1674 products were found matching your search for grind in 8 shops:

Make the perfect cup for one with the Grind & Brew Single-Serve Brewer by Cuisinart. Designed to brew the most flavorful coffee with ease and convenience, this compact coffeemaker grinds whole beans to the ideal consistency for optimal flavor using a conical burr grinder, then feeds them into the HomeBarista reusable filter cup to be brewed. The HomeBarista can also be filled with pre-ground coffee or you can use your favorite single-use coffee pod. With three ways to brew and three size options, crafting the perfect cup is easy, fast, and extra enjoyable. Color: Black. Material: Plastic.

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

This pedal is in overall fair condition. The electronics function properly and quietly. The case has has scuffs, ding, chips and scratches. There i...

*Waterproof leather upper *Composite safety toe cap *8" shaft height *Mesh lining *Removable PU footbed *Lightweight EVA midsole *Welt construction *Triple-rib steel shank *Oil-resistant rubber lug outsole

Grind Date De La Soul - LP 881034103628

In his first novel, This Is Horror and Wonderland Award-nominated author Nicholas Day invites you totake a journey into a Hell that is at once uncomfortably familiar, yet unlike anything you’ve everencountered before: a surveyor finds himself pursued by flesh-eating donkeys in the furthest reaches ofOregon’s desert; a mass-murderer leaves the sanctity of his mountain home to pursue a long-lost love,his guide an otherworldly raven possessed by a 19th century American humorist; in nearby Klamath Falls,two estranged childhood friends set off to find a missing father with the help of two aging cowboys; and,a prisoner in her own home sees a vision of death and knows there is no escape. Pain is proselytizing. Death is the one, true faith. And everyone worships in their due time. The Gates of Nihil are wide open and waiting to...GRIND YOUR BONES TO DUST.

Make the perfect cup for one with the Grind and Brew Single-Serve Brewer by Cuisinart. Designed to brew the most flavorful coffee with ease and convenience, this compact coffeemaker grinds whole beans to the ideal consistency for optimal flavor using a conical burr grinder, then feeds them into the HomeBarista reusable filter cup to be brewed. The HomeBarista can also be filled with pre-ground coffee or you can use your favorite single-use coffee pod. With 3-ways to brew and 3-size options, crafting the perfect cup is easy, fast, and extra enjoyable. Color: Black. Material: Plastic.

The Grind and Brew Coffee Maker from Cuisinart automatically grinds the beans right before brewing to produce a fresh and flavorful pot of coffee. Fully programmable with a brushed metal finish. This deluxe 12-cup coffee maker will be right at home in any modern kitchen. Color: Black. Material: Plastic.

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges�ensure precision where it matters most: the sole.� The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control.� The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots.� Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots.� Additionally, the mid-to-higher lofted wedges are equipped with full length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3.� The low bounce option is suited to firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack.� The standard bounce option is extremely versatile, and favors players with a neutral swing style.� The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360 respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin, while providing premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green wh

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

The TaylorMade Milled Grind 3 Wedges feature Raw Face Technology.� By omitting plating from the face and grooves, Raw Face allows for more precise geometry, which in turn optimizes spin and feel.� As an added benefit, the face will begin to rust and impart even more spin. Raised Micro-Ribs positioned between the full grooves add texture to the face, elevating spin rates even higher and improving performance around the greens.� The ribs are specifically designed to provide the control you need to execute even the most difficult short game shots. The MG3 has distinct lines on the sole of the club as a result of the milling process.� The reason TaylorMade mills the sole is because their tolerance levels and standards are so high, that no human can consistently, repeatably produce the desired result.� Milling is extraordinarily precise, and ensures that every sole meets the exact measurements required for perfect turf interaction. Low bounce options in 56�, 58� and 60�, and high bounce options in 52�, 54�, 56�, 58� and 60� complement the standard bounce models.� Low bounce wedges are ideal for firm turf conditions with harder or coarse sand and players with a sweeping swing that take minimal divots.� Standard bounce is the most versatile and is mostly played on firm to normal turf.� While standard bounce wedges are suited for almost all swing types, they favor a neutral swing style with a moderate attack angle.� High bounce wedges are designed for softer turf, fluffy lies and bunkers with soft sand and are ideal for preventing the leading edge from dragging too much in the sand.� High bounce is most beneficial for those who take deep divots with a steep attack angle. TaylorMade MG3 Wedges - Satin RAW Chrome Feature: RAW Face technology omits plating from the face for more spin, precision and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Milled Grind sole ensures precision and consistency where it

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

Hybrid Semi-Modular Synthesizer with 24 Digital Sound Engines, Analog Ladder Filter, 32-Step Sequencer and 16-Voice Poly ChainGRINDThis new hybrid synth is a jack of all trades and you're going to be the master of all of them! The Behringer GRIND is an amazing sound powerhouse that can do anything from percussion, searing lead tones, thunderous bass lines, drones and dreamy soundscapes.Start Your EnginesAt the heart of GRIND is its 24 digital oscillators which includes 15 Mutable Instruments Plaits engines that can be used to create several different sounds from ethereal pads, lush chords and some funky bass lines.Engines include:• Virtual Analog• Wave shaper• FM• Grains• Rain• Noise• Dust• DX7• TD-3 Bassline• Wave Generator• VoxVersatile VCFGRIND's classic 24 dB ladder filter, lets you freely experiment with the Cut-off Frequency, Resonance and Modulation to dial in the perfect sound. The filter Mode switch can be set to either Lo- or Hi-pass for selecting the range of your choice.On-board Sequencer and ArpeggiatorGRIND's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern.Truly Analog LFOThanks to its dedicated and fully analog Low Frequency Oscillator (LFO), GRIND lets you choose from either triangle or square waveforms and features an LED that provides visual feedback of the adjustable LFO Rate.An Amazing ValueGet a hybrid synth that can do it all! The Behringer GRIND is another great addition to your collection and can truly expand the capabilities of your setup!

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

Made from soft 8620 carbon steel, the TaylorMade Milled Grind 3 Hi-Toe Wedges ensure precision where it matters most: the sole. �The wedges feature a taller toe area with an added weight pad that shifts the center of gravity closer to the middle, resulting in optimized launch and spin conditions. TaylorMade utilizes two types of grooves on the Hi-Toe 3 to provide unbelievable control. �The larger ZTP RAW Grooves' radii are engineered to deliver optimal spin on longer shots. �Between the larger grooves, milled ribs add texture to the face, yielding increased spin and improved performance on partial and greenside shots. �Additionally, the mid-to-higher lofted wedges are equipped with full-length scoring lines, bestowing the Hi-Toe 3 with the ability to dispatch similar levels of spin when the face is rotated open. Three bounce options are available in the Hi-Toe 3. �The low bounce option suits firmer turf conditions, bunkers with harder sand, tight lies, and players with a sweeping, shallower angle of attack. �The standard bounce option is highly versatile and favors players with a neutral swing style. �The high bounce wedge is designed for softer turf, fluffy lies, bunkers with soft sand, and players with a steep, digging swing style. The stock shaft and grip are KBS' Hi-Rev 2.0 and Lamkin's Crossline 360, respectively. TaylorMade Milled Grind 3 Hi-Toe Wedges - Chrome Feature: Made from soft 8620 carbon steel Milled Grind milling process maximizes consistency for repeatable performance and turf interaction Hi-Toe design is taller in the toe and is engineered to generate better spin and launch results Toe weight pad moves the center of gravity closer to the middle to optimize launch and spin while providing a premium feel ZTP RAW Grooves with radii designed for optimal spin in various conditions Raised RAW Micro-Ribs between the full grooves add texture for increased spin on shorter shots Full-length scoring lines (54� - 60�) improve spin around the green whe

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla

To meet the demanding performance and consistency standards of TaylorMade's tour professionals, MG1 Wedges are crafted using advanced milling techniques, ensuring the utmost precision and tightest tolerances. The MG's deeper bore and shaft insertion removes weight from the hosel, creating discretionary mass that's relocated more centrally. The newly repositioned center of gravity increases MOI, stability, and forgiveness. TaylorMade MG Milled Grind Wedges Feature: Crafted from soft 8620 carbon steel for outstanding feel Milled construction produces precise sole geometry, leading edges, and scoring lines Deeper bore shaft and insertion allow weight to be relocated for added forgiveness New groove configuration generates elevated spin rates Stock Shaft: True Temper Dynamic Gold Wedge (130g, Low Launch, Low Spin) Stock Grip: Golf Pride Tour Velvet 360 (Grey/Red, 52g, Standard Size) Authorized TaylorMade Retailer Buy TaylorMade Milled Grind Wedges

When it comes to their wedges, tour professionals value consistently high spin rates as much, if not more, than any other trait. This can prove difficult in wet conditions, where even the slightest amount of morning dew can create a barrier between the face and the ball, drastically reducing friction and spin. TaylorMade engineered the MG4�with all-new Spin Tread grooves to eliminate this issue. Spin Tread consists of deep laser-etched channels between the grooves that funnel water away upon impact, ensuring direct contact with the ball. Combined with TaylorMade's Raw Face and Raised Micro-Ribs, the MG4 produces immense levels of spin with virtually no dropoff in wet conditions. TaylorMade finishes the MG4 with True Temper's Dynamic Gold Tour Issue 115 shaft and Lamkin's Crossline 360 grip. TaylorMade MG4 Milled Grind Wedges Feature: Reshaped top line, leading edge, and hosel blend to create a smoother and fuller look for improved shot-making RAW Face technology omits plating from the face for more spin, precision, and feel Raised Micro-Ribs positioned between the full grooves add texture to the face for increased spin Spin Tread deep laser etching between grooves provides a channel for water to escape at impact, maintaining spin in wet conditions Fully machined sole ensures the exact grind and bounce geometry with every wedge produced 6 Grinds available Low Bounce: Modified C-Grind with a leading edge that sits low to the ground when the face is opened; for players who are shallow and open the face angle around the greens Low Bounce V: Ultimate greenside versatility designed for shallow attack angles; aggressive, narrow sole provides the lowest leading edge Standard Bounce: Classic full sole with constant trailing edge relief; gentle 4-way camber with versatility designed for most swing types and players that keep the face square Standard Bounce C: Versatile with added bounce and camber in the middle of the sole with heel and trailing edge relief; designed for pla