Sono stati trovati 222 prodotti corrispondenti alla tua ricerca per protects in 7 negozi:

Stairville Snap Protector Ring Si 8pcs, Truss-protector set, Can be mounted once onto the truss's main tubes, protecting them from unwanted scratches when laying down/storing, The rings prevent direct contact between the floor and the truss, which protects the surface and prevents noise, Suitable for trusses with main tube diameter from 48-51 mm, Material: PA6 (Nylon), Colour: Silver, Weight: 9.1 g, Contents of set: 8 pieces

Faster shipping. Better service

Nivea Schiuma da barba MEN PROTECTS & CARE 200 ml

Elettricità > Domotica, automatismi e sicurezza > Allarmi e dispositivi di prevenzione e protezione > Ricambi e accessori per allarmi, Il prodotto è venduto nel rispetto delle normative europee da Automazioni&Sicurezza, garantendo qualità e...

Sennheiser HD-300 PROtect, Monitor Headphones, ActiveGard technology protects against loudspeaker peaks above 110 dB, Closed, Circumaural, Impedance: 64 Ohms, Nominal sound pressure level: 108 ± 3 dB SPL / 1 V rms / 1 kHz, Transmission range: 6 -25000 Hz, Harmonic factor <0.1% at 1 kHz, Boundary sound pressure level: 100 dB, Nominal load capacity: 500 mW, Pressing force: 6.0 N ± 0.75 N, Single-sided cable in 1.5m length with 3.5mm jack plug, Weight without cable: 297 g, Includes 6.3 mm adapter

Gewa Floor Protection Protec, Floor Protector, Hard rubber disk with metal sleeve

Thomann Rain Cover BEL6, Rain Cover, For Stairville BEL6, Protects against light rain or liquids (e.g. in clubs, etc.), Simply placed over the spotlight as a cover, Excellent light transmission ensures that the light output is virtually unaffected, Made in Germany@+*Note:* This item is only used to protect against splash water!

Elettricità > Domotica, automatismi e sicurezza > Allarmi e dispositivi di prevenzione e protezione > Rilevatori di movimento, Specifiche tecniche Classificazione Rilevatore di sicurezza con canale radio per suoni di superficie Tipo di rilevatore...

Rode WS11, Windshield for VideoMic NTG, Foam mesh on the inside and synthetic fur on the outside, Acoustically transparent, Protects against noise up to approx. wind force 5 during outdoor recordings, Dimensions (L x D): 125 x 85 mm, Weight: 21 g

K&M 101 Protector, Parquet protector, Suitable for K&M 101 music stands, 9 x 3 mm, K&M No. 01-94-550-55, Quantity: 1 piece

Neumann U89 I mt, Large Diaphragm Studio Microphone@+The U 89 is a studio microphone for universal applications. The headgrille protects a dual-diaphragm capsule. A rotary switch below the headgrille selects from five different polar patterns. Therefore the microphone can be adapted easily to large-surfaced or wide sound sources, or to sound sources to be recorded at a greater distance. @+@+@+The maximum sound pressure level of 134 dB can be increased to 140 dB with a rotary switch. Another rotary switch is provided for lowering the transmission distance below the selectable frequencies 80 Hz or 160 Hz. @+@+@+In addition to the usual directional polar patterns: omnidirectional, cardioid, and figure-8, we have added a hypercardioid and wide-angle cardioid characteristic. When compared to the standard cardioid pattern, the hypercardioid characteristic suppresses sound from the side more efficiently. The wide-angle polar pattern is especially useful when recording large sound sources. @+@+, Polar pattern: Switchable between omnidirectional, cardioid, figure-8, Switchable 10 db attenuation, Universally applicable: Vocals, speakers, overheads, wind instruments, Transmission range 20 Hz ... 20 kHz, Field transfer factor at 1 kHz at 1 kOhm 8 mV / Pa, Nominal impedance: 150 Ohm, Nominal load impedance: 1000 Ohm, Replacement noise level (CCIR 468-3): 28 dB, Spare noise level (DIN / IEC 651): 17 dB-A, Noise level difference (CCIR 468-3): 66 dB, Noise level difference (DIN / IEC 651): 77 dB, Boundary sound pressure level for K <0.5%: 134 dB, Boundary sound pressure level for K <0.5% with pre-attenuation: 140 dB, Maximum output voltage: 800 mV, Dynamic range of the amplifier (DIN / IEC 651): 117 dB, Supply voltage: 48 V ± 4 V, Current consumption: 0.8 mA, Weight: 400 g, Diameter: 46 mm / Length: 185 mm, Colour: Matte black

Faster shipping. Better service

Decksaver Roland Aira VT-4, Dust Cover, Suitable for Roland Aira VT-4, Protects against dust, dirt, liquids and impacts during transport, Milky transparent surface, High quality, Made from polycarbonate, Dimensions (W x H x D): 18.0 x 13.40 x 3.10 cm, Weight: 0.1 kg

Decksaver Decksaver Roland TR-707, Dust Cover, Suitable for Roland TR-707 and TR-727, Protects against dust, dirt, liquids and shocks, Material: polycarbonate, Dimensions (W x H x D): 38.7 x 25 x 3.0 cm, Weight: 0.785 kg, Milky transparent surface@+*Devices not included!*

Decksaver Akai Pro APC40MK2, Dust Cover, Suitable for Akai Pro APC40MK2, Protects against dust, dirt, liquids and impacts, Tailor made, Is placed like a second skin on the equipment, without the cables needing to be disconnected, Material: Polycarbonate, Dimensions (L x W x H): 42.6 x 25.6 x 2.6 cm, Weight: 0.42 kg, Milky transparent surface@+*APC 40 MK2 not included*

Elettricità > Domotica, automatismi e sicurezza > Allarmi e dispositivi di prevenzione e protezione > Rilevatori di movimento, Specifiche tecniche Classificazione Rilevatore di sicurezza elettro-ottico con canale radio Tipo di rilevatore Wireless...

Decksaver NI Maschine Studio, Dust cover, Custom made for the NI Maschine Studio, Protects from dust, dirt, liquids and accidental impact, Material: Polycarbonate, Fits onto the equipment without the need to unplug cables, Milky transparent surface, Dimensions (L x W x H): 43.5 x 35 x 3.5 cm, Weight: 0.575 kg@+*NI Maschine Studio is not included*@+@+

Elettricità > Domotica, automatismi e sicurezza > Allarmi e dispositivi di prevenzione e protezione > Rilevatori di apertura, Specifiche tecniche Classificazione: Rilevatore di sicurezza radio a fissaggio magnetico con vibrazione per canale radio...