49 produkter ble funnet som samsvarer med søket ditt etter minidsp i 8 butikker:

NB! Passer ikke miniDSP standard 2x4 ekstern.This IR remote is the newest version and is preprogrammed for miniDSP products without requiring any learning process. It is plug&play configured with the latest firmware.- miniDSP 2x4HD- SHD Series- DDRC-24/nanoSHARC kit- DDRC88/DDRC22 series/(FW 2.23)- OpenDRC series (all series)- CDSP 8x12/CDSP 8x12DL- miniDSP 2x8/8x8/4x10HD/10x10HD- nanoDIGI 2x8/nanoDIGI 2x8 kit- miniSHARC kit (FW 2.23)Note that Play/Pause/Next/Previous buttons are only enabled for the SHD series.

NB! Husk at du trenger en kalibrert målemikrofon for å gjøre de nødvendige målinger, vår anbefaling er UMIK-1 fra miniDSP.Dette er den ikke-balanserte utgaven, og den benytter vanlige RCA-plugger.PS! Dirac-lisens medfølger ikke og må kjøpes separat på www.minidsp.com. Enheten leveres imidlertid med miniDSP sin egen velfungerende software. Informasjon fra produsentThe miniDSP Flex is the 3rd generation of our popular line of compact 2-in, 4-out audio processors. It retains the powerful floating point processor but rethinks the I/O architecture so we can provide our customers with different input-output versions in this compact chassis. The initial versions are single-ended analog I/O (RCA), balanced analog I/O (TRS) and digital out with superb audiophile specification for your enjoyment.All versions include a set of digital inputs: USB audio, S/PDIF (RCA/optical) and Bluetooth (LDAC/aptX). An OLED front panel display and volume control/encoder knob provides easy control. As always, the Flex series is jam-packed with miniDSP’s tried and proven audio processing functionality: flexible parametric EQ, IIR & FIR filters, crossovers, advanced biquad programming and delay on each output channel. Last but not least, all platforms are easily software-upgradable with Dirac Live®, the world’s premiere room correction system for full range (20~20kHz) tuning.The miniDSP Flex will find a myriad uses in applications ranging from a compact digital stereo preamp through subwoofer integration and optimization to active speakers, home theater and recording studios. You just need to let your creativity do the rest!Hardware FeaturesProcessor: 32-bit floating-point 400MHz Analog Devices SHARC DSPMulti-Core USB Audio processor (XMOS)Bluetooth streaming: LDAC™/aptX™ HD/aptX™/AAC/SBCOptional upgrade to Dirac Live® 3.x Digital Room Correction, Full Range Room Correction (20~20kHz)Audiophile performance: SNR@120dB(A), THD+N @ -110dB (0.0003%)Inputs: Stereo digital (USB Audio/SPDIF/Optical/Bluetooth), stereo analog (Unbalanced RCA)Flexible Output versions: Unbalanced (RCA), Balanced (TRS), Digital (TOSLINK & SPDIF)USB audio recording feature (4xCH processed output via USB audio to record inputs, e.g. Vinyl)White/Black OLED front panel controller with IR control  Product DownloadsProduct Brief - Flex SeriesFlex Series User Manual Dirac Live User ManualWhat's in the box?Digital Audio Processor — Flex based on the I/O configuration selected. No Dirac Live license for default configurationIR remote v212V univeral power supply (UK/EU/US/AU plugs)USB cableOptional ItemsUMIK-1 or UMIK-2 Measurement microphoneDirac Live v3.x Full range license (20~20kHz) / Must be selected in the shopping cart as an option.Microphone tripodTRS to XLR cables (Inputs, Outputs)NOTE: The UMIK-1/2 are measurement microphones approved by Dirac Research. Knowing the major effect a wrong calibration/measurement would have on the final results of Dirac Live tuning, we strongly recommend that you select a...

Sett med 4stk TRS (jack) til RCA (hann).

WI-DG lar deg koble opp dine miniDSP produkter trådløst for enkel kalibrering der selve miniDSP enheten er plassert i f.eks. et teknisk rom eller et rack. Du slipper da å koble deg opp med USB hver gang du skal justere ditt miniDSP produkt som gjør installasjon og endring langt raskere og mer praktisk.Informasjon fra produsent:The WI-DG is a Wifi/Ethernet to USB bridge that is pre-configured for Plug&Play discovery and control over IP networks. The Wi-DG is a tiny adaptor that interfaces to the USB port of a miniDSP hardware unit and acts as a Wi-Fi to USB bridge. Supported miniDSP plugins transparently detect and communicate with the miniDSP via the Wi-DG, enabling control and configuration over the network. Normally, the computer running the appropriate miniDSP plugin is connected directly to the miniDSP hardware unit using a USB cable. With the Wi-DG, however, the computer connects using Wi-Fi in 2 possible modes of operations: Station mode or Access Point mode. Please check out the user manual for more details.The WI-DG also supports Amazon Alexa voice control via our free Alexa Skill as described in this application note. Yet another way to easily control your audio system!Last but not least, all below supported platform can be controlled by miniDSP's free IoS/Android platform for basic control of Preset/Master Volume and active source. Check out our application note for more details.   Features 2.4GHz b/g/n Wifi Router (Access point/Station Mode) Ethernet/Wifi control of miniDSP platforms over plugin/apps Support for voice control via miniDSP's Amazon Alexa SkillProduct Downloads WI-DG Product Datasheet WI-DG User ManualWhat's in the box? 1 x WI-DG interface 1 x 1m microUSB cable 1 x USB power supply with US/UK/EU/AU plugsSupported plugins (IP field & Self discovery) miniDSP 2x4HD (Available) DDRC-24 (Available) miniDSP 2x8/8x8/4x10/10x10 (Available) nanoDIGI 2x8 (Available) C-DSP 6x8 (Available) C-DSP 8x12 (Available) miniSHARC series (Available) nanoSHARC series (Available) OpenDRC series (Available) DDRC-22 series (Future) DDRC-88A/D (Available) nanoAVR HD/HDA (Available) SHD series (Available)Supported platforms for Alexa voice control SHD (Available) 2x4HD (Available) DDRC-24 (Available) miniDSP 2x8/8x8/4x10/10x10 (Available) nanoDIGI 2x8 (Available) C-DSP 6x8 (Available) C-DSP 8x12 (Available) miniSharc series (Available) nanoSHARC (Available) OpenDRC series (Available) DDRC-22 series (Available) DDRC-88A/D (Available) nanoAVR HD/HDA (Available)Setting up WI-DG with your Android/IoS appCheck out our step by step application note to control your miniDSP unit via Android/IoS app.Setting up WI-DG with AlexaCheck out our step by step application note to setup your miniDSP processor for voice control via Amazon Alexa.

miniDSP is pleased to announce the latest merger of miniDSP's trademark digital processing with high quality headphone amplification. Featuring a full ten bands of powerful, flexible parametric EQ in a tiny bus-powered package, the IL-DSP is the mobile audiophile's perfect companion for laptop, tablet, or smartphone (macOS, Windows and Android supported). The inbuilt microphone for voice-calling ensures maximum mobile flexibility.Housed in a light-weight aluminum enclosure, the IL-DSP sports impeccable audio specifications of 120 dB signal-to-noise ratio and 0.0007% THD+N (mid-gain). 30 mW power output per channel is ample for IEMs and most portable headphones. High-resolution PCM and DSD formats are both supported.The ten bands of parametric EQ are configured with miniDSP's easy-to-use computer interface. The fully adjustable peaking and shelving filters allow adjustment of the audio band from the narrowest to the broadest control ranges, with up to 16 dB boost or cut in each band. This combination of DSP power, careful selection of high-quality components and a 32-bit audiophile DAC combine to create an unparalleled portable headphone experience.FeaturesXMOS XCORE200 Multicore processor - Asynchronous USB audioCS43130 32bit DAC, 130dB DR, 0.0007%THD, 30mW power3 button control for various action depending on the mode(Play/Stop/Next/Previous/Vol Up/Vol Down/DSP on&off)On-board digital microphoneWin/Mac OSx pluginPCM/DSD audio streaming modesUSB Audio Class 2.0 with ASIO drivers for Windows, driverless under MAC OSx and Linux Alsa 2.0, Android OTG supportProduct DownloadsIL-DSP DatasheetIL-DSP User Manual What's in the box?1 x IL-DSP headphone amplifier1 x microUSB to USB Type C (15cm), 1 x microUSB to USB C (70cm), 1 x microUSB to USB A(15cm),1 x cable clipUSB ASIO driver, Plugins under the UserDownloads section@import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-137690-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-137690 .so-panel { margin-bottom:30px } #pl-137690 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-137690-0.panel-no-style, #pg-137690-0.panel-has-style > .panel-row-style, #pg-137690-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-137690-0 > .panel-grid-cell , #pg-137690-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pg-137690-0 { margin-bottom:px } #pl-137690 .panel-grid-cell { padding:0 } #pl-137690 .panel-grid .panel-grid-cell-empty { display:none } #pl-137690 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }

NB! Husk at du trenger en kalibrert målemikrofon for å gjøre de nødvendige målinger, vår anbefaling er UMIK-1 fra miniDSP.NB! 1stk plugin medfølger i form av en kupongkode som lar deg bestille 1stk plugin på www.miniDSP.com gratis.Du kan også velge å senere oppgradere din 2x4HD til Dirac Live, et av verdens beste automatiske systemet for automatisk kalibrering. Dette kjøper du bare direkte fra miniDSP.com: https://www.minidsp.com/products/dirac-series/2x4hd-to-ddrc-24.Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subber fra A-til-Å.Informasjon fra produsentMiniDSP 2x4 HD, a USB DAC+DSP in a low cost package powered by a powerful Sharc 400MHz floating point DSPIntroducing the long-awaited “reboot” of miniDSP’s best-selling 2x4 digital audio processor: the miniDSP 2x4 HD! This tiny powerhouse is jam-packed with miniDSP’s tried and proven audio processing functionality: flexible para-metric EQ, Butterworth and Linkwitz-Riley crossovers, advanced biquad pro-gramming, and delay on each output channel. miniDSP’s “one hardware many plugins” concept allows for many interesting future applications!The upgraded on-board 400 MHz Analog Devices SHARC processor also ena-bles substantial processing upgrades previously available only on more ex-pensive platforms, such as 96 kHz internal processing for true high-resolution audio capability and assignable FIR filter taps for sophisticated equalization, crossover, and room correction capabilities. All to be accessed and programmed with miniDSP’s easy-to-use interface software.I/O capabilities get an upgrade too, with the addition of USB audio streaming up to 192 kHz and a TOSLINK digital input. The miniDSP 2x4 HD will find application in full-sized hifi and home theater systems, on desktops, in cars, in recording studios — anywhere a compact, simple, yet surprisingly powerful DSP audio processor is needed.FeaturesADSP21489 400MHz Sharc DSP floating point engineXMOS Xcore200 for USB control and bidirectional audio streaming24 bit ADC/DAC resolutionUnbalanced inputs switchable with a jumper between 4Vrms and 2VrmsToslink digital inputUnbalanced outputs: Max 2VrmsUSB Audio Class 2 Bidirectional streaming with ASIO drivers, driverless under MAC OSx4 preset configuration, recallable via IR, SoftwarePlug&Play USB driver and real time Software configuration using miniDSP plug-insDevice does not required a PC once configuredExternal single 12V supplyProduct DownloadsminiDSP 2x4 HD DatasheetminiDSP 2x4 HD User ManualSoftware plug-in to be purchased separatelyminiDSP 2x4 HD1 plug-inWhat's in the box?1 x MiniDSP 2x4 HD, board assembled and ready to use1 x 12V power supply with UK/EU/US/AU plugs1 x shielded USB cableOptional AccessoriesUMIK-1, unique calibration file mircophone for accurate acoustic measurementsminiDC for Car AudioAudio RCA cablesComparing features miniDSP 2x4miniDSP 2x4 HD 28/56bit Fixed point DSP Engine ADSP12489 400MHz Sharc floating point DSP 24 bit ADC/DAC...

WI-DG lar deg koble opp dine miniDSP produkter trådløst for enkel kalibrering der selve miniDSP enheten er plassert i f.eks. et teknisk rom eller et rack. Du slipper da å koble deg opp med USB hver gang du skal justere ditt miniDSP produkt som gjør installasjon og endring langt raskere og mer praktisk.Informasjon fra produsent:The WI-DG is a Wifi/Ethernet to USB bridge that is pre-configured for Plug&Play discovery and control over IP networks. The Wi-DG is a tiny adaptor that interfaces to the USB port of a miniDSP hardware unit and acts as a Wi-Fi to USB bridge. Supported miniDSP plugins transparently detect and communicate with the miniDSP via the Wi-DG, enabling control and configuration over the network. Normally, the computer running the appropriate miniDSP plugin is connected directly to the miniDSP hardware unit using a USB cable. With the Wi-DG, however, the computer connects using Wi-Fi in 2 possible modes of operations: Station mode or Access Point mode. Please check out the user manual for more details.The WI-DG also supports Amazon Alexa voice control via our free Alexa Skill as described in this application note. Yet another way to easily control your audio system!Last but not least, all below supported platform can be controlled by miniDSP's free IoS/Android platform for basic control of Preset/Master Volume and active source. Check out our application note for more details.   Features 2.4GHz b/g/n Wifi Router (Access point/Station Mode) Ethernet/Wifi control of miniDSP platforms over plugin/apps Support for voice control via miniDSP's Amazon Alexa SkillProduct Downloads WI-DG Product Datasheet WI-DG User ManualWhat's in the box? 1 x WI-DG interface 1 x 1m microUSB cable 1 x USB power supply with US/UK/EU/AU plugsSupported plugins (IP field & Self discovery) miniDSP 2x4HD (Available) DDRC-24 (Available) miniDSP 2x8/8x8/4x10/10x10 (Available) nanoDIGI 2x8 (Available) C-DSP 6x8 (Available) C-DSP 8x12 (Available) miniSHARC series (Available) nanoSHARC series (Available) OpenDRC series (Available) DDRC-22 series (Future) DDRC-88A/D (Available) nanoAVR HD/HDA (Available) SHD series (Available)Supported platforms for Alexa voice control SHD (Available) 2x4HD (Available) DDRC-24 (Available) miniDSP 2x8/8x8/4x10/10x10 (Available) nanoDIGI 2x8 (Available) C-DSP 6x8 (Available) C-DSP 8x12 (Available) miniSharc series (Available) nanoSHARC (Available) OpenDRC series (Available) DDRC-22 series (Available) DDRC-88A/D (Available) nanoAVR HD/HDA (Available)Setting up WI-DG with your Android/IoS appCheck out our step by step application note to control your miniDSP unit via Android/IoS app.Setting up WI-DG with AlexaCheck out our step by step application note to setup your miniDSP processor for voice control via Amazon Alexa.

NB! Passer ikke miniDSP standard 2x4 ekstern.This IR remote is the newest version and is preprogrammed for miniDSP products without requiring any learning process. It is plug&play configured with the latest firmware.- miniDSP 2x4HD- SHD Series- DDRC-24/nanoSHARC kit- DDRC88/DDRC22 series/(FW 2.23)- OpenDRC series (all series)- CDSP 8x12/CDSP 8x12DL- miniDSP 2x8/8x8/4x10HD/10x10HD- nanoDIGI 2x8/nanoDIGI 2x8 kit- miniSHARC kit (FW 2.23)Note that Play/Pause/Next/Previous buttons are only enabled for the SHD series.

NYHET FRA MINIDSP! En fullverdig audioprosessor med full Dirac Live romkorreksjon for Hi-End stereo. Denne SHD versjonen inkluderer et komplett sett digitale (inkl. AES / EBU for profesjonelle brukere), samt analoge (XLR / RCA) for oppkobling av CD-spiller eller en vinylrig. XLR og RCA ut for oppkobling av effekttrinn.I tillegg til dette har spilleren en innebygget streaming spiller fra Volumio, som lar deg spille av alle dine hi-res kilder (forutsetter da at du ripper dine kilder til en harddisk) i full kvalitet og med full kontroll fra iPhone eller tilsvarende. Du kan selvsagt også spille via Spotify og andre streaming-tjenester via Volumio.Dirac Live er regnet som en av verdens fremste romkorreksjonssystemer, og inkorporert i denne 32-bits / 96KHz kraftblokken av en mediaplayer vil rommet ditt spille som aldri før. Systemet benytter miniDSP sin UMIK-1 målemikrofon (selges separat).Greit også å nevne at selv Dirac liker å jobbe under gode betingelser for et optimalt resultat, så vurder gjerne noen akustiske tiltak i samme slengen. En spesiell anbefaling i så måte er våre Dfusor paneler fra DreamScreen som både diffuserer og absorberer. Disse egner seg godt både bak høyttalerne dine, og gjerne på siden og bak lytteposisjonen. Panelene tar seg effektivt av flutter ekko uten av lydenergien i de mer følsomme høyere registre blir avkortet (dvs. lyden blir ikke mutt og innestengt, noe standard absorbenter lett kan føre til).Informasjon fra produsent:OverviewThe miniDSP SHD Series heralds a new era in affordable yet powerful DSP-based network streamers. Welcome to a wealth of onboard processing power enabled by the latest embedded SHARC and ARM processors: Dirac Live room correction, Volumio network streaming, and a full suite of miniDSP plugin power.Better connectivityWe've listened to our customers that asked for more I/O. The top-of-the-line SHD has, in addition to the network streaming port, 3 x digital inputs, USB Audio, and balanced and unbalanced analog inputs. Outputs are analog and digital for all four channels. The all-digital SHD Studio drops the analog I/O but adds AES/EBU digital outputs for professional sound applications.Dirac LiveWe all love great audio. We don't all love being turned into measurement engineers to get it. The easy-to-use Dirac Live Calibration Tool# walks you through simple steps to get good measurements — for great room correction. Dirac Live's sophisticated algorithms intelligently correct frequency and time errors around the whole listening area. Expect improved stereo imaging, greater clarity and realism, more accurate timbre and a deeper, tighter and more accurate bass.# Windows /Mac computer required.Take chargeWe've always believed in letting the end user control the final result. After all, they're your ears. Dirac Live is the perfect balance of automation and control. An interactive control graph allows you to set limits on the frequency range of correction and tailor a target curve to your own heart's (and...

Sett med 4stk TRS (jack) til RCA (hann).

NB! Husk at du trenger en kalibrert målemikrofon for å gjøre de nødvendige målinger, vår anbefaling er UMIK-1 fra miniDSP.NB! 1stk plugin medfølger i form av en kupongkode som lar deg bestille 1stk plugin på www.miniDSP.com gratis.Du kan også velge å senere oppgradere din 2x4HD til Dirac Live, et av verdens beste automatiske systemet for automatisk kalibrering. Dette kjøper du bare direkte fra miniDSP.com: https://www.minidsp.com/products/dirac-series/2x4hd-to-ddrc-24.Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subber fra A-til-Å.Informasjon fra produsentMiniDSP 2x4 HD, a USB DAC+DSP in a low cost package powered by a powerful Sharc 400MHz floating point DSPIntroducing the long-awaited “reboot” of miniDSP’s best-selling 2x4 digital audio processor: the miniDSP 2x4 HD! This tiny powerhouse is jam-packed with miniDSP’s tried and proven audio processing functionality: flexible para-metric EQ, Butterworth and Linkwitz-Riley crossovers, advanced biquad pro-gramming, and delay on each output channel. miniDSP’s “one hardware many plugins” concept allows for many interesting future applications!The upgraded on-board 400 MHz Analog Devices SHARC processor also ena-bles substantial processing upgrades previously available only on more ex-pensive platforms, such as 96 kHz internal processing for true high-resolution audio capability and assignable FIR filter taps for sophisticated equalization, crossover, and room correction capabilities. All to be accessed and programmed with miniDSP’s easy-to-use interface software.I/O capabilities get an upgrade too, with the addition of USB audio streaming up to 192 kHz and a TOSLINK digital input. The miniDSP 2x4 HD will find application in full-sized hifi and home theater systems, on desktops, in cars, in recording studios — anywhere a compact, simple, yet surprisingly powerful DSP audio processor is needed.FeaturesADSP21489 400MHz Sharc DSP floating point engineXMOS Xcore200 for USB control and bidirectional audio streaming24 bit ADC/DAC resolutionUnbalanced inputs switchable with a jumper between 4Vrms and 2VrmsToslink digital inputUnbalanced outputs: Max 2VrmsUSB Audio Class 2 Bidirectional streaming with ASIO drivers, driverless under MAC OSx4 preset configuration, recallable via IR, SoftwarePlug&Play USB driver and real time Software configuration using miniDSP plug-insDevice does not required a PC once configuredExternal single 12V supplyProduct DownloadsminiDSP 2x4 HD DatasheetminiDSP 2x4 HD User ManualSoftware plug-in to be purchased separatelyminiDSP 2x4 HD1 plug-inWhat's in the box?1 x MiniDSP 2x4 HD, board assembled and ready to use1 x 12V power supply with UK/EU/US/AU plugs1 x shielded USB cableOptional AccessoriesUMIK-1, unique calibration file mircophone for accurate acoustic measurementsminiDC for Car AudioAudio RCA cablesComparing features miniDSP 2x4miniDSP 2x4 HD 28/56bit Fixed point DSP Engine ADSP12489 400MHz Sharc floating point DSP 24 bit ADC/DAC...

miniDSP is pleased to announce the latest merger of miniDSP's trademark digital processing with high quality headphone amplification. Featuring a full ten bands of powerful, flexible parametric EQ in a tiny bus-powered package, the IL-DSP is the mobile audiophile's perfect companion for laptop, tablet, or smartphone (macOS, Windows and Android supported). The inbuilt microphone for voice-calling ensures maximum mobile flexibility.Housed in a light-weight aluminum enclosure, the IL-DSP sports impeccable audio specifications of 120 dB signal-to-noise ratio and 0.0007% THD+N (mid-gain). 30 mW power output per channel is ample for IEMs and most portable headphones. High-resolution PCM and DSD formats are both supported.The ten bands of parametric EQ are configured with miniDSP's easy-to-use computer interface. The fully adjustable peaking and shelving filters allow adjustment of the audio band from the narrowest to the broadest control ranges, with up to 16 dB boost or cut in each band. This combination of DSP power, careful selection of high-quality components and a 32-bit audiophile DAC combine to create an unparalleled portable headphone experience.FeaturesXMOS XCORE200 Multicore processor - Asynchronous USB audioCS43130 32bit DAC, 130dB DR, 0.0007%THD, 30mW power3 button control for various action depending on the mode(Play/Stop/Next/Previous/Vol Up/Vol Down/DSP on&off)On-board digital microphoneWin/Mac OSx pluginPCM/DSD audio streaming modesUSB Audio Class 2.0 with ASIO drivers for Windows, driverless under MAC OSx and Linux Alsa 2.0, Android OTG supportProduct DownloadsIL-DSP DatasheetIL-DSP User Manual What's in the box?1 x IL-DSP headphone amplifier1 x microUSB to USB Type C (15cm), 1 x microUSB to USB C (70cm), 1 x microUSB to USB A(15cm),1 x cable clipUSB ASIO driver, Plugins under the UserDownloads section@import url(https://www.avshop.no/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-137690-0-0 { width:100%;width:calc(100% - ( 0 * 30px ) ) } #pl-137690 .so-panel { margin-bottom:30px } #pl-137690 .so-panel:last-of-type { margin-bottom:0px } @media (max-width:780px){ #pg-137690-0.panel-no-style, #pg-137690-0.panel-has-style > .panel-row-style, #pg-137690-0 { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-137690-0 > .panel-grid-cell , #pg-137690-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pg-137690-0 { margin-bottom:px } #pl-137690 .panel-grid-cell { padding:0 } #pl-137690 .panel-grid .panel-grid-cell-empty { display:none } #pl-137690 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }

NB! Husk at du trenger en kalibrert målemikrofon for å gjøre de nødvendige målinger, vår anbefaling er UMIK-1 fra miniDSP.Dette er den ikke-balanserte utgaven, og den benytter vanlige RCA-plugger.PS! Dirac-lisens medfølger ikke og må kjøpes separat på www.minidsp.com. Enheten leveres imidlertid med miniDSP sin egen velfungerende software. Informasjon fra produsentThe miniDSP Flex is the 3rd generation of our popular line of compact 2-in, 4-out audio processors. It retains the powerful floating point processor but rethinks the I/O architecture so we can provide our customers with different input-output versions in this compact chassis. The initial versions are single-ended analog I/O (RCA), balanced analog I/O (TRS) and digital out with superb audiophile specification for your enjoyment.All versions include a set of digital inputs: USB audio, S/PDIF (RCA/optical) and Bluetooth (LDAC/aptX). An OLED front panel display and volume control/encoder knob provides easy control. As always, the Flex series is jam-packed with miniDSP’s tried and proven audio processing functionality: flexible parametric EQ, IIR & FIR filters, crossovers, advanced biquad programming and delay on each output channel. Last but not least, all platforms are easily software-upgradable with Dirac Live®, the world’s premiere room correction system for full range (20~20kHz) tuning.The miniDSP Flex will find a myriad uses in applications ranging from a compact digital stereo preamp through subwoofer integration and optimization to active speakers, home theater and recording studios. You just need to let your creativity do the rest!Hardware FeaturesProcessor: 32-bit floating-point 400MHz Analog Devices SHARC DSPMulti-Core USB Audio processor (XMOS)Bluetooth streaming: LDAC™/aptX™ HD/aptX™/AAC/SBCOptional upgrade to Dirac Live® 3.x Digital Room Correction, Full Range Room Correction (20~20kHz)Audiophile performance: SNR@120dB(A), THD+N @ -110dB (0.0003%)Inputs: Stereo digital (USB Audio/SPDIF/Optical/Bluetooth), stereo analog (Unbalanced RCA)Flexible Output versions: Unbalanced (RCA), Balanced (TRS), Digital (TOSLINK & SPDIF)USB audio recording feature (4xCH processed output via USB audio to record inputs, e.g. Vinyl)White/Black OLED front panel controller with IR control  Product DownloadsProduct Brief - Flex SeriesFlex Series User Manual Dirac Live User ManualWhat's in the box?Digital Audio Processor — Flex based on the I/O configuration selected. No Dirac Live license for default configurationIR remote v212V univeral power supply (UK/EU/US/AU plugs)USB cableOptional ItemsUMIK-1 or UMIK-2 Measurement microphoneDirac Live v3.x Full range license (20~20kHz) / Must be selected in the shopping cart as an option.Microphone tripodTRS to XLR cables (Inputs, Outputs)NOTE: The UMIK-1/2 are measurement microphones approved by Dirac Research. Knowing the major effect a wrong calibration/measurement would have on the final results of Dirac Live tuning, we strongly recommend that you select a...

Avansert, omni-directional kalibrert mikrofon fra miniDSP med USB-tilkobling. Som software kan vi anbefale f.eks. gratisprogrammet REW.Så snart du har mottatt mikrofonen kan du laste ned den unike kalibreringsfilen ved å taste inn serienummeret på denne siden (litt ned på siden): http://www.minidsp.com/products/acoustic-measurement/umik-1. Du laster ned både 0- og 90-graders (for standard vertikale målinger) kalibreringsfil.Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subberInformasjon fra produsentMiniDSP is pleased to introduce the UMIK-2, its second-generation omni-directional acoustic measurement microphone. The UMIK-2 has everything that made the first-generation UMIK-1 one of our best selling products, including a convenient plug-and-play USB connection and a unique calibration file for each microphone to ensure accuracy.However, the UMIK-2 is also a significant upgrade in performance and functionality. A larger 1/2-inch microphone capsule provides lower noise and lower distortion, which is preserved by the 32-bit ADC (analog-to-digital convertor) built into the microphone shell. Furthermore, sample rates are selectable from 44.1 to 192 kHz for compatibility with the widest possible range of measurement and recording software.The UMIK-2 is of course fully compatible with REW (Room EQ Wizard) and Dirac Live (version 3 and later). Driverless operation with macOS, Linux, Android and iOS, and a supplied ASIO driver for Windows ensure simple integration into many other measurement and recording applications. With the UMIK-2, miniDSP once agains stretch the limits of affordable acoustic measurement gear.  Let the measurement fun begin!FeaturesUSB Audio Reference Measurement MicrophoneUnique calibration file for each microphone1/2" capsule on 60 UNS thread32bit 44.1~192kHz recording, Custom Windows ASIO drivers and Plug&Play on Linux/Mac OSxLow noise floor preamps, 120DR ADCPlug&Play compatible with wide range of software, including REW & Dirac Live platformsProduct DownloadsUMIK-2 Product datasheetUMIK-2 User ManualWin Driver download link ( Please read manual for installation details)What's in the box?1 x UMIK-2 microphone1 x shielded USB C (microphone) to USB (standard) cable (2m)1 x mini Tripod + Mic Clamp1 x wind screenUnique Calibration File DownloadAll UMIK-2 are calibrated with a unique calibration file. In addition, a unique auto-generated 90-degree calibration file. To download the calibration files, look for the 7 digit Serial Number found on the body of the microphone.Enter the serial number in the form below (three digits then four digits e.g. 810-XXXX).Your calibration files will automatically download in most browsers. If not, click on the links provided to manually download. Calibration file downloadSerial number:    -  Which calibration file should I use and where to point the UMIK-2?We provide two calibration files to be used depending on your application.- For stereo system (e.g....

Avansert, omni-directional kalibrert mikrofon fra miniDSP med USB-tilkobling. Som software kan vi anbefale f.eks. gratisprogrammet REW.Så snart du har mottatt mikrofonen kan du laste ned den unike kalibreringsfilen ved å taste inn serienummeret på denne siden (litt ned på siden): http://www.minidsp.com/products/acoustic-measurement/umik-1. Du laster ned både 0- og 90-graders (for standard vertikale målinger) kalibreringsfil.Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subberInformasjon fra produsentThe UMIK-1 is an omni-directional USB measurement microphone providing Plug & Play acoustic measurement. From speaker & room acoustic measurement to recording, this microphone provides low noise and accurate results you can rely on. Forget about driver installation, OS compatibility and un-calibrated mics. The Umik-1 is a USB Audio class 1 device automatically recognized by all Operating Systems (Windows/Mac) and Ipad with Camera Connection Kit. It is provided with a unique calibration file based on the serial number to insure an accurate measurement. Combined with our recommended acoustic measurement software, it is the perfect match for a plug&play measurement system.FeaturesWindows/Mac/LinuxAll measurement softwareSpecial features such as calibrated SPL measurement enabled under free Room EQ Wizard (REW) softwareFrequency response: 20 Hz - 20kHz +/-1dB with calibration loadedUSB Audio: USB Audio class 1.0 Driverless interface for Windows, Mac & LinuxProduct DownloadsUMIK-1 Product datasheetUMIK-1 FAQUMIK-1 Application notesWhat's in the box?1 x UMIK-1 microphone1 x shielded USB C (microphone) to USB (standard plug) cable (1.5m)1 x mini Tripod1 x foam wind screenUnique Calibration File DownloadAll UMIK-1 are calibrated with a unique calibration file. In addition, a unique auto-generated 90-degree calibration file for use with surround system applications. To download the calibration files, look for the 7 digit Serial Number found on the body of the microphone.Enter the serial number in the form below (three digits then four digits e.g. 700-XXXX).Your calibration files will automatically download in most browsers. If not, click on the links provided to manually download. Calibration file downloadSerial number:    -  Which calibration file should I use and where to point the UMIK-1?We provide two calibration files to be used depending on your application.- For stereo system (e.g. 2ch dirac live, single speaker measurement), use the 0deg file and point the UMIK-1 at the speakers- For multichannel system (E.g. 5.1/7.1) or a surround application where multiple speakers are spreadout around the room, use the 90deg file and point the UMIK-1 at the ceiling.Recommended by our FriendsThe miniDSP team built long term relationships with the following leading software applications and is proud to showcase them as our recommeded software solutions:REW: miniDSP worked along with John Mulcahy to develop even greater...

Avansert, omni-directional kalibrert mikrofon fra miniDSP med USB-tilkobling. Som software kan vi anbefale f.eks. gratisprogrammet REW.Så snart du har mottatt mikrofonen kan du laste ned den unike kalibreringsfilen ved å taste inn serienummeret på denne siden (litt ned på siden): http://www.minidsp.com/products/acoustic-measurement/umik-1. Du laster ned både 0- og 90-graders (for standard vertikale målinger) kalibreringsfil.Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subberInformasjon fra produsentThe UMIK-1 is an omni-directional USB measurement microphone providing Plug & Play acoustic measurement. From speaker & room acoustic measurement to recording, this microphone provides low noise and accurate results you can rely on. Forget about driver installation, OS compatibility and un-calibrated mics. The Umik-1 is a USB Audio class 1 device automatically recognized by all Operating Systems (Windows/Mac) and Ipad with Camera Connection Kit. It is provided with a unique calibration file based on the serial number to insure an accurate measurement. Combined with our recommended acoustic measurement software, it is the perfect match for a plug&play measurement system.FeaturesWindows/Mac/LinuxAll measurement softwareSpecial features such as calibrated SPL measurement enabled under free Room EQ Wizard (REW) softwareFrequency response: 20 Hz - 20kHz +/-1dB with calibration loadedUSB Audio: USB Audio class 1.0 Driverless interface for Windows, Mac & LinuxProduct DownloadsUMIK-1 Product datasheetUMIK-1 FAQUMIK-1 Application notesWhat's in the box?1 x UMIK-1 microphone1 x shielded USB C (microphone) to USB (standard plug) cable (1.5m)1 x mini Tripod1 x foam wind screenUnique Calibration File DownloadAll UMIK-1 are calibrated with a unique calibration file. In addition, a unique auto-generated 90-degree calibration file for use with surround system applications. To download the calibration files, look for the 7 digit Serial Number found on the body of the microphone.Enter the serial number in the form below (three digits then four digits e.g. 700-XXXX).Your calibration files will automatically download in most browsers. If not, click on the links provided to manually download. Calibration file downloadSerial number:    -  Which calibration file should I use and where to point the UMIK-1?We provide two calibration files to be used depending on your application.- For stereo system (e.g. 2ch dirac live, single speaker measurement), use the 0deg file and point the UMIK-1 at the speakers- For multichannel system (E.g. 5.1/7.1) or a surround application where multiple speakers are spreadout around the room, use the 90deg file and point the UMIK-1 at the ceiling.Recommended by our FriendsThe miniDSP team built long term relationships with the following leading software applications and is proud to showcase them as our recommeded software solutions:REW: miniDSP worked along with John Mulcahy to develop even greater...

Avansert, omni-directional kalibrert mikrofon fra miniDSP med USB-tilkobling. Som software kan vi anbefale f.eks. gratisprogrammet REW.Så snart du har mottatt mikrofonen kan du laste ned den unike kalibreringsfilen ved å taste inn serienummeret på denne siden (litt ned på siden): http://www.minidsp.com/products/acoustic-measurement/umik-1. Du laster ned både 0- og 90-graders (for standard vertikale målinger) kalibreringsfil.Her er en god video som viser hvordan du benytter miniDSP og REW for korreksjon av multiple subberInformasjon fra produsentMiniDSP is pleased to introduce the UMIK-2, its second-generation omni-directional acoustic measurement microphone. The UMIK-2 has everything that made the first-generation UMIK-1 one of our best selling products, including a convenient plug-and-play USB connection and a unique calibration file for each microphone to ensure accuracy.However, the UMIK-2 is also a significant upgrade in performance and functionality. A larger 1/2-inch microphone capsule provides lower noise and lower distortion, which is preserved by the 32-bit ADC (analog-to-digital convertor) built into the microphone shell. Furthermore, sample rates are selectable from 44.1 to 192 kHz for compatibility with the widest possible range of measurement and recording software.The UMIK-2 is of course fully compatible with REW (Room EQ Wizard) and Dirac Live (version 3 and later). Driverless operation with macOS, Linux, Android and iOS, and a supplied ASIO driver for Windows ensure simple integration into many other measurement and recording applications. With the UMIK-2, miniDSP once agains stretch the limits of affordable acoustic measurement gear.  Let the measurement fun begin!FeaturesUSB Audio Reference Measurement MicrophoneUnique calibration file for each microphone1/2" capsule on 60 UNS thread32bit 44.1~192kHz recording, Custom Windows ASIO drivers and Plug&Play on Linux/Mac OSxLow noise floor preamps, 120DR ADCPlug&Play compatible with wide range of software, including REW & Dirac Live platformsProduct DownloadsUMIK-2 Product datasheetUMIK-2 User ManualWin Driver download link ( Please read manual for installation details)What's in the box?1 x UMIK-2 microphone1 x shielded USB C (microphone) to USB (standard) cable (2m)1 x mini Tripod + Mic Clamp1 x wind screenUnique Calibration File DownloadAll UMIK-2 are calibrated with a unique calibration file. In addition, a unique auto-generated 90-degree calibration file. To download the calibration files, look for the 7 digit Serial Number found on the body of the microphone.Enter the serial number in the form below (three digits then four digits e.g. 810-XXXX).Your calibration files will automatically download in most browsers. If not, click on the links provided to manually download. Calibration file downloadSerial number:    -  Which calibration file should I use and where to point the UMIK-2?We provide two calibration files to be used depending on your application.- For stereo system (e.g....

NYHET FRA MINIDSP! En fullverdig audioprosessor med full Dirac Live romkorreksjon for Hi-End stereo. Denne SHD versjonen inkluderer et komplett sett digitale (inkl. AES / EBU for profesjonelle brukere), samt analoge (XLR / RCA) for oppkobling av CD-spiller eller en vinylrig. XLR og RCA ut for oppkobling av effekttrinn.I tillegg til dette har spilleren en innebygget streaming spiller fra Volumio, som lar deg spille av alle dine hi-res kilder (forutsetter da at du ripper dine kilder til en harddisk) i full kvalitet og med full kontroll fra iPhone eller tilsvarende. Du kan selvsagt også spille via Spotify og andre streaming-tjenester via Volumio.Dirac Live er regnet som en av verdens fremste romkorreksjonssystemer, og inkorporert i denne 32-bits / 96KHz kraftblokken av en mediaplayer vil rommet ditt spille som aldri før. Systemet benytter miniDSP sin UMIK-1 målemikrofon (selges separat).Greit også å nevne at selv Dirac liker å jobbe under gode betingelser for et optimalt resultat, så vurder gjerne noen akustiske tiltak i samme slengen. En spesiell anbefaling i så måte er våre Dfusor paneler fra DreamScreen som både diffuserer og absorberer. Disse egner seg godt både bak høyttalerne dine, og gjerne på siden og bak lytteposisjonen. Panelene tar seg effektivt av flutter ekko uten av lydenergien i de mer følsomme høyere registre blir avkortet (dvs. lyden blir ikke mutt og innestengt, noe standard absorbenter lett kan føre til).Informasjon fra produsent:OverviewThe miniDSP SHD Series heralds a new era in affordable yet powerful DSP-based network streamers. Welcome to a wealth of onboard processing power enabled by the latest embedded SHARC and ARM processors: Dirac Live room correction, Volumio network streaming, and a full suite of miniDSP plugin power.Better connectivityWe've listened to our customers that asked for more I/O. The top-of-the-line SHD has, in addition to the network streaming port, 3 x digital inputs, USB Audio, and balanced and unbalanced analog inputs. Outputs are analog and digital for all four channels. The all-digital SHD Studio drops the analog I/O but adds AES/EBU digital outputs for professional sound applications.Dirac LiveWe all love great audio. We don't all love being turned into measurement engineers to get it. The easy-to-use Dirac Live Calibration Tool# walks you through simple steps to get good measurements — for great room correction. Dirac Live's sophisticated algorithms intelligently correct frequency and time errors around the whole listening area. Expect improved stereo imaging, greater clarity and realism, more accurate timbre and a deeper, tighter and more accurate bass.# Windows /Mac computer required.Take chargeWe've always believed in letting the end user control the final result. After all, they're your ears. Dirac Live is the perfect balance of automation and control. An interactive control graph allows you to set limits on the frequency range of correction and tailor a target curve to your own heart's (and...

Schwaiger Minid@T - F-Quick, M/M, 3 M, 3 M, Minid@T, F-Quick, Hvit

Schwaiger Minid@T - F-Quick, M/M, 3 M, 3 M, Minid@T, F-Quick, Hvit