13 products were found matching your search for flamex in 1 shops:

Be prepared and ensure the safety of your stage, set, or event with the Flamex DF Flame Retardant for Natural Fiber Fabrics. This high-quality flame retardant solution is specifically designed for natural fiber fabrics, making it an essential tool for treating materials commonly used in scenery, costumes, and props. The Flamex DF Flame Retardant is ideal for a wide range of natural fabrics including cotton, muslin, scrims, cotton netting, natural velours, wools, linens, and natural felts. It's also suitable for most decorative, garment, or upholstery fabrics made from natural fibers. This versatility makes it a go-to solution for professionals in the theater, event, and interior design industries.Easy to apply, this flame retardant leaves no greasy residue, ensuring your fabrics maintain their natural feel and appearance. The Flamex DF Flame Retardant comes premixed, eliminating the need for further dilution and making it ready to use right out of the container. Application methods vary depending on the fabric, but the most efficient method is immersion. Simply submerge the fabric completely for ten minutes and hang to dry. Alternatively, you can brush the solution into the fibers using a wide lay-in brush in a criss-cross pattern, or spray it on with a medium-nozzle Hudson-type sprayer. One gallon of Flamex DF Flame Retardant can treat approximately 500 square feet (46.4 square meters) of fabric, providing excellent coverage and value. This product has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards, providing peace of mind and assurance of its effectiveness. When storing Flamex products, it's recommended to use non-metallic containers and thoroughly clean metal sprayers immediately after use to maintain their condition. Please note, it's essential to read the instructions supplied with the Flamex DF Flame Retardant carefully and always test a sample of your fabric to determine its reaction and effective flame retardance. Choose Flamex DF Flame Retardant for Natural Fiber Fabrics for a reliable, effective, and easy-to-use solution to meet your fire safety needs.

Because safety is paramount in any setting, the Flamex DF Flame Retardant for Delicate Fabrics, a 5-gallon (18.95 liters) solution, is expertly designed to provide effective flame resistance without compromising the softness and drape of your delicate materials. This product is ideal for treating fabrics used in scenery and costumes, which often present a challenge due to their delicate nature. Roscoflamex DF, the key ingredient in this solution, ensures the preservation of the fabric's soft qualities while delivering a robust flame treatment. This flame retardant solution is compatible with most natural or synthetic fiber fabrics, making it a versatile choice for a wide range of applications.The Flamex DF Flame Retardant comes premixed, eliminating the need for further dilution. However, the application method and the amount required for effective treatment may vary depending on the fabric in use. One gallon of this flame retardant solution can treat approximately 500 square feet (46.4 square meters) of fabric. The product can be applied by dipping, brushing, or spraying. Dipping is the most efficient method, requiring a ten-minute immersion followed by air drying. Brushing involves using a wide lay-in brush to ensure adequate absorption into the fabric fibers. For spray application, a Hudson-type sprayer with a medium nozzle setting is recommended to ensure optimal coverage.Roscoflamex DF has earned approval from the California and New York City Fire Marshall and has been tested according to NFPA 701 standards. For storage, it is recommended to keep Flamex products in non-metallic containers and clean any metal sprayers immediately after use.This flame retardant solution is ideal for treating a variety of delicate fabrics including sheers, silks, organza, chiffon, lace, and gauze. However, it is always recommended to treat a test sample first to determine the fabric's reaction and to test for effective flame retardance. Please note, Roscoflamex DF is a new formulation designed to enhance performance on delicate and sensitive materials. It is advised not to intermix old and new Flamex products. Always read the instructions supplied with any Flamex product carefully before use.

Take your safety measures to the next level with the Flamex DF Flame Retardant, specifically designed for delicate fabrics. This product, ideal for both scenery and costume materials, ensures an effective flame resistance without compromising the softness or drape of your fabrics. Roscoflamex DF, a gentle yet powerful solution, is compatible with most natural or synthetic fiber fabrics. It has been meticulously premixed, eliminating the need for any further dilution. The application method and the quantity of Roscoflamex DF required may vary depending on the type of fabric being treated. One gallon of this flame retardant can treat approximately 500 square feet (46.4 square meters) of fabric. There are several methods of application, including dipping, brushing, and spraying. Dipping is the most efficient method, requiring the fabric to be completely immersed for ten minutes before being hung to dry. Brushing involves using a wide lay-in brush to work the Flamex solution into the fabric fibers, ensuring adequate absorption. Spraying requires careful calculation of the solution needed, as a significant portion may not fall on the fabric. Roscoflamex DF has received approval from the California and New York City Fire Marshalls and has been tested according to NFPA 701 standards. It is recommended to store Flamex products in non-metallic containers and clean any metal sprayers immediately after use. This flame retardant is ideal for treating a variety of delicate fabrics including sheers, silks, organza, chiffon, lace, and gauze. However, it is always recommended to treat a test sample first to determine the fabric's reaction and to test for effective flame retardance. Please note, Roscoflamex DF is a new formulation designed to enhance performance on delicate and sensitive materials. It is advised not to mix old and new Flamex products. Always read the instructions supplied with any Flamex product carefully. Rosco offers these products in good faith, but without guarantee, as the materials treated and methods of application are beyond the manufacturer's control.

Where safety and effectiveness meet, you'll find the Rosco Flamex SF Flame Retardant for Synthetic Fiber Fabrics. This high-quality, easy-to-use solution is specifically engineered to treat a wide array of synthetic fabrics, including polyesters, nylons, acrylics, and rayons, as well as most cotton/synthetic blends. Unlike other flame retardants, Rosco Flamex SF is designed to penetrate deeply, bonding to the surface of the synthetic threads within the fabric weave. This unique formulation ensures the flame retardant chemicals are securely attached, providing durable and reliable flame-resistant protection. Ideal for use in scenery properties and costume construction, Rosco Flamex SF is a trusted choice for professionals seeking to meet Fire Marshall's expectations. It leaves no residue or powdery build-up, maintaining the integrity of your fabrics while enhancing their safety. Application of Rosco Flamex SF is straightforward and efficient. It comes premixed and ready to use, with no further dilution required. It can be applied by dipping, brushing, or spraying, depending on your specific needs. One gallon of this effective flame retardant can treat approximately 500 square feet (46.4 square meters) of fabric, making it a cost-effective solution for large-scale projects. Rosco Flamex SF has been rigorously tested and approved for use by the California and New York City Fire Marshall, and meets NFPA 701 standards. For storage, it's recommended to keep Flamex products in non-metallic containers to maintain their effectiveness. As with all Flamex products, it's important to read the instructions carefully and always test a sample for compatibility and effectiveness before treating the entire material. With Rosco Flamex SF, you can trust in a product that delivers superior flame retardant protection for your synthetic fiber fabrics.

Why settle for less when it comes to fire safety? The Flamex DF Flame Retardant for Natural Fiber Fabrics, a 5-gallon (18.95 liters) solution, is your trusted ally in ensuring your scenery, props, and costumes meet local fire regulations. This product is specifically designed for fabrics made of natural fibers, making it an ideal choice for treating cotton, muslin, scrims, cotton netting, natural velours, wools, linens, natural felts, and a wide range of decorative, garment, or upholstery fabrics.The Flamex DF Flame Retardant is a product of Rosco, a trusted name in the industry. It's premixed and ready to use, eliminating the need for further dilution. The application method and the amount required may vary depending on the fabric, but rest assured, this solution is easy to use and leaves no greasy residue.One gallon of this flame retardant can treat approximately 500 square feet (46.4 square meters) of fabric. It can be applied through dipping, brushing, or spraying. For dipping, immerse the fabric completely for ten minutes and hang to dry. If you prefer brushing, use a wide lay-in brush and apply in a criss-cross pattern to ensure adequate absorption. For spraying, use a Hudson-type sprayer with a medium nozzle setting, spraying in a back and forth pattern from the bottom to the top of the fabric.The Flamex DF Flame Retardant has been approved by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards. For storage, it's recommended to keep Flamex products in non-metallic containers and clean any metal sprayers used immediately after use.Please remember to always read the instructions supplied with any Flamex product and test a sample before using to determine how the fabric will react and to ensure effective flame retardance. The Flamex DF Flame Retardant is comparable to the original Roscoflamex C26, but it's advised not to intermix old and new Flamex products. Choose Flamex DF Flame Retardant for Natural Fiber Fabrics, your reliable solution for fire safety.

Experience the superior protection of the Flamex SF Flame Retardant, expertly engineered by Rosco for synthetic fiber fabrics. This product is specifically designed to overcome the challenges of treating synthetic fabrics, which do not absorb liquids in the same way as natural fibers. Flamex SF is a penetrating treatment that forms a secure bond with the surface of the threads, reaching deep within the weave of the material. This ensures that the flame retardant chemicals are firmly embedded, providing an effective and durable protective treatment. This versatile flame retardant is suitable for a wide array of synthetic fabrics, including polyesters, nylons, acrylics, and rayons, as well as most cotton/synthetic blends. It's an ideal choice for a broad spectrum of scenery properties and costume construction. However, we always recommend testing a sample first to ensure compatibility and effectiveness. Flamex SF leaves no residue or powdery build-up, simplifying the task of ensuring your soft goods and scenic fabrics meet the stringent expectations of Fire Marshalls. It comes premixed and does not require any further dilution. Application methods vary depending on the fabric in use, but Flamex SF can be applied by dipping, brushing, or spraying. One gallon of Flamex SF can treat approximately 500 square feet (46.4 square meters) of fabric. Flamex SF has been approved for use by the California and New York City Fire Marshalls and has been tested according to NFPA 701 standards. For storage, we recommend non-metallic containers to maintain the product's integrity. Please read the instructions supplied with Flamex SF carefully. Rosco offers this product in good faith, but without guarantee, as the materials treated and methods of application are beyond the control of the manufacturer. Always test before using to determine the suitability of Flamex SF for your intended use. Experience the peace of mind that comes with using Flamex SF Flame Retardant, the trusted choice for synthetic fiber fabric protection.

When it comes to enhancing the safety of your raw wood and cellulosic materials, the Flamex WD Flame Retardant is an exceptional choice. This product is specifically designed to render materials such as plywood, board stock, sheet goods, hay, acoustical tile, and other common materials flame retardant. Once the Flamex WD treatment has fully dried, you can freely paint or stain your wood materials without compromising their flame retardance. This flame retardant solution has been premixed for your convenience, eliminating the need for further dilution. The application method and the amount of Flamex WD required may vary depending on the materials you're treating. A single gallon of Flamex WD can effectively treat approximately 150-200 square feet (14-18.5 square meters) of material. For optimal results, you can apply Flamex WD by dipping, brushing, or spraying. Dipping is the most efficient method, requiring a full immersion for ten minutes followed by air drying. Brushing involves using a wide lay-in brush to work the solution into the fibers of the material in a criss-cross pattern. Spraying requires a Hudson-type sprayer with a medium nozzle setting. Regardless of the method, it's crucial to ensure adequate absorption and to apply a second treatment after the first has been absorbed. Flamex WD has earned approval from the California and New York City Fire Marshall and has been tested according to ASTM E84 Class B standards. For storage, it's recommended to keep Flamex products in non-metallic containers and to clean metal sprayers thoroughly after use. Please note that while Rosco offers Flamex WD in good faith, it's essential to read the instructions carefully and test the product before use to ensure its suitability for your intended application. Flamex WD is comparable to the original W40 and should not be intermixed with old Flamex products. This flame retardant solution is ideal for treating a wide range of materials, including plywood, luan, pine boards, hardwood, homosote, hay bales, masonite, and MDF. Enhance the safety of your materials with the reliable and effective Flamex WD Flame Retardant.

The Roscoflamex PC Flame Retardant is a specially formulated solution designed to provide effective and durable fire protection for paper and cardboard materials. This versatile product is ideal for treating a wide range of paper products commonly used in the construction of props and scenery, including letters, copier paper, newspapers, magazines, paper trash, packaging, cardboard boxes, and matte board. This easy-to-use flame retardant has been premixed for your convenience and does not require any further dilution. It can be applied through dipping, brushing, or spraying, depending on your specific needs. For optimal results, multiple light treatments are recommended to minimize any potential discoloration or wrinkling as the paper materials dry. One gallon of Roscoflamex PC Flame Retardant can treat approximately 400 square feet (37 square meters) of material, making it an efficient solution for your fire protection needs. It's important to note that when using a spray application, a substantial portion of the spray may not fall on the fabric, so ensure an adequate amount of the Flamex is absorbed. Roscoflamex PC Flame Retardant has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards, reflecting its high safety and effectiveness. For storage, it is recommended to keep Flamex products in non-metallic containers and thoroughly clean any metal sprayers used immediately after use. Please read the instructions supplied with the Flamex product carefully. Rosco offers these products in good faith, but without guarantee, as the materials treated and methods of application are beyond the control of the manufacturer. Always test a sample to determine how the fabric will react and to test for effective flame retardance. In conclusion, the Roscoflamex PC Flame Retardant is a reliable, safe, and effective solution for protecting your paper and cardboard materials from fire, providing you with peace of mind in your prop and scenery construction projects.

You can enhance the fire resistance of your paint with the Roscoflamex PA Flame Retardant Paint Additive, a clear, un-pigmented solution designed to create a flame-retardant layer on your painted surfaces. This versatile, easy-to-use additive is compatible with most latex or vinyl acrylic paints, making it a valuable addition to your painting supplies.To use, simply add one full jar of Roscoflamex PA to a U.S gallon (3.79L) of water-based paint. This high-quality additive does not alter the flammability of the substrate being painted but instead adds a retardant treatment that slows the spread of fire along the surface. Please note, it's not recommended for use with metallic paints due to potential reactions with metal pigments.The effectiveness of this flame-resistant barrier is dependent on both the fire retardant additive and the thickness of the coating. Ensure the dry paint film is no less than 4 mil in thickness for optimal performance. While Roscoflamex PA is a robust solution, it is not intended to replace other Roscoflamex products. Always treat the substrate material using the appropriate Roscoflamex product for the best results.When using Roscoflamex PA in Rosco Supersaturated paint, add one 8 oz. jar to one quart of undiluted Supersaturated and then dilute this mixture at least 1:1 with water. Mix thoroughly before using. An 8 oz. jar of Roscoflamex PA mixed into one gallon of paint will treat approximately 300 square feet (28 square meters) of material as per paint manufacturer's guidelines.Apply the treated paint by brush, roller, or sprayer as per the paint manufacturer's instructions, ensuring a complete paint film is formed. Roscoflamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class A.Store Flamex products in non-metallic containers and clean metal sprayers thoroughly after use. Always read the instructions supplied with any Flamex product and test before using. Roscoflamex PA is comparable to the original P50. Do not intermix old and new Flamex products. Suitable for treating latex house paint, tinted latex paints, latex primers, Rosco Scenic paints, clear flat or gloss acrylic glazes, and vinyl and acrylic water-based mural paints.

If you're seeking a reliable solution to enhance the fire safety of your painted surfaces, Roscoflamex PA Flame Retardant Paint Additive is an essential product for your safety arsenal. This 8oz (236 ml) jar of clear, un-pigmented additive is expertly formulated to integrate seamlessly with a U.S. gallon (3.79L) of water-based paint, transforming it into a flame-retardant coating without compromising the original color or finish of your paint.Roscoflamex PA is meticulously designed to be compatible with most latex or vinyl acrylic paints, ensuring a wide range of applications. However, it's important to conduct a compatibility test with your specific paint selection to guarantee optimal results. It's worth noting that this additive should not be used with metallic paints, as the metal pigments may adversely react, leading to tarnishing or corrosion.The application of Roscoflamex PA does not alter the inherent flammability of the substrate itself but rather adds a protective layer that effectively slows the propagation of fire across the treated surface. For best results, the additive should be thoroughly mixed into a single U.S. gallon (3.79L) of paint, and the resulting mixture can be diluted to your preference. However, it is crucial to maintain a dry paint film thickness of no less than 4 mil to ensure the efficacy of the fire retardant barrier.When using Roscoflamex PA with Rosco Supersaturated paint, the process requires adding one 8 oz. jar to one quart of undiluted Supersaturated paint, followed by dilution of at least 1:1 with water. A thorough mix is necessary before application.Once treated with Roscoflamex PA, your paint can cover approximately 300 square feet (28 square meters) per gallon, adhering to the paint manufacturer's coverage guidelines. The treated paint can be applied using a brush, roller, or sprayer following the paint manufacturer's instructions, emphasizing the importance of achieving a complete and adequately thick paint film for effective fire retardation.Roscoflamex PA has earned the approval of the California and New York City Fire Marshals and meets the rigorous standards of ASTM E84 Class A testing. For storage, it is recommended to use non-metallic containers and to clean metal sprayers immediately after use to prevent any reaction.As with all safety products, it is crucial to read and understand the instructions provided with Roscoflamex PA. Rosco offers this product with the intent of enhancing fire safety, but the effectiveness is contingent upon proper application and treatment of materials. Users should verify the suitability of Roscoflamex PA for their intended use and always conduct a pre-use test. This product is comparable to the original P50 formulation, but it is advised not to mix old and new Flamex products.Roscoflamex PA is suitable for a variety of water-based paints, including latex house paints, tinted latex paints, latex primers, Rosco Scenic paints, clear flat or gloss acrylic glazes, and vinyl...

Take your fire safety measures to the next level with the Rosco Flamex WD Flame Retardant for Raw Wood. This versatile and easy-to-use solution is specifically designed to treat a wide range of wood and cellulosic materials, including plywood, board stock, sheet goods, hay, acoustical tile, and more. With the Rosco Flamex WD, you can effectively render these common materials flame retardant, enhancing the safety of your space. Once the treatment has fully dried, you can freely paint or stain the wood materials without compromising the flame retardance, offering you both safety and aesthetic flexibility. This durable flame retardant solution comes premixed and requires no further dilution, simplifying your fire prevention efforts. The application method and the amount of Flamex WD required may vary depending on the materials you're treating. One gallon of this effective flame retardant can treat approximately 150-200 square feet (14-18.5 square meters) of material. You can apply it by dipping, brushing, or spraying, depending on your needs. For optimal flame retardance, ensure adequate absorption and consider a second treatment. Rosco Flamex WD has earned the approval of both the California and New York City Fire Marshalls and has been tested according to ASTM E84 Class B standards, attesting to its effectiveness and reliability. For storage, keep Flamex products in non-metallic containers and clean any metal sprayers thoroughly after use. Always read the instructions carefully and test the product before using it. Whether you're treating plywood, luan, pine boards, hardwood, homosote, hay bales, masonite, or MDF, the Rosco Flamex WD Flame Retardant for Raw Wood offers a trusted and efficient solution for enhancing fire safety.

If you're in the market for a reliable and effective flame retardant for paper and cardboard, look no further than the Roscoflamex PC. This product has been specifically formulated to treat a wide range of paper products frequently used in the construction of props and scenery. It's ideal for treating paper items without a wax coating or other water-resistant properties, ensuring a high level of fire protection.Roscoflamex PC comes premixed and doesn't require any further dilution, making it a convenient and user-friendly solution. The application method and the amount required for effective treatment may vary depending on the materials you're working with. It's important to note that some discoloration and wrinkling may occur as the paper materials dry, but this can be minimized with multiple light treatments.One gallon of Roscoflamex PC can treat approximately 400 square feet (37 square meters) of material, offering extensive coverage. The product can be applied by dipping, brushing, or spraying. For dipping, immerse the material completely for ten minutes and then hang to dry. If you prefer brushing, use a wide lay-in brush and apply the solution in a criss-crossing pattern to ensure adequate absorption. For spray application, use a Hudson-type sprayer with a medium nozzle setting and spray in a back and forth pattern, starting at the bottom and working your way up to the top of the material.Roscoflamex PC is approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards, providing assurance of its effectiveness and safety. For storage, it's recommended to keep Flamex products in non-metallic containers and clean any metal sprayers thoroughly after use.This flame retardant solution is perfect for treating a variety of paper and cardboard items, including letters, copier paper, newspapers, magazines, paper trash, packaging, cardboard boxes, and matte board. Please remember to always test a sample before full application to determine the product's suitability and effectiveness. With Roscoflamex PC, you can confidently protect your paper and cardboard materials from fire, ensuring safety and peace of mind.

Roscoflamex PA is a clear, un-pigmented additive for creating a flame retardant paint layer. Add one full jar of Roscoflamex PA to a U.S gallon (3.79L) of water based paint to make your paint coating flame retardant. Roscoflamex PA is compatible in most latex or vinyl acrylic paints but always test with your specific paint choice. Do not use Roscoflamex PA with metallic paints as the metal pigments may react and tarnish or corrode. Roscoflamex PA does NOT alter the flammability of the substrate being painted but only adds a retardant treatment that slows the spread of fire along the surface. Using Roscoflamex PA Roscoflamex PA has been pre-measured and should be added to a single U.S Gallon (3.79L) of paint. Once combined, the paint/Flamex mixture can be diluted as desired but the dry paint film must be no less than 4 mil in thickness. The effectiveness of a fire retardant barrier is dependent on both the fire retardant additive and the thickness of the coating. Roscoflamex PA is not intended to be used in place of other Roscoflamex products. Where possible, always treat the substrate material using the appropriate Roscoflamex product. Note When using Roscoflamex PA in Rosco Supersaturated paint add one 8 oz. jar to one quart of undiluted Supersaturated and then dilute this mixture at least 1:1 with water. Mix thoroughly before using. Coverage 8 oz. of Roscoflamex PA mixed into one gallon of paint will treat approximately 300 square feet (28 square meters) of material as per paint manufacturer's guidelines. Applying Roscoflamex PA Apply treated paint by brush, roller or sprayer as per the paint manufacturer's instructions. Regardless of the method of application, it is vital that a complete paint film is formed and that the dry film thickness of the finished coating is not less than 4 mil. Paint films that are incomplete or are too thin, will not provide a barrier against the spread of fire. Certification and Testing Roscoflamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class A. Storage Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible. Disclaimer Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using. Roscoflamex PA compares to original P50. Do not intermix old and new Flamex products. Use to treat: • Latex house paint • Tinted latex paints • Latex primers • Rosco Scenic paints • Clear Flat or Gloss Acrylic Glazes • Vinyl and Acrylic water...