13 products were found matching your search for powerbeam in 1 shops:

Let the PowerBeam ac 300mm 5GHz High-Performance airMAX Bridge elevate your network's reach and reliability. As the latest generation of Ubiquiti Networks' airMAX CPE (Customer Premises Equipment), this device is engineered to maximize wireless capabilities with its uniform beamwidth, which enhances noise immunity by directing RF energy in a focused, tighter beamwidth. This precision targeting is crucial for maintaining signal clarity in areas saturated with competing RF signals.The PowerBeam ac boasts an innovative mechanical design that seamlessly integrates Ubiquiti's InnerFeed technology, merging the radio directly with the antenna's feedhorn. This integration not only streamlines the device's profile, eliminating the need for cumbersome cables, but also significantly reduces signal loss, ensuring peak performance.Equipped with a high-speed processor, the PowerBeam ac delivers superior performance, making it a versatile and cost-effective solution for any deployment. Its airMAX technology, utilizing Ubiquiti's proprietary TDMA protocol, assigns time slots for each client, orchestrated by an intelligent AP controller. This method effectively eradicates hidden node collisions and augments airtime efficiency, offering substantial enhancements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its category.The intelligent QoS (Quality of Service) is designed to prioritize voice and video streaming, ensuring seamless, uninterrupted media delivery. With its high capacity and scalability, the PowerBeam ac is adept at establishing high-speed, carrier-class links over long distances, boasting coverage that exceeds 20+ km.Ubiquiti's next-generation airMAX ac technology propels the benefits of their proprietary TDMA protocol to new heights. The airMAX engine, powered by custom IC, significantly reduces TDMA latency and bolsters network scalability. This custom silicon is the cornerstone of the hardware acceleration capabilities within the airMAX scheduler, which is essential for supporting the high data rates and dense modulation intrinsic to airMAX ac technology.The breakthrough in throughput is evident as the airMAX ac supports high data rates that necessitate dense modulation, such as 256QAM-a marked advancement from the 64QAM used in previous airMAX models. With the implementation of proprietary airMAX ac technology, these devices support real TCP/IP throughput of up to 450+ Mbps, which is nearly triple the throughput of standard airMAX products.In summary, the PowerBeam ac 300mm 5GHz High-Performance airMAX Bridge, with its 22dBi gain and 5-pack offering, is an exceptional choice for anyone looking to extend their wireless network's range with strong, stable, and efficient connectivity across expansive areas.

After setting the industry standard with the innovative all-in-one design of the first-generation NanoBridge, Ubiquiti Networks now introduces the next evolution in CPE technology with the PowerBeam M5 300mm 5GHz High-Performance airMAX Bridge. This pack of five bridges is engineered to maximize wireless network efficiency and range, making it an ideal solution for robust and reliable connectivity.Key Features:- Uniform Beamwidth: The PowerBeam M5 is designed with a uniform beamwidth that maximizes noise immunity, crucial for performance in areas saturated with RF signals.- Advanced Mechanical Design: The PowerBeam M5 boasts a sophisticated mechanical design that enhances durability and functionality.- High-Speed Processor: Equipped with a high-speed processor, the PowerBeam M5 delivers superior performance, ensuring fast and stable connections.Enhanced Noise Immunity:The PowerBeam M5 focuses RF energy in a tighter beamwidth, which not only enhances signal strength but also significantly reduces interference. This targeted directionality is particularly beneficial in environments with numerous competing RF signals.Seamless Integration:Ubiquiti's proprietary InnerFeed technology seamlessly integrates the radio into the antenna's feedhorn, eliminating the need for cables and thereby reducing signal loss. This integrated design contributes to the PowerBeam M5's high-efficiency performance.Cost-Effective Deployment:Combining high performance with an innovative design, the PowerBeam M5 offers a versatile and economical solution for extending the reach of wireless networks.airMAX Technology:The PowerBeam M5 incorporates Ubiquiti's airMAX technology with TDMA protocol, which enhances network performance by assigning specific time slots for data transmission. This method effectively reduces collisions and optimizes airtime efficiency, resulting in improved latency, throughput, and network scalability.Intelligent QoS:With intelligent Quality of Service (QoS) settings, the PowerBeam M5 prioritizes voice and video streaming to ensure seamless multimedia experiences.Long-Distance Connectivity:Designed for long-distance applications, the PowerBeam M5 is capable of establishing high-speed, carrier-class links, extending the reach of your network.Plug and Play Installation:Ease of installation is paramount with the PowerBeam M5. It requires minimal tools for assembly, with a simple wrench being the only tool needed for pole-mounting.Exceptional Antenna Performance:The PowerBeam M5's antenna boasts the highest gain for its size, providing excellent beam directivity and optimal performance in high-noise environments.Proven Software Technology:Ubiquiti's airMAX technology has been tested and proven in millions of deployments across the globe, ensuring reliable performance in a variety of outdoor settings. The airMAX protocol supports an advanced network with high throughput and low latency, making it suitable for multipoint networks.The PowerBeam M5 300mm 5GHz...

For cutting-edge wireless connectivity, Ubiquiti Networks presents the PowerBeam ac 620mm 5GHz High-Performance airMAX Bridge, a pinnacle of innovation in the latest generation of airMAX CPE (Customer Premises Equipment). This robust device is engineered to deliver a uniform beamwidth that maximizes noise immunity, a crucial feature for maintaining signal clarity in areas saturated with competing RF signals.The PowerBeam ac stands out with its integrated design, utilizing Ubiquiti's InnerFeed technology to merge the radio directly with the antenna's feedhorn. This seamless integration not only streamlines the structure, eliminating the need for cumbersome cables but also significantly reduces signal loss, ensuring peak performance.Ubiquiti's advanced airMAX Technology sets the PowerBeam ac apart from conventional Wi-Fi systems. By adopting a Time Division Multiple Access (TDMA) airMAX protocol, the device allocates precise time slots for each client, managed by an intelligent AP controller. This method effectively eradicates hidden node collisions and optimizes airtime efficiency, resulting in substantial enhancements in latency, noise immunity, scalability, and throughput.The PowerBeam ac is designed with intelligent Quality of Service (QoS) settings, giving priority to voice and video streaming to ensure seamless, uninterrupted transmission. Its high capacity and scalability make it an ideal solution for growing networks, while its capability for long-distance links makes it perfect for high-speed, carrier-class connections.At the core of the PowerBeam ac's superior performance is the next-generation airMAX ac technology, which leverages Ubiquiti's proprietary TDMA protocol to further reduce latency and enhance network scalability. The device's custom silicon provides hardware acceleration to the airMAX scheduler, accommodating the high data rates and dense modulation that airMAX ac technology employs.A breakthrough in throughput is achieved with the PowerBeam ac's support for dense modulation techniques, including 256QAM - a significant step up from the 64QAM used in previous airMAX models. This advancement allows the PowerBeam ac to support real TCP/IP throughput of up to 450+ Mbps, nearly tripling the throughput capabilities of standard airMAX products.With a 29dBi gain and over 30 km of coverage, the PowerBeam ac 620mm 5GHz High-Performance airMAX Bridge is a formidable choice for anyone seeking a reliable, long-range wireless bridge solution. Its innovative mechanical design, coupled with high-speed processing, makes it both versatile and cost-effective for deployment in a variety of network configurations. Whether for point-to-point (PtP) or point-to-multipoint (PtMP) networks, the PowerBeam ac by Ubiquiti Networks is a testament to high-quality wireless networking equipment designed for performance and longevity.

Just as Ubiquiti Networks revolutionized the industry with their first-generation NanoBridge, they continue to set the standard with the PowerBeam M2 400mm 2.4GHz High-Performance airMAX Bridge. This all-in-one design functions as a top-tier Customer Premises Equipment (CPE), offering a uniform beamwidth that maximizes noise immunity. The PowerBeam's innovative mechanical design is complemented by a high-speed processor, ensuring superior performance. Its focused RF energy directionality not only enhances signal strength but also significantly improves noise immunity. This feature is particularly beneficial in areas saturated with RF signals of the same or similar frequency.Ubiquiti's proprietary InnerFeed technology seamlessly integrates the radio into the feedhorn of the antenna, eliminating the need for cables and thereby reducing cable losses. This integrated design, coupled with the PowerBeam's high performance and cost-effectiveness, makes it a versatile and economical choice for network deployment.The PowerBeam M2 400mm 2.4GHz High-Performance airMAX Bridge comes equipped with Ubiquiti's Time Division Multiple Access (TDMA) airMAX technology. This advanced protocol schedules pre-designated time slots for each client to send and receive data, effectively eliminating hidden node collisions and maximizing airtime efficiency. This results in significant performance improvements in latency, throughput, and scalability compared to other outdoor systems in its class.With intelligent QoS, priority is given to voice and video for seamless streaming. The PowerBeam is also capable of high-speed, carrier-class links, making it ideal for long-distance connectivity. Its plug-and-play installation requires no tools for assembly, and its high-gain antenna offers exceptional beam performance, even in high-noise environments.Ubiquiti's airMAX technology, proven in millions of deployments worldwide, delivers outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput, and low latency in unlicensed, multipoint networks. The PowerBeam M2 400mm 2.4GHz High-Performance airMAX Bridge is a testament to Ubiquiti's commitment to innovation and excellence in networking technology.

The PowerBeam ac 2.4GHz High-Performance airMAX Bridge by Ubiquiti Networks represents the cutting edge in outdoor wireless network bridging. Designed with a focus on high-performance, this airMAX Bridge is engineered to deliver fast, reliable internet connectivity, even in areas saturated with RF signals. Its dedicated Wi-Fi management system simplifies network optimization, offering a unique advantage over less specialized alternatives.The PowerBeam ac's advanced Noise Immunity feature channels RF energy into a concentrated beamwidth, significantly reducing interference and enhancing signal clarity. This is particularly beneficial in densely populated RF environments, ensuring a stable and robust connection.Ubiquiti's innovative Inner Feed technology seamlessly integrates the radio into the antenna's feed horn, eliminating the need for cumbersome cables and thereby reducing signal loss. This integrated design contributes to the PowerBeam ac's exceptional performance and cost-effectiveness, making it a versatile solution for any deployment scenario.Equipped with the revolutionary airOS 8 operating system, the PowerBeam ac boasts a suite of powerful wireless features. These include support for the airMAX ac protocol, long-range Point-to-Point (PtP) link mode, selectable channel width, automatic channel selection, and the strongest WPA2 security to protect your network.The device's usability is further enhanced by a redesigned user interface, dynamic configuration changes, and instant input validation, all optimized for mobile devices through HTML5 technology. Users can access detailed device statistics and a comprehensive array of diagnostic tools, including RF diagnostics and the airView Spectrum Analyzer.The PowerBeam ac's advanced RF analytics are powered by a multi-radio architecture, with a dedicated secondary radio continuously analyzing the full 2.4 GHz spectrum. This provides real-time reporting on RF information such as error vector magnitude, signal-to-noise and interference diagrams, and carrier to interference-plus-noise ratio histograms.Spectral Analysis with airView is a game-changer, allowing users to identify noise signatures and optimize network design to minimize interference. The PowerBeam ac's spectrum analyzer capabilities are built-in, negating the need for additional equipment for site surveys.For ease of setup, the PowerBeam ac includes a separate Wi-Fi radio, enabling quick configuration via the UNMS App on your mobile device. This app provides instant access to the airOS configuration interface and a range of management options.Ubiquiti's proprietary TDMA airMAX technology underpins the PowerBeam ac, ensuring efficient use of airtime and significantly improving latency, noise immunity, scalability, and throughput. The intelligent QoS prioritizes voice and video streaming, ensuring seamless performance.The PowerBeam ac is designed for long-distance, high-speed links and is capable of delivering carrier-class performance....

Be at the forefront of wireless connectivity with the PowerBeam ac 5GHz High-Performance airMAX Bridge from Ubiquiti Networks. This advanced piece of Customer Premises Equipment (CPE) is designed to deliver superior performance, with a focus on noise immunity and integrated design. The PowerBeam ac operates at a 5GHz frequency, directing RF energy in a concentrated beamwidth. This focused directionality not only enhances signal strength but also significantly improves noise immunity, a critical feature in areas congested with similar frequency RF signals. Ubiquiti's innovative InnerFeed technology integrates the radio directly into the antenna's feedhorn, eliminating the need for cables and thereby reducing cable losses. This integration results in a high-performance, cost-effective solution that is versatile and easy to deploy. The PowerBeam ac is powered by airOS 7, Ubiquiti's revolutionary operating system. This system boasts an array of powerful wireless features, including airMAX ac Protocol Support, Long-Range Point-to-Point (PtP) Link Mode, and Selectable Channel Width. It also offers automatic channel selection, transmit power control, and the strongest WPA2 security. The PowerBeam ac also features advanced RF analytics, thanks to its multi-radio architecture. This system persistently analyzes the full 5GHz spectrum, providing you with the most comprehensive RF analytics in the industry. The PowerBeam ac also comes with airView, a powerful spectrum analyzer that constantly monitors environmental noise, helping you optimize channel selection, network design, and overall wireless performance. Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol, unlike standard Wi-Fi protocol, allows each client to send and receive data using pre-designated timeslots, eliminating hidden node collisions and maximizing airtime efficiency. This results in significant performance improvements in latency, noise immunity, scalability, and throughput. The PowerBeam ac also boasts superior performance, thanks to Ubiquiti's next-generation airMAX ac technology. This technology supports high data rates, which require dense modulation, and can support up to 450+ Mbps real TCP/IP throughput - up to triple the throughput of standard airMAX products. The PowerBeam ac is also designed for easy installation and durability. Its innovative mechanical design includes built-in mechanical tilt and quick assembly features. The hardware is made of galvanized steel that is powder-coated for superior corrosion resistance, ensuring longevity and reliability. In summary, the PowerBeam ac 5GHz High-Performance airMAX Bridge is a powerful, versatile, and cost-effective solution for high-speed, long-range wireless connectivity.

Ubiquiti Networks launches the PowerBeam ac ISO, an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. Improved Noise Immunity The PowerBeam ac ISO directs RF energy in a tighter beamwidth and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Software airOS 7 Sporting an all-new design for improved usability, airOS v7 is the revolutionary operating system for Ubiquiti airMAX ac products. Powerful Wireless Features • airMAX ac Protocol Support • Long-Range Point-to-Point (PtP) Link Mode • Selectable Channel Width - PtP: 10/20/30/40/50/60/80 MHz, PtMP: 10/20/30/40 MHz • Automatic Channel Selection • Transmit Power Control: Automatic/Manual • Automatic Distance Selection (ACK Timing) • Strongest WPA2 Security Usability Enhancements • Dynamic Configuration Changes • Instant Input Validation • HTML5 Technology • Optimization for Mobile Devices • Detailed Device Statistics • Comprehensive Array of Diagnostic Tools, including Ethernet Cabling Test, RF Diagnostics and airView Spectrum Analyzer Advanced RF Analytics airMAX ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and airView Spectrum Analyzer of airOS V7. Real-Time Reporting The Main tab displays the following RF information • Persistent RF Error Vector Magnitude (EVM) constellation diagrams • Carrier to Interference-plus-Noise Ratio (CINR) histograms • Signal-to-Noise Ratio (SNR) time series plots Spectral Analysis airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView performs the following functions • Constantly monitors environmental noise • Collects energy data points in real-time spectral views • Helps optimize channel selection, network design and wireless performance airView runs in the background without disabling the wireless link, so there is no disruption to the network. In airView, there are three spectral views, each of which represents different data. Waterfall Aggregate energy collected for each frequency. Waveform Aggregate energy collected. Ambient Noise Level Background...

Before Ubiquiti Networks revolutionized the industry with their first-generation NanoBridge, the concept of an all-in-one design for an airMAX product functioning as a CPE (Customer Premises Equipment) was unheard of. Now, they've taken it a step further with the latest generation of CPE, the PowerBeam M5 620mm 5GHz High-Performance airMAX Bridge, 29dbi. This high-performance airMAX bridge boasts a uniform beamwidth that significantly enhances noise immunity. By directing RF energy in a more focused beamwidth, the PowerBeam effectively blocks or spatially filters out noise, making it particularly beneficial in areas saturated with other RF signals of the same or similar frequency.One of the standout features of this product is Ubiquiti's innovative InnerFeed technology. This technology integrates the radio directly into the feedhorn of the antenna, eliminating the need for a cable and thereby improving performance by reducing cable losses. The PowerBeam M5 620mm 5GHz High-Performance airMAX Bridge, 29dbi is not just about high performance and innovative mechanical design, it's also about affordability. It's a versatile and cost-effective solution for deploying high-speed, carrier-class links.Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol, which is included in the PowerBeam, is a game-changer. Unlike standard Wi-Fi protocol, this method allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This unique approach eliminates hidden node collisions and maximizes airtime efficiency, resulting in significant performance improvements in latency, throughput, and scalability compared to other outdoor systems in its class.The PowerBeam also prioritizes voice and video to ensure seamless streaming, thanks to its intelligent QoS. Furthermore, it offers high capacity and scalability, making it an ideal choice for those needing to establish high-speed, long-distance links. Whether you're looking to connect two separate networks or extend the range of an existing one, the PowerBeam M5 620mm 5GHz High-Performance airMAX Bridge, 29dbi is a reliable and efficient solution.

Ubiquiti Networks launches the PowerBeam ISO, an airMAX Bridge that is ideal for deployments requiring maximum performance and RF isolation. Improved Noise Immunity The PowerBeam ISO directs RF energy in a tighter beamwidth and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost-effective to deploy. airMAX Technology Included Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability and throughput compared to other outdoor systems in its class. Intelligent QoS Priority assigned to voice/video for seamless streaming. Scalability High capacity and scalability. Long Distance Capable of high-speed, carrier-class links. SoftwareairOS airOS is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high -performance, outdoor multi -point networking.• Protocol Support• Ubiquiti Channelization• Spectral Width Adjustment• ACK Auto-Timing• AAP Technology• Multi-Language Support airView Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. Waterfall Aggregate energy overtime for each frequency. Waveform Aggregate energy collected. Real-time Energy is shown in real-time as a function of frequency. Recording Automate airView to record and report results. airControl airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.• Network Map• Monitor Device Status• Mass Firmware Upgrade• Web UI Access• Manage Groups of Devices• Task Scheduling Hardware Overview Innovative Mechanical Design • Metal-plated interior of rear housing Enhances RF shielding•...

Before the advent of the PowerBeam M5 High Performance 5GHz airMAX Bridge, Ubiquiti Networks revolutionized the all-in-one design concept with their first-generation Nano Bridge, setting a new standard for CPE (Customer Premises Equipment) devices. The PowerBeam M5 is the culmination of this innovation, offering a sophisticated solution for building high-performance point-to-point (PtP) bridging and network backhauls.The PowerBeam M5 stands out with its exceptional Noise Immunity, directing RF energy in a concentrated beamwidth. This focused energy pattern significantly reduces interference, which is crucial in areas saturated with competing RF signals. The result is a more reliable and stable connection, essential for high-demand applications.Ubiquiti's proprietary InnerFeed technology is at the heart of the PowerBeam's Integrated Design. By integrating the radio directly into the feedhorn of the antenna, the need for a connecting cable is eliminated, thereby reducing potential signal losses and enhancing overall performance. This design not only boosts efficiency but also simplifies the installation process, making the PowerBeam a versatile and cost-effective deployment option.The inclusion of Ubiquiti's airMAX Technology sets the PowerBeam M5 apart from conventional Wi-Fi systems. Utilizing a Time Division Multiple Access (TDMA) airMAX protocol, the device ensures that each client has dedicated time slots for communication, managed by an intelligent AP controller. This method eradicates the issue of hidden node collisions and maximizes airtime efficiency, leading to substantial improvements in latency, throughput, and network scalability.Intelligent QoS is another standout feature, prioritizing voice and video traffic to ensure seamless streaming and a high-quality user experience. The PowerBeam M5 is engineered for Long Distance applications, capable of establishing high-speed, carrier-class links that are both high in capacity and scalable.Ubiquiti's airOS firmware technology powers the PowerBeam M5, offering an intuitive user interface that requires minimal training. The firmware's robust architecture supports high-performance outdoor multi-point networking, complete with features such as Protocol Support, Ubiquiti Channelization, Spectral Width Adjustment, ACK Auto-Timing, AAP Technology, and Multi-Language Support.The device also comes equipped with airView, an advanced spectrum analyzer tool integrated into all Ubiquiti M products. airView assists operators in identifying noise signatures and planning networks to minimize interference, with functionalities like Waterfall, Waveform, Real-time spectral views, and automated recording and reporting.For network management, the PowerBeam M5 is compatible with airControl, a web-based application that enables centralized management of Ubiquiti devices. This includes monitoring device status, mass firmware upgrades, and task scheduling, all accessible through a Network Map and Web UI.The Hardware...

When it comes to high-performance wireless connectivity, the PowerBeam ac ISO 500mm 5GHz airMAX Bridge from Ubiquiti Networks stands out with its innovative and high-tech features. This powerful and reliable device is designed for deployments that demand maximum performance and RF isolation, making it an ideal solution for extending the range of your wireless network.The PowerBeam ac ISO is equipped with a uniform beamwidth that maximizes noise immunity, ensuring a stable and strong signal even in areas crowded with other RF signals of the same or similar frequency. Its integrated isolator design further enhances RF isolation, spatially filtering out interference for improved signal quality.One of the key features of this airMAX Bridge is Ubiquiti's InnerFeed technology. This advanced technology integrates the radio into the feedhorn of the antenna, eliminating the need for a cable and thereby reducing cable losses for superior performance.The PowerBeam ac ISO also boasts a high-speed processor that delivers superior performance, supporting high data rates and dense modulation used in airMAX ac technology. This results in improved latency, noise immunity, scalability, and significantly increased throughput performance.The device's innovative mechanical design features a metal-plated interior in the rear housing, enhancing RF shielding for superior RF isolation. This design, coupled with the integrated RF isolator, ensures superior performance even in the most challenging RF environments.Ubiquiti's airMAX technology, proven in millions of deployments worldwide, powers the PowerBeam ac ISO. This technology enables unprecedented scalability, high throughput, and low latency in unlicensed, multipoint networks, making this device a powerful tool for a wide range of high-bandwidth applications such as video surveillance, VoIP, and wireless backhaul.In summary, the PowerBeam ac ISO 500mm 5GHz airMAX Bridge is a durable, high-gain device that offers powerful performance and RF isolation, making it a reliable choice for extending the range and enhancing the quality of your wireless network.

Take your network's performance to new heights with the Ubiquiti Networks PowerBeam ac ISO, a cutting-edge airMAX ac Bridge designed for deployments that demand the utmost in performance and RF isolation. This sleek and modern bridge boasts a high-tech 400mm RF Isolated Reflector and an impressive 25dBi gain, ensuring strong and stable signal coverage even over long distances.The PowerBeam ac ISO stands out with its innovative integrated isolator design, which significantly enhances RF isolation, spatially filtering out interference and directing RF energy in a tighter beamwidth. This feature is crucial in areas saturated with competing RF signals, as it blocks noise and improves noise immunity, providing a clear and uninterrupted connection.Ubiquiti's InnerFeed technology seamlessly integrates the radio into the antenna's feedhorn, eliminating the need for cables and, as a result, reducing cable losses. This integration not only leads to a stylish and streamlined device but also contributes to superior performance.Equipped with the revolutionary airOS v7, the PowerBeam ac ISO offers a user-friendly interface and powerful wireless features, including support for the airMAX ac protocol and versatile channel width options for Point-to-Point (PtP) and Point-to-Multipoint (PtMP) link modes. The software also includes automatic channel selection, transmit power control, and the strongest WPA2 security to keep your network safe.Usability enhancements such as dynamic configuration changes, instant input validation, and optimization for mobile devices make managing your network effortless. Detailed device statistics and a comprehensive array of diagnostic tools, including Ethernet cabling test, RF diagnostics, and the airView Spectrum Analyzer, provide in-depth insights into your network's performance.The advanced RF analytics engine, powered by a dedicated radio, continuously analyzes the full 5 GHz spectrum, offering real-time reporting and detailed RF information. This data helps you make informed decisions for optimizing channel selection and network design, minimizing noise interference.The spectral analysis capabilities of airView are particularly noteworthy, as they run in the background without disrupting the network, allowing you to identify noise signatures and enhance wireless performance. With the firmware upgrade to airOS v7.1, airView transforms into a powerful spectrum analyzer, saving you the expense and hassle of external equipment for site surveys.Ubiquiti's proprietary TDMA airMAX protocol, with its intelligent AP controller, schedules time slots for each client, reducing collisions and maximizing airtime efficiency. This results in significant improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.The next-generation airMAX ac technology, powered by Ubiquiti's custom IC, elevates the TDMA protocol's performance, supporting high data rates and dense modulation. The PowerBeam...

A cutting-edge accessory for your antenna system, the IsoBeam Isolator Radome for PowerBeam 620mm Dish Reflector offers unparalleled isolation performance, making it an ideal choice for co-location deployments of Point-to-Point (PtP) links and backhauls. This sleek, modern device is expertly designed to enhance wind load performance and provide advanced RF energy isolation in a seamlessly integrated design. The IsoBeam Isolator Radome is compatible with a range of dish antennas, including the airFiber AF-5G30-S45, PowerBeam PBE-5AC-620, PowerBeam PBE-M5-620, and RocketDish RD-5G30-LW. Its plug-and-play integration ensures a quick and easy installation process that requires just a single screw, saving you time and effort. One of the standout features of the IsoBeam Isolator Radome is its innovative RF-choke perimeter. This high-tech feature delivers superior noise immunity in co-location deployments, ensuring that your antenna system performs at its best even in challenging conditions. In addition to improving the performance of your antenna system, the IsoBeam Isolator Radome also offers protection against harsh weather conditions. This stylish and elegant device is designed to shield your PowerBeam 620mm Dish Reflector from the elements, ensuring its longevity and reliability. In summary, the IsoBeam Isolator Radome for PowerBeam 620mm Dish Reflector is a high-quality, high-performing antenna accessory that is designed to enhance the performance of your antenna system and protect it from the weather. Its sleek design and advanced features make it a must-have for anyone who needs a reliable and efficient antenna system.