165 products were found matching your search for fakro in 1 shops:

The Fakro DWT Knee Wall Access Door provides convenient access to unused space behind low partition walls while delivering excellent thermal insulation with an R-value of 9.5. Its thick, thermally insulated door panel (2-5/8 in.) is designed to reduce heat loss, making it ideal for energy-efficient homes, The door comes fully assembled and can be installed to swing left or right, offering flexibility, A perimeter rubber seal ensures a tight, secure fit to maintain air and thermal integrity. Material: Wood.

The Fakro LST Scissor Attic Ladder is engineered for space efficiency and durable functionality. Made of durable, powder-coated steel, the ladder features a well-balanced scissor mechanism that requires minimal room for operation. With a 350 lbs load capacity, it provides a safe and sturdy climb. The white, insulated door is sealed with a weather seal gasket to help minimize heat loss, aligning with an R-value of 5.2. The ladder fits ceiling heights ranging from 7'6½" to 9'2¼". Installation brackets for easy setup and a metal rod for hatch opening and ladder deployment are included. The ladder also comes with a white metal trim for an elegant finish.

The Fakro LST Scissor Attic Ladder is engineered for space efficiency and durable functionality. Made of durable, powder-coated steel, the ladder features a well-balanced scissor mechanism that requires minimal room for operation. With a 350 lbs load capacity, it provides a safe and sturdy climb. The white, insulated door is sealed with a weather seal gasket to help minimize heat loss, aligning with an R-value of 5.2. The ladder fits ceiling heights ranging from 7'6½" to 9'2¼". Installation brackets for easy setup and a metal rod for hatch opening and ladder deployment are included. The ladder also comes with a white metal trim for an elegant finish.

LWF 8 ft. - 10 ft. 1 in., 22.5 in. x 54 in. is a fire-rated attic ladder that provides easy access to the attic while functioning as a blaze block in case of fire. The hatch is manufactured with the use of fire-proof materials and is equipped with a gasket that expands under extreme heat. The LWF ladder is fire-rated at 30 minutes in accordance with NFPA 288 and 43 minutes in accordance with ASTM E119. Material: Wood.

The LML 27.5 in. x 47 in. model is a metal, three-section, folding attic ladder designed to ensure the highest comfort of use. Its steps measure 5 1/8 in. x 13 3/4 in. The installation process is simplified with an easy adjustment of the ladder's length to fit the ceiling height. It features an unloading mechanism concealed within the handrail, aiding in both folding and unfolding the ladder. Material: Steel.

EH-C flashing kit is suitable for curb mounted Fakro skylights. Flashing is essential for the correct installation of skylights. Precisely designed flashing details ensure a durable and neat fit with the used roofing material. Flashing is manufactured using aluminum as standard, permanently protected with a polyester varnish.

LMF 8 ft. - 10 ft. 1 in., 30 in. x 54 in. is a fire-rated attic ladder that provides easy access to the attic while functioning as a blaze block in case of fire. The hatch is manufactured with the use of fire-proof materials and is equipped with a gasket that expands under extreme heat. The LMF ladder is fire-rated at 60 minutes in accordance with NFPA 288 and ASTM E119. Material: Steel.

Get to your attic with this Fakro LSF Fire Rated Insulated Steel Scissor Attic Ladder. Fire-rated at 60 minutes, it works as a fire block that prevents smoke from reaching the attic. For more fire safety, it comes with a gasket that expands under extreme heat. This ladder includes a nearly invisible integrated locking latch and a metal opening and closing rod. You can adjust it by adding or removing steps.

Fakro FV Manual Venting skylights are an economical solution to add natural light and fresh air into a home. The thick wooden frame and Low-E glazing allows your homes efficiency to increase and save energy. The FV Manual Venting skylights are recommended for installations in fairly easy to reach locations where it can be opened with the provided crank or SZS Control Rod (sold separately).

The Fakro LXN box extension is made of pine wood to match the frame of the attic ladder. It extends the attic ladder's frame for a finished look inside the ceiling opening. It is required with the LST when installing the LXW-B upper hatch.

The newly developed curb mounted fixed skylight incorporates simple installation, long trouble-free use and the beauty of a modern design. Following world design trends of electronic devices, Fakro has developed curb mounted skylight with completely (smartphone like) flat surface, allowing installation on any type of roofs in any direction you wish. Bringing natural light into a home through a skylight decreases the need for electricity while maintaining privacy.

EH Flashing Kit is designed for Fakro deck mount skylights FX, FV, FVE and FVS models. It is required to complete skylights installation and assure proper water drainage around the skylight. New universal size makes it suitable for multiple skylights sizes with the same width (see below).

FAKRO FWU Egress windows will not only light up a room but they will also provide an easy access to the roof or way of escape in case of emergency. FAKRO Egress windows are available in two versions; right-opening, FWU-R and left-opening, FWU-L . This window requires special flashings; ELW and EHW are available for purchase separately. FAKRO flashing kits, ELW and EHW are required to be eligible for FAKROs 10 year leak-proof warranty.

FAKRO FWU Egress windows will not only light up a room but they will also provide an easy access to the roof or way of escape in case of emergency. FAKRO Egress windows are available in two versions; right-opening, FWU-R and left-opening, FWU-L . This window requires special flashings; ELW and EHW are available for purchase separately. FAKRO flashing kits, ELW and EHW are required to be eligible for FAKROs 10 year leak-proof warranty.

EL Flashing Kit is designed for Fakro deck mount skylights FX, FV, FVE and FVS models. It is required to complete skylights installation and assure proper water drainage around the skylight. New universal size makes it suitable for multiple skylights sizes with the same width (see below).

The EL-D Flashing Kit is specifically designed for Fakro deck-mounted skylights, compatible with PDX and PDS models. It is essential for installing skylights on roofs with a pitch above 15° ensuring proper water drainage around the skylight. The new universal size allows it to fit multiple skylight sizes with the same width (details below).

The newly developed curb mounted fixed skylight incorporates simple installation, long trouble-free use and the beauty of a modern design. Following world design trends of electronic devices, Fakro has developed curb mounted skylight with completely (smartphone like) flat surface, allowing installation on any type of roofs in any direction you wish. Bringing natural light into a home through a skylight decreases the need for electricity while maintaining privacy.

Main purpose of the Fakro FX skylight is to take advantage of natural light. This provides a sense of security and fills the room with positive energy. The thick wooden frame and low-E glazing allows your homes efficiency to increase and save energy.

The PDX skylight meets contemporary design and technological standards, suitable for both residential and commercial buildings. Main feature includes advanced three-layer glass technology, designed to enhance thermal efficiency. This contributes to reduced energy expenditures and optimized indoor climate control. Additionally, the 3-layer glass improves acoustic insulation and elevates safety standards, making it a fitting choice for modern residential and commercial environments.

The EL-C flashing kit is suitable for curb-mounted Fakro skylights and is designed for use on roof slopes between 15 and 60 degrees. Flashing is essential for the correct installation of skylights within this pitch range, ensuring a durable and neat fit with the roofing material. Flashing is manufactured using aluminum as standard, permanently protected with a polyester varnish.