. The switcher can be remotely controlled from a PC or tablet using a handy in-browser feature. It also supports Early Warning Software, which allows for the anticipation or easy identification of failures.The ET-YFB200G Digital Link Switcher is compatible with other manufacturer's equipment based on the same technology and comes with brackets for server rack (EIA standards) mounting. Experience high-fidelity digital signal transmission with this device. Digital transmission ensures lossless image and sound quality over long distances. The Digital Cinema Reality feature converts interlaced motion image signals into beautifully smooth progressive images. The switcher also includes a No Signal Sleep Mode, which automatically shuts down the DIGITAL LINK output when no input signal is detected, saving power. It automatically resizes PC signals and outputs them at the optimal resolution to suit the projector's panel resolution. The Auto Setup function automatically distinguishes input signal and adjusts to output at the optimal viewing angle. Support for 3D video format transmission (Pass Through Mode only) and closed caption compatibility round out the impressive features of the ET-YFB200G Digital Link Switcher, making it an ideal choice for projectors, home theaters, and other applications where multiple video sources need to be switched and displayed on a single screen.

The Muxlab Component Video Hub is a robust and high-quality solution for distributing a full component video (YPbPr/RGB) source along with a digital or analog audio video source to multiple destinations. Designed for versatility and efficiency, this hub supports up to sixteen (16) ports, making it an ideal choice for those who require a comprehensive and reliable network connection for a multitude of devices.Crafted with durability in mind, the 500252 model ensures a more cost-efficient cabling system by allowing seamless distribution to either eight (8) or sixteen (16) locations, depending on the model selected. This makes it a perfect fit for environments such as offices, homes, and small businesses that demand high-speed Ethernet network connections for devices like computers, printers, and other network-enabled equipment.The Component Video Hub boasts 16 Gigabit Ethernet ports, each capable of supporting speeds of up to 10 Gbps, ensuring that your network's performance is maximized for efficiency and speed. Compatibility with a wide range of operating systems, including Windows, MacOS, and Linux, adds to the hub's versatility, making it a universally adaptable solution for various setups.Ease of use is at the forefront of the design, with the hub engineered to be user-friendly, allowing for quick and straightforward setup. This is particularly beneficial for users with limited technical knowledge who need a reliable network without the complexity of a difficult installation process.In summary, the Muxlab Component Video Hub stands out as a durable, high-quality, and efficient networking solution that offers reliable performance and versatility for connecting multiple devices within a network. Whether for professional or personal use, this hub is engineered to meet the demands of any setting requiring a robust component video and audio distribution network.

The 5x1 HDMI / HDBT Presentation switch is a compact scaler switcher with5 video inputs (3 HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA with audio switched following the video; 1 MIC audio input). The VGA input supports VGA, Component Video (YPbPr) and Composite Video.The 5x1 HDMI / HDBT Presentation switch scales & switches any video signal to HDMI output and HDBaseT output for a transmission over up to 70 m of Cat5e/6 with PoC support.With 1 IR Sensor, 5 IR Emitters and 1 RS232 port, bidirectional IR & RS232 signals can be transmitted simultaneously between the 5x1 HDMI / HDBT Presentation switch and the HDMI Extender PoC/PoE Receiver.Applications:Computer realm, monitoring, conference room and conference centers, corporate boardrooms, hotels and hospitality rooms, big screen displaying, television education, command & control centers and smart homes.

When seeking a reliable and efficient solution for high-definition video distribution, look no further than our Component Video Hub. This high-quality, durable device is designed to handle full component video (YPbPr/RGB) sources, as well as digital or analog audio video sources. With its 8-port capacity, this hub allows for the seamless distribution of your video and audio signals to up to eight different destinations. Engineered for user-friendly operation, this Component Video Hub is perfect for connecting a diverse range of video sources, including computers, cameras, and gaming consoles. Its 110V power supply ensures steady and uninterrupted performance, making it an ideal choice for both professional and personal use. Whether you're setting up a multi-monitor display for gaming, broadcasting live video feeds, or simply connecting multiple devices to your home entertainment system, this Component Video Hub offers the flexibility and efficiency you need. Its ability to support 1080p resolution means you can enjoy high-definition video signals on multiple displays, such as monitors, TVs, or projectors. Experience the convenience of cost-efficient cabling with our 8-port Component Video Hub, designed to deliver superior video quality and performance. Please note that the number of destinations may vary depending on the model, with the 500250 model supporting up to eight ports.

A comprehensive solution for your audio-visual needs, the DXP-62 Presentation Scaler/Switcher Kit is expertly designed for advanced multi-signal processing. This versatile device seamlessly handles HDMI, VGA, Component (YPbPr), and Composite inputs, scaling all to a high-definition resolution output of up to 1900x1200. The DXP-62 is equipped to accept up to four HDMI inputs and two VGA/YPbPr/Composite inputs, scaling all to the integrated HDMI and HDBaseT simultaneous outputs. This ensures a high-quality, consistent display across all your devices. One of the standout features of this presentation scaler/switcher kit is its One Room - One Cable functionality. This feature allows the HDBaseT output to pass PoH power to the included HDBaseT Receiver, as well as RS232 and IR control for the display. This simplifies setup and reduces cable clutter, making it an ideal choice for streamlined, efficient operations.In addition to its video capabilities, the DXP-62 also boasts superior audio features. It comes with four external audio inputs, an additional MIC input with independent volume control, and a de-embedding line level stereo output. This ensures clear, high-quality audio to match your high-definition visuals.With its auto sensing/switching video inputs, the DXP-62 is a versatile solution, perfect for various applications such as classrooms, conference rooms, and AV cart applications. To ensure easy installation, the kit also includes 1RU rack-mount hardware. In essence, the DXP-62 Presentation Scaler/Switcher Kit is a robust, all-in-one solution for your audio-visual presentation needs, offering superior performance, versatility, and ease of use.

Become the master of your presentations with the DXP-62 Presentation Switcher/Scaler, a versatile and high-performance device designed for seamless multi-signal processing. This advanced switcher/scaler is capable of handling a variety of inputs including HDMI, VGA, Component (YPbPr), and Composite, scaling all to a high-definition resolution output of up to 1900x1200. The DXP-62 is equipped to accept up to four HDMI inputs and two VGA/YPbPr/Composite inputs, all of which can be scaled to the on-board HDMI and HDBaseT simultaneous outputs. This ensures a high-quality, consistent display across all your devices. One of the standout features of the DXP-62 is its integrated HDBaseT output. This innovative feature allows for the transmission of uncompressed high-definition video, audio, power, and control signals over a single cable. With the ability to pass PoH power to the included HDBaseT Receiver, as well as RS232 and IR control for the display, this presentation switcher/scaler simplifies your setup and reduces cable clutter. But the DXP-62 doesn't stop at video. It also offers superior audio capabilities with four external audio inputs, an additional MIC input with independent volume control, and a de-embedding line level stereo output. This ensures your audio matches the quality of your visuals, providing a complete multimedia experience. With its auto sensing/switching video inputs, the DXP-62 is an ideal solution for a variety of settings, including classrooms, conference rooms, and AV cart applications. The device also comes with 1RU rack-mount hardware included, making installation a breeze. In summary, the DXP-62 Presentation Switcher/Scaler with Integrated HDBaseT Output is a comprehensive solution for all your presentation needs, delivering high-quality audio and video performance in a user-friendly package.

Become the master of your presentations with the DXP-62 Presentation Switcher/Scaler, a versatile and high-performance device designed for seamless multi-signal processing. This advanced switcher/scaler is capable of handling a variety of inputs including HDMI, VGA, Component (YPbPr), and Composite, scaling all to a high-definition resolution output of up to 1900x1200. The DXP-62 is equipped to accept up to four HDMI inputs and two VGA/YPbPr/Composite inputs, all of which can be scaled to the on-board HDMI and HDBaseT simultaneous outputs. This ensures a high-quality, consistent display across all your devices. One of the standout features of the DXP-62 is its integrated HDBaseT output. This innovative feature allows for the transmission of uncompressed high-definition video, audio, power, and control signals over a single cable. With the ability to pass PoH power to the included HDBaseT Receiver, as well as RS232 and IR control for the display, this presentation switcher/scaler simplifies your setup and reduces cable clutter. But the DXP-62 doesn't stop at video. It also offers superior audio capabilities with four external audio inputs, an additional MIC input with independent volume control, and a de-embedding line level stereo output. This ensures your audio matches the quality of your visuals, providing a complete multimedia experience. With its auto sensing/switching video inputs, the DXP-62 is an ideal solution for a variety of settings, including classrooms, conference rooms, and AV cart applications. The device also comes with 1RU rack-mount hardware included, making installation a breeze. In summary, the DXP-62 Presentation Switcher/Scaler with Integrated HDBaseT Output is a comprehensive solution for all your presentation needs, delivering high-quality audio and video performance in a user-friendly package.

The DXP-62 is a presentation scaler/switcher designed for multi-signal processing of HDMI, VGA, Component (YPbPr) and Composite inputs scaling all up to 1900x1200 HD resolution output. It accepts up to four (4) HDMI inputs and two (2) VGA/YPbPr/Composite inputs and scales all to the on-board HDMI and HDBaseT simultaneous outputs. Leveraging One Room - One Cable features, the HDBaseT output will pass PoH power to the included HDBaseT Receiver as well as RS232 and IR control for the display. With the addition of four (4) external audio inputs, additional MIC input with independent volume control, de-embedding line level stereo output and auto sensing/switching video inputs, the DXP-62 is perfect for Classrooms, Conference Rooms and AV Cart applications. 1RU rack-mount hardware included.