90 products were found matching your search for pintle in 3 shops:

The 10-hole pattern hitch is designed to mount on commercial truck body hitch plates only and cannot be used with Pintle mounts which install into receiver style hitches. Can be utilized with our without the air chamber and plunger. The plunger provides minimum clearance with shock absorption. Drop forged heavy duty alloy steel construction. Drawbar Eye Dimensions: 2 in. - 3 in. I.D. with 1-1/4 in. to 1-5/8 in. diameter section.

The 4-hole pattern hitch is designed to mount on commercial truck body hitch plates only and cannot be used with Pintle mounts which install into receiver style hitches. Cast alloy material with 1 hand coupling mechanism makes it easy to use. Coupling latch locks into place when latch is in the down position. Drop forged heavy duty alloy steel construction. Drawbar Eye Dimensions: 2 in. - 3 in. I.D. with 1-1/4 in. to 1-5/8 in. diameter section.

The Hitch Plate for Pintle Mounting with Bottom Channel from Buyers Products features multiple pintle hook mounting positions, two forged D-rings, and a pre-punched hole that fits most trailer electrical connectors. The hitch plate is pre-fabricated and ready to use. The 1/2 in. thick hitch plate includes ICC bumper protection and features a black powder-coated finish for corrosion resistance. It should be both welded and bolted to the frame. Available in several chassis-specific models (not for pickups). Please consult the vehicle/chassis owner's manual before installing. For use with cab and chassis trucks with a nominal 34 in. frame width. Material: Carbon Steel.

The bolt-on 15-Ton Pintle Hook from Buyers Products features tough drop-forged construction and a black powder-coated finish for maximum durability and resistance to corrosion. This versatile hook can handle towing up to 30,000 lbs. Each pintle hook includes mounting information, specs sheet, drilling template and vehicle capacity decal. The pintle hook comes ready to install with the included mounting kit. Material: Carbon Steel.

The bolt-on 20-ton Pintle Hitch from Buyers Products features tough, drop-forged steel construction and a black powder-coated finish for maximum durability and resistance to corrosion. Ideal for contractors and haulers of heavy equipment, the pintle hook will handle maximum gross towing weights of up to 40,000 lbs. Each pintle hook includes mounting information, specs sheet, drilling template, and vehicle capacity decal. It is available with just the pintle hook or sold with a mounting kit.

The single piece drop forged lower jaw is designed with an integral shank to fit 2 in. receiver tubes. Drawbar Eye Dimensions: 2 in. - 3 in. I.D. with 1-1/4 in. to 1-5/8 in. diameter section.

The 6-hole pattern hitch is designed to mount on commercial truck body hitch plates only and cannot be used with Pintle mounts which install into receiver style hitches. Can be utilized with our without the air chamber and plunger. The plunger provides minimum clearance with shock absorption. Drop forged heavy duty alloy steel construction. Drawbar Eye Dimensions: 2 in. - 3 in. I.D. with 1-1/4 in. to 1-5/8 in. diameter section.

Buyers Products 10 Ton Combination Hitch combines both a ball hitch and pintle hook in one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. This hitch is ideal for contractors, tradesmen and haulers who tow a range of medium duty loads, e.g., ditch diggers, skid steers and other similar equipment. The hitch has a 2 in. forged steel ball and is black powder coated for corrosion protection. It is bolt-mounted (drilling template included) and includes a mounting kit.

Buyers Products 10 Ton Combination Hitch combines both a ball hitch and pintle hook in one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. This hitch is ideal for contractors, tradesmen and haulers who tow a range of medium duty loads, e.g., ditch diggers, skid steers and other similar equipment. The hitch has a 2-5/16 in. forged steel ball and is black powder coated for corrosion protection. It is bolt-mounted (drilling template included) and includes a mounting kit.

In agriculture, construction and even military applications, pintle hitches are the trusted product of specialized towing. They are notorious for their high weight capacity and simple design. The basic pintle hitch is essentially a hook and loop, with the hook attached to the vehicle and the loop mounted on the trailer. Because of their simple design, pintle hitches are able to have thicker metal construction and more secure coupling. Curt combination ball and pintle hitches combine both a pintle hook and a standard trailer ball to give you a more complete towing option on your heavy-duty truck or SUV. Combination ball and pintle mounts are available with a shank to mount on a receiver or in the adjustable style to mount on a channel or plate. This particular Curt combination pintle and ball mounts features a ball capacity of 10,000 lbs. and a pintle capacity of 16,000 lbs. A safety pin and bolt kit are also included in this package. The heavyweight towing done with pintle hitches implies a certain amount of wear and tear on your towing equipment and to prepare for this, Cure uses a quality finish on all our pintle mounts, lunette eyes and combination pintle hitches. This combination ball/pintle hook is coated in a black powder coat finish to provide the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day.

This adjustable pintle mount is designed to accept a CURT bolt-on pintle hook or combination ball and pintle. It can be mounted in any 2" x 2" receiver tube opening, offers a gross trailer weight capacity up to 20,000 lbs. and features a total plate height of 3-1/2" (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Material: Carbon Steel.

This adjustable pintle mount is designed to accept a CURT bolt-on pintle hook or combination ball and pintle. It features a series of mounting holes to provide three different mounting heights for the hook and can be mounted in any 2" x 2" receiver tube opening. The bent face plate and solid shank give it the strength to accept a gross trailer weight up to 17,000 lbs. It also features a total plate height of 7-1/4" (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Material: Carbon Steel.

This CURT pintle hook is designed to mount onto a CURT adjustable pintle mount. It features a gross trailer weight capacity of 30,000 lbs. and a vertical load capacity of 8,000 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e. the vehicle, hitch, trailer, etc.). It fits any lunette ring with a 2-1/2 in. or 3 in. inside eye diameter and comes with a safety pin for a secure latch. Material: Steel.

This CURT pintle hook is designed to mount onto a CURT adjustable pintle mount. It features a gross trailer weight capacity of 20,000 lbs. and a vertical load capacity of 4,000 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). It fits any lunette ring with a 2-1/2 in. or 3 in. inside eye diameter and comes with a safety pin for a secure latch. Material: Steel.

"In agriculture, construction and even military applications, pintle hitches are the trusted product of specialized towing. They are notorious for their high weight capacity and simple design. The basic pintle hitch is essentially a hook and loop, with the hook attached to the vehicle and the loop mounted on the trailer. Because of their simple design, pintle hitches are able to have thicker metal construction and more secure coupling. Curt has a wide variety of pintle hitches and pintle-style products to give you a complete solution for your heavy-duty towing needs. This adjustable pintle mount is designed to accept a bolt-on pintle hook or combination ball and pintle. It features a series of mounting holes to provide three different mounting heights for the hook and can be mounted in any 2"" x 2"" receiver tube opening. This pintle mount offers a gross trailer weight capacity up to 10,000 lb. and features a total plate height of 7"", providing up to 6-1/2"" of drop (Note: Not for use in rise position; never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). The heavyweight towing done with pintle hitches implies a certain amount of wear and tear on your towing equipment and to prepare for this, Curt uses a quality finish on all our pintle mounts, lunette eyes and combination pintle hitches. This pintle mount is coated in a tough black carbide powder coat finish to provide the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day."

This CURT pintle hook is designed to mount onto a CURT adjustable pintle mount. It features a gross trailer weight capacity of 10,000 lbs. and a vertical load capacity of 2,000 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). It fits any lunette ring with a 2-1/2 in. or 3 in. inside eye diameter and comes with a safety pin for a secure latch. Material: Steel.

This replacement pintle trailer ball fits any CURT ball and pintle combination and offers a ball capacity of 12,000 lbs. With a drop forged steel construction and hard chrome finish it stands up to the wear and tear of pintle towing applications and regular coupler towing alike. It features a ball diameter of 2-5/16" and comes with fine threads and a nylock nut for secure fastening on any CURT ball and pintle combo.

"In agriculture, construction and even military applications, pintle hitches are the trusted product of specialized towing. They are notorious for their high weight capacity and simple design. The basic pintle hitch is essentially a hook and loop, with the hook attached to the vehicle and the loop mounted on the trailer. Because of their simple design, pintle hitches are able to have thicker metal construction and more secure coupling. Curt has a wide variety of pintle hitches and pintle-style products to give you a complete solution for your heavy-duty towing needs. Our pintle hooks are available in a receiver style, to fit a 2"" x 2"" receiver hitch or in an adjustable style to mount onto an adjustable mounting plate. This heavy-duty pintle hook features a gross trailer weight capacity of 20,000 lb. and a vertical load capacity of 4,000 lb. (Note: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). It fits any lunette ring with a 2-1/2"" or 3"" inside eye diameter and comes with a safety pin for a secure latch. The heavyweight towing done with pintle hitches implies a certain amount of wear and tear on your towing equipment and to prepare for this, Curt uses a quality finish on all our pintle mounts, lunette eyes and combination pintle hitches. This pintle hook is coated in a tough black carbide powder coat finish to provide the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day."

Buyers Products 2 in. Pintle Hook Mount slides into a 2 in. receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. You can mount a pintle hook at either a high or low position to accommodate trailer height. The strong, durable construction features continuous welds and a black powder-coated finish for corrosion resistance. Material: Carbon Steel.

Buyers Products 2 in. Pintle Hook Mount slides into a 2 in. receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. You can mount a pintle hook at either a high or low position to accommodate trailer height. The strong, durable construction features continuous welds and a black powder-coated finish for corrosion resistance. Material: Carbon Steel.